RepoMirrors
/
openssh
mirror of git://anongit.mindrot.org/openssh.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openssh/ChangeLog

4214 lines
183 KiB
Plaintext
Raw Blame History

20131121
- (djm) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/11/08 11:15:19
[bufaux.c bufbn.c buffer.c sftp-client.c sftp-common.c sftp-glob.c]
[uidswap.c] Include stdlib.h for free() as per the man page.
- markus@cvs.openbsd.org 2013/11/13 13:48:20
[ssh-pkcs11.c]
add missing braces found by pedro
- djm@cvs.openbsd.org 2013/11/20 02:19:01
[sshd.c]
delay closure of in/out fds until after "Bad protocol version
identification..." message, as get_remote_ipaddr/get_remote_port
require them open.
- deraadt@cvs.openbsd.org 2013/11/20 20:53:10
[scp.c]
unsigned casts for ctype macros where neccessary
ok guenther millert markus
- deraadt@cvs.openbsd.org 2013/11/20 20:54:10
[canohost.c clientloop.c match.c readconf.c sftp.c]
unsigned casts for ctype macros where neccessary
ok guenther millert markus
- djm@cvs.openbsd.org 2013/11/21 00:45:44
[Makefile.in PROTOCOL PROTOCOL.chacha20poly1305 authfile.c chacha.c]
[chacha.h cipher-chachapoly.c cipher-chachapoly.h cipher.c cipher.h]
[dh.c myproposal.h packet.c poly1305.c poly1305.h servconf.c ssh.1]
[ssh.c ssh_config.5 sshd_config.5] Add a new protocol 2 transport
cipher "chacha20-poly1305@openssh.com" that combines Daniel
Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an
authenticated encryption mode.
Inspired by and similar to Adam Langley's proposal for TLS:
http://tools.ietf.org/html/draft-agl-tls-chacha20poly1305-03
but differs in layout used for the MAC calculation and the use of a
second ChaCha20 instance to separately encrypt packet lengths.
Details are in the PROTOCOL.chacha20poly1305 file.
Feedback markus@, naddy@; manpage bits Loganden Velvindron @ AfriNIC
ok markus@ naddy@
- naddy@cvs.openbsd.org 2013/11/18 05:09:32
[regress/forward-control.sh]
bump timeout to 10 seconds to allow slow machines (e.g. Alpha PC164)
to successfully run this; ok djm@
- djm@cvs.openbsd.org 2013/11/21 03:15:46
[regress/krl.sh]
add some reminders for additional tests that I'd like to implement
- djm@cvs.openbsd.org 2013/11/21 03:16:47
[regress/modpipe.c]
use unsigned long long instead of u_int64_t here to avoid warnings
on some systems portable OpenSSH is built on.
20131110
- (dtucker) [regress/keytype.sh] Populate ECDSA key types to be tested by
querying the ones that are compiled in.
20131109
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/11/09 05:41:34
[regress/test-exec.sh regress/rekey.sh]
Use smaller test data files to speed up tests. Grow test datafiles
where necessary for a specific test.
- (dtucker) [configure.ac kex.c key.c myproposal.h] Test for the presence of
NID_X9_62_prime256v1, NID_secp384r1 and NID_secp521r1 and test that the
latter actually works before using it. Fedora (at least) has NID_secp521r1
that doesn't work (see https://bugzilla.redhat.com/show_bug.cgi?id=1021897).
- (dtucker) [configure.ac] Fix brackets in NID_secp521r1 test.
- (dtucker) [configure.ac] Add missing "test".
- (dtucker) [key.c] Check for the correct defines for NID_secp521r1.
20131108
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/11/08 01:06:14
[regress/rekey.sh]
Rekey less frequently during tests to speed them up
- (djm) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/11/07 11:58:27
[cipher.c cipher.h kex.c kex.h mac.c mac.h servconf.c ssh.c]
Output the effective values of Ciphers, MACs and KexAlgorithms when
the default has not been overridden. ok markus@
- djm@cvs.openbsd.org 2013/11/08 00:39:15
[auth-options.c auth2-chall.c authfd.c channels.c cipher-3des1.c]
[clientloop.c gss-genr.c monitor_mm.c packet.c schnorr.c umac.c]
[sftp-client.c sftp-glob.c]
use calloc for all structure allocations; from markus@
- djm@cvs.openbsd.org 2013/11/08 01:38:11
[version.h]
openssh-6.4
- (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
[contrib/suse/openssh.spec] Update version numbers following release.
- (dtucker) [openbsd-compat/openbsd-compat.h] Add null implementation of
arc4random_stir for platforms that have arc4random but don't have
arc4random_stir (right now this is only OpenBSD -current).
- (dtucker) [kex.c] Only enable CURVE25519_SHA256 if we actually have
EVP_sha256.
- (dtucker) [myproposal.h] Conditionally enable CURVE25519_SHA256.
- (dtucker) [openbsd-compat/bsd-poll.c] Add headers to prevent compile
warnings.
- (dtucker) [Makefile.in configure.ac] Set MALLOC_OPTIONS per platform
and pass in TEST_ENV. use stderr to get polluted
and the stderr-data test to fail.
- (dtucker) [contrib/cygwin/ssh-host-config] Simplify host key generation:
rather than testing and generating each key, call ssh-keygen -A.
Patch from vinschen at redhat.com.
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/11/09 05:41:34
[regress/test-exec.sh regress/rekey.sh]
Use smaller test data files to speed up tests. Grow test datafiles
where necessary for a specific test.
20131107
- (djm) [ssh-pkcs11.c] Bring back "non-constant initialiser" fix (rev 1.5)
that got lost in recent merge.
- (djm) [Makefile.in monitor.c] Missed chunks of curve25519 KEX diff
- (djm) [regress/modpipe.c regress/rekey.sh] Never intended to commit these
- (djm) [configure.ac defines.h] Skip arc4random_stir() calls on platforms
that lack it but have arc4random_uniform()
- (djm) OpenBSD CVS Sync
- markus@cvs.openbsd.org 2013/11/04 11:51:16
[monitor.c]
fix rekeying for KEX_C25519_SHA256; noted by dtucker@
RCSID sync only; I thought this was a merge botch and fixed it already
- markus@cvs.openbsd.org 2013/11/06 16:52:11
[monitor_wrap.c]
fix rekeying for AES-GCM modes; ok deraadt
- djm@cvs.openbsd.org 2013/11/06 23:05:59
[ssh-pkcs11.c]
from portable: s/true/true_val/ to avoid name collisions on dump platforms
RCSID sync only
- (dtucker) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/10/09 23:44:14
[regress/Makefile] (ID sync only)
regression test for sftp request white/blacklisting and readonly mode.
- markus@cvs.openbsd.org 2013/11/02 22:39:53
[regress/kextype.sh]
add curve25519-sha256@libssh.org
- dtucker@cvs.openbsd.org 2013/11/04 12:27:42
[regress/rekey.sh]
Test rekeying with all KexAlgorithms.
- dtucker@cvs.openbsd.org 2013/11/07 00:12:05
[regress/rekey.sh]
Test rekeying for every Cipher, MAC and KEX, plus test every KEX with
the GCM ciphers.
- dtucker@cvs.openbsd.org 2013/11/07 01:12:51
[regress/rekey.sh]
Factor out the data transfer rekey tests
- dtucker@cvs.openbsd.org 2013/11/07 02:48:38
[regress/integrity.sh regress/cipher-speed.sh regress/try-ciphers.sh]
Use ssh -Q instead of hardcoding lists of ciphers or MACs.
- dtucker@cvs.openbsd.org 2013/11/07 03:55:41
[regress/kextype.sh]
Use ssh -Q to get kex types instead of a static list.
- dtucker@cvs.openbsd.org 2013/11/07 04:26:56
[regress/kextype.sh]
trailing space
- (dtucker) [Makefile.in configure.ac] Remove TEST_SSH_SHA256 environment
variable. It's no longer used now that we get the supported MACs from
ssh -Q.
20131104
- (djm) OpenBSD CVS Sync
- markus@cvs.openbsd.org 2013/11/02 20:03:54
[ssh-pkcs11.c]
support pkcs#11 tokes that only provide x509 zerts instead of raw pubkeys;
fixes bz#1908; based on patch from Laurent Barbe; ok djm
- markus@cvs.openbsd.org 2013/11/02 21:59:15
[kex.c kex.h myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
use curve25519 for default key exchange (curve25519-sha256@libssh.org);
initial patch from Aris Adamantiadis; ok djm@
- markus@cvs.openbsd.org 2013/11/02 22:10:15
[kexdhs.c kexecdhs.c]
no need to include monitor_wrap.h
- markus@cvs.openbsd.org 2013/11/02 22:24:24
[kexdhs.c kexecdhs.c]
no need to include ssh-gss.h
- markus@cvs.openbsd.org 2013/11/02 22:34:01
[auth-options.c]
no need to include monitor_wrap.h and ssh-gss.h
- markus@cvs.openbsd.org 2013/11/02 22:39:19
[ssh_config.5 sshd_config.5]
the default kex is now curve25519-sha256@libssh.org
- djm@cvs.openbsd.org 2013/11/03 10:37:19
[roaming_common.c]
fix a couple of function definitions foo() -> foo(void)
(-Wold-style-definition)
- (djm) [kexc25519.c kexc25519c.c kexc25519s.c] Import missed files from
KEX/curve25519 change
20131103
- (dtucker) [openbsd-compat/bsd-misc.c] Include time.h for nanosleep.
From OpenSMTPD where it prevents "implicit declaration" warnings (it's
a no-op in OpenSSH). From chl at openbsd.
- (dtucker) [openbsd-compat/setproctitle.c] Handle error case form the 2nd
vsnprintf. From eric at openbsd via chl@.
- (dtucker) [configure.ac defines.h] Add typedefs for intmax_t and uintmax_t
for platforms that don't have them.
20131030
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/10/29 09:42:11
[key.c key.h]
fix potential stack exhaustion caused by nested certificates;
report by Mateusz Kocielski; ok dtucker@ markus@
- djm@cvs.openbsd.org 2013/10/29 09:48:02
[servconf.c servconf.h session.c sshd_config sshd_config.5]
shd_config PermitTTY to disallow TTY allocation, mirroring the
longstanding no-pty authorized_keys option;
bz#2070, patch from Teran McKinney; ok markus@
- jmc@cvs.openbsd.org 2013/10/29 18:49:32
[sshd_config.5]
pty(4), not pty(7);
20131026
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/10/25 23:04:51
[ssh.c]
fix crash when using ProxyCommand caused by previous commit - was calling
freeaddrinfo(NULL); spotted by sthen@ and Tim Ruehsen, patch by sthen@
20131025
- (djm) [ssh-keygen.c ssh-keysign.c sshconnect1.c sshd.c] Remove
unnecessary arc4random_stir() calls. The only ones left are to ensure
that the PRNG gets a different state after fork() for platforms that
have broken the API.
20131024
- (djm) [auth-krb5.c] bz#2032 - use local username in krb5_kuserok check
rather than full client name which may be of form user@REALM;
patch from Miguel Sanders; ok dtucker@
- (djm) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/10/23 05:40:58
[servconf.c]
fix comment
- djm@cvs.openbsd.org 2013/10/23 23:35:32
[sshd.c]
include local address and port in "Connection from ..." message (only
shown at loglevel>=verbose)
- dtucker@cvs.openbsd.org 2013/10/24 00:49:49
[moduli.c]
Periodically print progress and, if possible, expected time to completion
when screening moduli for DH groups. ok deraadt djm
- dtucker@cvs.openbsd.org 2013/10/24 00:51:48
[readconf.c servconf.c ssh_config.5 sshd_config.5]
Disallow empty Match statements and add "Match all" which matches
everything. ok djm, man page help jmc@
- djm@cvs.openbsd.org 2013/10/24 08:19:36
[ssh.c]
fix bug introduced in hostname canonicalisation commit: don't try to
resolve hostnames when a ProxyCommand is set unless the user has forced
canonicalisation; spotted by Iain Morgan
- (tim) [regress/sftp-perm.sh] We need a shell that understands "! somecmd"
20131023
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/10/20 04:39:28
[ssh_config.5]
document % expansions performed by "Match command ..."
- djm@cvs.openbsd.org 2013/10/20 06:19:28
[readconf.c ssh_config.5]
rename "command" subclause of the recently-added "Match" keyword to
"exec"; it's shorter, clearer in intent and we might want to add the
ability to match against the command being executed at the remote end in
the future.
- djm@cvs.openbsd.org 2013/10/20 09:51:26
[scp.1 sftp.1]
add canonicalisation options to -o lists
- jmc@cvs.openbsd.org 2013/10/20 18:00:13
[ssh_config.5]
tweak the "exec" description, as worded by djm;
- djm@cvs.openbsd.org 2013/10/23 03:03:07
[readconf.c]
Hostname may have %h sequences that should be expanded prior to Match
evaluation; spotted by Iain Morgan
- djm@cvs.openbsd.org 2013/10/23 03:05:19
[readconf.c ssh.c]
comment
- djm@cvs.openbsd.org 2013/10/23 04:16:22
[ssh-keygen.c]
Make code match documentation: relative-specified certificate expiry time
should be relative to current time and not the validity start time.
Reported by Petr Lautrbach; ok deraadt@
20131018
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/10/09 23:44:14
[regress/Makefile regress/sftp-perm.sh]
regression test for sftp request white/blacklisting and readonly mode.
- jmc@cvs.openbsd.org 2013/10/17 07:35:48
[sftp.1 sftp.c]
tweak previous;
- djm@cvs.openbsd.org 2013/10/17 22:08:04
[sshd.c]
include remote port in bad banner message; bz#2162
20131017
- (djm) OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2013/10/15 14:10:25
[ssh.1 ssh_config.5]
tweak previous;
- djm@cvs.openbsd.org 2013/10/16 02:31:47
[readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5]
[sshconnect.c sshconnect.h]
Implement client-side hostname canonicalisation to allow an explicit
search path of domain suffixes to use to convert unqualified host names
to fully-qualified ones for host key matching.
This is particularly useful for host certificates, which would otherwise
need to list unqualified names alongside fully-qualified ones (and this
causes a number of problems).
"looks fine" markus@
- jmc@cvs.openbsd.org 2013/10/16 06:42:25
[ssh_config.5]
tweak previous;
- djm@cvs.openbsd.org 2013/10/16 22:49:39
[readconf.c readconf.h ssh.1 ssh.c ssh_config.5]
s/canonicalise/canonicalize/ for consistency with existing spelling,
e.g. authorized_keys; pointed out by naddy@
- djm@cvs.openbsd.org 2013/10/16 22:58:01
[ssh.c ssh_config.5]
one I missed in previous: s/isation/ization/
- djm@cvs.openbsd.org 2013/10/17 00:30:13
[PROTOCOL sftp-client.c sftp-client.h sftp-server.c sftp.1 sftp.c]
fsync@openssh.com protocol extension for sftp-server
client support to allow calling fsync() faster successful transfer
patch mostly by imorgan AT nas.nasa.gov; bz#1798
"fine" markus@ "grumble OK" deraadt@ "doesn't sound bad to me" millert@
- djm@cvs.openbsd.org 2013/10/17 00:46:49
[ssh.c]
rearrange check to reduce diff against -portable
(Id sync only)
20131015
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/10/09 23:42:17
[sftp-server.8 sftp-server.c]
Add ability to whitelist and/or blacklist sftp protocol requests by name.
Refactor dispatch loop and consolidate read-only mode checks.
Make global variables static, since sftp-server is linked into sshd(8).
ok dtucker@
- djm@cvs.openbsd.org 2013/10/10 00:53:25
[sftp-server.c]
add -Q, -P and -p to usage() before jmc@ catches me
- djm@cvs.openbsd.org 2013/10/10 01:43:03
[sshd.c]
bz#2139: fix re-exec fallback by ensuring that startup_pipe is correctly
updated; ok dtucker@
- djm@cvs.openbsd.org 2013/10/11 02:45:36
[sftp-client.c]
rename flag arguments to be more clear and consistent.
reorder some internal function arguments to make adding additional flags
easier.
no functional change
- djm@cvs.openbsd.org 2013/10/11 02:52:23
[sftp-client.c]
missed one arg reorder
- djm@cvs.openbsd.org 2013/10/11 02:53:45
[sftp-client.h]
obsolete comment
- jmc@cvs.openbsd.org 2013/10/14 14:18:56
[sftp-server.8 sftp-server.c]
tweak previous;
ok djm
- djm@cvs.openbsd.org 2013/10/14 21:20:52
[session.c session.h]
Add logging of session starts in a useful format; ok markus@ feedback and
ok dtucker@
- djm@cvs.openbsd.org 2013/10/14 22:22:05
[readconf.c readconf.h ssh-keysign.c ssh.c ssh_config.5]
add a "Match" keyword to ssh_config that allows matching on hostname,
user and result of arbitrary commands. "nice work" markus@
- djm@cvs.openbsd.org 2013/10/14 23:28:23
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
refactor client config code a little:
add multistate option partsing to readconf.c, similar to servconf.c's
existing code.
move checking of options that accept "none" as an argument to readconf.c
add a lowercase() function and use it instead of explicit tolower() in
loops
part of a larger diff that was ok markus@
- djm@cvs.openbsd.org 2013/10/14 23:31:01
[ssh.c]
whitespace at EOL; pointed out by markus@
- [ssh.c] g/c unused variable.
20131010
- (dtucker) OpenBSD CVS Sync
- sthen@cvs.openbsd.org 2013/09/16 11:35:43
[ssh_config]
Remove gssapi config parts from ssh_config, as was already done for
sshd_config. Req by/ok ajacoutot@
ID SYNC ONLY for portable; kerberos/gssapi is still pretty popular
- djm@cvs.openbsd.org 2013/09/19 00:24:52
[progressmeter.c]
store the initial file offset so the progress meter doesn't freak out
when resuming sftp transfers. bz#2137; patch from Iain Morgan; ok dtucker@`
- djm@cvs.openbsd.org 2013/09/19 00:49:12
[sftp-client.c]
fix swapped pflag and printflag in sftp upload_dir; from Iain Morgan
- djm@cvs.openbsd.org 2013/09/19 01:24:46
[channels.c]
bz#1297 - tell the client (via packet_send_debug) when their preferred
listen address has been overridden by the server's GatewayPorts;
ok dtucker@
- djm@cvs.openbsd.org 2013/09/19 01:26:29
[sshconnect.c]
bz#1211: make BindAddress work with UsePrivilegedPort=yes; patch from
swp AT swp.pp.ru; ok dtucker@
- dtucker@cvs.openbsd.org 2013/10/08 11:42:13
[dh.c dh.h]
Increase the size of the Diffie-Hellman groups requested for a each
symmetric key size. New values from NIST Special Publication 800-57 with
the upper limit specified by RFC4419. Pointed out by Peter Backes, ok
djm@.
20131009
- (djm) [openbsd-compat/arc4random.c openbsd-compat/chacha_private.h] Pull
in OpenBSD implementation of arc4random, shortly to replace the existing
bsd-arc4random.c
- (djm) [openbsd-compat/Makefile.in openbsd-compat/arc4random.c]
[openbsd-compat/bsd-arc4random.c] Replace old RC4-based arc4random
implementation with recent OpenBSD's ChaCha-based PRNG. ok dtucker@,
tested tim@
20130922
- (dtucker) [platform.c platform.h sshd.c] bz#2156: restore Linux oom_adj
setting when handling SIGHUP to maintain behaviour over retart. Patch
from Matthew Ife.
20130918
- (dtucker) [sshd_config] Trailing whitespace; from jstjohn at purdue edu.
20130914
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/08/22 19:02:21
[sshd.c]
Stir PRNG after post-accept fork. The child gets a different PRNG state
anyway via rexec and explicit privsep reseeds, but it's good to be sure.
ok markus@
- mikeb@cvs.openbsd.org 2013/08/28 12:34:27
[ssh-keygen.c]
improve batch processing a bit by making use of the quite flag a bit
more often and exit with a non zero code if asked to find a hostname
in a known_hosts file and it wasn't there;
originally from reyk@, ok djm
- djm@cvs.openbsd.org 2013/08/31 00:13:54
[sftp.c]
make ^w match ksh behaviour (delete previous word instead of entire line)
- deraadt@cvs.openbsd.org 2013/09/02 22:00:34
[ssh-keygen.c sshconnect1.c sshd.c]
All the instances of arc4random_stir() are bogus, since arc4random()
does this itself, inside itself, and has for a very long time.. Actually,
this was probably reducing the entropy available.
ok djm
ID SYNC ONLY for portable; we don't trust other arc4random implementations
to do this right.
- sthen@cvs.openbsd.org 2013/09/07 13:53:11
[sshd_config]
Remove commented-out kerberos/gssapi config options from sample config,
kerberos support is currently not enabled in ssh in OpenBSD. Discussed with
various people; ok deraadt@
ID SYNC ONLY for portable; kerberos/gssapi is still pretty popular
- djm@cvs.openbsd.org 2013/09/12 01:41:12
[clientloop.c]
fix connection crash when sending break (~B) on ControlPersist'd session;
ok dtucker@
- djm@cvs.openbsd.org 2013/09/13 06:54:34
[channels.c]
avoid unaligned access in code that reused a buffer to send a
struct in_addr in a reply; simpler just use use buffer_put_int();
from portable; spotted by and ok dtucker@
20130828
- (djm) [openbsd-compat/bsd-snprintf.c] teach our local snprintf code the
'j' (intmax_t/uintmax_t) and 'z' (size_t/ssize_t) conversions in case we
start to use them in the future.
- (djm) [openbsd-compat/bsd-snprintf.c] #ifdef noytet for intmax_t bits
until we have configure support.
20130821
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/08/06 23:03:49
[sftp.c]
fix some whitespace at EOL
make list of commands an enum rather than a long list of defines
add -a to usage()
- djm@cvs.openbsd.org 2013/08/06 23:05:01
[sftp.1]
document top-level -a option (the -a option to 'get' was already
documented)
- djm@cvs.openbsd.org 2013/08/06 23:06:01
[servconf.c]
add cast to avoid format warning; from portable
- jmc@cvs.openbsd.org 2013/08/07 06:24:51
[sftp.1 sftp.c]
sort -a;
- djm@cvs.openbsd.org 2013/08/08 04:52:04
[sftp.c]
fix two year old regression: symlinking a file would incorrectly
canonicalise the target path. bz#2129 report from delphij AT freebsd.org
- djm@cvs.openbsd.org 2013/08/08 05:04:03
[sftp-client.c sftp-client.h sftp.c]
add a "-l" flag for the rename command to force it to use the silly
standard SSH_FXP_RENAME command instead of the POSIX-rename- like
posix-rename@openssh.com extension.
intended for use in regress tests, so no documentation.
- djm@cvs.openbsd.org 2013/08/09 03:37:25
[sftp.c]
do getopt parsing for all sftp commands (with an empty optstring for
commands without arguments) to ensure consistent behaviour
- djm@cvs.openbsd.org 2013/08/09 03:39:13
[sftp-client.c]
two problems found by a to-be-committed regress test: 1) msg_id was not
being initialised so was starting at a random value from the heap
(harmless, but confusing). 2) some error conditions were not being
propagated back to the caller
- djm@cvs.openbsd.org 2013/08/09 03:56:42
[sftp.c]
enable ctrl-left-arrow and ctrl-right-arrow to move forward/back a word;
matching ksh's relatively recent change.
