openssh/servconf.c
Ben Lindstrom fb62a69488 - markus@cvs.openbsd.org 2002/05/15 21:56:38
[servconf.c sshd.8 sshd_config]
     re-enable privsep and disable setuid for post-3.2.2
2002-06-06 19:47:11 +00:00

928 lines
27 KiB
C

/*
* Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
* All rights reserved
*
* As far as I am concerned, the code I have written for this software
* can be used freely for any purpose. Any derived versions of this
* software must be clearly marked as such, and if the derived work is
* incompatible with the protocol description in the RFC file, it must be
* called by a name other than "ssh" or "Secure Shell".
*/
#include "includes.h"
RCSID("$OpenBSD: servconf.c,v 1.110 2002/05/15 21:56:38 markus Exp $");
#if defined(KRB4)
#include <krb.h>
#endif
#if defined(KRB5)
#ifdef HEIMDAL
#include <krb.h>
#else
/* Bodge - but then, so is using the kerberos IV KEYFILE to get a Kerberos V
* keytab */
#define KEYFILE "/etc/krb5.keytab"
#endif
#endif
#ifdef AFS
#include <kafs.h>
#endif
#include "ssh.h"
#include "log.h"
#include "servconf.h"
#include "xmalloc.h"
#include "compat.h"
#include "pathnames.h"
#include "tildexpand.h"
#include "misc.h"
#include "cipher.h"
#include "kex.h"
#include "mac.h"
static void add_listen_addr(ServerOptions *, char *, u_short);
static void add_one_listen_addr(ServerOptions *, char *, u_short);
/* AF_UNSPEC or AF_INET or AF_INET6 */
extern int IPv4or6;
/* Use of privilege separation or not */
extern int use_privsep;
/* Initializes the server options to their default values. */
void
initialize_server_options(ServerOptions *options)
{
memset(options, 0, sizeof(*options));
/* Portable-specific options */
options->pam_authentication_via_kbd_int = -1;
/* Standard Options */
options->num_ports = 0;
options->ports_from_cmdline = 0;
options->listen_addrs = NULL;
options->num_host_key_files = 0;
options->pid_file = NULL;
options->server_key_bits = -1;
options->login_grace_time = -1;
options->key_regeneration_time = -1;
options->permit_root_login = PERMIT_NOT_SET;
options->ignore_rhosts = -1;
options->ignore_user_known_hosts = -1;
options->print_motd = -1;
options->print_lastlog = -1;
options->x11_forwarding = -1;
options->x11_display_offset = -1;
options->x11_use_localhost = -1;
options->xauth_location = NULL;
options->strict_modes = -1;
options->keepalives = -1;
options->log_facility = SYSLOG_FACILITY_NOT_SET;
options->log_level = SYSLOG_LEVEL_NOT_SET;
options->rhosts_authentication = -1;
options->rhosts_rsa_authentication = -1;
options->hostbased_authentication = -1;
options->hostbased_uses_name_from_packet_only = -1;
options->rsa_authentication = -1;
options->pubkey_authentication = -1;
#if defined(KRB4) || defined(KRB5)
options->kerberos_authentication = -1;
options->kerberos_or_local_passwd = -1;
options->kerberos_ticket_cleanup = -1;
#endif
#if defined(AFS) || defined(KRB5)
options->kerberos_tgt_passing = -1;
#endif
#ifdef AFS
options->afs_token_passing = -1;
#endif
options->password_authentication = -1;
options->kbd_interactive_authentication = -1;
options->challenge_response_authentication = -1;
options->permit_empty_passwd = -1;
options->use_login = -1;
options->allow_tcp_forwarding = -1;
options->num_allow_users = 0;
options->num_deny_users = 0;
options->num_allow_groups = 0;
options->num_deny_groups = 0;
options->ciphers = NULL;
options->macs = NULL;
options->protocol = SSH_PROTO_UNKNOWN;
options->gateway_ports = -1;
options->num_subsystems = 0;
options->max_startups_begin = -1;
options->max_startups_rate = -1;
options->max_startups = -1;
options->banner = NULL;
options->verify_reverse_mapping = -1;
options->client_alive_interval = -1;
options->client_alive_count_max = -1;
