Historicallly, hpdelim accepted ":" or "/" as a port delimiter between
hosts (or addresses) and ports. These days most of the uses for "/"
are no longer accepted, so there are several places where it checks the
delimiter to disallow it. Make hpdelim accept only ":" and use hpdelim2
in the other cases. ok djm@
OpenBSD-Commit-ID: 7e6420bd1be87590b6840973f5ad5305804e3102
the config file to do the same thing as -n does on the ssh(1) commandline.
Patch from Volker Diels-Grabsch via GHPR231; ok dtucker
OpenBSD-Commit-ID: 66ddf3f15c76796d4dcd22ff464aed1edd62468e
configuration file to offer equivalent control to the -N (no session) and -s
(subsystem) command-line flags.
Part of GHPR#231 by Volker Diels-Grabsch with some minor tweaks;
feedback and ok dtucker@
OpenBSD-Commit-ID: 726ee931dd4c5cc7f1d7a187b26f41257f9a2d12
When built against tcmalloc, tcmalloc allocates a descriptor for its
internal use, so calling closefrom() afterward causes the descriptor
number to be reused resulting in a corrupted connection. Moving the
closefrom a little earlier should resolve this. From kircherlike at
outlook.com via bz#3321, ok djm@
This fixes a couple of problems with the previous tokeniser,
strdelim()
1. strdelim() is permissive wrt accepting '=' characters. This is
intended to allow it to tokenise "Option=value" but because it
cannot keep state, it will incorrectly split "Opt=val=val2".
2. strdelim() has rudimentry handling of quoted strings, but it
is incomplete and inconsistent. E.g. it doesn't handle escaped
quotes inside a quoted string.
3. It has no support for stopping on a (unquoted) comment. Because
of this readconf.c r1.343 added chopping of lines at '#', but
this caused a regression because these characters may legitimately
appear inside quoted strings.
The new tokeniser is stricter is a number of cases, including #1 above
but previously it was also possible for some directives to appear
without arguments. AFAIK these were nonsensical in all cases, and the
new tokeniser refuses to accept them.
The new code handles quotes much better, permitting quoted space as
well as escaped closing quotes. Finally, comment handling should be
fixed - the tokeniser will terminate only on unquoted # characters.
feedback & ok markus@
tested in snaps for the last five or so days - thanks Theo and those who
caught bugs
OpenBSD-Commit-ID: dc72fd12af9d5398f4d9e159d671f9269c5b14d5
handled specially by the protocol. Useful in ~/.ssh/config to set TERM to
something generic (e.g. "xterm" instead of "xterm-256color") for destinations
that lack terminfo entries. feedback and ok dtucker@
OpenBSD-Commit-ID: 38b1ef4d5bc159c7d9d589d05e3017433e2d5758
ssh(1) needs to set file descriptors to non-blocking mode to operate
but it was not restoring the original state on exit. This could cause
problems with fds shared with other programs via the shell, e.g.
> $ cat > test.sh << _EOF
> #!/bin/sh
> {
> ssh -Fnone -oLogLevel=verbose ::1 hostname
> cat /usr/share/dict/words
> } | sleep 10
> _EOF
> $ ./test.sh
> Authenticated to ::1 ([::1]:22).
> Transferred: sent 2352, received 2928 bytes, in 0.1 seconds
> Bytes per second: sent 44338.9, received 55197.4
> cat: stdout: Resource temporarily unavailable
This restores the blocking status for fds 0,1,2 (stdio) before ssh(1)
abandons/closes them.
This was reported as bz3280 and GHPR246; ok dtucker@
OpenBSD-Commit-ID: 8cc67346f05aa85a598bddf2383fcfcc3aae61ce
shell when the -N (no shell) option was specified. bz3290 reported by Richard
Schwab; patch from markus@ ok me
OpenBSD-Commit-ID: ea1ea4af16a95687302f7690bdbe36a6aabf87e1
some PKCS#11 providers get upset if C_Initialize is not matched with
C_Finalize.
From Adithya Baglody via GHPR#234; ok markus
OpenBSD-Commit-ID: f8e770e03b416ee9a58f9762e162add900f832b6
HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms, which more
accurately reflects its effect. This matches a previous change to
PubkeyAcceptedAlgorithms. The previous names are retained as aliases. ok
djm@
OpenBSD-Commit-ID: 49451c382adc6e69d3fa0e0663eeef2daa4b199e
PubkeyAcceptedAlgorithms. While the two were originally equivalent, this
actually specifies the signature algorithms that are accepted. Some key
types (eg RSA) can be used by multiple algorithms (eg ssh-rsa, rsa-sha2-512)
so the old name is becoming increasingly misleading. The old name is
retained as an alias. Prompted by bz#3253, help & ok djm@, man page help jmc@
OpenBSD-Commit-ID: 0346b2f73f54c43d4e001089759d149bfe402ca5
consolidate the common arguments into a single struct and pass that around
instead of using a bunch of globals. ok markus@
OpenBSD-Commit-ID: 035e6d7ca9145ad504f6af5a021943f1958cd19b
ConnectTimeout is specified, capping the effective value (for most platforms)
at 24 days. bz#3229, ok djm@
OpenBSD-Commit-ID: 62d4c4b7b87d111045f8e9f28b5b532d17ac5bc0
The log calls are themselves now macros, and preprocessor directives inside
macro arguments are undefined behaviour which some compilers (eg old GCCs)
choke on. It also makes the code tidier. ok deraadt@
OpenBSD-Commit-ID: cc12a9029833d222043aecd252d654965c351a69
stdout and/or stderr to /dev/null. Factor all these out to a single
stdfd_devnull() function that allows selection of which of these to redirect.
ok markus@
OpenBSD-Commit-ID: 3033ba5a4c47cacfd5def020d42cabc52fad3099
the destination. This allows, eg, keeping host keys in individual files
using "UserKnownHostsFile ~/.ssh/known_hosts.d/%k". bz#1654, ok djm@, jmc@
(man page bits)
OpenBSD-Commit-ID: 7084d723c9cc987a5c47194219efd099af5beadc
UserKnownHostsFile, allowing the file to be automagically split up in the
configuration (eg bz#1654). ok djm@, man page parts jmc@
OpenBSD-Commit-ID: 7e1b406caf147638bb51558836a72d6cc0bd1b18
write to it so we don't leave an empty .ssh directory when it's not needed.
Use the same function to replace the code in ssh-keygen that does the same
thing. bz#3156, ok djm@
OpenBSD-Commit-ID: 59c073b569be1a60f4de36f491a4339bc4ae870f
work with SSLeay (very quickly replaced by OpenSSL) not SSL in general. ok
deraadt, historical context markus@
OpenBSD-Commit-ID: 7209e07a2984b50411ed8ca5a4932da5030d2b90
environment variables on the client side. The supported keywords are
CertificateFile, ControlPath, IdentityAgent and IdentityFile, plus
LocalForward and RemoteForward when used for Unix domain socket paths. This
would for example allow forwarding of Unix domain socket paths that change at
runtime. bz#3140, ok djm@
OpenBSD-Commit-ID: a4a2e801fc2d4df2fe0e58f50d9c81b03822dffa
when used for Unix domain socket forwarding. Factor out the code for the
config keywords that use the most common subset of TOKENS into its own
function. bz#3014, ok jmc@ (man page bits) djm@
OpenBSD-Commit-ID: bffc9f7e7b5cf420309a057408bef55171fd0b97