- djm@cvs.openbsd.org 2013/08/13 18:32:08
[ssh-keygen.c]
typo in error message; from Stephan Rickauer
- djm@cvs.openbsd.org 2013/08/13 18:33:08
[ssh-keygen.c]
another of the same typo
- jmc@cvs.openbsd.org 2013/08/14 08:39:27
[scp.1 ssh.1]
some Bx/Ox conversion;
From: Jan Stary
- djm@cvs.openbsd.org 2013/08/20 00:11:38
[readconf.c readconf.h ssh_config.5 sshconnect.c]
Add a ssh_config ProxyUseFDPass option that supports the use of
ProxyCommands that establish a connection and then pass a connected
file descriptor back to ssh(1). This allows the ProxyCommand to exit
rather than have to shuffle data back and forth and enables ssh to use
getpeername, etc. to obtain address information just like it does with
regular directly-connected sockets. ok markus@
- jmc@cvs.openbsd.org 2013/08/20 06:56:07
[ssh.1 ssh_config.5]
some proxyusefdpass tweaks;
20130808
- (dtucker) [regress/Makefile regress/test-exec.sh] Don't try to use test -nt
since some platforms (eg really old FreeBSD) don't have it. Instead,
run "make clean" before a complete regress run. ok djm.
- (dtucker) [misc.c] Fall back to time(2) at runtime if clock_gettime(
CLOCK_MONOTONIC...) fails. Some older versions of RHEL have the
CLOCK_MONOTONIC define but don't actually support it. Found and tested
by Kevin Brott, ok djm.
- (dtucker) [misc.c] Remove define added for fallback testing that was
mistakenly included in the previous commit.
- (dtucker) [regress/Makefile regress/test-exec.sh] Roll back the -nt
removal. The "make clean" removes modpipe which is built by the top-level
directory before running the tests. Spotted by tim@
- (djm) Release 6.3p1
20130804
- (dtucker) [auth-krb5.c configure.ac openbsd-compat/bsd-misc.h] Add support
for building with older Heimdal versions. ok djm.
20130801
- (djm) [channels.c channels.h] bz#2135: On Solaris, isatty() on a non-
blocking connecting socket will clear any stored errno that might
otherwise have been retrievable via getsockopt(). A hack to limit writes
to TTYs on AIX was triggering this. Since only AIX needs the hack, wrap
it in an #ifdef. Diagnosis and patch from Ivo Raisr.
- (djm) [sshlogin.h] Fix prototype merge botch from 2006; bz#2134
20130725
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/07/20 22:20:42
[krl.c]
fix verification error in (as-yet usused) KRL signature checking path
- djm@cvs.openbsd.org 2013/07/22 05:00:17
[umac.c]
make MAC key, data to be hashed and nonce for final hash const;
checked with -Wcast-qual
- djm@cvs.openbsd.org 2013/07/22 12:20:02
[umac.h]
oops, forgot to commit corresponding header change;
spotted by jsg and jasper
- djm@cvs.openbsd.org 2013/07/25 00:29:10
[ssh.c]
daemonise backgrounded (ControlPersist'ed) multiplexing master to ensure
it is fully detached from its controlling terminal. based on debugging
- djm@cvs.openbsd.org 2013/07/25 00:56:52
[sftp-client.c sftp-client.h sftp.1 sftp.c]
sftp support for resuming partial downloads; patch mostly by Loganaden
Velvindron/AfriNIC with some tweaks by me; feedback and ok dtucker@
"Just be careful" deraadt@
- djm@cvs.openbsd.org 2013/07/25 00:57:37
[version.h]
openssh-6.3 for release
- dtucker@cvs.openbsd.org 2013/05/30 20:12:32
[regress/test-exec.sh]
use ssh and sshd as testdata since it needs to be >256k for the rekey test
- dtucker@cvs.openbsd.org 2013/06/10 21:56:43
[regress/forwarding.sh]
Add test for forward config parsing
- djm@cvs.openbsd.org 2013/06/21 02:26:26
[regress/sftp-cmds.sh regress/test-exec.sh]
unbreak sftp-cmds for renamed test data (s/ls/data/)
- (tim) [sftp-client.c] Use of a gcc extension trips up native compilers on
Solaris and UnixWare. Feedback and OK djm@
- (tim) [regress/forwarding.sh] Fix for building outside source tree.
20130720
- (djm) OpenBSD CVS Sync
- markus@cvs.openbsd.org 2013/07/19 07:37:48
[auth.h kex.h kexdhs.c kexecdhs.c kexgexs.c monitor.c servconf.c]
[servconf.h session.c sshd.c sshd_config.5]
add ssh-agent(1) support to sshd(8); allows encrypted hostkeys,
or hostkeys on smartcards; most of the work by Zev Weiss; bz #1974
ok djm@
- djm@cvs.openbsd.org 2013/07/20 01:43:46
[umac.c]
use a union to ensure correct alignment; ok deraadt
- djm@cvs.openbsd.org 2013/07/20 01:44:37
[ssh-keygen.c ssh.c]
More useful error message on missing current user in /etc/passwd
- djm@cvs.openbsd.org 2013/07/20 01:50:20
[ssh-agent.c]
call cleanup_handler on SIGINT when in debug mode to ensure sockets
are cleaned up on manual exit; bz#2120
- djm@cvs.openbsd.org 2013/07/20 01:55:13
[auth-krb5.c gss-serv-krb5.c gss-serv.c]
fix kerberos/GSSAPI deprecation warnings and linking; "looks okay" millert@
20130718
- (djm) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/06/10 19:19:44
[readconf.c]
revert 1.203 while we investigate crashes reported by okan@
- guenther@cvs.openbsd.org 2013/06/17 04:48:42
[scp.c]
Handle time_t values as long long's when formatting them and when
parsing them from remote servers.
Improve error checking in parsing of 'T' lines.
ok dtucker@ deraadt@
- markus@cvs.openbsd.org 2013/06/20 19:15:06
[krl.c]
don't leak the rdata blob on errors; ok djm@
- djm@cvs.openbsd.org 2013/06/21 00:34:49
[auth-rsa.c auth.h auth2-hostbased.c auth2-pubkey.c monitor.c]
for hostbased authentication, print the client host and user on
the auth success/failure line; bz#2064, ok dtucker@
- djm@cvs.openbsd.org 2013/06/21 00:37:49
[ssh_config.5]
explicitly mention that IdentitiesOnly can be used with IdentityFile
to control which keys are offered from an agent.
- djm@cvs.openbsd.org 2013/06/21 05:42:32
[dh.c]
sprinkle in some error() to explain moduli(5) parse failures
- djm@cvs.openbsd.org 2013/06/21 05:43:10
[scp.c]
make this -Wsign-compare clean after time_t conversion
- djm@cvs.openbsd.org 2013/06/22 06:31:57
[scp.c]
improved time_t overflow check suggested by guenther@
- jmc@cvs.openbsd.org 2013/06/27 14:05:37
[ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
do not use Sx for sections outwith the man page - ingo informs me that
stuff like html will render with broken links;
issue reported by Eric S. Raymond, via djm
- markus@cvs.openbsd.org 2013/07/02 12:31:43
[dh.c]
remove extra whitespace
- djm@cvs.openbsd.org 2013/07/12 00:19:59
[auth-options.c auth-rsa.c bufaux.c buffer.h channels.c hostfile.c]
[hostfile.h mux.c packet.c packet.h roaming_common.c serverloop.c]
fix pointer-signedness warnings from clang/llvm-3.3; "seems nice" deraadt@
- djm@cvs.openbsd.org 2013/07/12 00:20:00
[sftp.c ssh-keygen.c ssh-pkcs11.c]
fix pointer-signedness warnings from clang/llvm-3.3; "seems nice" deraadt@
- djm@cvs.openbsd.org 2013/07/12 00:43:50
[misc.c]
in ssh_gai_strerror() don't fallback to strerror for EAI_SYSTEM when
errno == 0. Avoids confusing error message in some broken resolver
cases. bz#2122 patch from plautrba AT redhat.com; ok dtucker
- djm@cvs.openbsd.org 2013/07/12 05:42:03
[ssh-keygen.c]
do_print_resource_record() can never be called with a NULL filename, so
don't attempt (and bungle) asking for one if it has not been specified
bz#2127 ok dtucker@
- djm@cvs.openbsd.org 2013/07/12 05:48:55
[ssh.c]
set TCP nodelay for connections started with -N; bz#2124 ok dtucker@
- schwarze@cvs.openbsd.org 2013/07/16 00:07:52
[scp.1 sftp-server.8 ssh-keyscan.1 ssh-keysign.8 ssh-pkcs11-helper.8]
use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@
- djm@cvs.openbsd.org 2013/07/18 01:12:26
[ssh.1]
be more exact wrt perms for ~/.ssh/config; bz#2078
20130702
- (dtucker) [contrib/cygwin/README contrib/cygwin/ssh-host-config
contrib/cygwin/ssh-user-config] Modernizes and improve readability of
the Cygwin README file (which hasn't been updated for ages), drop
unsupported OSes from the ssh-host-config help text, and drop an
unneeded option from ssh-user-config. Patch from vinschen at redhat com.
20130610
- (djm) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/06/07 15:37:52
[channels.c channels.h clientloop.c]
Add an "ABANDONED" channel state and use for mux sessions that are
disconnected via the ~. escape sequence. Channels in this state will
be able to close if the server responds, but do not count as active channels.
This means that if you ~. all of the mux clients when using ControlPersist
on a broken network, the backgrounded mux master will exit when the
Control Persist time expires rather than hanging around indefinitely.
bz#1917, also reported and tested by tedu@. ok djm@ markus@.
- (dtucker) [Makefile.in configure.ac fixalgorithms] Remove unsupported
algorithms (Ciphers, MACs and HostKeyAlgorithms) from man pages.
- (dtucker) [myproposal.h] Do not advertise AES GSM ciphers if we don't have
the required OpenSSL support. Patch from naddy at freebsd.
- (dtucker) [myproposal.h] Make the conditional algorithm support consistent
and add some comments so it's clear what goes where.
20130605
- (dtucker) [myproposal.h] Enable sha256 kex methods based on the presence of
the necessary functions, not from the openssl version.
- (dtucker) [contrib/ssh-copy-id] bz#2117: Use portable operator in test.
Patch from cjwatson at debian.
- (dtucker) [regress/forwarding.sh] For (as yet unknown) reason, the
forwarding test is extremely slow copying data on some machines so switch
back to copying the much smaller ls binary until we can figure out why
this is.
- (dtucker) [Makefile.in] append $CFLAGS to compiler options when building
modpipe in case there's anything in there we need.
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/06/02 21:01:51
[channels.h]
typo in comment
- dtucker@cvs.openbsd.org 2013/06/02 23:36:29
[clientloop.h clientloop.c mux.c]
No need for the mux cleanup callback to be visible so restore it to static
and call it through the detach_user function pointer. ok djm@
- dtucker@cvs.openbsd.org 2013/06/03 00:03:18
[mac.c]
force the MAC output to be 64-bit aligned so umac won't see unaligned
accesses on strict-alignment architectures. bz#2101, patch from
tomas.kuthan at oracle.com, ok djm@
- dtucker@cvs.openbsd.org 2013/06/04 19:12:23
[scp.c]
use MAXPATHLEN for buffer size instead of fixed value. ok markus
- dtucker@cvs.openbsd.org 2013/06/04 20:42:36
[sftp.c]
Make sftp's libedit interface marginally multibyte aware by building up
the quoted string by character instead of by byte. Prevents failures
when linked against a libedit built with wide character support (bz#1990).
"looks ok" djm
- dtucker@cvs.openbsd.org 2013/06/05 02:07:29
[mux.c]
fix leaks in mux error paths, from Zhenbo Xu, found by Melton. bz#1967,
ok djm
- dtucker@cvs.openbsd.org 2013/06/05 02:27:50
[sshd.c]
When running sshd -D, close stderr unless we have explicitly requesting
logging to stderr. From james.hunt at ubuntu.com via bz#1976, djm's patch
so, err, ok dtucker.
- dtucker@cvs.openbsd.org 2013/06/05 12:52:38
[sshconnect2.c]
Fix memory leaks found by Zhenbo Xu and the Melton tool. bz#1967, ok djm
- dtucker@cvs.openbsd.org 2013/06/05 22:00:28
[readconf.c]
plug another memleak. bz#1967, from Zhenbo Xu, detected by Melton, ok djm
- (dtucker) [configure.ac sftp.c openbsd-compat/openbsd-compat.h] Cater for
platforms that don't have multibyte character support (specifically,
mblen).
20130602
- (tim) [Makefile.in] Make Solaris, UnixWare, & OpenServer linkers happy
linking regress/modpipe.
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/06/02 13:33:05
[progressmeter.c]
Add misc.h for monotime prototype. (ID sync only).
- dtucker@cvs.openbsd.org 2013/06/02 13:35:58
[ssh-agent.c]
Make parent_alive_interval time_t to avoid signed/unsigned comparison
- (dtucker) [configure.ac] sys/un.h needs sys/socket.h on some platforms
to prevent noise from configure. Patch from Nathan Osman. (bz#2114).
- (dtucker) [configure.ac] bz#2111: don't try to use lastlog on Android.
Patch from Nathan Osman.
- (tim) [configure.ac regress/Makefile] With rev 1.47 of test-exec.sh we
need a shell that can handle "[ file1 -nt file2 ]". Rather than keep
dealing with shell portability issues in regression tests, we let
configure find us a capable shell on those platforms with an old /bin/sh.
- (tim) [aclocal.m4] Enhance OSSH_CHECK_CFLAG_COMPILE to check stderr.
feedback and ok dtucker
- (tim) [regress/sftp-chroot.sh] skip if no sudo. ok dtucker
- (dtucker) [configure.ac] Some platforms need sys/types.h before sys/un.h.
- (dtucker) [configure.ac] Some other platforms need sys/types.h before
sys/socket.h.
20130601
- (dtucker) [configure.ac openbsd-compat/xcrypt.c] bz#2112: fall back to
using openssl's DES_crypt function on platorms that don't have a native
one, eg Android. Based on a patch from Nathan Osman.
- (dtucker) [configure.ac defines.h] Test for fd_mask, howmany and NFDBITS
rather than trying to enumerate the plaforms that don't have them.
Based on a patch from Nathan Osman, with help from tim@.
- (dtucker) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/05/17 00:13:13
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
- djm@cvs.openbsd.org 2013/05/19 02:38:28
[auth2-pubkey.c]
fix failure to recognise cert-authority keys if a key of a different type
appeared in authorized_keys before it; ok markus@
- djm@cvs.openbsd.org 2013/05/19 02:42:42
[auth.h auth.c key.c monitor.c auth-rsa.c auth2.c auth1.c key.h]
Standardise logging of supplemental information during userauth. Keys
and ruser is now logged in the auth success/failure message alongside
the local username, remote host/port and protocol in use. Certificates
contents and CA are logged too.
Pushing all logging onto a single line simplifies log analysis as it is
no longer necessary to relate information scattered across multiple log
entries. "I like it" markus@
- dtucker@cvs.openbsd.org 2013/05/31 12:28:10
[ssh-agent.c]
Use time_t where appropriate. ok djm
- dtucker@cvs.openbsd.org 2013/06/01 13:15:52
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
channels.c sandbox-systrace.c]
Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
keepalives and rekeying will work properly over clock steps. Suggested by
markus@, "looks good" djm@.
- dtucker@cvs.openbsd.org 2013/06/01 20:59:25
[scp.c sftp-client.c]
Replace S_IWRITE, which isn't standardized, with S_IWUSR, which is. Patch
from Nathan Osman via bz#2085. ok deraadt.
- dtucker@cvs.openbsd.org 2013/06/01 22:34:50
[sftp-client.c]
Update progressmeter when data is acked, not when it's sent. bz#2108, from
Debian via Colin Watson, ok djm@
- (dtucker) [M auth-chall.c auth-krb5.c auth-pam.c cipher-aes.c cipher-ctr.c
groupaccess.c loginrec.c monitor.c monitor_wrap.c session.c sshd.c
sshlogin.c uidswap.c openbsd-compat/bsd-cygwin_util.c
openbsd-compat/getrrsetbyname-ldns.c openbsd-compat/port-aix.c
openbsd-compat/port-linux.c] Replace portable-specific instances of xfree
with the equivalent calls to free.
- (dtucker) [configure.ac misc.c] Look for clock_gettime in librt and fall
back to time(NULL) if we can't find it anywhere.
- (dtucker) [sandbox-seccomp-filter.c] Allow clock_gettimeofday.
20130529
- (dtucker) [configure.ac openbsd-compat/bsd-misc.h] bz#2087: Add a null
implementation of endgrent for platforms that don't have it (eg Android).
Loosely based on a patch from Nathan Osman, ok djm
20130517
- (dtucker) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/03/07 00:20:34
[regress/proxy-connect.sh]
repeat test with a style appended to the username
- dtucker@cvs.openbsd.org 2013/03/23 11:09:43
[regress/test-exec.sh]
Only regenerate host keys if they don't exist or if ssh-keygen has changed
since they were. Reduces test runtime by 5-30% depending on machine
speed.
- dtucker@cvs.openbsd.org 2013/04/06 06:00:22
[regress/rekey.sh regress/test-exec.sh regress/integrity.sh
regress/multiplex.sh Makefile regress/cfgmatch.sh]
Split the regress log into 3 parts: the debug output from ssh, the debug
log from sshd and the output from the client command (ssh, scp or sftp).
Somewhat functional now, will become more useful when ssh/sshd -E is added.
- dtucker@cvs.openbsd.org 2013/04/07 02:16:03
[regress/Makefile regress/rekey.sh regress/integrity.sh
regress/sshd-log-wrapper.sh regress/forwarding.sh regress/test-exec.sh]
use -E option for ssh and sshd to write debuging logs to ssh{,d}.log and
save the output from any failing tests. If a test fails the debug output
from ssh and sshd for the failing tests (and only the failing tests) should
be available in failed-ssh{,d}.log.
- djm@cvs.openbsd.org 2013/04/18 02:46:12
[regress/Makefile regress/sftp-chroot.sh]
test sshd ChrootDirectory+internal-sftp; feedback & ok dtucker@
- dtucker@cvs.openbsd.org 2013/04/22 07:23:08
[regress/multiplex.sh]
Write mux master logs to regress.log instead of ssh.log to keep separate
- djm@cvs.openbsd.org 2013/05/10 03:46:14
[regress/modpipe.c]
sync some portability changes from portable OpenSSH (id sync only)
- dtucker@cvs.openbsd.org 2013/05/16 02:10:35
[regress/rekey.sh]
Add test for time-based rekeying
- dtucker@cvs.openbsd.org 2013/05/16 03:33:30
[regress/rekey.sh]
test rekeying when there's no data being transferred
- dtucker@cvs.openbsd.org 2013/05/16 04:26:10
[regress/rekey.sh]
add server-side rekey test
- dtucker@cvs.openbsd.org 2013/05/16 05:48:31
[regress/rekey.sh]
add tests for RekeyLimit parsing
- dtucker@cvs.openbsd.org 2013/05/17 00:37:40
[regress/agent.sh regress/keytype.sh regress/cfgmatch.sh
regress/forcecommand.sh regress/proto-version.sh regress/test-exec.sh
regress/cipher-speed.sh regress/cert-hostkey.sh regress/cert-userkey.sh
regress/ssh-com.sh]
replace 'echo -n' with 'printf' since it's more portable
also remove "echon" hack.
- dtucker@cvs.openbsd.org 2013/05/17 01:16:09
[regress/agent-timeout.sh]
Pull back some portability changes from -portable:
- TIMEOUT is a read-only variable in some shells
- not all greps have -q so redirect to /dev/null instead.
(ID sync only)
- dtucker@cvs.openbsd.org 2013/05/17 01:32:11
[regress/integrity.sh]
don't print output from ssh before getting it (it's available in ssh.log)
- dtucker@cvs.openbsd.org 2013/05/17 04:29:14
[regress/sftp.sh regress/putty-ciphers.sh regress/cipher-speed.sh
regress/test-exec.sh regress/sftp-batch.sh regress/dynamic-forward.sh
regress/putty-transfer.sh regress/conch-ciphers.sh regress/sftp-cmds.sh
regress/scp.sh regress/ssh-com-sftp.sh regress/rekey.sh
regress/putty-kex.sh regress/stderr-data.sh regress/stderr-after-eof.sh
regress/sftp-badcmds.sh regress/reexec.sh regress/ssh-com-client.sh
regress/sftp-chroot.sh regress/forwarding.sh regress/transfer.sh
regress/multiplex.sh]
Move the setting of DATA and COPY into test-exec.sh
- dtucker@cvs.openbsd.org 2013/05/17 10:16:26
[regress/try-ciphers.sh]
use expr for math to keep diffs vs portable down
(id sync only)
- dtucker@cvs.openbsd.org 2013/05/17 10:23:52
[regress/login-timeout.sh regress/reexec.sh regress/test-exec.sh]
Use SUDO when cat'ing pid files and running the sshd log wrapper so that
it works with a restrictive umask and the pid files are not world readable.
Changes from -portable. (id sync only)
- dtucker@cvs.openbsd.org 2013/05/17 10:24:48
[regress/localcommand.sh]
use backticks for portability. (id sync only)
- dtucker@cvs.openbsd.org 2013/05/17 10:26:26
[regress/sftp-badcmds.sh]
remove unused BATCH variable. (id sync only)
- dtucker@cvs.openbsd.org 2013/05/17 10:28:11
[regress/sftp.sh]
only compare copied data if sftp succeeds. from portable (id sync only)
- dtucker@cvs.openbsd.org 2013/05/17 10:30:07
[regress/test-exec.sh]
wait a bit longer for startup and use case for absolute path.
from portable (id sync only)
- dtucker@cvs.openbsd.org 2013/05/17 10:33:09
[regress/agent-getpeereid.sh]
don't redirect stdout from sudo. from portable (id sync only)
- dtucker@cvs.openbsd.org 2013/05/17 10:34:30
[regress/portnum.sh]
use a more portable negated if structure. from portable (id sync only)
- dtucker@cvs.openbsd.org 2013/05/17 10:35:43
[regress/scp.sh]
use a file extention that's not special on some platforms. from portable
(id sync only)
- (dtucker) [regress/bsd.regress.mk] Remove unused file. We've never used it
in portable and it's long gone in openbsd.
- (dtucker) [regress/integrity.sh]. Force fixed Diffie-Hellman key exchange
methods. When the openssl version doesn't support ECDH then next one on
the list is DH group exchange, but that causes a bit more traffic which can
mean that the tests flip bits in the initial exchange rather than the MACed
traffic and we get different errors to what the tests look for.
- (dtucker) [openbsd-compat/getopt.h] Remove unneeded bits.
- (dtucker) [regress/cfgmatch.sh] Resync config file setup with openbsd.
- (dtucker) [regress/agent-getpeereid.sh] Resync spaces with openbsd.
- (dtucker) [regress/integrity.sh regress/krl.sh regress/test-exec.sh]
Move the jot helper function to portable-specific part of test-exec.sh.
- (dtucker) [regress/test-exec.sh] Move the portable-specific functions
together and add a couple of missing lines from openbsd.
- (dtucker) [regress/stderr-after-eof.sh regress/test-exec.sh] Move the md5
helper function to the portable part of test-exec.sh.
- (dtucker) [regress/runtests.sh] Remove obsolete test driver script.