options->authorized_keys_file = NULL;
options->authorized_keys_file2 = NULL;
/* Needs to be accessable in many places */
use_privsep = -1;
}
void
fill_default_server_options(ServerOptions *options)
{
/* Portable-specific options */
if (options->pam_authentication_via_kbd_int == -1)
options->pam_authentication_via_kbd_int = 0;
/* Standard Options */
if (options->protocol == SSH_PROTO_UNKNOWN)
options->protocol = SSH_PROTO_1|SSH_PROTO_2;
if (options->num_host_key_files == 0) {
/* fill default hostkeys for protocols */
if (options->protocol & SSH_PROTO_1)
options->host_key_files[options->num_host_key_files++] =
_PATH_HOST_KEY_FILE;
if (options->protocol & SSH_PROTO_2) {
options->host_key_files[options->num_host_key_files++] =
_PATH_HOST_RSA_KEY_FILE;
options->host_key_files[options->num_host_key_files++] =
_PATH_HOST_DSA_KEY_FILE;
}
}
if (options->num_ports == 0)
options->ports[options->num_ports++] = SSH_DEFAULT_PORT;
if (options->listen_addrs == NULL)
add_listen_addr(options, NULL, 0);
if (options->pid_file == NULL)
options->pid_file = _PATH_SSH_DAEMON_PID_FILE;
if (options->server_key_bits == -1)
options->server_key_bits = 768;
if (options->login_grace_time == -1)
options->login_grace_time = 600;
if (options->key_regeneration_time == -1)
options->key_regeneration_time = 3600;
if (options->permit_root_login == PERMIT_NOT_SET)
options->permit_root_login = PERMIT_YES;
if (options->ignore_rhosts == -1)
options->ignore_rhosts = 1;
if (options->ignore_user_known_hosts == -1)
options->ignore_user_known_hosts = 0;
if (options->print_motd == -1)
options->print_motd = 1;
if (options->print_lastlog == -1)
options->print_lastlog = 1;
if (options->x11_forwarding == -1)
options->x11_forwarding = 0;
if (options->x11_display_offset == -1)
options->x11_display_offset = 10;
if (options->x11_use_localhost == -1)
options->x11_use_localhost = 1;
if (options->xauth_location == NULL)
options->xauth_location = _PATH_XAUTH;
if (options->strict_modes == -1)
options->strict_modes = 1;
if (options->keepalives == -1)
options->keepalives = 1;
if (options->log_facility == SYSLOG_FACILITY_NOT_SET)
options->log_facility = SYSLOG_FACILITY_AUTH;
if (options->log_level == SYSLOG_LEVEL_NOT_SET)
options->log_level = SYSLOG_LEVEL_INFO;
if (options->rhosts_authentication == -1)
options->rhosts_authentication = 0;
if (options->rhosts_rsa_authentication == -1)
options->rhosts_rsa_authentication = 0;
if (options->hostbased_authentication == -1)
options->hostbased_authentication = 0;
if (options->hostbased_uses_name_from_packet_only == -1)
options->hostbased_uses_name_from_packet_only = 0;
if (options->rsa_authentication == -1)
options->rsa_authentication = 1;
if (options->pubkey_authentication == -1)
options->pubkey_authentication = 1;
#if defined(KRB4) || defined(KRB5)
if (options->kerberos_authentication == -1)
options->kerberos_authentication = 0;
if (options->kerberos_or_local_passwd == -1)
options->kerberos_or_local_passwd = 1;
if (options->kerberos_ticket_cleanup == -1)
options->kerberos_ticket_cleanup = 1;
#endif
#if defined(AFS) || defined(KRB5)
if (options->kerberos_tgt_passing == -1)
options->kerberos_tgt_passing = 0;
#endif
#ifdef AFS
if (options->afs_token_passing == -1)
options->afs_token_passing = 0;
#endif
if (options->password_authentication == -1)
options->password_authentication = 1;
if (options->kbd_interactive_authentication == -1)
options->kbd_interactive_authentication = 0;
if (options->challenge_response_authentication == -1)
options->challenge_response_authentication = 1;
if (options->permit_empty_passwd == -1)
options->permit_empty_passwd = 0;
if (options->use_login == -1)
options->use_login = 0;
if (options->allow_tcp_forwarding == -1)
