~-prefixed paths, in particular ~user ones. Allows scp in sftp mode to accept
these paths, like scp in rcp mode does.
prompted by and much discussion deraadt@
ok markus@
OpenBSD-Commit-ID: 7d794def9e4de348e1e777f6030fc9bafdfff392
when it encounters an unquoted comment.
Add some additional utility function for working with argument
vectors, since we'll be switching to using them to parse
ssh/sshd_config shortly.
ok markus@ as part of a larger diff; tested in snaps
OpenBSD-Commit-ID: fd9c108cef2f713f24e3bc5848861d221bb3a1ac
handled specially by the protocol. Useful in ~/.ssh/config to set TERM to
something generic (e.g. "xterm" instead of "xterm-256color") for destinations
that lack terminfo entries. feedback and ok dtucker@
OpenBSD-Commit-ID: 38b1ef4d5bc159c7d9d589d05e3017433e2d5758
On platforms where sizeof(int) != sizeof(long), convtime could accept values
>MAX_INT which subsequently truncate when stored in an int during config
parsing. bz#3250, ok djm@
OpenBSD-Commit-ID: 8fc932683d6b4660d52f50911d62bd6639c5db31
make privilege dropping optional but allow it via callbacks (to avoid
need to link uidswap.c everywhere)
add some other flags (keep environment, disable strict path safety check)
that make this more useful for client-side use.
feedback & ok markus@
OpenBSD-Commit-ID: a80ea9fdcc156f1a18e9c166122c759fae1637bf
TCP connect. The connection phase of the SSH session is time-sensitive (due
to server side login grace periods) and is frequently interactive (e.g.
entering passwords). The ultimate interactive/bulk TOS/DSCP will be set after
authentication completes.
ok dtucker@
OpenBSD-Commit-ID: f31ab10d9233363a6d2c9996007083ba43a093f1
stdout and/or stderr to /dev/null. Factor all these out to a single
stdfd_devnull() function that allows selection of which of these to redirect.
ok markus@
OpenBSD-Commit-ID: 3033ba5a4c47cacfd5def020d42cabc52fad3099
environment variables on the client side. The supported keywords are
CertificateFile, ControlPath, IdentityAgent and IdentityFile, plus
LocalForward and RemoteForward when used for Unix domain socket paths. This
would for example allow forwarding of Unix domain socket paths that change at
runtime. bz#3140, ok djm@
OpenBSD-Commit-ID: a4a2e801fc2d4df2fe0e58f50d9c81b03822dffa
interval in a human- friendly format. Switch copyright for this file from BSD
to MIT to make it easier to add Henning's copyright for this function. ok
markus@
OpenBSD-Commit-ID: 414a831c662df7e68893e5233e86f2cac081ccf9
sigaction(2). This wrapper blocks all other signals during the handler
preventing races between handlers, and sets SA_RESTART which should reduce
the potential for short read/write operations.
OpenBSD-Commit-ID: 5e047663fd77a40d7b07bdabe68529df51fd2519
host/port was added in 2001 as an alternative to host:port syntax for
the benefit of IPv6 users. These days there are establised standards
for this like [::1]:22 and the slash syntax is easily mistaken for CIDR
notation, which OpenSSH now supports for some things. Remove the slash
notation from ListenAddress and PermitOpen. bz#2335, patch from jjelen
at redhat.com, ok markus@
OpenBSD-Commit-ID: fae5f4e23c51a368d6b2d98376069ac2b10ad4b7
ssh->kex and factor out the banner exchange. This eliminates some common code
from the client and server.
Also be more strict about handling \r characters - these should only
be accepted immediately before \n (pointed out by Jann Horn).
Inspired by a patch from Markus Schmidt.
(lots of) feedback and ok markus@
OpenBSD-Commit-ID: 1cc7885487a6754f63641d7d3279b0941890275b
written bytes before the initial timer check so that the first buffer written
is accounted. Set the threshold after which the timer is checked such that
the limit starts being computed as soon as possible, ie after the second
buffer is written. This prevents an initial burst of traffic and provides a
more accurate bandwidth limit. bz#2927, ok djm.