- (dtucker) [regress/cfgmatch.sh] Remove unneeded sleep renderd obsolete by
rev 1.6 which calls wait.
20130516
- (djm) [contrib/ssh-copy-id] Fix bug that could cause "rm *" to be
executed if mktemp failed; bz#2105 ok dtucker@
- (dtucker) OpenBSD CVS Sync
- tedu@cvs.openbsd.org 2013/04/23 17:49:45
[misc.c]
use xasprintf instead of a series of strlcats and strdup. ok djm
- tedu@cvs.openbsd.org 2013/04/24 16:01:46
[misc.c]
remove extra parens noticed by nicm
- dtucker@cvs.openbsd.org 2013/05/06 07:35:12
[sftp-server.8]
Reference the version of the sftp draft we actually implement. ok djm@
- djm@cvs.openbsd.org 2013/05/10 03:40:07
[sshconnect2.c]
fix bzero(ptr_to_struct, sizeof(ptr_to_struct)); bz#2100 from
Colin Watson
- djm@cvs.openbsd.org 2013/05/10 04:08:01
[key.c]
memleak in cert_free(), wasn't actually freeing the struct;
bz#2096 from shm AT digitalsun.pl
- dtucker@cvs.openbsd.org 2013/05/10 10:13:50
[ssh-pkcs11-helper.c]
remove unused extern optarg. ok markus@
- dtucker@cvs.openbsd.org 2013/05/16 02:00:34
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c
ssh_config.5 packet.h]
Add an optional second argument to RekeyLimit in the client to allow
rekeying based on elapsed time in addition to amount of traffic.
with djm@ jmc@, ok djm
- dtucker@cvs.openbsd.org 2013/05/16 04:09:14
[sshd_config.5 servconf.c servconf.h packet.c serverloop.c monitor.c sshd_config
sshd.c] Add RekeyLimit to sshd with the same syntax as the client allowing
rekeying based on traffic volume or time. ok djm@, help & ok jmc@ for the man
page.
- djm@cvs.openbsd.org 2013/05/16 04:27:50
[ssh_config.5 readconf.h readconf.c]
add the ability to ignore specific unrecognised ssh_config options;
bz#866; ok markus@
- jmc@cvs.openbsd.org 2013/05/16 06:28:45
[ssh_config.5]
put IgnoreUnknown in the right place;
- jmc@cvs.openbsd.org 2013/05/16 06:30:06
[sshd_config.5]
oops! avoid Xr to self;
- dtucker@cvs.openbsd.org 2013/05/16 09:08:41
[log.c scp.c sshd.c serverloop.c schnorr.c sftp.c]
Fix some "unused result" warnings found via clang and -portable.
ok markus@
- dtucker@cvs.openbsd.org 2013/05/16 09:12:31
[readconf.c servconf.c]
switch RekeyLimit traffic volume parsing to scan_scaled. ok djm@
- dtucker@cvs.openbsd.org 2013/05/16 10:43:34
[servconf.c readconf.c]
remove now-unused variables
- dtucker@cvs.openbsd.org 2013/05/16 10:44:06
[servconf.c]
remove another now-unused variable
- (dtucker) [configure.ac readconf.c servconf.c
openbsd-compat/openbsd-compat.h] Add compat bits for scan_scaled.
20130510
- (dtucker) [configure.ac] Enable -Wsizeof-pointer-memaccess if the compiler
supports it. Mentioned by Colin Watson in bz#2100, ok djm.
- (dtucker) [openbsd-compat/getopt.c] Factor out portibility changes to
getopt.c. Preprocessed source is identical other than line numbers.
- (dtucker) [openbsd-compat/getopt_long.c] Import from OpenBSD. No
portability changes yet.
- (dtucker) [openbsd-compat/Makefile.in openbsd-compat/getopt.c
openbsd-compat/getopt_long.c regress/modpipe.c] Remove getopt.c, add
portability code to getopt_long.c and switch over Makefile and the ugly
hack in modpipe.c. Fixes bz#1448.
- (dtucker) [openbsd-compat/getopt.h openbsd-compat/getopt_long.c
openbsd-compat/openbsd-compat.h] pull in getopt.h from openbsd and plumb
in to use it when we're using our own getopt.
- (dtucker) [kex.c] Only include sha256 and ECC key exchange methods when the
underlying libraries support them.
- (dtucker) [configure.ac] Add -Werror to the -Qunused-arguments test so
we don't get a warning on compilers that *don't* support it. Add
-Wno-unknown-warning-option. Move both to the start of the list for
maximum noise suppression. Tested with gcc 4.6.3, gcc 2.95.4 and clang 2.9.
20130423
- (djm) [auth.c configure.ac misc.c monitor.c monitor_wrap.c] Support
platforms, such as Android, that lack struct passwd.pw_gecos. Report
and initial patch from Nathan Osman bz#2086; feedback tim@ ok dtucker@
- (djm) OpenBSD CVS Sync
- markus@cvs.openbsd.org 2013/03/05 20:16:09
[sshconnect2.c]
reset pubkey order on partial success; ok djm@
- djm@cvs.openbsd.org 2013/03/06 23:35:23
[session.c]
fatal() when ChrootDirectory specified by running without root privileges;
ok markus@
- djm@cvs.openbsd.org 2013/03/06 23:36:53
[readconf.c]
g/c unused variable (-Wunused)
- djm@cvs.openbsd.org 2013/03/07 00:19:59
[auth2-pubkey.c monitor.c]
reconstruct the original username that was sent by the client, which may
have included a style (e.g. "root:skey") when checking public key
signatures. Fixes public key and hostbased auth when the client specified
a style; ok markus@
- markus@cvs.openbsd.org 2013/03/07 19:27:25
[auth.h auth2-chall.c auth2.c monitor.c sshd_config.5]
add submethod support to AuthenticationMethods; ok and freedback djm@
- djm@cvs.openbsd.org 2013/03/08 06:32:58
[ssh.c]
allow "ssh -f none ..." ok markus@
- djm@cvs.openbsd.org 2013/04/05 00:14:00
[auth2-gss.c krl.c sshconnect2.c]
hush some {unused, printf type} warnings
- djm@cvs.openbsd.org 2013/04/05 00:31:49
[pathnames.h]
use the existing _PATH_SSH_USER_RC define to construct the other
pathnames; bz#2077, ok dtucker@ (no binary change)
- djm@cvs.openbsd.org 2013/04/05 00:58:51
[mux.c]
cleanup mux-created channels that are in SSH_CHANNEL_OPENING state too
(in addition to ones already in OPEN); bz#2079, ok dtucker@
- markus@cvs.openbsd.org 2013/04/06 16:07:00
[channels.c sshd.c]
handle ECONNABORTED for accept(); ok deraadt some time ago...
- dtucker@cvs.openbsd.org 2013/04/07 02:10:33
[log.c log.h ssh.1 ssh.c sshd.8 sshd.c]
Add -E option to ssh and sshd to append debugging logs to a specified file
instead of stderr or syslog. ok markus@, man page help jmc@
- dtucker@cvs.openbsd.org 2013/04/07 09:40:27
[sshd.8]
clarify -e text. suggested by & ok jmc@
- djm@cvs.openbsd.org 2013/04/11 02:27:50
[packet.c]
quiet disconnect notifications on the server from error() back to logit()
if it is a normal client closure; bz#2057 ok+feedback dtucker@
- dtucker@cvs.openbsd.org 2013/04/17 09:04:09
[session.c]
revert rev 1.262; it fails because uid is already set here. ok djm@
- djm@cvs.openbsd.org 2013/04/18 02:16:07
[sftp.c]
make "sftp -q" do what it says on the sticker: hush everything but errors;
ok dtucker@
- djm@cvs.openbsd.org 2013/04/19 01:00:10
[sshd_config.5]
document the requirment that the AuthorizedKeysCommand be owned by root;
ok dtucker@ markus@
- djm@cvs.openbsd.org 2013/04/19 01:01:00
[ssh-keygen.c]
fix some memory leaks; bz#2088 ok dtucker@
- djm@cvs.openbsd.org 2013/04/19 01:03:01
[session.c]
reintroduce 1.262 without the connection-killing bug:
fatal() when ChrootDirectory specified by running without root privileges;
ok markus@
- djm@cvs.openbsd.org 2013/04/19 01:06:50
[authfile.c cipher.c cipher.h kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c]
[key.c key.h mac.c mac.h packet.c ssh.1 ssh.c]
add the ability to query supported ciphers, MACs, key type and KEX
algorithms to ssh. Includes some refactoring of KEX and key type handling
to be table-driven; ok markus@
- djm@cvs.openbsd.org 2013/04/19 11:10:18
[ssh.c]
add -Q to usage; reminded by jmc@
- djm@cvs.openbsd.org 2013/04/19 12:07:08
[kex.c]
remove duplicated list entry pointed out by naddy@
- dtucker@cvs.openbsd.org 2013/04/22 01:17:18
[mux.c]
typo in debug output: evitval->exitval
20130418
- (djm) [config.guess config.sub] Update to last versions before they switch
to GPL3. ok dtucker@
- (dtucker) [configure.ac] Use -Qunused-arguments to suppress warnings from
unused argument warnings (in particular, -fno-builtin-memset) from clang.
20130404
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2013/02/17 23:16:57
[readconf.c ssh.c readconf.h sshconnect2.c]
Keep track of which IndentityFile options were manually supplied and which
were default options, and don't warn if the latter are missing.
ok markus@
- dtucker@cvs.openbsd.org 2013/02/19 02:12:47
[krl.c]
Remove bogus include. ok djm
- dtucker@cvs.openbsd.org 2013/02/22 04:45:09
[ssh.c readconf.c readconf.h]
Don't complain if IdentityFiles specified in system-wide configs are
missing. ok djm, deraadt.
- markus@cvs.openbsd.org 2013/02/22 19:13:56
[sshconnect.c]
support ProxyCommand=- (stdin/out already point to the proxy); ok djm@
- djm@cvs.openbsd.org 2013/02/22 22:09:01
[ssh.c]
Allow IdenityFile=none; ok markus deraadt (and dtucker for an earlier
version)
20130401
- (dtucker) [openbsd-compat/bsd-cygwin_util.{c,h}] Don't include windows.h
to avoid conflicting definitions of __int64, adding the required bits.
Patch from Corinna Vinschen.
20130323
- (tim) [Makefile.in] remove some duplication introduced in 20130220 commit.
20130322
- (djm) [contrib/ssh-copy-id contrib/ssh-copy-id.1] Updated to Phil
Hands' greatly revised version.
- (djm) Release 6.2p1
- (dtucker) [configure.ac] Add stdlib.h to zlib check for exit() prototype.
- (dtucker) [includes.h] Check if _GNU_SOURCE is already defined before
defining it again. Prevents warnings if someone, eg, sets it in CFLAGS.
20130318
- (djm) [configure.ac log.c scp.c sshconnect2.c openbsd-compat/vis.c]
[openbsd-compat/vis.h] FreeBSD's strnvis isn't compatible with OpenBSD's
so mark it as broken. Patch from des AT des.no
20130317
- (tim) [configure.ac] OpenServer 5 wants lastlog even though it has none
of the bits the configure test looks for.
20130316
- (djm) [configure.ac] Disable utmp, wtmp and/or lastlog if the platform
is unable to successfully compile them. Based on patch from des AT
des.no
- (djm) [configure.ac openbsd-compat/bsd-misc.c openbsd-compat/bsd-misc.h]
Add a usleep replacement for platforms that lack it; ok dtucker
- (djm) [session.c] FreeBSD needs setusercontext(..., LOGIN_SETUMASK) to
occur after UID switch; patch from John Marshall via des AT des.no;
ok dtucker@
20130312
- (dtucker) [regress/Makefile regress/cipher-speed.sh regress/test-exec.sh]
Improve portability of cipher-speed test, based mostly on a patch from
Iain Morgan.
- (dtucker) [auth.c configure.ac platform.c platform.h] Accept uid 2 ("bin")
in addition to root as an owner of system directories on AIX and HP-UX.
ok djm@
20130307
- (dtucker) [INSTALL] Bump documented autoconf version to what we're
currently using.
- (dtucker) [defines.h] Remove SIZEOF_CHAR bits since the test for it
was removed in configure.ac rev 1.481 as it was redundant.
- (tim) [Makefile.in] Add another missing $(EXEEXT) I should have seen 3 days
ago.
- (djm) [configure.ac] Add a timeout to the select/rlimit test to give it a
chance to complete on broken systems; ok dtucker@
20130306
- (dtucker) [regress/forward-control.sh] Wait longer for the forwarding
connection to start so that the test works on slower machines.
- (dtucker) [configure.ac] test that we can set number of file descriptors
to zero with setrlimit before enabling the rlimit sandbox. This affects
(at least) HPUX 11.11.
20130305
- (djm) [regress/modpipe.c] Compilation fix for AIX and parsing fix for
HP/UX. Spotted by Kevin Brott
- (dtucker) [configure.ac] use "=" for shell test and not "==". Spotted by
Amit Kulkarni and Kevin Brott.
- (dtucker) [Makefile.in] Remove trailing "\" on PATHS, which caused obscure
build breakage on (at least) HP-UX 11.11. Found by Amit Kulkarni and Kevin
Brott.
- (tim) [Makefile.in] Add missing $(EXEEXT). Found by Roumen Petrov.
20130227
- (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
[contrib/suse/openssh.spec] Crank version numbers
- (tim) [regress/forward-control.sh] use sh in case login shell is csh.
- (tim) [regress/integrity.sh] shell portability fix.
- (tim) [regress/integrity.sh] keep old solaris awk from hanging.
- (tim) [regress/krl.sh] keep old solaris awk from hanging.
20130226
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/02/20 08:27:50
[integrity.sh]
Add an option to modpipe that warns if the modification offset it not
reached in it's stream and turn it on for t-integrity. This should catch
cases where the session is not fuzzed for being too short (cf. my last
"oops" commit)
- (djm) [regress/integrity.sh] Run sshd via $SUDO; fixes tinderbox breakage
for UsePAM=yes configuration
20130225
- (dtucker) [configure.ac ssh-gss.h] bz#2073: additional #includes needed
to use Solaris native GSS libs. Patch from Pierre Ossman.
20130223
- (djm) [configure.ac includes.h loginrec.c mux.c sftp.c] Prefer
bsd/libutil.h to libutil.h to avoid deprecation warnings on Ubuntu.
ok tim
20130222
- (dtucker) [Makefile.in configure.ac] bz#2072: don't link krb5 libs to
ssh(1) since they're not needed. Patch from Pierre Ossman, ok djm.
- (dtucker) [configure.ac] bz#2073: look for Solaris' differently-named
libgss too. Patch from Pierre Ossman, ok djm.
- (djm) [configure.ac sandbox-seccomp-filter.c] Support for Linux
seccomp-bpf sandbox on ARM. Patch from shawnlandden AT gmail.com;
ok dtucker
20130221
- (tim) [regress/forward-control.sh] shell portability fix.
20130220
- (tim) [regress/cipher-speed.sh regress/try-ciphers.sh] shell portability fix.
- (tim) [krl.c Makefile.in regress/Makefile regress/modpipe.c] remove unneeded
err.h include from krl.c. Additional portability fixes for modpipe. OK djm
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/02/20 08:27:50
[regress/integrity.sh regress/modpipe.c]
Add an option to modpipe that warns if the modification offset it not
reached in it's stream and turn it on for t-integrity. This should catch
cases where the session is not fuzzed for being too short (cf. my last
"oops" commit)
- djm@cvs.openbsd.org 2013/02/20 08:29:27
[regress/modpipe.c]
s/Id/OpenBSD/ in RCS tag
20130219
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/02/18 22:26:47
[integrity.sh]
crank the offset yet again; it was still fuzzing KEX one of Darren's
portable test hosts at 2800
- djm@cvs.openbsd.org 2013/02/19 02:14:09
[integrity.sh]
oops, forgot to increase the output of the ssh command to ensure that
we actually reach $offset
- (djm) [regress/integrity.sh] Skip SHA2-based MACs on configurations that
lack support for SHA2.
- (djm) [regress/modpipe.c] Add local err, and errx functions for platforms
that do not have them.
20130217
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/02/17 23:16:55
[integrity.sh]
make the ssh command generates some output to ensure that there are at
least offset+tries bytes in the stream.
20130216
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/02/16 06:08:45
[integrity.sh]
make sure the fuzz offset is actually past the end of KEX for all KEX
types. diffie-hellman-group-exchange-sha256 requires an offset around
2700. Noticed via test failures in portable OpenSSH on platforms that
lack ECC and this the more byte-frugal ECDH KEX algorithms.
20130215
- (djm) [contrib/suse/rc.sshd] Use SSHD_BIN consistently; bz#2056 from
Iain Morgan
- (dtucker) [configure.ac openbsd-compat/bsd-misc.c openbsd-compat/bsd-misc.h]
Use getpgrp() if we don't have getpgid() (old BSDs, maybe others).
- (dtucker) [configure.ac openbsd-compat/Makefile.in openbsd-compat/strtoull.c
openbsd-compat/openbsd-compat.h] Add strtoull to compat library for
platforms that don't have it.
- (dtucker) [openbsd-compat/openbsd-compat.h] Add prototype for strtoul,
group strto* function prototypes together.
- (dtucker) [openbsd-compat/bsd-misc.c] Handle the case where setpgrp() takes
an argument. Pointed out by djm.
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/02/14 21:35:59
[auth2-pubkey.c]
Correct error message that had a typo and was logging the wrong thing;
patch from Petr Lautrbach
- dtucker@cvs.openbsd.org 2013/02/15 00:21:01
[sshconnect2.c]
Warn more loudly if an IdentityFile provided by the user cannot be read.
bz #1981, ok djm@
20130214
- (djm) [regress/krl.sh] Don't use ecdsa keys in environment that lack ECC.
- (djm) [regress/krl.sh] typo; found by Iain Morgan
- (djm) [regress/integrity.sh] Start fuzzing from offset 2500 (instead
of 2300) to avoid clobbering the end of (non-MAC'd) KEX. Verified by
Iain Morgan
20130212
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/01/24 21:45:37
[krl.c]
fix handling of (unused) KRL signatures; skip string in correct buffer
- djm@cvs.openbsd.org 2013/01/24 22:08:56
[krl.c]
skip serial lookup when cert's serial number is zero
- krw@cvs.openbsd.org 2013/01/25 05:00:27
[krl.c]
Revert last. Breaks due to likely typo. Let djm@ fix later.
ok djm@ via dlg@
- djm@cvs.openbsd.org 2013/01/25 10:22:19
[krl.c]
redo last commit without the vi-vomit that snuck in:
skip serial lookup when cert's serial number is zero
(now with 100% better comment)
- djm@cvs.openbsd.org 2013/01/26 06:11:05
[Makefile.in acss.c acss.h cipher-acss.c cipher.c]
[openbsd-compat/openssl-compat.h]
remove ACSS, now that it is gone from libcrypto too
- djm@cvs.openbsd.org 2013/01/27 10:06:12
[krl.c]
actually use the xrealloc() return value; spotted by xi.wang AT gmail.com
- dtucker@cvs.openbsd.org 2013/02/06 00:20:42
[servconf.c sshd_config sshd_config.5]
Change default of MaxStartups to 10:30:100 to start doing random early
drop at 10 connections up to 100 connections. This will make it harder
to DoS as CPUs have come a long way since the original value was set
back in 2000. Prompted by nion at debian org, ok markus@
- dtucker@cvs.openbsd.org 2013/02/06 00:22:21
[auth.c]
Fix comment, from jfree.e1 at gmail
- djm@cvs.openbsd.org 2013/02/08 00:41:12
[sftp.c]
fix NULL deref when built without libedit and control characters
entered as command; debugging and patch from Iain Morgan an
Loganaden Velvindron in bz#1956
- markus@cvs.openbsd.org 2013/02/10 21:19:34
[version.h]
openssh 6.2
- djm@cvs.openbsd.org 2013/02/10 23:32:10
[ssh-keygen.c]
append to moduli file when screening candidates rather than overwriting.
allows resumption of interrupted screen; patch from Christophe Garault
in bz#1957; ok dtucker@
- djm@cvs.openbsd.org 2013/02/10 23:35:24
[packet.c]
record "Received disconnect" messages at ERROR rather than INFO priority,
since they are abnormal and result in a non-zero ssh exit status; patch
from Iain Morgan in bz#2057; ok dtucker@
- dtucker@cvs.openbsd.org 2013/02/11 21:21:58
[sshd.c]
Add openssl version to debug output similar to the client. ok markus@
- djm@cvs.openbsd.org 2013/02/11 23:58:51
[regress/try-ciphers.sh]
remove acss here too
- (djm) [regress/try-ciphers.sh] clean up CVS merge botch
20130211
- (djm) [configure.ac openbsd-compat/openssl-compat.h] Repair build on old
libcrypto that lacks EVP_CIPHER_CTX_ctrl
20130208
- (djm) [contrib/redhat/sshd.init] treat RETVAL as an integer;
patch from Iain Morgan in bz#2059
- (dtucker) [configure.ac openbsd-compat/sys-tree.h] Test if compiler allows
__attribute__ on return values and work around if necessary. ok djm@
20130207
- (djm) [configure.ac] Don't probe seccomp capability of running kernel
at configure time; the seccomp sandbox will fall back to rlimit at
runtime anyway. Patch from plautrba AT redhat.com in bz#2011
20130120
- (djm) [cipher-aes.c cipher-ctr.c openbsd-compat/openssl-compat.h]
Move prototypes for replacement ciphers to openssl-compat.h; fix EVP
prototypes for openssl-1.0.0-fips.
- (djm) OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2013/01/18 07:57:47
[ssh-keygen.1]
tweak previous;
- jmc@cvs.openbsd.org 2013/01/18 07:59:46
[ssh-keygen.c]
-u before -V in usage();
- jmc@cvs.openbsd.org 2013/01/18 08:00:49
[sshd_config.5]
tweak previous;
- jmc@cvs.openbsd.org 2013/01/18 08:39:04
[ssh-keygen.1]
add -Q to the options list; ok djm
- jmc@cvs.openbsd.org 2013/01/18 21:48:43
[ssh-keygen.1]
command-line (adj.) -> command line (n.);
- jmc@cvs.openbsd.org 2013/01/19 07:13:25
[ssh-keygen.1]
fix some formatting; ok djm
- markus@cvs.openbsd.org 2013/01/19 12:34:55
[krl.c]
RB_INSERT does not remove existing elments; ok djm@
- (djm) [openbsd-compat/sys-tree.h] Sync with OpenBSD. krl.c needs newer
version.
- (djm) [regress/krl.sh] replacement for jot; most platforms lack it
20130118
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/01/17 23:00:01
[auth.c key.c key.h ssh-keygen.1 ssh-keygen.c sshd_config.5]
[krl.c krl.h PROTOCOL.krl]
add support for Key Revocation Lists (KRLs). These are a compact way to
represent lists of revoked keys and certificates, taking as little as
a single bit of incremental cost to revoke a certificate by serial number.
KRLs are loaded via the existing RevokedKeys sshd_config option.
feedback and ok markus@
- djm@cvs.openbsd.org 2013/01/18 00:45:29
[regress/Makefile regress/cert-userkey.sh regress/krl.sh]
Tests for Key Revocation Lists (KRLs)
- djm@cvs.openbsd.org 2013/01/18 03:00:32
[krl.c]
fix KRL generation bug for list sections
20130117
- (djm) [regress/cipher-speed.sh regress/integrity.sh regress/try-ciphers.sh]
check for GCM support before testing GCM ciphers.