options->allow_tcp_forwarding = 1;
if (options->gateway_ports == -1)
options->gateway_ports = 0;
if (options->max_startups == -1)
options->max_startups = 10;
if (options->max_startups_rate == -1)
options->max_startups_rate = 100; /* 100% */
if (options->max_startups_begin == -1)
options->max_startups_begin = options->max_startups;
if (options->verify_reverse_mapping == -1)
options->verify_reverse_mapping = 0;
if (options->client_alive_interval == -1)
options->client_alive_interval = 0;
if (options->client_alive_count_max == -1)
options->client_alive_count_max = 3;
if (options->authorized_keys_file2 == NULL) {
/* authorized_keys_file2 falls back to authorized_keys_file */
if (options->authorized_keys_file != NULL)
options->authorized_keys_file2 = options->authorized_keys_file;
else
options->authorized_keys_file2 = _PATH_SSH_USER_PERMITTED_KEYS2;
}
if (options->authorized_keys_file == NULL)
options->authorized_keys_file = _PATH_SSH_USER_PERMITTED_KEYS;
/* Turn privilege separation on by default */
if (use_privsep == -1)
use_privsep = 1;
}
/* Keyword tokens. */
typedef enum {
sBadOption, /* == unknown option */
/* Portable-specific options */
sPAMAuthenticationViaKbdInt,
/* Standard Options */
sPort, sHostKeyFile, sServerKeyBits, sLoginGraceTime, sKeyRegenerationTime,
sPermitRootLogin, sLogFacility, sLogLevel,
sRhostsAuthentication, sRhostsRSAAuthentication, sRSAAuthentication,
#if defined(KRB4) || defined(KRB5)
sKerberosAuthentication, sKerberosOrLocalPasswd, sKerberosTicketCleanup,
#endif
#if defined(AFS) || defined(KRB5)
sKerberosTgtPassing,
#endif
#ifdef AFS
sAFSTokenPassing,
#endif
sChallengeResponseAuthentication,
sPasswordAuthentication, sKbdInteractiveAuthentication, sListenAddress,
sPrintMotd, sPrintLastLog, sIgnoreRhosts,
sX11Forwarding, sX11DisplayOffset, sX11UseLocalhost,
sStrictModes, sEmptyPasswd, sKeepAlives,
sUseLogin, sAllowTcpForwarding,
sAllowUsers, sDenyUsers, sAllowGroups, sDenyGroups,
sIgnoreUserKnownHosts, sCiphers, sMacs, sProtocol, sPidFile,
sGatewayPorts, sPubkeyAuthentication, sXAuthLocation, sSubsystem, sMaxStartups,
sBanner, sVerifyReverseMapping, sHostbasedAuthentication,
sHostbasedUsesNameFromPacketOnly, sClientAliveInterval,
sClientAliveCountMax, sAuthorizedKeysFile, sAuthorizedKeysFile2,
sUsePrivilegeSeparation,
sDeprecated
} ServerOpCodes;
/* Textual representation of the tokens. */
static struct {
const char *name;
ServerOpCodes opcode;
} keywords[] = {
/* Portable-specific options */
{ "PAMAuthenticationViaKbdInt", sPAMAuthenticationViaKbdInt },
/* Standard Options */
{ "port", sPort },
{ "hostkey", sHostKeyFile },
{ "hostdsakey", sHostKeyFile }, /* alias */
{ "pidfile", sPidFile },
{ "serverkeybits", sServerKeyBits },
{ "logingracetime", sLoginGraceTime },
{ "keyregenerationinterval", sKeyRegenerationTime },
{ "permitrootlogin", sPermitRootLogin },
{ "syslogfacility", sLogFacility },
{ "loglevel", sLogLevel },
{ "rhostsauthentication", sRhostsAuthentication },
{ "rhostsrsaauthentication", sRhostsRSAAuthentication },
{ "hostbasedauthentication", sHostbasedAuthentication },
{ "hostbasedusesnamefrompacketonly", sHostbasedUsesNameFromPacketOnly },
{ "rsaauthentication", sRSAAuthentication },
{ "pubkeyauthentication", sPubkeyAuthentication },
{ "dsaauthentication", sPubkeyAuthentication }, /* alias */
#if defined(KRB4) || defined(KRB5)
{ "kerberosauthentication", sKerberosAuthentication },
{ "kerberosorlocalpasswd", sKerberosOrLocalPasswd },
{ "kerberosticketcleanup", sKerberosTicketCleanup },
#endif
#if defined(AFS) || defined(KRB5)
{ "kerberostgtpassing", sKerberosTgtPassing },
#endif
#ifdef AFS
{ "afstokenpassing", sAFSTokenPassing },
#endif
{ "passwordauthentication", sPasswordAuthentication },