OpenBSD-Commit-ID: ff3ef76e4e43040ec198c2718d5682c36b255cb6
cannot be setuid and sshd always has privsep on, we can remove the uid checks
for low port binds and just let the system do the check. We leave a sanity
check for the !privsep case so long as the code is stil there. with & ok
djm@
OpenBSD-Commit-ID: 9535cfdbd1cd54486fdbedfaee44ce4367ec7ca0
environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
Replace atoi and strtol conversions for integer arguments
to config keywords with a checking wrapper around strtonum. This will
prevent and flag invalid and negative arguments to these keywords. ok djm@
OpenBSD-Commit-ID: 99ae3981f3d608a219ccb8d2fff635ae52c17998
Add monotime_ts and monotime_tv that return monotonic
timespec and timeval respectively. Replace calls to gettimeofday() in packet
timing with monotime_tv so that the callers will work over a clock step.
Should prevent integer overflow during clock steps reported by wangle6 at
huawei.com. "I like" markus@
OpenBSD-Commit-ID: 74d684264814ff806f197948b87aa732cb1b0b8a
add sshd_config RDomain keyword to place sshd and the
subsequent user session (including the shell and any TCP/IP forwardings) into
the specified rdomain(4)
ok markus@
Upstream-ID: be2358e86346b5cacf20d90f59f980b87d1af0f5
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
add a "quiet" flag to exited_cleanly() that supresses
errors about exit status (failure due to signal is still reported)
Upstream-ID: db85c39c3aa08e6ff67fc1fb4ffa89f807a9d2f0
Move several subprocess-related functions from various
locations to misc.c. Extend subprocess() to offer a little more control over
stdio disposition.
feedback & ok dtucker@
Upstream-ID: 3573dd7109d13ef9bd3bed93a3deb170fbfce049
On startup, check to see if sshd is already daemonized
and if so, skip the call to daemon() and do not rewrite the PidFile. This
means that when sshd re-execs itself on SIGHUP the process ID will no longer
change. Should address bz#2641. ok djm@ markus@.
Upstream-ID: 5ea0355580056fb3b25c1fd6364307d9638a37b9
Factor out "can bind to low ports" check into its own function. This will
make it easier for Portable to support platforms with permissions models
other than uid==0 (eg bz#2625). ok djm@, "doesn't offend me too much"
deraadt@.
Upstream-ID: 86213df4183e92b8f189a6d2dac858c994bfface
Add MAXIMUM(), MINIMUM(), and ROUNDUP() to misc.h, then
use those definitions rather than pulling <sys/param.h> and unknown namespace
pollution. ok djm markus dtucker
Upstream-ID: 712cafa816c9f012a61628b66b9fbd5687223fb8
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
don't record duplicate LocalForward and RemoteForward
entries; fixes failure with ExitOnForwardFailure+hostname canonicalisation
where the same forwards are added on the second pass through the
configuration file. bz#2562; ok dtucker@
Upstream-ID: 40a51d68b6300f1cc61deecdb7d4847b8b7b0de1
Improve precision of progressmeter for sftp and scp by
storing sub-second timestamps. Pointed out by mmcc@, ok deraadt@ markus@
Upstream-ID: 38fd83a3d83dbf81c8ff7b5d1302382fe54970ab
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
[chacha.h cipher-chachapoly.h digest.h hmac.h kex.h kexc25519.c]
[misc.h poly1305.h ssh-pkcs11.c defines.h]
revert __bounded change; it causes way more problems for portable than
it solves; pointed out by dtucker@
[misc.c misc.h umac.c]
use get/put_u32 to load values rather than *((UINT32 *)p) that breaks on
strict-alignment architectures; reported by and ok stsp@
[chacha.h cipher-chachapoly.h digest.h hmac.h kex.h kexc25519.c
[misc.h poly1305.h ssh-pkcs11.c]
use __bounded(...) attribute recently added to sys/cdefs.h instead of
longform __attribute__(__bounded(...));
for brevity and a warning free compilation with llvm/clang
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
refactor client config code a little:
add multistate option partsing to readconf.c, similar to servconf.c's
existing code.
move checking of options that accept "none" as an argument to readconf.c
add a lowercase() function and use it instead of explicit tolower() in
loops
part of a larger diff that was ok markus@
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
channels.c sandbox-systrace.c]
Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
keepalives and rekeying will work properly over clock steps. Suggested by
markus@, "looks good" djm@.