20130112
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2013/01/12 11:22:04
[cipher.c]
improve error message for integrity failure in AES-GCM modes; ok markus@
- djm@cvs.openbsd.org 2013/01/12 11:23:53
[regress/cipher-speed.sh regress/integrity.sh regress/try-ciphers.sh]
test AES-GCM modes; feedback markus@
- (djm) [regress/integrity.sh] repair botched merge
20130109
- (djm) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2012/12/14 05:26:43
[auth.c]
use correct string in error message; from rustybsd at gmx.fr
- djm@cvs.openbsd.org 2013/01/02 00:32:07
[clientloop.c mux.c]
channel_setup_local_fwd_listener() returns 0 on failure, not -ve
bz#2055 reported by mathieu.lacage AT gmail.com
- djm@cvs.openbsd.org 2013/01/02 00:33:49
[PROTOCOL.agent]
correct format description for SSH_AGENTC_ADD_RSA_ID_CONSTRAINED
bz#2051 from david AT lechnology.com
- djm@cvs.openbsd.org 2013/01/03 05:49:36
[servconf.h]
add a couple of ServerOptions members that should be copied to the privsep
child (for consistency, in this case they happen only to be accessed in
the monitor); ok dtucker@
- djm@cvs.openbsd.org 2013/01/03 12:49:01
[PROTOCOL]
fix description of MAC calculation for EtM modes; ok markus@
- djm@cvs.openbsd.org 2013/01/03 12:54:49
[sftp-server.8 sftp-server.c]
allow specification of an alternate start directory for sftp-server(8)
"I like this" markus@
- djm@cvs.openbsd.org 2013/01/03 23:22:58
[ssh-keygen.c]
allow fingerprinting of keys hosted in PKCS#11 tokens: ssh-keygen -lD ...
ok markus@
- jmc@cvs.openbsd.org 2013/01/04 19:26:38
[sftp-server.8 sftp-server.c]
sftp-server.8: add argument name to -d
sftp-server.c: add -d to usage()
ok djm
- markus@cvs.openbsd.org 2013/01/08 18:49:04
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c]
[myproposal.h packet.c ssh_config.5 sshd_config.5]
support AES-GCM as defined in RFC 5647 (but with simpler KEX handling)
ok and feedback djm@
- djm@cvs.openbsd.org 2013/01/09 05:40:17
[ssh-keygen.c]
correctly initialise fingerprint type for fingerprinting PKCS#11 keys
- (djm) [cipher.c configure.ac openbsd-compat/openssl-compat.h]
Fix merge botch, automatically detect AES-GCM in OpenSSL, move a little
cipher compat code to openssl-compat.h
20121217
- (dtucker) [Makefile.in] Add some scaffolding so that the new regress
tests will work with VPATH directories.
20121213
- (djm) OpenBSD CVS Sync
- markus@cvs.openbsd.org 2012/12/12 16:45:52
[packet.c]
reset incoming_packet buffer for each new packet in EtM-case, too;
this happens if packets are parsed only parially (e.g. ignore
messages sent when su/sudo turn off echo); noted by sthen/millert
- naddy@cvs.openbsd.org 2012/12/12 16:46:10
[cipher.c]
use OpenSSL's EVP_aes_{128,192,256}_ctr() API and remove our hand-rolled
counter mode code; ok djm@
- (djm) [configure.ac cipher-ctr.c] Adapt EVP AES CTR change to retain our
compat code for older OpenSSL
- (djm) [cipher.c] Fix missing prototype for compat code
20121212
- (djm) OpenBSD CVS Sync
- markus@cvs.openbsd.org 2012/12/11 22:16:21
[monitor.c]
drain the log messages after receiving the keystate from the unpriv
child. otherwise it might block while sending. ok djm@
- markus@cvs.openbsd.org 2012/12/11 22:31:18
[PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h]
[packet.c ssh_config.5 sshd_config.5]
add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms
that change the packet format and compute the MAC over the encrypted
message (including the packet size) instead of the plaintext data;
these EtM modes are considered more secure and used by default.
feedback and ok djm@
- sthen@cvs.openbsd.org 2012/12/11 22:51:45
[mac.c]
fix typo, s/tem/etm in hmac-ripemd160-tem. ok markus@
- markus@cvs.openbsd.org 2012/12/11 22:32:56
[regress/try-ciphers.sh]
add etm modes
- markus@cvs.openbsd.org 2012/12/11 22:42:11
[regress/Makefile regress/modpipe.c regress/integrity.sh]
test the integrity of the packets; with djm@
- markus@cvs.openbsd.org 2012/12/11 23:12:13
[try-ciphers.sh]
add hmac-ripemd160-etm@openssh.com
- (djm) [mac.c] fix merge botch
- (djm) [regress/Makefile regress/integrity.sh] Make the integrity.sh test
work on platforms without 'jot'
- (djm) [regress/integrity.sh] Fix awk quoting, packet length skip
- (djm) [regress/Makefile] fix t-exec rule
20121207
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2012/12/06 06:06:54
[regress/keys-command.sh]
Fix some problems with the keys-command test:
- use string comparison rather than numeric comparison
- check for existing KEY_COMMAND file and don't clobber if it exists
- clean up KEY_COMMAND file if we do create it.
- check that KEY_COMMAND is executable (which it won't be if eg /var/run
is mounted noexec).
ok djm.
- jmc@cvs.openbsd.org 2012/12/03 08:33:03
[ssh-add.1 sshd_config.5]
tweak previous;
- markus@cvs.openbsd.org 2012/12/05 15:42:52
[ssh-add.c]
prevent double-free of comment; ok djm@
- dtucker@cvs.openbsd.org 2012/12/07 01:51:35
[serverloop.c]
Cast signal to int for logging. A no-op on openbsd (they're always ints)
but will prevent warnings in portable. ok djm@
20121205
- (tim) [defines.h] Some platforms are missing ULLONG_MAX. Feedback djm@.
20121203
- (djm) [openbsd-compat/sys-queue.h] Sync with OpenBSD to get
TAILQ_FOREACH_SAFE needed for upcoming changes.
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2012/12/02 20:26:11
[ssh_config.5 sshconnect2.c]
Make IdentitiesOnly apply to keys obtained from a PKCS11Provider.
This allows control of which keys are offered from tokens using
IdentityFile. ok markus@
- djm@cvs.openbsd.org 2012/12/02 20:42:15
[ssh-add.1 ssh-add.c]
make deleting explicit keys "ssh-add -d" symmetric with adding keys -
try to delete the corresponding certificate too and respect the -k option
to allow deleting of the key only; feedback and ok markus@
- djm@cvs.openbsd.org 2012/12/02 20:46:11
[auth-options.c channels.c servconf.c servconf.h serverloop.c session.c]
[sshd_config.5]
make AllowTcpForwarding accept "local" and "remote" in addition to its
current "yes"/"no" to allow the server to specify whether just local or
remote TCP forwarding is enabled. ok markus@
- dtucker@cvs.openbsd.org 2012/10/05 02:20:48
[regress/cipher-speed.sh regress/try-ciphers.sh]
Add umac-128@openssh.com to the list of MACs to be tested
- djm@cvs.openbsd.org 2012/10/19 05:10:42
[regress/cert-userkey.sh]
include a serial number when generating certs
- djm@cvs.openbsd.org 2012/11/22 22:49:30
[regress/Makefile regress/keys-command.sh]
regress for AuthorizedKeysCommand; hints from markus@
- djm@cvs.openbsd.org 2012/12/02 20:47:48
[Makefile regress/forward-control.sh]
regress for AllowTcpForwarding local/remote; ok markus@
- djm@cvs.openbsd.org 2012/12/03 00:14:06
[auth2-chall.c ssh-keygen.c]
Fix compilation with -Wall -Werror (trivial type fixes)
- (djm) [configure.ac] Turn on -g for gcc compilers. Helps pre-installation
debugging. ok dtucker@
- (djm) [configure.ac] Revert previous. configure.ac already does this
for us.
20121114
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2012/11/14 02:24:27
[auth2-pubkey.c]
fix username passed to helper program
prepare stdio fds before closefrom()
spotted by landry@
- djm@cvs.openbsd.org 2012/11/14 02:32:15
[ssh-keygen.c]
allow the full range of unsigned serial numbers; 'fine' deraadt@
- djm@cvs.openbsd.org 2012/12/02 20:34:10
[auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c]
[monitor.c monitor.h]
Fixes logging of partial authentication when privsep is enabled
Previously, we recorded "Failed xxx" since we reset authenticated before
calling auth_log() in auth2.c. This adds an explcit "Partial" state.
Add a "submethod" to auth_log() to report which submethod is used
for keyboard-interactive.
Fix multiple authentication when one of the methods is
keyboard-interactive.
ok markus@
- dtucker@cvs.openbsd.org 2012/10/05 02:05:30
[regress/multiplex.sh]
Use 'kill -0' to test for the presence of a pid since it's more portable
20121107
- (djm) OpenBSD CVS Sync
- eric@cvs.openbsd.org 2011/11/28 08:46:27
[moduli.5]
fix formula
ok djm@
- jmc@cvs.openbsd.org 2012/09/26 17:34:38
[moduli.5]
last stage of rfc changes, using consistent Rs/Re blocks, and moving the
references into a STANDARDS section;
20121105
- (dtucker) [uidswap.c openbsd-compat/Makefile.in
openbsd-compat/bsd-setres_id.c openbsd-compat/bsd-setres_id.h
openbsd-compat/openbsd-compat.h] Move the fallback code for setting uids
and gids from uidswap.c to the compat library, which allows it to work with
the new setresuid calls in auth2-pubkey. with tim@, ok djm@
- (dtucker) [auth2-pubkey.c] wrap paths.h in an ifdef for platforms that
don't have it. Spotted by tim@.
20121104
- (djm) OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2012/10/31 08:04:50
[sshd_config.5]
tweak previous;
- djm@cvs.openbsd.org 2012/11/04 10:38:43
[auth2-pubkey.c sshd.c sshd_config.5]
Remove default of AuthorizedCommandUser. Administrators are now expected
to explicitly specify a user. feedback and ok markus@
- djm@cvs.openbsd.org 2012/11/04 11:09:15
[auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c]
[sshd_config.5]
Support multiple required authentication via an AuthenticationMethods
option. This option lists one or more comma-separated lists of
authentication method names. Successful completion of all the methods in
any list is required for authentication to complete;
feedback and ok markus@
20121030
- (djm) OpenBSD CVS Sync
- markus@cvs.openbsd.org 2012/10/05 12:34:39
[sftp.c]
fix signed vs unsigned warning; feedback & ok: djm@
- djm@cvs.openbsd.org 2012/10/30 21:29:55
[auth-rsa.c auth.c auth.h auth2-pubkey.c servconf.c servconf.h]
[sshd.c sshd_config sshd_config.5]
new sshd_config option AuthorizedKeysCommand to support fetching
authorized_keys from a command in addition to (or instead of) from
the filesystem. The command is run as the target server user unless
another specified via a new AuthorizedKeysCommandUser option.
patch originally by jchadima AT redhat.com, reworked by me; feedback
and ok markus@
20121019
- (tim) [buildpkg.sh.in] Double up on some backslashes so they end up in
the generated file as intended.
20121005
- (dtucker) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2012/09/17 09:54:44
[sftp.c]
an XXX for later
- markus@cvs.openbsd.org 2012/09/17 13:04:11
[packet.c]
clear old keys on rekeing; ok djm
- dtucker@cvs.openbsd.org 2012/09/18 10:36:12
[sftp.c]
Add bounds check on sftp tab-completion. Part of a patch from from
Jean-Marc Robert via tech@, ok djm
- dtucker@cvs.openbsd.org 2012/09/21 10:53:07
[sftp.c]
Fix improper handling of absolute paths when PWD is part of the completed
path. Patch from Jean-Marc Robert via tech@, ok djm.
- dtucker@cvs.openbsd.org 2012/09/21 10:55:04
[sftp.c]
Fix handling of filenames containing escaped globbing characters and
escape "#" and "*". Patch from Jean-Marc Robert via tech@, ok djm.
- jmc@cvs.openbsd.org 2012/09/26 16:12:13
[ssh.1]
last stage of rfc changes, using consistent Rs/Re blocks, and moving the
references into a STANDARDS section;
- naddy@cvs.openbsd.org 2012/10/01 13:59:51
[monitor_wrap.c]
pasto; ok djm@
- djm@cvs.openbsd.org 2012/10/02 07:07:45
[ssh-keygen.c]
fix -z option, broken in revision 1.215
- markus@cvs.openbsd.org 2012/10/04 13:21:50
[myproposal.h ssh_config.5 umac.h sshd_config.5 ssh.1 sshd.8 mac.c]
add umac128 variant; ok djm@ at n2k12
- dtucker@cvs.openbsd.org 2012/09/06 04:11:07
[regress/try-ciphers.sh]
Restore missing space. (Id sync only).
- dtucker@cvs.openbsd.org 2012/09/09 11:51:25
[regress/multiplex.sh]
Add test for ssh -Ostop
- dtucker@cvs.openbsd.org 2012/09/10 00:49:21
[regress/multiplex.sh]
Log -O cmd output to the log file and make logging consistent with the
other tests. Test clean shutdown of an existing channel when testing
"stop".
- dtucker@cvs.openbsd.org 2012/09/10 01:51:19
[regress/multiplex.sh]
use -Ocheck and waiting for completions by PID to make multiplexing test
less racy and (hopefully) more reliable on slow hardware.
- [Makefile umac.c] Add special-case target to build umac128.o.
- [umac.c] Enforce allowed umac output sizes. From djm@.
- [Makefile.in] "Using $< in a non-suffix rule context is a GNUmake idiom".
20120917
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2012/09/13 23:37:36
[servconf.c]
Fix comment line length
- markus@cvs.openbsd.org 2012/09/14 16:51:34
[sshconnect.c]
remove unused variable
20120907
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2012/09/06 09:50:13
[clientloop.c]
Make the escape command help (~?) context sensitive so that only commands
that will work in the current session are shown. ok markus@
- jmc@cvs.openbsd.org 2012/09/06 13:57:42
[ssh.1]
missing letter in previous;
- dtucker@cvs.openbsd.org 2012/09/07 00:30:19
[clientloop.c]
Print '^Z' instead of a raw ^Z when the sequence is not supported. ok djm@
- dtucker@cvs.openbsd.org 2012/09/07 01:10:21
[clientloop.c]
Merge escape help text for ~v and ~V; ok djm@
- dtucker@cvs.openbsd.org 2012/09/07 06:34:21
[clientloop.c]
when muxmaster is run with -N, make it shut down gracefully when a client
sends it "-O stop" rather than hanging around (bz#1985). ok djm@
20120906
- (dtucker) OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2012/08/15 18:25:50
[ssh-keygen.1]
a little more info on certificate validity;
requested by Ross L Richardson, and provided by djm
- dtucker@cvs.openbsd.org 2012/08/17 00:45:45
[clientloop.c clientloop.h mux.c]
Force a clean shutdown of ControlMaster client sessions when the ~. escape
sequence is used. This means that ~. should now work in mux clients even
if the server is no longer responding. Found by tedu, ok djm.
- djm@cvs.openbsd.org 2012/08/17 01:22:56
[kex.c]
add some comments about better handling first-KEX-follows notifications
from the server. Nothing uses these right now. No binary change
- djm@cvs.openbsd.org 2012/08/17 01:25:58
[ssh-keygen.c]
print details of which host lines were deleted when using
"ssh-keygen -R host"; ok markus@
- djm@cvs.openbsd.org 2012/08/17 01:30:00
[compat.c sshconnect.c]
Send client banner immediately, rather than waiting for the server to
move first for SSH protocol 2 connections (the default). Patch based on
one in bz#1999 by tls AT panix.com, feedback dtucker@ ok markus@
- dtucker@cvs.openbsd.org 2012/09/06 04:37:39
[clientloop.c log.c ssh.1 log.h]
Add ~v and ~V escape sequences to raise and lower the logging level
respectively. Man page help from jmc, ok deraadt jmc
20120830
- (dtucker) [moduli] Import new moduli file.
20120828
- (djm) Release openssh-6.1
20120828
- (dtucker) [openbsd-compat/bsd-cygwin_util.h] define WIN32_LEAN_AND_MEAN
for compatibility with future mingw-w64 headers. Patch from vinschen at
redhat com.
20120822
- (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
[contrib/suse/openssh.spec] Update version numbers
20120731
- (djm) OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2012/07/06 06:38:03
[ssh-keygen.c]
missing full stop in usage();
- djm@cvs.openbsd.org 2012/07/10 02:19:15
[servconf.c servconf.h sshd.c sshd_config]
Turn on systrace sandboxing of pre-auth sshd by default for new installs
by shipping a config that overrides the current UsePrivilegeSeparation=yes
default. Make it easier to flip the default in the future by adding too.
prodded markus@ feedback dtucker@ "get it in" deraadt@
- dtucker@cvs.openbsd.org 2012/07/13 01:35:21
[servconf.c]
handle long comments in config files better. bz#2025, ok markus
- markus@cvs.openbsd.org 2012/07/22 18:19:21
[version.h]
openssh 6.1
20120720
- (dtucker) Import regened moduli file.
20120706
- (djm) [sandbox-seccomp-filter.c] fallback to rlimit if seccomp filter is
not available. Allows use of sshd compiled on host with a filter-capable
kernel on hosts that lack the support. bz#2011 ok dtucker@
- (djm) [configure.ac] Recursively expand $(bindir) to ensure it has no
unexpanded $(prefix) embedded. bz#2007 patch from nix-corp AT
esperi.org.uk; ok dtucker@
- (djm) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2012/07/06 00:41:59
[moduli.c ssh-keygen.1 ssh-keygen.c]
Add options to specify starting line number and number of lines to process
when screening moduli candidates. This allows processing of different
parts of a candidate moduli file in parallel. man page help jmc@, ok djm@
- djm@cvs.openbsd.org 2012/07/06 01:37:21
[mux.c]
fix memory leak of passed-in environment variables and connection
context when new session message is malformed; bz#2003 from Bert.Wesarg
AT googlemail.com
- djm@cvs.openbsd.org 2012/07/06 01:47:38
[ssh.c]
move setting of tty_flag to after config parsing so RequestTTY options
are correctly picked up. bz#1995 patch from przemoc AT gmail.com;
ok dtucker@
20120704
- (dtucker) [configure.ac openbsd-compat/bsd-misc.h] Add setlinebuf for
platforms that don't have it. "looks good" tim@
20120703
- (dtucker) [configure.ac] Detect platforms that can't use select(2) with
setrlimit(RLIMIT_NOFILE, rl_zero) and disable the rlimit sandbox on those.
- (dtucker) [configure.ac sandbox-rlimit.c] Test whether or not
setrlimit(RLIMIT_FSIZE, rl_zero) and skip it if it's not supported. Its
benefit is minor, so it's not worth disabling the sandbox if it doesn't
work.
20120702
- (dtucker) OpenBSD CVS Sync
- naddy@cvs.openbsd.org 2012/06/29 13:57:25
[ssh_config.5 sshd_config.5]
match the documented MAC order of preference to the actual one;
ok dtucker@
- markus@cvs.openbsd.org 2012/06/30 14:35:09
[sandbox-systrace.c sshd.c]
fix a during the load of the sandbox policies (child can still make
the read-syscall and wait forever for systrace-answers) by replacing
the read/write synchronisation with SIGSTOP/SIGCONT;
report and help hshoexer@; ok djm@, dtucker@
- dtucker@cvs.openbsd.org 2012/07/02 08:50:03
[ssh.c]
set interactive ToS for forwarded X11 sessions. ok djm@
- dtucker@cvs.openbsd.org 2012/07/02 12:13:26
[ssh-pkcs11-helper.c sftp-client.c]
fix a couple of "assigned but not used" warnings. ok markus@
- dtucker@cvs.openbsd.org 2012/07/02 14:37:06
[regress/connect-privsep.sh]
remove exit from end of test since it prevents reporting failure
- (dtucker) [regress/reexec.sh regress/sftp-cmds.sh regress/test-exec.sh]
Move cygwin detection to test-exec and use to skip reexec test on cygwin.
- (dtucker) [regress/test-exec.sh] Correct uname for cygwin/w2k.
20120629
- OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2012/06/21 00:16:07
[addrmatch.c]
fix strlcpy truncation check. from carsten at debian org, ok markus
- dtucker@cvs.openbsd.org 2012/06/22 12:30:26
[monitor.c sshconnect2.c]
remove dead code following 'for (;;)' loops.
From Steve.McClellan at radisys com, ok markus@
- dtucker@cvs.openbsd.org 2012/06/22 14:36:33
[sftp.c]
Remove unused variable leftover from tab-completion changes.
From Steve.McClellan at radisys com, ok markus@
- dtucker@cvs.openbsd.org 2012/06/26 11:02:30
[sandbox-systrace.c]
Add mquery to the list of allowed syscalls for "UsePrivilegeSeparation
sandbox" since malloc now uses it. From johnw.mail at gmail com.
- dtucker@cvs.openbsd.org 2012/06/28 05:07:45
[mac.c myproposal.h ssh_config.5 sshd_config.5]
Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed
from draft6 of the spec and will not be in the RFC when published. Patch
from mdb at juniper net via bz#2023, ok markus.
- naddy@cvs.openbsd.org 2012/06/29 13:57:25
[ssh_config.5 sshd_config.5]
match the documented MAC order of preference to the actual one; ok dtucker@
- dtucker@cvs.openbsd.org 2012/05/13 01:42:32
[regress/addrmatch.sh]
Add "Match LocalAddress" and "Match LocalPort" to sshd and adjust tests
to match. Feedback and ok djm@ markus@.
- djm@cvs.openbsd.org 2012/06/01 00:47:35
[regress/multiplex.sh regress/forwarding.sh]
append to rather than truncate test log; bz#2013 from openssh AT
roumenpetrov.info
- djm@cvs.openbsd.org 2012/06/01 00:52:52
[regress/sftp-cmds.sh]
don't delete .* on cleanup due to unintended env expansion; pointed out in
bz#2014 by openssh AT roumenpetrov.info
- dtucker@cvs.openbsd.org 2012/06/26 12:06:59
[regress/connect-privsep.sh]
test sandbox with every malloc option
- dtucker@cvs.openbsd.org 2012/06/28 05:07:45
[regress/try-ciphers.sh regress/cipher-speed.sh]
Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed
from draft6 of the spec and will not be in the RFC when published. Patch
from mdb at juniper net via bz#2023, ok markus.
- (dtucker) [myproposal.h] Remove trailing backslash to fix compile error.
- (dtucker) [key.c] ifdef out sha256 key types on platforms that don't have
the required functions in libcrypto.
20120628
- (dtucker) [openbsd-compat/getrrsetbyname-ldns.c] bz #2022: prevent null
pointer deref in the client when built with LDNS and using DNSSEC with a
CNAME. Patch from gregdlg+mr at hochet info.
20120622
- (dtucker) [contrib/cygwin/ssh-host-config] Ensure that user sshd runs as
can logon as a service. Patch from vinschen at redhat com.
20120620
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/12/02 00:41:56
[mux.c]
fix bz#1948: ssh -f doesn't fork for multiplexed connection.
ok dtucker@
- djm@cvs.openbsd.org 2011/12/04 23:16:12
[mux.c]
revert:
> revision 1.32
> date: 2011/12/02 00:41:56; author: djm; state: Exp; lines: +4 -1
> fix bz#1948: ssh -f doesn't fork for multiplexed connection.