{ "kbdinteractiveauthentication", sKbdInteractiveAuthentication },
{ "challengeresponseauthentication", sChallengeResponseAuthentication },
{ "skeyauthentication", sChallengeResponseAuthentication }, /* alias */
{ "checkmail", sDeprecated },
{ "listenaddress", sListenAddress },
{ "printmotd", sPrintMotd },
{ "printlastlog", sPrintLastLog },
{ "ignorerhosts", sIgnoreRhosts },
{ "ignoreuserknownhosts", sIgnoreUserKnownHosts },
{ "x11forwarding", sX11Forwarding },
{ "x11displayoffset", sX11DisplayOffset },
{ "x11uselocalhost", sX11UseLocalhost },
{ "xauthlocation", sXAuthLocation },
{ "strictmodes", sStrictModes },
{ "permitemptypasswords", sEmptyPasswd },
{ "uselogin", sUseLogin },
{ "keepalive", sKeepAlives },
{ "allowtcpforwarding", sAllowTcpForwarding },
{ "allowusers", sAllowUsers },
{ "denyusers", sDenyUsers },
{ "allowgroups", sAllowGroups },
{ "denygroups", sDenyGroups },
{ "ciphers", sCiphers },
{ "macs", sMacs },
{ "protocol", sProtocol },
{ "gatewayports", sGatewayPorts },
{ "subsystem", sSubsystem },
{ "maxstartups", sMaxStartups },
{ "banner", sBanner },
{ "verifyreversemapping", sVerifyReverseMapping },
{ "reversemappingcheck", sVerifyReverseMapping },
{ "clientaliveinterval", sClientAliveInterval },
{ "clientalivecountmax", sClientAliveCountMax },
{ "authorizedkeysfile", sAuthorizedKeysFile },
{ "authorizedkeysfile2", sAuthorizedKeysFile2 },
{ "useprivilegeseparation", sUsePrivilegeSeparation},
{ NULL, sBadOption }
};
/*
* Returns the number of the token pointed to by cp or sBadOption.
*/
static ServerOpCodes
parse_token(const char *cp, const char *filename,
int linenum)
{
u_int i;
for (i = 0; keywords[i].name; i++)
if (strcasecmp(cp, keywords[i].name) == 0)
return keywords[i].opcode;
error("%s: line %d: Bad configuration option: %s",
filename, linenum, cp);
return sBadOption;
}
static void
add_listen_addr(ServerOptions *options, char *addr, u_short port)
{
int i;
if (options->num_ports == 0)
options->ports[options->num_ports++] = SSH_DEFAULT_PORT;
if (port == 0)
for (i = 0; i < options->num_ports; i++)
add_one_listen_addr(options, addr, options->ports[i]);
else
add_one_listen_addr(options, addr, port);
}
static void
add_one_listen_addr(ServerOptions *options, char *addr, u_short port)
{
struct addrinfo hints, *ai, *aitop;
char strport[NI_MAXSERV];
int gaierr;
memset(&hints, 0, sizeof(hints));
hints.ai_family = IPv4or6;
hints.ai_socktype = SOCK_STREAM;
hints.ai_flags = (addr == NULL) ? AI_PASSIVE : 0;
snprintf(strport, sizeof strport, "%d", port);
if ((gaierr = getaddrinfo(addr, strport, &hints, &aitop)) != 0)
fatal("bad addr or host: %s (%s)",
addr ? addr : "<NULL>",
gai_strerror(gaierr));
for (ai = aitop; ai->ai_next; ai = ai->ai_next)
;
ai->ai_next = options->listen_addrs;
options->listen_addrs = aitop;
}
int
process_server_config_line(ServerOptions *options, char *line,
const char *filename, int linenum)
{
char *cp, **charptr, *arg, *p;
int *intptr, value;
ServerOpCodes opcode;
int i, n;
cp = line;
arg = strdelim(&cp);
/* Ignore leading whitespace */
if (*arg == '\0')
arg = strdelim(&cp);
if (!arg || !*arg || *arg == '#')
return 0;
intptr = NULL;
charptr = NULL;
opcode = parse_token(arg, filename, linenum);
switch (opcode) {
/* Portable-specific options */
case sPAMAuthenticationViaKbdInt:
intptr = &options->pam_authentication_via_kbd_int;
goto parse_flag;
/* Standard Options */
case sBadOption:
return -1;
case sPort:
/* ignore ports from configfile if cmdline specifies ports */
if (options->ports_from_cmdline)
return 0;
if (options->listen_addrs != NULL)
fatal("%s line %d: ports must be specified before "
"ListenAddress.", filename, linenum);
if (options->num_ports >= MAX_PORTS)
fatal("%s line %d: too many ports.",