> ok dtucker@
it interacts badly with ControlPersist
- djm@cvs.openbsd.org 2012/01/07 21:11:36
[mux.c]
fix double-free in new session handler
NB. Id sync only
- djm@cvs.openbsd.org 2012/05/23 03:28:28
[dns.c dns.h key.c key.h ssh-keygen.c]
add support for RFC6594 SSHFP DNS records for ECDSA key types.
patch from bugzilla-m67 AT nulld.me in bz#1978; ok + tweak markus@
(Original authors Ondřej Surý, Ondřej Caletka and Daniel Black)
- djm@cvs.openbsd.org 2012/06/01 00:49:35
[PROTOCOL.mux]
correct types of port numbers (integers, not strings); bz#2004 from
bert.wesarg AT googlemail.com
- djm@cvs.openbsd.org 2012/06/01 01:01:22
[mux.c]
fix memory leak when mux socket creation fails; bz#2002 from bert.wesarg
AT googlemail.com
- dtucker@cvs.openbsd.org 2012/06/18 11:43:53
[jpake.c]
correct sizeof usage. patch from saw at online.de, ok deraadt
- dtucker@cvs.openbsd.org 2012/06/18 11:49:58
[ssh_config.5]
RSA instead of DSA twice. From Steve.McClellan at radisys com
- dtucker@cvs.openbsd.org 2012/06/18 12:07:07
[ssh.1 sshd.8]
Remove mention of 'three' key files since there are now four. From
Steve.McClellan at radisys com.
- dtucker@cvs.openbsd.org 2012/06/18 12:17:18
[ssh.1]
Clarify description of -W. Noted by Steve.McClellan at radisys com,
ok jmc
- markus@cvs.openbsd.org 2012/06/19 18:25:28
[servconf.c servconf.h sshd_config.5]
sshd_config: extend Match to allow AcceptEnv and {Allow,Deny}{Users,Groups}
this allows 'Match LocalPort 1022' combined with 'AllowUser bauer'
ok djm@ (back in March)
- jmc@cvs.openbsd.org 2012/06/19 21:35:54
[sshd_config.5]
tweak previous; ok markus
- djm@cvs.openbsd.org 2012/06/20 04:42:58
[clientloop.c serverloop.c]
initialise accept() backoff timer to avoid EINVAL from select(2) in
rekeying
20120519
- (dtucker) [configure.ac] bz#2010: fix non-portable shell construct. Patch
from cjwatson at debian org.
- (dtucker) [configure.ac contrib/Makefile] bz#1996: use AC_PATH_TOOL to find
pkg-config so it does the right thing when cross-compiling. Patch from
cjwatson at debian org.
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2012/05/13 01:42:32
[servconf.h servconf.c sshd.8 sshd.c auth.c sshd_config.5]
Add "Match LocalAddress" and "Match LocalPort" to sshd and adjust tests
to match. Feedback and ok djm@ markus@.
- dtucker@cvs.openbsd.org 2012/05/19 06:30:30
[sshd_config.5]
Document PermitOpen none. bz#2001, patch from Loganaden Velvindron
20120504
- (dtucker) [configure.ac] Include <sys/param.h> rather than <sys/types.h>
to fix building on some plaforms. Fom bowman at math utah edu and
des at des no.
20120427
- (dtucker) [regress/addrmatch.sh] skip tests when running on a non-ipv6
platform rather than exiting early, so that we still clean up and return
success or failure to test-exec.sh
20120426
- (djm) [auth-passwd.c] Handle crypt() returning NULL; from Paul Wouters
via Niels
- (djm) [auth-krb5.c] Save errno across calls that might modify it;
ok dtucker@
20120423
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2012/04/23 08:18:17
[channels.c]
fix function proto/source mismatch
20120422
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2012/02/29 11:21:26
[ssh-keygen.c]
allow conversion of RSA1 keys to public PEM and PKCS8; "nice" markus@
- guenther@cvs.openbsd.org 2012/03/15 03:10:27
[session.c]
root should always be excluded from the test for /etc/nologin instead
of having it always enforced even when marked as ignorenologin. This
regressed when the logic was incompletely flipped around in rev 1.251
ok halex@ millert@
- djm@cvs.openbsd.org 2012/03/28 07:23:22
[PROTOCOL.certkeys]
explain certificate extensions/crit split rationale. Mention requirement
that each appear at most once per cert.
- dtucker@cvs.openbsd.org 2012/03/29 23:54:36
[channels.c channels.h servconf.c]
Add PermitOpen none option based on patch from Loganaden Velvindron
(bz #1949). ok djm@
- djm@cvs.openbsd.org 2012/04/11 13:16:19
[channels.c channels.h clientloop.c serverloop.c]
don't spin in accept() when out of fds (ENFILE/ENFILE) - back off for a
while; ok deraadt@ markus@
- djm@cvs.openbsd.org 2012/04/11 13:17:54
[auth.c]
Support "none" as an argument for AuthorizedPrincipalsFile to indicate
no file should be read.
- djm@cvs.openbsd.org 2012/04/11 13:26:40
[sshd.c]
don't spin in accept() when out of fds (ENFILE/ENFILE) - back off for a
while; ok deraadt@ markus@
- djm@cvs.openbsd.org 2012/04/11 13:34:17
[ssh-keyscan.1 ssh-keyscan.c]
now that sshd defaults to offering ECDSA keys, ssh-keyscan should also
look for them by default; bz#1971
- djm@cvs.openbsd.org 2012/04/12 02:42:32
[servconf.c servconf.h sshd.c sshd_config sshd_config.5]
VersionAddendum option to allow server operators to append some arbitrary
text to the SSH-... banner; ok deraadt@ "don't care" markus@
- djm@cvs.openbsd.org 2012/04/12 02:43:55
[sshd_config sshd_config.5]
mention AuthorizedPrincipalsFile=none default
- djm@cvs.openbsd.org 2012/04/20 03:24:23
[sftp.c]
setlinebuf(3) is more readable than setvbuf(.., _IOLBF, ...)
- jmc@cvs.openbsd.org 2012/04/20 16:26:22
[ssh.1]
use "brackets" instead of "braces", for consistency;
20120420
- (djm) [contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
[contrib/suse/openssh.spec] Update for release 6.0
- (djm) [README] Update URL to release notes.
- (djm) Release openssh-6.0
20120419
- (djm) [configure.ac] Fix compilation error on FreeBSD, whose libutil
contains openpty() but not login()
20120404
- (djm) [Makefile.in configure.ac sandbox-seccomp-filter.c] Add sandbox
mode for Linux's new seccomp filter; patch from Will Drewry; feedback
and ok dtucker@
20120330
- (dtucker) [contrib/redhat/openssh.spec] Bug #1992: remove now-gone WARNING
file from spec file. From crighter at nuclioss com.
- (djm) [entropy.c] bz#1991: relax OpenSSL version test to allow running
openssh binaries on a newer fix release than they were compiled on.
with and ok dtucker@
- (djm) [openbsd-compat/bsd-cygwin_util.h] #undef _WIN32 to avoid incorrect
assumptions when building on Cygwin; patch from Corinna Vinschen
20120309
- (djm) [openbsd-compat/port-linux.c] bz#1960: fix crash on SELinux
systems where sshd is run in te wrong context. Patch from Sven
Vermeulen; ok dtucker@
- (djm) [packet.c] bz#1963: Fix IPQoS not being set on non-mapped v4-in-v6
addressed connections. ok dtucker@
20120224
- (dtucker) [audit-bsm.c configure.ac] bug #1968: enable workarounds for BSM
audit breakage in Solaris 11. Patch from Magnus Johansson.
20120215
- (tim) [openbsd-compat/bsd-misc.h sshd.c] Fix conflicting return type for
unsetenv due to rev 1.14 change to setenv.c. Cast unsetenv to void in sshd.c
ok dtucker@
- (tim) [defines.h] move chunk introduced in 1.125 before MAXPATHLEN so
it actually works.
- (tim) [regress/keytype.sh] stderr redirection needs to be inside back quote
to work. Spotted by Angel Gonzalez
20120214
- (djm) [openbsd-compat/bsd-cygwin_util.c] Add PROGRAMFILES to list of
preserved Cygwin environment variables; from Corinna Vinschen
20120211
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2012/01/05 00:16:56
[monitor.c]
memleak on error path
- djm@cvs.openbsd.org 2012/01/07 21:11:36
[mux.c]
fix double-free in new session handler
- miod@cvs.openbsd.org 2012/01/08 13:17:11
[ssh-ecdsa.c]
Fix memory leak in ssh_ecdsa_verify(); from Loganaden Velvindron,
ok markus@
- miod@cvs.openbsd.org 2012/01/16 20:34:09
[ssh-pkcs11-client.c]
Fix a memory leak in pkcs11_rsa_private_encrypt(), reported by Jan Klemkow.
While there, be sure to buffer_clear() between send_msg() and recv_msg().
ok markus@
- dtucker@cvs.openbsd.org 2012/01/18 21:46:43
[clientloop.c]
Ensure that $DISPLAY contains only valid characters before using it to
extract xauth data so that it can't be used to play local shell
metacharacter games. Report from r00t_ati at ihteam.net, ok markus.
- markus@cvs.openbsd.org 2012/01/25 19:26:43
[packet.c]
do not permit SSH2_MSG_SERVICE_REQUEST/ACCEPT during rekeying;
ok dtucker@, djm@
- markus@cvs.openbsd.org 2012/01/25 19:36:31
[authfile.c]
memleak in key_load_file(); from Jan Klemkow
- markus@cvs.openbsd.org 2012/01/25 19:40:09
[packet.c packet.h]
packet_read_poll() is not used anymore.
- markus@cvs.openbsd.org 2012/02/09 20:00:18
[version.h]
move from 6.0-beta to 6.0
20120206
- (djm) [ssh-keygen.c] Don't fail in do_gen_all_hostkeys on platforms
that don't support ECC. Patch from Phil Oleson
20111219
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/12/02 00:41:56
[mux.c]
fix bz#1948: ssh -f doesn't fork for multiplexed connection.
ok dtucker@
- djm@cvs.openbsd.org 2011/12/02 00:43:57
[mac.c]
fix bz#1934: newer OpenSSL versions will require HMAC_CTX_Init before
HMAC_init (this change in policy seems insane to me)
ok dtucker@
- djm@cvs.openbsd.org 2011/12/04 23:16:12
[mux.c]
revert:
> revision 1.32
> date: 2011/12/02 00:41:56; author: djm; state: Exp; lines: +4 -1
> fix bz#1948: ssh -f doesn't fork for multiplexed connection.
> ok dtucker@
it interacts badly with ControlPersist
- djm@cvs.openbsd.org 2011/12/07 05:44:38
[auth2.c dh.c packet.c roaming.h roaming_client.c roaming_common.c]
fix some harmless and/or unreachable int overflows;
reported Xi Wang, ok markus@
20111125
- OpenBSD CVS Sync
- oga@cvs.openbsd.org 2011/11/16 12:24:28
[sftp.c]
Don't leak list in complete_cmd_parse if there are no commands found.
Discovered when I was ``borrowing'' this code for something else.
ok djm@
20111121
- (dtucker) [configure.ac] Set _FORTIFY_SOURCE. ok djm@
20111104
- (dtucker) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/10/18 05:15:28
[ssh.c]
ssh(1): skip attempting to create ~/.ssh when -F is passed; ok markus@
- djm@cvs.openbsd.org 2011/10/18 23:37:42
[ssh-add.c]
add -k to usage(); reminded by jmc@
- djm@cvs.openbsd.org 2011/10/19 00:06:10
[moduli.c]
s/tmpfile/tmp/ to make this -Wshadow clean
- djm@cvs.openbsd.org 2011/10/19 10:39:48
[umac.c]
typo in comment; patch from Michael W. Bombardieri
- djm@cvs.openbsd.org 2011/10/24 02:10:46
[ssh.c]
bz#1943: unbreak stdio forwarding when ControlPersist is in user - ssh
was incorrectly requesting the forward in both the control master and
slave. skip requesting it in the master to fix. ok markus@
- djm@cvs.openbsd.org 2011/10/24 02:13:13
[session.c]
bz#1859: send tty break to pty master instead of (probably already
closed) slave side; "looks good" markus@
- dtucker@cvs.openbsd.org 011/11/04 00:09:39
[moduli]
regenerated moduli file; ok deraadt
- (dtucker) [INSTALL LICENCE configure.ac openbsd-compat/Makefile.in
openbsd-compat/getrrsetbyname-ldns.c openbsd-compat/getrrsetbyname.c]
bz 1320: Add optional support for LDNS, a BSD licensed DNS resolver library
which supports DNSSEC. Patch from Simon Vallet (svallet at genoscope cns fr)
with some rework from myself and djm. ok djm.
20111025
- (dtucker) [contrib/cygwin/Makefile] Continue if installing a doc file
fails. Patch from Corinna Vinschen.
20111018
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/10/04 14:17:32
[sftp-glob.c]
silence error spam for "ls */foo" in directory with files; bz#1683
- dtucker@cvs.openbsd.org 2011/10/16 11:02:46
[moduli.c ssh-keygen.1 ssh-keygen.c]
Add optional checkpoints for moduli screening. feedback & ok deraadt
- jmc@cvs.openbsd.org 2011/10/16 15:02:41
[ssh-keygen.c]
put -K in the right place (usage());
- stsp@cvs.openbsd.org 2011/10/16 15:51:39
[moduli.c]
add missing includes to unbreak tree; fix from rpointel
- djm@cvs.openbsd.org 2011/10/18 04:58:26
[auth-options.c key.c]
remove explict search for \0 in packet strings, this job is now done
implicitly by buffer_get_cstring; ok markus
- djm@cvs.openbsd.org 2011/10/18 05:00:48
[ssh-add.1 ssh-add.c]
new "ssh-add -k" option to load plain keys (skipping certificates);
"looks ok" markus@
20111001
- (dtucker) [openbsd-compat/mktemp.c] Fix compiler warning. ok djm
- (dtucker) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2011/09/23 00:22:04
[channels.c auth-options.c servconf.c channels.h sshd.8]
Add wildcard support to PermitOpen, allowing things like "PermitOpen
localhost:*". bz #1857, ok djm markus.
- markus@cvs.openbsd.org 2011/09/23 07:45:05
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c
version.h]
unbreak remote portforwarding with dynamic allocated listen ports:
1) send the actual listen port in the open message (instead of 0).
this allows multiple forwardings with a dynamic listen port
2) update the matching permit-open entry, so we can identify where
to connect to
report: den at skbkontur.ru and P. Szczygielski
feedback and ok djm@
- djm@cvs.openbsd.org 2011/09/25 05:44:47
[auth2-pubkey.c]
improve the AuthorizedPrincipalsFile debug log message to include
file and line number
- dtucker@cvs.openbsd.org 2011/09/30 00:47:37
[sshd.c]
don't attempt privsep cleanup when not using privsep; ok markus@
- djm@cvs.openbsd.org 2011/09/30 21:22:49
[sshd.c]
fix inverted test that caused logspam; spotted by henning@
20110929
- (djm) [configure.ac defines.h] No need to detect sizeof(char); patch
from des AT des.no
- (dtucker) [configure.ac openbsd-compat/Makefile.in
openbsd-compat/strnlen.c] Add strnlen to the compat library.
20110923
- (djm) [openbsd-compat/getcwd.c] Remove OpenBSD rcsid marker since we no
longer want to sync this file (OpenBSD uses a __getcwd syscall now, we
want this longhand version)
- (djm) [openbsd-compat/getgrouplist.c] Remove OpenBSD rcsid marker: the
upstream version is YPified and we don't want this
- (djm) [openbsd-compat/mktemp.c] forklift upgrade to -current version.
The file was totally rewritten between what we had in tree and -current.
- (djm) [openbsd-compat/sha2.c openbsd-compat/sha2.h] Remove OpenBSD rcsid
marker. The upstream API has changed (function and structure names)
enough to put it out of sync with other providers of this interface.
- (djm) [openbsd-compat/setenv.c] Forklift upgrade, including inclusion
of static __findenv() function from upstream setenv.c
- OpenBSD CVS Sync
- millert@cvs.openbsd.org 2006/05/05 15:27:38
[openbsd-compat/strlcpy.c]
Convert do {} while loop -> while {} for clarity. No binary change
on most architectures. From Oliver Smith. OK deraadt@ and henning@
- tobias@cvs.openbsd.org 2007/10/21 11:09:30
[openbsd-compat/mktemp.c]
Comment fix about time consumption of _gettemp.
FreeBSD did this in revision 1.20.
OK deraadt@, krw@
- deraadt@cvs.openbsd.org 2008/07/22 21:47:45
[openbsd-compat/mktemp.c]
use arc4random_uniform(); ok djm millert
- millert@cvs.openbsd.org 2008/08/21 16:54:44
[openbsd-compat/mktemp.c]
Remove useless code, the kernel will set errno appropriately if an
element in the path does not exist. OK deraadt@ pvalchev@
- otto@cvs.openbsd.org 2008/12/09 19:38:38
[openbsd-compat/inet_ntop.c]
fix inet_ntop(3) prototype; ok millert@ libc to be bumbed very soon
20110922
- OpenBSD CVS Sync
- pyr@cvs.openbsd.org 2011/05/12 07:15:10
[openbsd-compat/glob.c]
When the max number of items for a directory has reached GLOB_LIMIT_READDIR
an error is returned but closedir() is not called.
spotted and fix provided by Frank Denis obsd-tech@pureftpd.org
ok otto@, millert@
- stsp@cvs.openbsd.org 2011/09/20 10:18:46
[glob.c]
In glob(3), limit recursion during matching attempts. Similar to
fnmatch fix. Also collapse consecutive '*' (from NetBSD).
ok miod deraadt
- djm@cvs.openbsd.org 2011/09/22 06:27:29
[glob.c]
fix GLOB_KEEPSTAT without GLOB_NOSORT; the implicit sort was being
applied only to the gl_pathv vector and not the corresponding gl_statv
array. reported in OpenSSH bz#1935; feedback and okay matthew@
- djm@cvs.openbsd.org 2011/08/26 01:45:15
[ssh.1]
Add some missing ssh_config(5) options that can be used in ssh(1)'s
-o argument. Patch from duclare AT guu.fi
- djm@cvs.openbsd.org 2011/09/05 05:56:13
[scp.1 sftp.1]
mention ControlPersist and KbdInteractiveAuthentication in the -o
verbiage in these pages too (prompted by jmc@)
- djm@cvs.openbsd.org 2011/09/05 05:59:08
[misc.c]
fix typo in IPQoS parsing: there is no "AF14" class, but there is
an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
- jmc@cvs.openbsd.org 2011/09/05 07:01:44
[scp.1]
knock out a useless Ns;
- deraadt@cvs.openbsd.org 2011/09/07 02:18:31
[ssh-keygen.1]
typo (they vs the) found by Lawrence Teo
- djm@cvs.openbsd.org 2011/09/09 00:43:00
[ssh_config.5 sshd_config.5]
fix typo in IPQoS parsing: there is no "AF14" class, but there is
an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
- djm@cvs.openbsd.org 2011/09/09 00:44:07
[PROTOCOL.mux]
MUX_C_CLOSE_FWD includes forward type in message (though it isn't
implemented anyway)
- djm@cvs.openbsd.org 2011/09/09 22:37:01
[scp.c]
suppress adding '--' to remote commandlines when the first argument
does not start with '-'. saves breakage on some difficult-to-upgrade
embedded/router platforms; feedback & ok dtucker ok markus
- djm@cvs.openbsd.org 2011/09/09 22:38:21
[sshd.c]
kill the preauth privsep child on fatal errors in the monitor;
ok markus@
- djm@cvs.openbsd.org 2011/09/09 22:46:44
[channels.c channels.h clientloop.h mux.c ssh.c]
support for cancelling local and remote port forwards via the multiplex
socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request
the cancellation of the specified forwardings; ok markus@
- markus@cvs.openbsd.org 2011/09/10 22:26:34
[channels.c channels.h clientloop.c ssh.1]
support cancellation of local/dynamic forwardings from ~C commandline;
ok & feedback djm@
- okan@cvs.openbsd.org 2011/09/11 06:59:05
[ssh.1]
document new -O cancel command; ok djm@
- markus@cvs.openbsd.org 2011/09/11 16:07:26
[sftp-client.c]
fix leaks in do_hardlink() and do_readlink(); bz#1921
from Loganaden Velvindron
- markus@cvs.openbsd.org 2011/09/12 08:46:15
[sftp-client.c]
fix leak in do_lsreaddir(); ok djm
- djm@cvs.openbsd.org 2011/09/22 06:29:03
[sftp.c]
don't let remote_glob() implicitly sort its results in do_globbed_ls() -
in all likelihood, they will be resorted anyway
20110909
- (dtucker) [entropy.h] Bug #1932: remove old definition of init_rng. From
Colin Watson.
20110906
- (djm) [README version.h] Correct version
- (djm) [contrib/redhat/openssh.spec] Correct restorcon => restorecon
- (djm) Respin OpenSSH-5.9p1 release
20110905
- (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
[contrib/suse/openssh.spec] Update version numbers.
20110904
- (djm) [regress/connect-privsep.sh regress/test-exec.sh] demote fatal
regress errors for the sandbox to warnings. ok tim dtucker
- (dtucker) [ssh-keygen.c ssh-pkcs11.c] Bug #1929: add null implementations
ofsh-pkcs11.cpkcs_init and pkcs_terminate for building without dlopen
support.
20110829
- (djm) [openbsd-compat/port-linux.c] Suppress logging when attempting
to switch SELinux context away from unconfined_t, based on patch from
Jan Chadima; bz#1919 ok dtucker@
20110827
- (dtucker) [auth-skey.c] Add log.h to fix build --with-skey.
20110818
- (tim) [configure.ac] Typo in error message spotted by Andy Tsouladze
20110817
- (tim) [mac.c myproposal.h] Wrap SHA256 and SHA512 in ifdefs for
OpenSSL 0.9.7. ok djm
- (djm) [ openbsd-compat/bsd-cygwin_util.c openbsd-compat/bsd-cygwin_util.h]
binary_pipe is no longer required on Cygwin; patch from Corinna Vinschen
- (djm) [configure.ac] error out if the host lacks the necessary bits for
an explicitly requested sandbox type
- (djm) [contrib/ssh-copy-id] Missing backlslash; spotted by
bisson AT archlinux.org
- (djm) OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2011/06/03 05:35:10
[regress/cfgmatch.sh]
use OBJ to find test configs, patch from Tim Rice
- markus@cvs.openbsd.org 2011/06/30 22:44:43
[regress/connect-privsep.sh]
test with sandbox enabled; ok djm@
- djm@cvs.openbsd.org 2011/08/02 01:23:41
[regress/cipher-speed.sh regress/try-ciphers.sh]
add SHA256/SHA512 based HMAC modes
- (djm) [regress/cipher-speed.sh regress/try-ciphers.sh] disable HMAC-SHA2
MAC tests for platforms that hack EVP_SHA2 support
20110812
- (dtucker) [openbsd-compat/port-linux.c] Bug 1924: Improve selinux context
change error by reporting old and new context names Patch from
jchadima at redhat.
- (djm) [contrib/redhat/openssh.spec contrib/redhat/sshd.init]
[contrib/suse/openssh.spec contrib/suse/rc.sshd] Updated RHEL and SLES
init scrips from imorgan AT nas.nasa.gov; bz#1920
- (djm) [contrib/ssh-copy-id] Fix failure for cases where the path to the
identify file contained whitespace. bz#1828 patch from gwenael.lambrouin
AT gmail.com; ok dtucker@
20110807
- (dtucker) OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2008/06/26 06:59:39
[moduli.5]
tweak previous;
- sobrado@cvs.openbsd.org 2009/10/28 08:56:54
[moduli.5]
"Diffie-Hellman" is the usual spelling for the cryptographic protocol
first published by Whitfield Diffie and Martin Hellman in 1976.
ok jmc@
- jmc@cvs.openbsd.org 2010/10/14 20:41:28
[moduli.5]
probabalistic -> probabilistic; from naddy
- dtucker@cvs.openbsd.org 2011/08/07 12:55:30
[sftp.1]
typo, fix from Laurent Gautrot
20110805
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/06/23 23:35:42
[monitor.c]
ignore EINTR errors from poll()
- tedu@cvs.openbsd.org 2011/07/06 18:09:21
[authfd.c]
bzero the agent address. the kernel was for a while very cranky about
these things. evne though that's fixed, always good to initialize
memory. ok deraadt djm
- djm@cvs.openbsd.org 2011/07/29 14:42:45
[sandbox-systrace.c]
fail open(2) with EPERM rather than SIGKILLing the whole process. libc
will call open() to do strerror() when NLS is enabled;
feedback and ok markus@
- markus@cvs.openbsd.org 2011/08/01 19:18:15
[gss-serv.c]
prevent post-auth resource exhaustion (int overflow leading to 4GB malloc);
report Adam Zabrock; ok djm@, deraadt@
- djm@cvs.openbsd.org 2011/08/02 01:22:11
[mac.c myproposal.h ssh.1 ssh_config.5 sshd.8 sshd_config.5]
Add new SHA256 and SHA512 based HMAC modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt
Patch from mdb AT juniper.net; feedback and ok markus@
- djm@cvs.openbsd.org 2011/08/02 23:13:01
[version.h]
crank now, release later
- djm@cvs.openbsd.org 2011/08/02 23:15:03
[ssh.c]
typo in comment
20110624
- (djm) [configure.ac Makefile.in sandbox-darwin.c] Add a sandbox for
Darwin/OS X using sandbox_init() + setrlimit(); feedback and testing
markus@
20110623
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/06/22 21:47:28
[servconf.c]
reuse the multistate option arrays to pretty-print options for "sshd -T"
- djm@cvs.openbsd.org 2011/06/22 21:57:01
[servconf.c servconf.h sshd.c sshd_config.5]
[configure.ac Makefile.in]
introduce sandboxing of the pre-auth privsep child using systrace(4).
This introduces a new "UsePrivilegeSeparation=sandbox" option for
sshd_config that applies mandatory restrictions on the syscalls the
privsep child can perform. This prevents a compromised privsep child
from being used to attack other hosts (by opening sockets and proxying)
or probing local kernel attack surface.
The sandbox is implemented using systrace(4) in unsupervised "fast-path"
mode, where a list of permitted syscalls is supplied. Any syscall not
on the list results in SIGKILL being sent to the privsep child. Note
that this requires a kernel with the new SYSTR_POLICY_KILL option.
UsePrivilegeSeparation=sandbox will become the default in the future
so please start testing it now.
feedback dtucker@; ok markus@
- djm@cvs.openbsd.org 2011/06/22 22:08:42
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c]
hook up a channel confirm callback to warn the user then requested X11
forwarding was refused by the server; ok markus@
- djm@cvs.openbsd.org 2011/06/23 09:34:13
[sshd.c ssh-sandbox.h sandbox.h sandbox-rlimit.c sandbox-systrace.c]
[sandbox-null.c]
rename sandbox.h => ssh-sandbox.h to make things easier for portable
- (djm) [sandbox-null.c] Dummy sandbox for platforms that don't support
setrlimit(2)
20110620
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/06/04 00:10:26
[ssh_config.5]
explain IdentifyFile's semantics a little better, prompted by bz#1898
ok dtucker jmc
- markus@cvs.openbsd.org 2011/06/14 22:49:18
[authfile.c]
make sure key_parse_public/private_rsa1() no longer consumes its input
buffer. fixes ssh-add for passphrase-protected ssh1-keys;
noted by naddy@; ok djm@
- djm@cvs.openbsd.org 2011/06/17 21:44:31
[log.c log.h monitor.c monitor.h monitor_wrap.c monitor_wrap.h sshd.c]
make the pre-auth privsep slave log via a socketpair shared with the
monitor rather than /var/empty/dev/log; ok dtucker@ deraadt@ markus@
- djm@cvs.openbsd.org 2011/06/17 21:46:16
[sftp-server.c]
the protocol version should be unsigned; bz#1913 reported by mb AT
smartftp.com
- djm@cvs.openbsd.org 2011/06/17 21:47:35
[servconf.c]
factor out multi-choice option parsing into a parse_multistate label
and some support structures; ok dtucker@
- djm@cvs.openbsd.org 2011/06/17 21:57:25
[clientloop.c]
setproctitle for a mux master that has been gracefully stopped;
bz#1911 from Bert.Wesarg AT googlemail.com
20110603
- (dtucker) [README version.h contrib/caldera/openssh.spec
contrib/redhat/openssh.spec contrib/suse/openssh.spec] Pull the version
bumps from the 5.8p2 branch into HEAD. ok djm.
- (tim) [configure.ac defines.h] Run test program to detect system mail
directory. Add --with-maildir option to override. Fixed OpenServer 6
getting it wrong. Fixed many systems having MAIL=/var/mail//username
ok dtucker
- (dtucker) [monitor.c] Remove the !HAVE_SOCKETPAIR case. We use socketpair
unconditionally in other places and the survey data we have does not show
any systems that use it. "nuke it" djm@
- (djm) [configure.ac] enable setproctitle emulation for OS X
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/06/03 00:54:38
[ssh.c]
bz#1883 - setproctitle() to identify mux master; patch from Bert.Wesarg
AT googlemail.com; ok dtucker@
NB. includes additional portability code to enable setproctitle emulation
on platforms that don't support it.
- dtucker@cvs.openbsd.org 2011/06/03 01:37:40
[ssh-agent.c]
Check current parent process ID against saved one to determine if the parent
has exited, rather than attempting to send a zero signal, since the latter
won't work if the parent has changed privs. bz#1905, patch from Daniel Kahn
Gillmor, ok djm@
- dtucker@cvs.openbsd.org 2011/05/31 02:01:58
[regress/dynamic-forward.sh]
back out revs 1.6 and 1.5 since it's not reliable
- dtucker@cvs.openbsd.org 2011/05/31 02:03:34
[regress/dynamic-forward.sh]
work around startup and teardown races; caught by deraadt
- dtucker@cvs.openbsd.org 2011/06/03 00:29:52
[regress/dynamic-forward.sh]
Retry establishing the port forwarding after a small delay, should make
the tests less flaky when the previous test is slow to shut down and free
up the port.
- (tim) [regress/cfgmatch.sh] Build/test out of tree fix.
20110529
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c]
[pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
- djm@cvs.openbsd.org 2011/05/23 03:33:38
[auth.c]
make secure_filename() spam debug logs less
- djm@cvs.openbsd.org 2011/05/23 03:52:55
[sshconnect.c]
remove extra newline
- jmc@cvs.openbsd.org 2011/05/23 07:10:21
[sshd.8 sshd_config.5]
tweak previous; ok djm
- djm@cvs.openbsd.org 2011/05/23 07:24:57
[authfile.c]
read in key comments for v.2 keys (though note that these are not
passed over the agent protocol); bz#439, based on patch from binder
AT arago.de; ok markus@
- djm@cvs.openbsd.org 2011/05/24 07:15:47
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c]
Remove undocumented legacy options UserKnownHostsFile2 and
GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile
accept multiple paths per line and making their defaults include
known_hosts2; ok markus
- djm@cvs.openbsd.org 2011/05/23 03:31:31
[regress/cfgmatch.sh]
include testing of multiple/overridden AuthorizedKeysFiles
refactor to simply daemon start/stop and get rid of racy constructs
20110520
- (djm) [session.c] call setexeccon() before executing passwd for pw
changes; bz#1891 reported by jchadima AT redhat.com; ok dtucker@
- (djm) [aclocal.m4 configure.ac] since gcc-4.x ignores all -Wno-options
options, we should corresponding -W-option when trying to determine
whether it is accepted. Also includes a warning fix on the program
fragment uses (bad main() return type).
bz#1900 and bz#1901 reported by g.esp AT free.fr; ok dtucker@
- (djm) [servconf.c] remove leftover droppings of AuthorizedKeysFile2
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/05/15 08:09:01
[authfd.c monitor.c serverloop.c]
use FD_CLOEXEC consistently; patch from zion AT x96.org
- djm@cvs.openbsd.org 2011/05/17 07:13:31
[key.c]
fatal() if asked to generate a legacy ECDSA cert (these don't exist)
and fix the regress test that was trying to generate them :)
- djm@cvs.openbsd.org 2011/05/20 00:55:02
[servconf.c]
the options TrustedUserCAKeys, RevokedKeysFile, AuthorizedKeysFile
and AuthorizedPrincipalsFile were not being correctly applied in
Match blocks, despite being overridable there; ok dtucker@
- dtucker@cvs.openbsd.org 2011/05/20 02:00:19
[servconf.c]
Add comment documenting what should be after the preauth check. ok djm
- djm@cvs.openbsd.org 2011/05/20 03:25:45
[monitor.c monitor_wrap.c servconf.c servconf.h]
use a macro to define which string options to copy between configs
for Match. This avoids problems caused by forgetting to keep three
code locations in perfect sync and ordering
"this is at once beautiful and horrible" + ok dtucker@
- djm@cvs.openbsd.org 2011/05/17 07:13:31
[regress/cert-userkey.sh]
fatal() if asked to generate a legacy ECDSA cert (these don't exist)
and fix the regress test that was trying to generate them :)
- djm@cvs.openbsd.org 2011/05/20 02:43:36
[cert-hostkey.sh]
another attempt to generate a v00 ECDSA key that broke the test
ID sync only - portable already had this somehow
- dtucker@cvs.openbsd.org 2011/05/20 05:19:50
[dynamic-forward.sh]
Prevent races in dynamic forwarding test; ok djm
- dtucker@cvs.openbsd.org 2011/05/20 06:32:30
[dynamic-forward.sh]
fix dumb error in dynamic-forward test
20110515
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/05/05 05:12:08
[mux.c]
gracefully fall back when ControlPath is too large for a
sockaddr_un. ok markus@ as part of a larger diff
- dtucker@cvs.openbsd.org 2011/05/06 01:03:35
[sshd_config]
clarify language about overriding defaults. bz#1892, from Petr Cerny
- djm@cvs.openbsd.org 2011/05/06 01:09:53
[sftp.1]
mention that IPv6 addresses must be enclosed in square brackets;
bz#1845
- djm@cvs.openbsd.org 2011/05/06 02:05:41
[sshconnect2.c]
fix memory leak; bz#1849 ok dtucker@
- djm@cvs.openbsd.org 2011/05/06 21:14:05
[packet.c packet.h]
set traffic class for IPv6 traffic as we do for IPv4 TOS;
patch from lionel AT mamane.lu via Colin Watson in bz#1855;
ok markus@
- djm@cvs.openbsd.org 2011/05/06 21:18:02
[ssh.c ssh_config.5]
add a %L expansion (short-form of the local host name) for ControlPath;
sync some more expansions with LocalCommand; ok markus@
- djm@cvs.openbsd.org 2011/05/06 21:31:38
[readconf.c ssh_config.5]
support negated Host matching, e.g.
Host *.example.org !c.example.org
User mekmitasdigoat
Will match "a.example.org", "b.example.org", but not "c.example.org"
ok markus@
- djm@cvs.openbsd.org 2011/05/06 21:34:32
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5]
Add a RequestTTY ssh_config option to allow configuration-based
control over tty allocation (like -t/-T); ok markus@
- djm@cvs.openbsd.org 2011/05/06 21:38:58
[ssh.c]
fix dropping from previous diff
- djm@cvs.openbsd.org 2011/05/06 22:20:10
[PROTOCOL.mux]
fix numbering; from bert.wesarg AT googlemail.com
- jmc@cvs.openbsd.org 2011/05/07 23:19:39
[ssh_config.5]
- tweak previous
- come consistency fixes
ok djm
- jmc@cvs.openbsd.org 2011/05/07 23:20:25
[ssh.1]
+.It RequestTTY
- djm@cvs.openbsd.org 2011/05/08 12:52:01
[PROTOCOL.mux clientloop.c clientloop.h mux.c]
improve our behaviour when TTY allocation fails: if we are in
RequestTTY=auto mode (the default), then do not treat at TTY
allocation error as fatal but rather just restore the local TTY
to cooked mode and continue. This is more graceful on devices that
never allocate TTYs.
If RequestTTY is set to "yes" or "force", then failure to allocate
a TTY is fatal.
ok markus@
- djm@cvs.openbsd.org 2011/05/10 05:46:46
[authfile.c]
despam debug() logs by detecting that we are trying to load a private key
in key_try_load_public() and returning early; ok markus@
- djm@cvs.openbsd.org 2011/05/11 04:47:06
[auth.c auth.h auth2-pubkey.c pathnames.h servconf.c servconf.h]
remove support for authorized_keys2; it is a relic from the early days
of protocol v.2 support and has been undocumented for many years;
ok markus@
- djm@cvs.openbsd.org 2011/05/13 00:05:36
[authfile.c]
warn on unexpected key type in key_parse_private_type()
- (djm) [packet.c] unbreak portability #endif
20110510
- (dtucker) [openbsd-compat/openssl-compat.{c,h}] Bug #1882: fix
--with-ssl-engine which was broken with the change from deprecated
SSLeay_add_all_algorithms(). ok djm
20110506
- (dtucker) [openbsd-compat/regress/closefromtest.c] Bug #1875: add prototype
for closefrom() in test code. Report from Dan Wallis via Gentoo.
20110505
- (djm) [defines.h] Move up include of netinet/ip.h for IPTOS
definitions. From des AT des.no
- (djm) [Makefile.in WARNING.RNG aclocal.m4 buildpkg.sh.in configure.ac]
[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
[ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
[regress/README.regress] Remove ssh-rand-helper and all its
tentacles. PRNGd seeding has been rolled into entropy.c directly.
Thanks to tim@ for testing on affected platforms.
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/03/10 02:52:57
[auth2-gss.c auth2.c auth.h]
allow GSSAPI authentication to detect when a server-side failure causes
authentication failure and don't count such failures against MaxAuthTries;
bz#1244 from simon AT sxw.org.uk; ok markus@ before lock
- okan@cvs.openbsd.org 2011/03/15 10:36:02
[ssh-keyscan.c]
use timerclear macro
ok djm@
- stevesk@cvs.openbsd.org 2011/03/23 15:16:22
[ssh-keygen.1 ssh-keygen.c]
Add -A option. For each of the key types (rsa1, rsa, dsa and ecdsa)
for which host keys do not exist, generate the host keys with the
default key file path, an empty passphrase, default bits for the key
type, and default comment. This will be used by /etc/rc to generate
new host keys. Idea from deraadt.
ok deraadt
- stevesk@cvs.openbsd.org 2011/03/23 16:24:56
[ssh-keygen.1]
-q not used in /etc/rc now so remove statement.
- stevesk@cvs.openbsd.org 2011/03/23 16:50:04
[ssh-keygen.c]
remove -d, documentation removed >10 years ago; ok markus
- jmc@cvs.openbsd.org 2011/03/24 15:29:30
[ssh-keygen.1]
zap trailing whitespace;
- stevesk@cvs.openbsd.org 2011/03/24 22:14:54
[ssh-keygen.c]
use strcasecmp() for "clear" cert permission option also; ok djm
- stevesk@cvs.openbsd.org 2011/03/29 18:54:17
[misc.c misc.h servconf.c]
print ipqos friendly string for sshd -T; ok markus
# sshd -Tf sshd_config|grep ipqos
ipqos lowdelay throughput
- djm@cvs.openbsd.org 2011/04/12 04:23:50
[ssh-keygen.c]
fix -Wshadow
- djm@cvs.openbsd.org 2011/04/12 05:32:49
[sshd.c]
exit with 0 status on SIGTERM; bz#1879
- djm@cvs.openbsd.org 2011/04/13 04:02:48
[ssh-keygen.1]
improve wording; bz#1861
- djm@cvs.openbsd.org 2011/04/13 04:09:37
[ssh-keygen.1]
mention valid -b sizes for ECDSA keys; bz#1862
- djm@cvs.openbsd.org 2011/04/17 22:42:42
[PROTOCOL.mux clientloop.c clientloop.h mux.c ssh.1 ssh.c]
allow graceful shutdown of multiplexing: request that a mux server
removes its listener socket and refuse future multiplexing requests;
ok markus@
- djm@cvs.openbsd.org 2011/04/18 00:46:05
[ssh-keygen.c]
certificate options are supposed to be packed in lexical order of
option name (though we don't actually enforce this at present).
Move one up that was out of sequence
- djm@cvs.openbsd.org 2011/05/04 21:15:29
[authfile.c authfile.h ssh-add.c]
allow "ssh-add - < key"; feedback and ok markus@
- (tim) [configure.ac] Add AC_LANG_SOURCE to OPENSSH_CHECK_CFLAG_COMPILE
so autoreconf 2.68 is happy.
- (tim) [defines.h] Deal with platforms that do not have S_IFSOCK ok djm@
20110221
- (dtucker) [contrib/cygwin/ssh-host-config] From Corinna: revamp of the
Cygwin-specific service installer script ssh-host-config. The actual
functionality is the same, the revisited version is just more
exact when it comes to check for problems which disallow to run
certain aspects of the script. So, part of this script and the also
rearranged service helper script library "csih" is to check if all
the tools required to run the script are available on the system.
The new script also is more thorough to inform the user why the
script failed. Patch from vinschen at redhat com.
20110218
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/02/16 00:31:14
[ssh-keysign.c]
make hostbased auth with ECDSA keys work correctly. Based on patch
by harvey.eneman AT oracle.com in bz#1858; ok markus@ (pre-lock)
20110206
- (dtucker) [openbsd-compat/port-linux.c] Bug #1851: fix syntax error in
selinux code. Patch from Leonardo Chiquitto
- (dtucker) [contrib/cygwin/ssh-{host,user}-config] Add ECDSA key
generation and simplify. Patch from Corinna Vinschen.
20110204
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/01/31 21:42:15
[PROTOCOL.mux]
cut'n'pasto; from bert.wesarg AT googlemail.com
- djm@cvs.openbsd.org 2011/02/04 00:44:21
[key.c]
fix uninitialised nonce variable; reported by Mateusz Kocielski
- djm@cvs.openbsd.org 2011/02/04 00:44:43
[version.h]
openssh-5.8
- (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
[contrib/suse/openssh.spec] update versions in docs and spec files.
- Release OpenSSH 5.8p1
20110128
- (djm) [openbsd-compat/port-linux.c] Check whether SELinux is enabled
before attempting setfscreatecon(). Check whether matchpathcon()
succeeded before using its result. Patch from cjwatson AT debian.org;
bz#1851
20110127
- (tim) [config.guess config.sub] Sync with upstream.
- (tim) [configure.ac] Consistent M4 quoting throughout, updated obsolete
AC_TRY_COMPILE with AC_COMPILE_IFELSE, updated obsolete AC_TRY_LINK with
AC_LINK_IFELSE, updated obsolete AC_TRY_RUN with AC_RUN_IFELSE, misc white
space changes for consistency/readability. Makes autoconf 2.68 happy.
"Nice work" djm
20110125
- (djm) [configure.ac Makefile.in ssh.c openbsd-compat/port-linux.c
openbsd-compat/port-linux.h] Move SELinux-specific code from ssh.c to
port-linux.c to avoid compilation errors. Add -lselinux to ssh when
building with SELinux support to avoid linking failure; report from
amk AT spamfence.net; ok dtucker
20110122
- (dtucker) [configure.ac openbsd-compat/openssl-compat.{c,h}] Add
RSA_get_default_method() for the benefit of openssl versions that don't
have it (at least openssl-engine-0.9.6b). Found and tested by Kevin Brott,
ok djm@.
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/01/22 09:18:53
[version.h]
crank to OpenSSH-5.7
- (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
[contrib/suse/openssh.spec] update versions in docs and spec files.
- (djm) Release 5.7p1
20110119
- (tim) [contrib/caldera/openssh.spec] Use CFLAGS from Makefile instead
of RPM so build completes. Signatures were changed to .asc since 4.1p1.
- (djm) [configure.ac] Disable ECC on OpenSSL <0.9.8g. Releases prior to
0.9.8 lacked it, and 0.9.8a through 0.9.8d have proven buggy in pre-
release testing (random crashes and failure to load ECC keys).
ok dtucker@
20110117
- (djm) [regress/Makefile] use $TEST_SSH_KEYGEN instead of the one in
$PATH, fix cleanup of droppings; reported by openssh AT
roumenpetrov.info; ok dtucker@
- (djm) [regress/agent-ptrace.sh] Fix false failure on OS X by adding
its unique snowflake of a gdb error to the ones we look for.
- (djm) [regress/agent-getpeereid.sh] leave stdout attached when running
ssh-add to avoid $SUDO failures on Linux
- (dtucker) [openbsd-compat/port-linux.c] Bug #1838: Add support for the new
Linux OOM-killer magic values that changed in 2.6.36 kernels, with fallback
to the old values. Feedback from vapier at gentoo org and djm, ok djm.
- (djm) [configure.ac regress/agent-getpeereid.sh regress/multiplex.sh]
[regress/sftp-glob.sh regress/test-exec.sh] Rework how feature tests are
disabled on platforms that do not support them; add a "config_defined()"
shell function that greps for defines in config.h and use them to decide
on feature tests.
Convert a couple of existing grep's over config.h to use the new function
Add a define "FILESYSTEM_NO_BACKSLASH" for filesystem that can't represent
backslash characters in filenames, enable it for Cygwin and use it to turn
of tests for quotes backslashes in sftp-glob.sh.
based on discussion with vinschen AT redhat.com and dtucker@; ok dtucker@
- (tim) [regress/agent-getpeereid.sh] shell portability fix.
- (dtucker) [openbsd-compat/port-linux.c] Fix minor bug caught by -Werror on
the tinderbox.
- (dtucker) [LICENCE Makefile.in audit-bsm.c audit-linux.c audit.c audit.h
configure.ac defines.h loginrec.c] Bug #1402: add linux audit subsystem
support, based on patches from Tomas Mraz and jchadima at redhat.
20110116
- (dtucker) [Makefile.in configure.ac regress/kextype.sh] Skip sha256-based
on configurations that don't have it.