filename, linenum);
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing port number.",
filename, linenum);
options->ports[options->num_ports++] = a2port(arg);
if (options->ports[options->num_ports-1] == 0)
fatal("%s line %d: Badly formatted port number.",
filename, linenum);
break;
case sServerKeyBits:
intptr = &options->server_key_bits;
parse_int:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing integer value.",
filename, linenum);
value = atoi(arg);
if (*intptr == -1)
*intptr = value;
break;
case sLoginGraceTime:
intptr = &options->login_grace_time;
parse_time:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing time value.",
filename, linenum);
if ((value = convtime(arg)) == -1)
fatal("%s line %d: invalid time value.",
filename, linenum);
if (*intptr == -1)
*intptr = value;
break;
case sKeyRegenerationTime:
intptr = &options->key_regeneration_time;
goto parse_time;
case sListenAddress:
arg = strdelim(&cp);
if (!arg || *arg == '\0' || strncmp(arg, "[]", 2) == 0)
fatal("%s line %d: missing inet addr.",
filename, linenum);
if (*arg == '[') {
if ((p = strchr(arg, ']')) == NULL)
fatal("%s line %d: bad ipv6 inet addr usage.",
filename, linenum);
arg++;
memmove(p, p+1, strlen(p+1)+1);
} else if (((p = strchr(arg, ':')) == NULL) ||
(strchr(p+1, ':') != NULL)) {
add_listen_addr(options, arg, 0);
break;
}
if (*p == ':') {
u_short port;
p++;
if (*p == '\0')
fatal("%s line %d: bad inet addr:port usage.",
filename, linenum);
else {
*(p-1) = '\0';
if ((port = a2port(p)) == 0)
fatal("%s line %d: bad port number.",
filename, linenum);
add_listen_addr(options, arg, port);
}
} else if (*p == '\0')
add_listen_addr(options, arg, 0);
else
fatal("%s line %d: bad inet addr usage.",
filename, linenum);
break;
case sHostKeyFile:
intptr = &options->num_host_key_files;
if (*intptr >= MAX_HOSTKEYS)
fatal("%s line %d: too many host keys specified (max %d).",
filename, linenum, MAX_HOSTKEYS);
charptr = &options->host_key_files[*intptr];
parse_filename:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing file name.",
filename, linenum);
if (*charptr == NULL) {
*charptr = tilde_expand_filename(arg, getuid());
/* increase optional counter */
if (intptr != NULL)
*intptr = *intptr + 1;
}
break;
case sPidFile:
charptr = &options->pid_file;
goto parse_filename;
case sPermitRootLogin:
intptr = &options->permit_root_login;
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing yes/"
"without-password/forced-commands-only/no "
"argument.", filename, linenum);
value = 0; /* silence compiler */
if (strcmp(arg, "without-password") == 0)
value = PERMIT_NO_PASSWD;
else if (strcmp(arg, "forced-commands-only") == 0)
value = PERMIT_FORCED_ONLY;
else if (strcmp(arg, "yes") == 0)
value = PERMIT_YES;
else if (strcmp(arg, "no") == 0)
value = PERMIT_NO;
else
fatal("%s line %d: Bad yes/"
"without-password/forced-commands-only/no "
"argument: %s", filename, linenum, arg);
if (*intptr == -1)
*intptr = value;
break;
case sIgnoreRhosts:
intptr = &options->ignore_rhosts;
parse_flag:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing yes/no argument.",
filename, linenum);
value = 0; /* silence compiler */
if (strcmp(arg, "yes") == 0)
value = 1;
else if (strcmp(arg, "no") == 0)
value = 0;
else
fatal("%s line %d: Bad yes/no argument: %s",
filename, linenum, arg);
if (*intptr == -1)
*intptr = value;
break;
case sIgnoreUserKnownHosts:
intptr = &options->ignore_user_known_hosts;
goto parse_flag;
case sRhostsAuthentication:
intptr = &options->rhosts_authentication;
goto parse_flag;
case sRhostsRSAAuthentication:
intptr = &options->rhosts_rsa_authentication;
goto parse_flag;
case sHostbasedAuthentication:
intptr = &options->hostbased_authentication;
goto parse_flag;