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/01/16 11:50:05
[clientloop.c]
Use atomicio when flushing protocol 1 std{out,err} buffers at
session close. This was a latent bug exposed by setting a SIGCHLD
handler and spotted by kevin.brott AT gmail.com; ok dtucker@
- djm@cvs.openbsd.org 2011/01/16 11:50:36
[sshconnect.c]
reset the SIGPIPE handler when forking to execute child processes;
ok dtucker@
- djm@cvs.openbsd.org 2011/01/16 12:05:59
[clientloop.c]
a couple more tweaks to the post-close protocol 1 stderr/stdout flush:
now that we use atomicio(), convert them from while loops to if statements
add test and cast to compile cleanly with -Wsigned
20110114
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/01/13 21:54:53
[mux.c]
correct error messages; patch from bert.wesarg AT googlemail.com
- djm@cvs.openbsd.org 2011/01/13 21:55:25
[PROTOCOL.mux]
correct protocol names and add a couple of missing protocol number
defines; patch from bert.wesarg AT googlemail.com
- (djm) [Makefile.in] Use shell test to disable ecdsa key generating in
host-key-force target rather than a substitution that is replaced with a
comment so that the Makefile.in is still a syntactically valid Makefile
(useful to run the distprep target)
- (tim) [regress/cert-hostkey.sh] Typo. Missing $ on variable name.
- (tim) [regress/cert-hostkey.sh] Add missing TEST_SSH_ECC guard around some
ecdsa bits.
20110113
- (djm) [misc.c] include time.h for nanosleep() prototype
- (tim) [Makefile.in] test the ECC bits if we have the capability. ok djm
- (tim) [Makefile.in configure.ac opensshd.init.in] Add support for generating
ecdsa keys. ok djm.
- (djm) [entropy.c] cast OPENSSL_VERSION_NUMBER to u_long to avoid
gcc warning on platforms where it defaults to int
- (djm) [regress/Makefile] add a few more generated files to the clean
target
- (djm) [myproposal.h] Fix reversed OPENSSL_VERSION_NUMBER test and bad
#define that was causing diffie-hellman-group-exchange-sha256 to be
incorrectly disabled
- (djm) [regress/kextype.sh] Testing diffie-hellman-group-exchange-sha256
should not depend on ECC support
20110112
- OpenBSD CVS Sync
- nicm@cvs.openbsd.org 2010/10/08 21:48:42
[openbsd-compat/glob.c]
Extend GLOB_LIMIT to cover readdir and stat and bump the malloc limit
from ARG_MAX to 64K.
Fixes glob-using programs (notably ftp) able to be triggered to hit
resource limits.
Idea from a similar NetBSD change, original problem reported by jasper@.
ok millert tedu jasper
- djm@cvs.openbsd.org 2011/01/12 01:53:14
avoid some integer overflows mostly with GLOB_APPEND and GLOB_DOOFFS
and sanity check arguments (these will be unnecessary when we switch
struct glob members from being type into to size_t in the future);
"looks ok" tedu@ feedback guenther@
- (djm) [configure.ac] Turn on -Wno-unused-result for gcc >= 4.4 to avoid
silly warnings on write() calls we don't care succeed or not.
- (djm) [configure.ac] Fix broken test for gcc >= 4.4 with per-compiler
flag tests that don't depend on gcc version at all; suggested by and
ok dtucker@
20110111
- (tim) [regress/host-expand.sh] Fix for building outside of read only
source tree.
- (djm) [platform.c] Some missing includes that show up under -Werror
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2011/01/08 10:51:51
[clientloop.c]
use host and not options.hostname, as the latter may have unescaped
substitution characters
- djm@cvs.openbsd.org 2011/01/11 06:06:09
[sshlogin.c]
fd leak on error paths; from zinovik@
NB. Id sync only; we use loginrec.c that was also audited and fixed
recently
- djm@cvs.openbsd.org 2011/01/11 06:13:10
[clientloop.c ssh-keygen.c sshd.c]
some unsigned long long casts that make things a bit easier for
portable without resorting to dropping PRIu64 formats everywhere
20110109
- (djm) [Makefile.in] list ssh_host_ecdsa key in PATHSUBS; spotted by
openssh AT roumenpetrov.info
20110108
- (djm) [regress/keytype.sh] s/echo -n/echon/ to repair failing regress
test on OSX and others. Reported by imorgan AT nas.nasa.gov
20110107
- (djm) [regress/cert-hostkey.sh regress/cert-userkey.sh] fix shell test
for no-ECC case. Patch from cristian.ionescu-idbohrn AT axis.com
- djm@cvs.openbsd.org 2011/01/06 22:23:53
[ssh.c]
unbreak %n expansion in LocalCommand; patch from bert.wesarg AT
googlemail.com; ok markus@
- djm@cvs.openbsd.org 2011/01/06 22:23:02
[clientloop.c]
when exiting due to ServerAliveTimeout, mention the hostname that caused
it (useful with backgrounded controlmaster)
- djm@cvs.openbsd.org 2011/01/06 22:46:21
[regress/Makefile regress/host-expand.sh]
regress test for LocalCommand %n expansion from bert.wesarg AT
googlemail.com; ok markus@
- djm@cvs.openbsd.org 2011/01/06 23:01:35
[sshconnect.c]
reset SIGCHLD handler to SIG_DFL when execuring LocalCommand;
ok markus@
20110106
- (djm) OpenBSD CVS Sync
- markus@cvs.openbsd.org 2010/12/08 22:46:03
[scp.1 scp.c]
add a new -3 option to scp: Copies between two remote hosts are
transferred through the local host. Without this option the data
is copied directly between the two remote hosts. ok djm@ (bugzilla #1837)
- jmc@cvs.openbsd.org 2010/12/09 14:13:33
[scp.1 scp.c]
scp.1: grammer fix
scp.c: add -3 to usage()
- markus@cvs.openbsd.org 2010/12/14 11:59:06
[sshconnect.c]
don't mention key type in key-changed-warning, since we also print
this warning if a new key type appears. ok djm@
- djm@cvs.openbsd.org 2010/12/15 00:49:27
[readpass.c]
fix ControlMaster=ask regression
reset SIGCHLD handler before fork (and restore it after) so we don't miss
the the askpass child's exit status. Correct test for exit status/signal to
account for waitpid() failure; with claudio@ ok claudio@ markus@
- djm@cvs.openbsd.org 2010/12/24 21:41:48
[auth-options.c]
don't send the actual forced command in a debug message; ok markus deraadt
- otto@cvs.openbsd.org 2011/01/04 20:44:13
[ssh-keyscan.c]
handle ecdsa-sha2 with various key lengths; hint and ok djm@
20110104
- (djm) [configure.ac Makefile.in] Use mandoc as preferred manpage
formatter if it is present, followed by nroff and groff respectively.
Fixes distprep target on OpenBSD (which has bumped groff/nroff to ports
in favour of mandoc). feedback and ok tim
20110103
- (djm) [Makefile.in] revert local hack I didn't intend to commit
20110102
- (djm) [loginrec.c] Fix some fd leaks on error paths. ok dtucker
- (djm) [configure.ac] Check whether libdes is needed when building
with Heimdal krb5 support. On OpenBSD this library no longer exists,
so linking it unconditionally causes a build failure; ok dtucker
20101226
- (dtucker) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/12/08 04:02:47
[ssh_config.5 sshd_config.5]
explain that IPQoS arguments are separated by whitespace; iirc requested
by jmc@ a while back
20101205
- (dtucker) openbsd-compat/openssl-compat.c] remove sleep leftover from
debugging. Spotted by djm.
- (dtucker) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/12/03 23:49:26
[schnorr.c]
check that g^x^q === 1 mod p; recommended by JPAKE author Feng Hao
(this code is still disabled, but apprently people are treating it as
a reference implementation)
- djm@cvs.openbsd.org 2010/12/03 23:55:27
[auth-rsa.c]
move check for revoked keys to run earlier (in auth_rsa_key_allowed)
bz#1829; patch from ldv AT altlinux.org; ok markus@
- djm@cvs.openbsd.org 2010/12/04 00:18:01
[sftp-server.c sftp.1 sftp-client.h sftp.c PROTOCOL sftp-client.c]
add a protocol extension to support a hard link operation. It is
available through the "ln" command in the client. The old "ln"
behaviour of creating a symlink is available using its "-s" option
or through the preexisting "symlink" command; based on a patch from
miklos AT szeredi.hu in bz#1555; ok markus@
- djm@cvs.openbsd.org 2010/12/04 13:31:37
[hostfile.c]
fix fd leak; spotted and ok dtucker
- djm@cvs.openbsd.org 2010/12/04 00:21:19
[regress/sftp-cmds.sh]
adjust for hard-link support
- (dtucker) [regress/Makefile] Id sync.
20101204
- (djm) [openbsd-compat/bindresvport.c] Use arc4random_uniform(range)
instead of (arc4random() % range)
- (dtucker) [configure.ac moduli.c openbsd-compat/openssl-compat.{c,h}] Add
shims for the new, non-deprecated OpenSSL key generation functions for
platforms that don't have the new interfaces.
20101201
- OpenBSD CVS Sync
- deraadt@cvs.openbsd.org 2010/11/20 05:12:38
[auth2-pubkey.c]
clean up cases of ;;
- djm@cvs.openbsd.org 2010/11/21 01:01:13
[clientloop.c misc.c misc.h ssh-agent.1 ssh-agent.c]
honour $TMPDIR for client xauth and ssh-agent temporary directories;
feedback and ok markus@
- djm@cvs.openbsd.org 2010/11/21 10:57:07
[authfile.c]
Refactor internals of private key loading and saving to work on memory
buffers rather than directly on files. This will make a few things
easier to do in the future; ok markus@
- djm@cvs.openbsd.org 2010/11/23 02:35:50
[auth.c]
use strict_modes already passed as function argument over referencing
global options.strict_modes
- djm@cvs.openbsd.org 2010/11/23 23:57:24
[clientloop.c]
avoid NULL deref on receiving a channel request on an unknown or invalid
channel; report bz#1842 from jchadima AT redhat.com; ok dtucker@
- djm@cvs.openbsd.org 2010/11/24 01:24:14
[channels.c]
remove a debug() that pollutes stderr on client connecting to a server
in debug mode (channel_close_fds is called transitively from the session
code post-fork); bz#1719, ok dtucker
- djm@cvs.openbsd.org 2010/11/25 04:10:09
[session.c]
replace close() loop for fds 3->64 with closefrom();
ok markus deraadt dtucker
- djm@cvs.openbsd.org 2010/11/26 05:52:49
[scp.c]
Pass through ssh command-line flags and options when doing remote-remote
transfers, e.g. to enable agent forwarding which is particularly useful
in this case; bz#1837 ok dtucker@
- markus@cvs.openbsd.org 2010/11/29 18:57:04
[authfile.c]
correctly load comment for encrypted rsa1 keys;
report/fix Joachim Schipper; ok djm@
- djm@cvs.openbsd.org 2010/11/29 23:45:51
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
[sshconnect.h sshconnect2.c]
automatically order the hostkeys requested by the client based on
which hostkeys are already recorded in known_hosts. This avoids
hostkey warnings when connecting to servers with new ECDSA keys
that are preferred by default; with markus@
20101124
- (dtucker) [platform.c session.c] Move the getluid call out of session.c and
into the platform-specific code Only affects SCO, tested by and ok tim@.
- (djm) [loginrec.c] Relax permission requirement on btmp logs to allow
group read/write. ok dtucker@
- (dtucker) [packet.c] Remove redundant local declaration of "int tos".
- (djm) [defines.h] Add IP DSCP defines
20101122
- (dtucker) Bug #1840: fix warning when configuring --with-ssl-engine, patch
from vapier at gentoo org.
20101120
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/11/05 02:46:47
[packet.c]
whitespace KNF
- djm@cvs.openbsd.org 2010/11/10 01:33:07
[kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c moduli.c]
use only libcrypto APIs that are retained with OPENSSL_NO_DEPRECATED.
these have been around for years by this time. ok markus
- djm@cvs.openbsd.org 2010/11/13 23:27:51
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
- jmc@cvs.openbsd.org 2010/11/15 07:40:14
[ssh_config.5]
libary -> library;
- jmc@cvs.openbsd.org 2010/11/18 15:01:00
[scp.1 sftp.1 ssh.1 sshd_config.5]
add IPQoS to the various -o lists, and zap some trailing whitespace;
20101111
- (djm) [servconf.c ssh-add.c ssh-keygen.c] don't look for ECDSA keys on
platforms that don't support ECC. Fixes some spurious warnings reported
by tim@
20101109
- (tim) [regress/kextype.sh] Not all platforms have time in /usr/bin.
Feedback from dtucker@
- (tim) [configure.ac openbsd-compat/bsd-misc.h openbsd-compat/bsd-misc.c] Add
support for platforms missing isblank(). ok djm@
20101108
- (tim) [regress/Makefile] Fixes to allow building/testing outside source
tree.
- (tim) [regress/kextype.sh] Shell portability fix.
20101107
- (dtucker) [platform.c] includes.h instead of defines.h so that we get
the correct typedefs.
20101105
- (djm) [loginrec.c loginrec.h] Use correct uid_t/pid_t types instead of
int. Should fix bz#1817 cleanly; ok dtucker@
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/09/22 12:26:05
[regress/Makefile regress/kextype.sh]
regress test for each of the key exchange algorithms that we support
- djm@cvs.openbsd.org 2010/10/28 11:22:09
[authfile.c key.c key.h ssh-keygen.c]
fix a possible NULL deref on loading a corrupt ECDH key
store ECDH group information in private keys files as "named groups"
rather than as a set of explicit group parameters (by setting
the OPENSSL_EC_NAMED_CURVE flag). This makes for shorter key files and
retrieves the group's OpenSSL NID that we need for various things.
- jmc@cvs.openbsd.org 2010/10/28 18:33:28
[scp.1 ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
knock out some "-*- nroff -*-" lines;
- djm@cvs.openbsd.org 2010/11/04 02:45:34
[sftp-server.c]
umask should be parsed as octal. reported by candland AT xmission.com;
ok markus@
- (dtucker) [configure.ac platform.{c,h} session.c
openbsd-compat/port-solaris.{c,h}] Bug #1824: Add Solaris Project support.
Patch from cory.erickson at csu mnscu edu with a bit of rework from me.
ok djm@
- (dtucker) [platform.c platform.h session.c] Add a platform hook to run
after the user's groups are established and move the selinux calls into it.
- (dtucker) [platform.c session.c] Move the AIX setpcred+chroot hack into
platform.c
- (dtucker) [platform.c session.c] Move the BSDI setpgrp into platform.c.
- (dtucker) [platform.c] Only call setpgrp on BSDI if running as root to
retain previous behavior.
- (dtucker) [platform.c session.c] Move the PAM credential establishment for
the LOGIN_CAP case into platform.c.
- (dtucker) platform.c session.c] Move the USE_LIBIAF fragment into
platform.c
- (dtucker) [platform.c session.c] Move aix_usrinfo frament into platform.c.
- (dtucker) [platform.c session.c] Move irix setusercontext fragment into
platform.c.
- (dtucker) [platform.c session.c] Move PAM credential establishment for the
non-LOGIN_CAP case into platform.c.
- (dtucker) [platform.c platform.h session.c] Move the Cygwin special-case
check into platform.c
- (dtucker) [regress/keytype.sh] Import new test.
- (dtucker) [Makefile configure.ac regress/Makefile regress/keytype.sh]
Import recent changes to regress/Makefile, pass a flag to enable ECC tests
from configure through to regress/Makefile and use it in the tests.
- (dtucker) [regress/kextype.sh] Add missing "test".
- (dtucker) [regress/kextype.sh] Make sha256 test depend on ECC. This is not
strictly correct since while ECC requires sha256 the reverse is not true
however it does prevent spurious test failures.
- (dtucker) [platform.c] Need servconf.h and extern options.
20101025
- (tim) [openbsd-compat/glob.h] Remove sys/cdefs.h include that came with
1.12 to unbreak Solaris build.
ok djm@
- (dtucker) [defines.h] Use SIZE_T_MAX for SIZE_MAX for platforms that have a
native one.
20101024
- (dtucker) [includes.h] Add missing ifdef GLOB_HAS_GL_STATV to fix build.
- (dtucker) [regress/cert-hostkey.sh] Disable ECC-based tests on platforms
which don't have ECC support in libcrypto.
- (dtucker) [regress/cert-userkey.sh] Disable ECC-based tests on platforms
which don't have ECC support in libcrypto.
- (dtucker) [defines.h] Add SIZE_MAX for the benefit of platforms that don't
have it.
- (dtucker) OpenBSD CVS Sync
- sthen@cvs.openbsd.org 2010/10/23 22:06:12
[sftp.c]
escape '[' in filename tab-completion; fix a type while there.
ok djm@
20101021
- OpenBSD CVS Sync
- dtucker@cvs.openbsd.org 2010/10/12 02:22:24
[mux.c]
Typo in confirmation message. bz#1827, patch from imorgan at
nas nasa gov
- djm@cvs.openbsd.org 2010/08/31 12:24:09
[regress/cert-hostkey.sh regress/cert-userkey.sh]
tests for ECDSA certificates
20101011
- (djm) [canohost.c] Zero a4 instead of addr to better match type.
bz#1825, reported by foo AT mailinator.com
- (djm) [sshconnect.c] Need signal.h for prototype for kill(2)
20101011
- (djm) [configure.ac] Use = instead of == in shell tests. Patch from
dr AT vasco.com
20101007
- (djm) [ssh-agent.c] Fix type for curve name.
- (djm) OpenBSD CVS Sync
- matthew@cvs.openbsd.org 2010/09/24 13:33:00
[misc.c misc.h configure.ac openbsd-compat/openbsd-compat.h]
[openbsd-compat/timingsafe_bcmp.c]
Add timingsafe_bcmp(3) to libc, mention that it's already in the
kernel in kern(9), and remove it from OpenSSH.
ok deraadt@, djm@
NB. re-added under openbsd-compat/ for portable OpenSSH
- djm@cvs.openbsd.org 2010/09/25 09:30:16
[sftp.c configure.ac openbsd-compat/glob.c openbsd-compat/glob.h]
make use of new glob(3) GLOB_KEEPSTAT extension to save extra server
rountrips to fetch per-file stat(2) information.
NB. update openbsd-compat/ glob(3) implementation from OpenBSD libc to
match.
- djm@cvs.openbsd.org 2010/09/26 22:26:33
[sftp.c]
when performing an "ls" in columnated (short) mode, only call
ioctl(TIOCGWINSZ) once to get the window width instead of per-
filename
- djm@cvs.openbsd.org 2010/09/30 11:04:51
[servconf.c]
prevent free() of string in .rodata when overriding AuthorizedKeys in
a Match block; patch from rein AT basefarm.no
- djm@cvs.openbsd.org 2010/10/01 23:05:32
[cipher-3des1.c cipher-bf1.c cipher-ctr.c openbsd-compat/openssl-compat.h]
adapt to API changes in openssl-1.0.0a
NB. contains compat code to select correct API for older OpenSSL
- djm@cvs.openbsd.org 2010/10/05 05:13:18
[sftp.c sshconnect.c]
use default shell /bin/sh if $SHELL is ""; ok markus@
- djm@cvs.openbsd.org 2010/10/06 06:39:28
[clientloop.c ssh.c sshconnect.c sshconnect.h]
kill proxy command on fatal() (we already kill it on clean exit);
ok markus@
- djm@cvs.openbsd.org 2010/10/06 21:10:21
[sshconnect.c]
swapped args to kill(2)
- (djm) [openbsd-compat/glob.c] restore ARG_MAX compat code.
- (djm) [cipher-acss.c] Add missing header.
- (djm) [openbsd-compat/Makefile.in] Actually link timingsafe_bcmp
20100924
- (djm) OpenBSD CVS Sync
- naddy@cvs.openbsd.org 2010/09/10 15:19:29
[ssh-keygen.1]
* mention ECDSA in more places
* less repetition in FILES section
* SSHv1 keys are still encrypted with 3DES
help and ok jmc@
- djm@cvs.openbsd.org 2010/09/11 21:44:20
[ssh.1]
mention RFC 5656 for ECC stuff
- jmc@cvs.openbsd.org 2010/09/19 21:30:05
[sftp.1]
more wacky macro fixing;
- djm@cvs.openbsd.org 2010/09/20 04:41:47
[ssh.c]
install a SIGCHLD handler to reap expiried child process; ok markus@
- djm@cvs.openbsd.org 2010/09/20 04:50:53
[jpake.c schnorr.c]
check that received values are smaller than the group size in the
disabled and unfinished J-PAKE code.
avoids catastrophic security failure found by Sebastien Martini
- djm@cvs.openbsd.org 2010/09/20 04:54:07
[jpake.c]
missing #include
- djm@cvs.openbsd.org 2010/09/20 07:19:27
[mux.c]
"atomically" create the listening mux socket by binding it on a temorary
name and then linking it into position after listen() has succeeded.
this allows the mux clients to determine that the server socket is
either ready or stale without races. stale server sockets are now
automatically removed
ok deraadt
- djm@cvs.openbsd.org 2010/09/22 05:01:30
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
- jmc@cvs.openbsd.org 2010/09/22 08:30:08
[ssh.1 ssh_config.5]
ssh.1: add kexalgorithms to the -o list
ssh_config.5: format the kexalgorithms in a more consistent
(prettier!) way
ok djm
- djm@cvs.openbsd.org 2010/09/22 22:58:51
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
- jmc@cvs.openbsd.org 2010/09/23 13:34:43
[sftp.c]
add [-l limit] to usage();
- jmc@cvs.openbsd.org 2010/09/23 13:36:46
[scp.1 sftp.1]
add KexAlgorithms to the -o list;
20100910
- (dtucker) [openbsd-compat/port-linux.c] Check is_selinux_enabled for exact
return code since it can apparently return -1 under some conditions. From
openssh bugs werbittewas de, ok djm@
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/08/31 12:33:38
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
reintroduce commit from tedu@, which I pulled out for release
engineering:
OpenSSL_add_all_algorithms is the name of the function we have a
man page for, so use that. ok djm
- jmc@cvs.openbsd.org 2010/08/31 17:40:54
[ssh-agent.1]
fix some macro abuse;
- jmc@cvs.openbsd.org 2010/08/31 21:14:58
[ssh.1]
small text tweak to accommodate previous;
- naddy@cvs.openbsd.org 2010/09/01 15:21:35
[servconf.c]
pick up ECDSA host key by default; ok djm@
- markus@cvs.openbsd.org 2010/09/02 16:07:25
[ssh-keygen.c]
permit -b 256, 384 or 521 as key size for ECDSA; ok djm@
- markus@cvs.openbsd.org 2010/09/02 16:08:39
[ssh.c]
unbreak ControlPersist=yes for ControlMaster=yes; ok djm@
- naddy@cvs.openbsd.org 2010/09/02 17:21:50
[ssh-keygen.c]
Switch ECDSA default key size to 256 bits, which according to RFC5656
should still be better than our current RSA-2048 default.
ok djm@, markus@
- jmc@cvs.openbsd.org 2010/09/03 11:09:29
[scp.1]
add an EXIT STATUS section for /usr/bin;
- jmc@cvs.openbsd.org 2010/09/04 09:38:34
[ssh-add.1 ssh.1]
two more EXIT STATUS sections;
- naddy@cvs.openbsd.org 2010/09/06 17:10:19
[sshd_config]
add ssh_host_ecdsa_key to /etc; from Mattieu Baptiste
<mattieu.b@gmail.com>
ok deraadt@
- djm@cvs.openbsd.org 2010/09/08 03:54:36
[authfile.c]
typo
- deraadt@cvs.openbsd.org 2010/09/08 04:13:31
[compress.c]
work around name-space collisions some buggy compilers (looking at you
gcc, at least in earlier versions, but this does not forgive your current
transgressions) seen between zlib and openssl
ok djm
- djm@cvs.openbsd.org 2010/09/09 10:45:45
[kex.c kex.h kexecdh.c key.c key.h monitor.c ssh-ecdsa.c]
ECDH/ECDSA compliance fix: these methods vary the hash function they use
(SHA256/384/512) depending on the length of the curve in use. The previous
code incorrectly used SHA256 in all cases.
This fix will cause authentication failure when using 384 or 521-bit curve
keys if one peer hasn't been upgraded and the other has. (256-bit curve
keys work ok). In particular you may need to specify HostkeyAlgorithms
when connecting to a server that has not been upgraded from an upgraded
client.
ok naddy@
- (djm) [authfd.c authfile.c bufec.c buffer.h configure.ac kex.h kexecdh.c]
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
[ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
platforms that don't have the requisite OpenSSL support. ok dtucker@
- (dtucker) [kex.h key.c packet.h ssh-agent.c ssh.c] A few more ECC ifdefs
for missing headers and compiler warnings.
20100831
- OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2010/08/08 19:36:30
[ssh-keysign.8 ssh.1 sshd.8]
use the same template for all FILES sections; i.e. -compact/.Pp where we
have multiple items, and .Pa for path names;
- tedu@cvs.openbsd.org 2010/08/12 23:34:39
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
OpenSSL_add_all_algorithms is the name of the function we have a man page
for, so use that. ok djm
- djm@cvs.openbsd.org 2010/08/16 04:06:06
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
backout previous temporarily; discussed with deraadt@
- djm@cvs.openbsd.org 2010/08/31 09:58:37
[auth-options.c auth1.c auth2.c bufaux.c buffer.h kex.c key.c packet.c]
[packet.h ssh-dss.c ssh-rsa.c]
Add buffer_get_cstring() and related functions that verify that the
string extracted from the buffer contains no embedded \0 characters*
This prevents random (possibly malicious) crap from being appended to
strings where it would not be noticed if the string is used with
a string(3) function.
Use the new API in a few sensitive places.
* actually, we allow a single one at the end of the string for now because
we don't know how many deployed implementations get this wrong, but don't
count on this to remain indefinitely.
- djm@cvs.openbsd.org 2010/08/31 11:54:45
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
- (djm) [Makefile.in] Add new ECC files
- (djm) [bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c] include
includes.h
20100827
- (dtucker) [contrib/redhat/sshd.init] Bug #1810: initlog is deprecated,
remove. Patch from martynas at venck us
20100823
- (djm) Release OpenSSH-5.6p1
20100816
- (dtucker) [configure.ac openbsd-compat/Makefile.in
openbsd-compat/openbsd-compat.h openbsd-compat/strptime.c] Add strptime to
the compat library which helps on platforms like old IRIX. Based on work
by djm, tested by Tom Christensen.
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/08/12 21:49:44
[ssh.c]
close any extra file descriptors inherited from parent at start and
reopen stdin/stdout to /dev/null when forking for ControlPersist.
prevents tools that fork and run a captive ssh for communication from
failing to exit when the ssh completes while they wait for these fds to
close. The inherited fds may persist arbitrarily long if a background
mux master has been started by ControlPersist. cvs and scp were effected
by this.
"please commit" markus@
- (djm) [regress/README.regress] typo
20100812
- (tim) [regress/login-timeout.sh regress/reconfigure.sh regress/reexec.sh
regress/test-exec.sh] Under certain conditions when testing with sudo
tests would fail because the pidfile could not be read by a regular user.
"cat: cannot open ...../regress/pidfile: Permission denied (error 13)"
Make sure cat is run by $SUDO. no objection from me. djm@
- (tim) [auth.c] add cast to quiet compiler. Change only affects SVR5 systems.
20100809
- (djm) bz#1561: don't bother setting IFF_UP on tun(4) device if it is
already set. Makes FreeBSD user openable tunnels useful; patch from
richard.burakowski+ossh AT mrburak.net, ok dtucker@
- (dtucker) bug #1530: strip trailing ":" from hostname in ssh-copy-id.
based in part on a patch from Colin Watson, ok djm@
20100809
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/08/08 16:26:42
[version.h]
crank to 5.6
- (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
[contrib/suse/openssh.spec] Crank version numbers
20100805
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/08/04 05:37:01
[ssh.1 ssh_config.5 sshd.8]
Remove mentions of weird "addr/port" alternate address format for IPv6
addresses combinations. It hasn't worked for ages and we have supported
the more commen "[addr]:port" format for a long time. ok jmc@ markus@
- djm@cvs.openbsd.org 2010/08/04 05:40:39
[PROTOCOL.certkeys ssh-keygen.c]
tighten the rules for certificate encoding by requiring that options
appear in lexical order and make our ssh-keygen comply. ok markus@
- djm@cvs.openbsd.org 2010/08/04 05:42:47
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8]
[ssh-keysign.c ssh.c]
enable certificates for hostbased authentication, from Iain Morgan;
"looks ok" markus@
- djm@cvs.openbsd.org 2010/08/04 05:49:22
[authfile.c]
commited the wrong version of the hostbased certificate diff; this
version replaces some strlc{py,at} verbosity with xasprintf() at
the request of markus@
- djm@cvs.openbsd.org 2010/08/04 06:07:11
[ssh-keygen.1 ssh-keygen.c]
Support CA keys in PKCS#11 tokens; feedback and ok markus@
- djm@cvs.openbsd.org 2010/08/04 06:08:40
[ssh-keysign.c]
clean for -Wuninitialized (Id sync only; portable had this change)
- djm@cvs.openbsd.org 2010/08/05 13:08:42
[channels.c]
Fix a trio of bugs in the local/remote window calculation for datagram
data channels (i.e. TunnelForward):
Calculate local_consumed correctly in channel_handle_wfd() by measuring
the delta to buffer_len(c->output) from when we start to when we finish.
The proximal problem here is that the output_filter we use in portable
modified the length of the dequeued datagram (to futz with the headers
for !OpenBSD).
In channel_output_poll(), don't enqueue datagrams that won't fit in the
peer's advertised packet size (highly unlikely to ever occur) or which
won't fit in the peer's remaining window (more likely).
In channel_input_data(), account for the 4-byte string header in
datagram packets that we accept from the peer and enqueue in c->output.
report, analysis and testing 2/3 cases from wierbows AT us.ibm.com;
"looks good" markus@
20100803
- (dtucker) [monitor.c] Bug #1795: Initialize the values to be returned from
PAM to sane values in case the PAM method doesn't write to them. Spotted by
Bitman Zhou, ok djm@.
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/07/16 04:45:30
[ssh-keygen.c]
avoid bogus compiler warning
- djm@cvs.openbsd.org 2010/07/16 14:07:35
[ssh-rsa.c]
more timing paranoia - compare all parts of the expected decrypted
data before returning. AFAIK not exploitable in the SSH protocol.
"groovy" deraadt@
- djm@cvs.openbsd.org 2010/07/19 03:16:33
[sftp-client.c]
bz#1797: fix swapped args in upload_dir_internal(), breaking recursive
upload depth checks and causing verbose printing of transfers to always
be turned on; patch from imorgan AT nas.nasa.gov
- djm@cvs.openbsd.org 2010/07/19 09:15:12
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
- djm@cvs.openbsd.org 2010/07/21 02:10:58
[misc.c]
sync timingsafe_bcmp() with the one dempsky@ committed to sys/lib/libkern
- dtucker@cvs.openbsd.org 2010/07/23 08:49:25
[ssh.1]
Ciphers is documented in ssh_config(5) these days
20100819
- (dtucker) [contrib/ssh-copy-ud.1] Bug #1786: update ssh-copy-id.1 with more
details about its behaviour WRT existing directories. Patch from
asguthrie at gmail com, ok djm.
20100716
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/07/02 04:32:44
[misc.c]
unbreak strdelim() skipping past quoted strings, e.g.
AllowUsers "blah blah" blah
was broken; report and fix in bz#1757 from bitman.zhou AT centrify.com
ok dtucker;
- djm@cvs.openbsd.org 2010/07/12 22:38:52
[ssh.c]
Make ExitOnForwardFailure work with fork-after-authentication ("ssh -f")
for protocol 2. ok markus@
- djm@cvs.openbsd.org 2010/07/12 22:41:13
[ssh.c ssh_config.5]
expand %h to the hostname in ssh_config Hostname options. While this
sounds useless, it is actually handy for working with unqualified
hostnames:
Host *.*
Hostname %h
Host *
Hostname %h.example.org
"I like it" markus@
- djm@cvs.openbsd.org 2010/07/13 11:52:06
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c]
[packet.c ssh-rsa.c]
implement a timing_safe_cmp() function to compare memory without leaking
timing information by short-circuiting like memcmp() and use it for
some of the more sensitive comparisons (though nothing high-value was
readily attackable anyway); "looks ok" markus@
- djm@cvs.openbsd.org 2010/07/13 23:13:16
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c packet.c]
[ssh-rsa.c]
s/timing_safe_cmp/timingsafe_bcmp/g
- jmc@cvs.openbsd.org 2010/07/14 17:06:58
[ssh.1]
finally ssh synopsis looks nice again! this commit just removes a ton of
hacks we had in place to make it work with old groff;
- schwarze@cvs.openbsd.org 2010/07/15 21:20:38
[ssh-keygen.1]
repair incorrect block nesting, which screwed up indentation;
problem reported and fix OK by jmc@
20100714
- (tim) [contrib/redhat/openssh.spec] Bug 1796: Test for skip_x11_askpass
(line 77) should have been for no_x11_askpass.
20100702
- (djm) OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2010/06/26 00:57:07
[ssh_config.5]
tweak previous;
- djm@cvs.openbsd.org 2010/06/26 23:04:04
[ssh.c]
oops, forgot to #include <canohost.h>; spotted and patch from chl@
- djm@cvs.openbsd.org 2010/06/29 23:15:30
[ssh-keygen.1 ssh-keygen.c]
allow import (-i) and export (-e) of PEM and PKCS#8 encoded keys;
bz#1749; ok markus@
- djm@cvs.openbsd.org 2010/06/29 23:16:46
[auth2-pubkey.c sshd_config.5]
allow key options (command="..." and friends) in AuthorizedPrincipals;
ok markus@
- jmc@cvs.openbsd.org 2010/06/30 07:24:25
[ssh-keygen.1]
tweak previous;
- jmc@cvs.openbsd.org 2010/06/30 07:26:03
[ssh-keygen.c]
sort usage();
- jmc@cvs.openbsd.org 2010/06/30 07:28:34
[sshd_config.5]
tweak previous;
- millert@cvs.openbsd.org 2010/07/01 13:06:59
[scp.c]
Fix a longstanding problem where if you suspend scp at the
password/passphrase prompt the terminal mode is not restored.
OK djm@
- phessler@cvs.openbsd.org 2010/06/27 19:19:56
[regress/Makefile]
fix how we run the tests so we can successfully use SUDO='sudo -E'
in our env
- djm@cvs.openbsd.org 2010/06/29 23:59:54
[cert-userkey.sh]
regress tests for key options in AuthorizedPrincipals
20100627
- (tim) [openbsd-compat/port-uw.c] Reorder includes. auth-options.h now needs
key.h.
20100626
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/05/21 05:00:36
[misc.c]
colon() returns char*, so s/return (0)/return NULL/
- markus@cvs.openbsd.org 2010/06/08 21:32:19
[ssh-pkcs11.c]
check length of value returned C_GetAttributValue for != 0
from mdrtbugzilla@codefive.co.uk; bugzilla #1773; ok dtucker@
- djm@cvs.openbsd.org 2010/06/17 07:07:30
[mux.c]
Correct sizing of object to be allocated by calloc(), replacing
sizeof(state) with sizeof(*state). This worked by accident since
the struct contained a single int at present, but could have broken
in the future. patch from hyc AT symas.com
- djm@cvs.openbsd.org 2010/06/18 00:58:39
[sftp.c]
unbreak ls in working directories that contains globbing characters in
their pathnames. bz#1655 reported by vgiffin AT apple.com
- djm@cvs.openbsd.org 2010/06/18 03:16:03
[session.c]
Missing check for chroot_director == "none" (we already checked against
NULL); bz#1564 from Jan.Pechanec AT Sun.COM
- djm@cvs.openbsd.org 2010/06/18 04:43:08
[sftp-client.c]
fix memory leak in do_realpath() error path; bz#1771, patch from
anicka AT suse.cz
- djm@cvs.openbsd.org 2010/06/22 04:22:59
[servconf.c sshd_config.5]
expose some more sshd_config options inside Match blocks:
AuthorizedKeysFile AuthorizedPrincipalsFile
HostbasedUsesNameFromPacketOnly PermitTunnel
bz#1764; feedback from imorgan AT nas.nasa.gov; ok dtucker@
- djm@cvs.openbsd.org 2010/06/22 04:32:06
[ssh-keygen.c]
standardise error messages when attempting to open private key
files to include "progname: filename: error reason"
bz#1783; ok dtucker@
- djm@cvs.openbsd.org 2010/06/22 04:49:47
[auth.c]
queue auth debug messages for bad ownership or permissions on the user's
keyfiles. These messages will be sent after the user has successfully
authenticated (where our client will display them with LogLevel=debug).
bz#1554; ok dtucker@
- djm@cvs.openbsd.org 2010/06/22 04:54:30
[ssh-keyscan.c]
replace verbose and overflow-prone Linebuf code with read_keyfile_line()
based on patch from joachim AT joachimschipper.nl; bz#1565; ok dtucker@
- djm@cvs.openbsd.org 2010/06/22 04:59:12
[session.c]
include the user name on "subsystem request for ..." log messages;
bz#1571; ok dtucker@
- djm@cvs.openbsd.org 2010/06/23 02:59:02
[ssh-keygen.c]
fix printing of extensions in v01 certificates that I broke in r1.190
- djm@cvs.openbsd.org 2010/06/25 07:14:46
[channels.c mux.c readconf.c readconf.h ssh.h]
bz#1327: remove hardcoded limit of 100 permitopen clauses and port
forwards per direction; ok markus@ stevesk@
- djm@cvs.openbsd.org 2010/06/25 07:20:04
[channels.c session.c]
bz#1750: fix requirement for /dev/null inside ChrootDirectory for
internal-sftp accidentally introduced in r1.253 by removing the code
that opens and dup /dev/null to stderr and modifying the channels code
to read stderr but discard it instead; ok markus@
- djm@cvs.openbsd.org 2010/06/25 08:46:17
[auth1.c auth2-none.c]
skip the initial check for access with an empty password when
PermitEmptyPasswords=no; bz#1638; ok markus@
- djm@cvs.openbsd.org 2010/06/25 23:10:30
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
- djm@cvs.openbsd.org 2010/06/25 23:10:30
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
20100622
- (djm) [loginrec.c] crank LINFO_NAMESIZE (username length) to 512
bz#1579; ok dtucker
20100618
- (djm) [contrib/ssh-copy-id] Update key file explicitly under ~
rather than assuming that $CWD == $HOME. bz#1500, patch from
timothy AT gelter.com
20100617
- (tim) [contrib/cygwin/README] Remove a reference to the obsolete
minires-devel package, and to add the reference to the libedit-devel
package since CYgwin now provides libedit. Patch from Corinna Vinschen.
20100521
- (djm) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/05/07 11:31:26
[regress/Makefile regress/cert-userkey.sh]
regress tests for AuthorizedPrincipalsFile and "principals=" key option.
feedback and ok markus@
- djm@cvs.openbsd.org 2010/05/11 02:58:04
[auth-rsa.c]
don't accept certificates marked as "cert-authority" here; ok markus@
- djm@cvs.openbsd.org 2010/05/14 00:47:22
[ssh-add.c]
check that the certificate matches the corresponding private key before
grafting it on
- djm@cvs.openbsd.org 2010/05/14 23:29:23
[channels.c channels.h mux.c ssh.c]
Pause the mux channel while waiting for reply from aynch callbacks.
Prevents misordering of replies if new requests arrive while waiting.
Extend channel open confirm callback to allow signalling failure
conditions as well as success. Use this to 1) fix a memory leak, 2)
start using the above pause mechanism and 3) delay sending a success/
failure message on mux slave session open until we receive a reply from
the server.
motivated by and with feedback from markus@
- markus@cvs.openbsd.org 2010/05/16 12:55:51
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
mux support for remote forwarding with dynamic port allocation,
use with
LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
feedback and ok djm@
- djm@cvs.openbsd.org 2010/05/20 11:25:26
[auth2-pubkey.c]
fix logspam when key options (from="..." especially) deny non-matching
keys; reported by henning@ also bz#1765; ok markus@ dtucker@
- djm@cvs.openbsd.org 2010/05/20 23:46:02
[PROTOCOL.certkeys auth-options.c ssh-keygen.c]
Move the permit-* options to the non-critical "extensions" field for v01
certificates. The logic is that if another implementation fails to
implement them then the connection just loses features rather than fails
outright.
ok markus@
20100511
- (dtucker) [Makefile.in] Bug #1770: Link libopenbsd-compat twice to solve
circular dependency problem on old or odd platforms. From Tom Lane, ok
djm@.
- (djm) [openbsd-compat/openssl-compat.h] Fix build breakage on older
libcrypto by defining OPENSSL_[DR]SA_MAX_MODULUS_BITS if they aren't
already. ok dtucker@
20100510
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/04/23 01:47:41
[ssh-keygen.c]
bz#1740: display a more helpful error message when $HOME is
inaccessible while trying to create .ssh directory. Based on patch
from jchadima AT redhat.com; ok dtucker@
- djm@cvs.openbsd.org 2010/04/23 22:27:38
[mux.c]
set "detach_close" flag when registering channel cleanup callbacks.
This causes the channel to close normally when its fds close and
hangs when terminating a mux slave using ~. bz#1758; ok markus@
- djm@cvs.openbsd.org 2010/04/23 22:42:05
[session.c]
set stderr to /dev/null for subsystems rather than just closing it.
avoids hangs if a subsystem or shell initialisation writes to stderr.
bz#1750; ok markus@
- djm@cvs.openbsd.org 2010/04/23 22:48:31
[ssh-keygen.c]
refuse to generate keys longer than OPENSSL_[RD]SA_MAX_MODULUS_BITS,
since we would refuse to use them anyway. bz#1516; ok dtucker@
- djm@cvs.openbsd.org 2010/04/26 22:28:24
[sshconnect2.c]
bz#1502: authctxt.success is declared as an int, but passed by
reference to function that accepts sig_atomic_t*. Convert it to
the latter; ok markus@ dtucker@
- djm@cvs.openbsd.org 2010/05/01 02:50:50
[PROTOCOL.certkeys]
typo; jmeltzer@
- dtucker@cvs.openbsd.org 2010/05/05 04:22:09
[sftp.c]
restore mput and mget which got lost in the tab-completion changes.
found by Kenneth Whitaker, ok djm@
- djm@cvs.openbsd.org 2010/05/07 11:30:30
[auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c]
[key.c servconf.c servconf.h sshd.8 sshd_config.5]
add some optional indirection to matching of principal names listed
in certificates. Currently, a certificate must include the a user's name
to be accepted for authentication. This change adds the ability to
specify a list of certificate principal names that are acceptable.
When authenticating using a CA trusted through ~/.ssh/authorized_keys,
this adds a new principals="name1[,name2,...]" key option.
For CAs listed through sshd_config's TrustedCAKeys option, a new config
option "AuthorizedPrincipalsFile" specifies a per-user file containing
the list of acceptable names.
If either option is absent, the current behaviour of requiring the
username to appear in principals continues to apply.
These options are useful for role accounts, disjoint account namespaces
and "user@realm"-style naming policies in certificates.
feedback and ok markus@
- jmc@cvs.openbsd.org 2010/05/07 12:49:17
[sshd_config.5]
tweak previous;
20100423
- (dtucker) [configure.ac] Bug #1756: Check for the existence of a lib64 dir
in the openssl install directory (some newer openssl versions do this on at
least some amd64 platforms).
20100418
- OpenBSD CVS Sync
- jmc@cvs.openbsd.org 2010/04/16 06:45:01
[ssh_config.5]
tweak previous; ok djm
- jmc@cvs.openbsd.org 2010/04/16 06:47:04
[ssh-keygen.1 ssh-keygen.c]
tweak previous; ok djm
- djm@cvs.openbsd.org 2010/04/16 21:14:27
[sshconnect.c]
oops, %r => remote username, not %u
- djm@cvs.openbsd.org 2010/04/16 01:58:45
[regress/cert-hostkey.sh regress/cert-userkey.sh]
regression tests for v01 certificate format
includes interop tests for v00 certs
- (dtucker) [contrib/aix/buildbff.sh] Fix creation of ssh_prng_cmds.default
file.
20100416
- (djm) Release openssh-5.5p1
- OpenBSD CVS Sync
- djm@cvs.openbsd.org 2010/03/26 03:13:17
[bufaux.c]
allow buffer_get_int_ret/buffer_get_int64_ret to take a NULL pointer
argument to allow skipping past values in a buffer
- jmc@cvs.openbsd.org 2010/03/26 06:54:36
[ssh.1]
tweak previous;
- jmc@cvs.openbsd.org 2010/03/27 14:26:55
[ssh_config.5]
tweak previous; ok dtucker
- djm@cvs.openbsd.org 2010/04/10 00:00:16
[ssh.c]
bz#1746 - suppress spurious tty warning when using -O and stdin
is not a tty; ok dtucker@ markus@
- djm@cvs.openbsd.org 2010/04/10 00:04:30
[sshconnect.c]
fix terminology: we didn't find a certificate in known_hosts, we found
a CA key
- djm@cvs.openbsd.org 2010/04/10 02:08:44
[clientloop.c]
bz#1698: kill channel when pty allocation requests fail. Fixed
stuck client if the server refuses pty allocation.
ok dtucker@ "think so" markus@
- djm@cvs.openbsd.org 2010/04/10 02:10:56
[sshconnect2.c]
show the key type that we are offering in debug(), helps distinguish
between certs and plain keys as the path to the private key is usually
the same.
- djm@cvs.openbsd.org 2010/04/10 05:48:16
[mux.c]
fix NULL dereference; from matthew.haub AT alumni.adelaide.edu.au
- djm@cvs.openbsd.org 2010/04/14 22:27:42
[ssh_config.5 sshconnect.c]
expand %r => remote username in ssh_config:ProxyCommand;
ok deraadt markus
- markus@cvs.openbsd.org 2010/04/15 20:32:55
[ssh-pkcs11.c]
retry lookup for private key if there's no matching key with CKA_SIGN
attribute enabled; this fixes fixes MuscleCard support (bugzilla #1736)
ok djm@
- djm@cvs.openbsd.org 2010/04/16 01:47:26
[PROTOCOL.certkeys auth-options.c auth-options.h auth-rsa.c]
[auth2-pubkey.c authfd.c key.c key.h myproposal.h ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.1 ssh-keygen.c ssh-rsa.c]
[sshconnect.c sshconnect2.c sshd.c]
revised certificate format ssh-{dss,rsa}-cert-v01@openssh.com with the
following changes:
move the nonce field to the beginning of the certificate where it can
better protect against chosen-prefix attacks on the signature hash
Rename "constraints" field to "critical options"
Add a new non-critical "extensions" field
Add a serial number
The older format is still support for authentication and cert generation
(use "ssh-keygen -t v00 -s ca_key ..." to generate a v00 certificate)
ok markus@
Reference in New Issue View Git Blame Copy Permalink