case sHostbasedUsesNameFromPacketOnly:
intptr = &options->hostbased_uses_name_from_packet_only;
goto parse_flag;
case sRSAAuthentication:
intptr = &options->rsa_authentication;
goto parse_flag;
case sPubkeyAuthentication:
intptr = &options->pubkey_authentication;
goto parse_flag;
#if defined(KRB4) || defined(KRB5)
case sKerberosAuthentication:
intptr = &options->kerberos_authentication;
goto parse_flag;
case sKerberosOrLocalPasswd:
intptr = &options->kerberos_or_local_passwd;
goto parse_flag;
case sKerberosTicketCleanup:
intptr = &options->kerberos_ticket_cleanup;
goto parse_flag;
#endif
#if defined(AFS) || defined(KRB5)
case sKerberosTgtPassing:
intptr = &options->kerberos_tgt_passing;
goto parse_flag;
#endif
#ifdef AFS
case sAFSTokenPassing:
intptr = &options->afs_token_passing;
goto parse_flag;
#endif
case sPasswordAuthentication:
intptr = &options->password_authentication;
goto parse_flag;
case sKbdInteractiveAuthentication:
intptr = &options->kbd_interactive_authentication;
goto parse_flag;
case sChallengeResponseAuthentication:
intptr = &options->challenge_response_authentication;
goto parse_flag;
case sPrintMotd:
intptr = &options->print_motd;
goto parse_flag;
case sPrintLastLog:
intptr = &options->print_lastlog;
goto parse_flag;
case sX11Forwarding:
intptr = &options->x11_forwarding;
goto parse_flag;
case sX11DisplayOffset:
intptr = &options->x11_display_offset;
goto parse_int;
case sX11UseLocalhost:
intptr = &options->x11_use_localhost;
goto parse_flag;
case sXAuthLocation:
charptr = &options->xauth_location;
goto parse_filename;
case sStrictModes:
intptr = &options->strict_modes;
goto parse_flag;
case sKeepAlives:
intptr = &options->keepalives;
goto parse_flag;
case sEmptyPasswd:
intptr = &options->permit_empty_passwd;
goto parse_flag;
case sUseLogin:
intptr = &options->use_login;
goto parse_flag;
case sGatewayPorts:
intptr = &options->gateway_ports;
goto parse_flag;
case sVerifyReverseMapping:
intptr = &options->verify_reverse_mapping;
goto parse_flag;
case sLogFacility:
intptr = (int *) &options->log_facility;
arg = strdelim(&cp);
value = log_facility_number(arg);
if (value == SYSLOG_FACILITY_NOT_SET)
fatal("%.200s line %d: unsupported log facility '%s'",
filename, linenum, arg ? arg : "<NONE>");
if (*intptr == -1)
*intptr = (SyslogFacility) value;
break;
case sLogLevel:
intptr = (int *) &options->log_level;
arg = strdelim(&cp);
value = log_level_number(arg);
if (value == SYSLOG_LEVEL_NOT_SET)
fatal("%.200s line %d: unsupported log level '%s'",
filename, linenum, arg ? arg : "<NONE>");
if (*intptr == -1)
*intptr = (LogLevel) value;
break;
case sAllowTcpForwarding:
intptr = &options->allow_tcp_forwarding;
goto parse_flag;
case sUsePrivilegeSeparation:
intptr = &use_privsep;
goto parse_flag;
case sAllowUsers:
while ((arg = strdelim(&cp)) && *arg != '\0') {
if (options->num_allow_users >= MAX_ALLOW_USERS)
fatal("%s line %d: too many allow users.",
filename, linenum);
options->allow_users[options->num_allow_users++] = xstrdup(arg);
}
break;
case sDenyUsers:
while ((arg = strdelim(&cp)) && *arg != '\0') {
if (options->num_deny_users >= MAX_DENY_USERS)
fatal( "%s line %d: too many deny users.",
filename, linenum);
options->deny_users[options->num_deny_users++] = xstrdup(arg);
}
break;
case sAllowGroups:
while ((arg = strdelim(&cp)) && *arg != '\0') {
if (options->num_allow_groups >= MAX_ALLOW_GROUPS)
fatal("%s line %d: too many allow groups.",
filename, linenum);
options->allow_groups[options->num_allow_groups++] = xstrdup(arg);
}
break;
case sDenyGroups:
while ((arg = strdelim(&cp)) && *arg != '\0') {
if (options->num_deny_groups >= MAX_DENY_GROUPS)
fatal("%s line %d: too many deny groups.",
filename, linenum);
options->deny_groups[options->num_deny_groups++] = xstrdup(arg);
}
break;
case sCiphers:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing argument.", filename, linenum);
if (!ciphers_valid(arg))
fatal("%s line %d: Bad SSH2 cipher spec '%s'.",
filename, linenum, arg ? arg : "<NONE>");
if (options->ciphers == NULL)
options->ciphers = xstrdup(arg);
break;
case sMacs:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing argument.", filename, linenum);
if (!mac_valid(arg))
fatal("%s line %d: Bad SSH2 mac spec '%s'.",
filename, linenum, arg ? arg : "<NONE>");
if (options->macs == NULL)
options->macs = xstrdup(arg);
break;
case sProtocol:
intptr = &options->protocol;
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing argument.", filename, linenum);
value = proto_spec(arg);
if (value == SSH_PROTO_UNKNOWN)
fatal("%s line %d: Bad protocol spec '%s'.",
filename, linenum, arg ? arg : "<NONE>");
if (*intptr == SSH_PROTO_UNKNOWN)
*intptr = value;
break;
case sSubsystem:
if (options->num_subsystems >= MAX_SUBSYSTEMS) {
fatal("%s line %d: too many subsystems defined.",
filename, linenum);
}
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing subsystem name.",
filename, linenum);
for (i = 0; i < options->num_subsystems; i++)
if (strcmp(arg, options->subsystem_name[i]) == 0)
fatal("%s line %d: Subsystem '%s' already defined.",
filename, linenum, arg);
options->subsystem_name[options->num_subsystems] = xstrdup(arg);
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing subsystem command.",
filename, linenum);
options->subsystem_command[options->num_subsystems] = xstrdup(arg);
options->num_subsystems++;
break;
case sMaxStartups:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing MaxStartups spec.",
filename, linenum);
if ((n = sscanf(arg, "%d:%d:%d",
&options->max_startups_begin,
&options->max_startups_rate,
&options->max_startups)) == 3) {
if (options->max_startups_begin >
options->max_startups ||
options->max_startups_rate > 100 ||
options->max_startups_rate < 1)
fatal("%s line %d: Illegal MaxStartups spec.",
filename, linenum);
} else if (n != 1)
fatal("%s line %d: Illegal MaxStartups spec.",
filename, linenum);
else
options->max_startups = options->max_startups_begin;
break;
case sBanner:
charptr = &options->banner;
goto parse_filename;
/*
* These options can contain %X options expanded at
* connect time, so that you can specify paths like:
*
* AuthorizedKeysFile /etc/ssh_keys/%u
*/
case sAuthorizedKeysFile:
case sAuthorizedKeysFile2:
charptr = (opcode == sAuthorizedKeysFile ) ?
&options->authorized_keys_file :
&options->authorized_keys_file2;
goto parse_filename;
case sClientAliveInterval:
intptr = &options->client_alive_interval;
goto parse_time;
case sClientAliveCountMax:
intptr = &options->client_alive_count_max;
goto parse_int;
case sDeprecated:
log("%s line %d: Deprecated option %s",
filename, linenum, arg);
while (arg)
arg = strdelim(&cp);
break;
default:
fatal("%s line %d: Missing handler for opcode %s (%d)",
filename, linenum, arg, opcode);
}
if ((arg = strdelim(&cp)) != NULL && *arg != '\0')
fatal("%s line %d: garbage at end of line; \"%.200s\".",
filename, linenum, arg);
return 0;
}
/* Reads the server configuration file. */
void
read_server_config(ServerOptions *options, const char *filename)
{
FILE *f;
char line[1024];
int linenum;
int bad_options = 0;
f = fopen(filename, "r");
if (!f) {
perror(filename);
exit(1);
}
linenum = 0;
while (fgets(line, sizeof(line), f)) {
/* Update line number counter. */
linenum++;
if (process_server_config_line(options, line, filename, linenum) != 0)
bad_options++;
}
fclose(f);
if (bad_options > 0)
fatal("%s: terminating, %d bad configuration options",
filename, bad_options);
}