- markus@cvs.openbsd.org 2003/06/02 09:17:34
[auth2-hostbased.c auth.c auth-options.c auth-rhosts.c auth-rh-rsa.c]
[canohost.c monitor.c servconf.c servconf.h session.c sshd_config]
[sshd_config.5]
deprecate VerifyReverseMapping since it's dangerous if combined
with IP based access control as noted by Mike Harding; replace with
a UseDNS option, UseDNS is on by default and includes the
VerifyReverseMapping check; with itojun@, provos@, jakob@ and deraadt@
ok deraadt@, djm@
- (djm) Fix portable-specific uses of verify_reverse_mapping too
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
[kexdh.c kexgex.c kex.h pathnames.h readconf.c servconf.h ssh.1
sshconnect1.c sshconnect2.c sshconnect.c sshconnect.h sshd.8]
get rid of known_hosts2, use it for hostkey lookup, but do not
modify.
[auth-chall.c auth.h auth1.c auth2-chall.c auth2.c readconf.c
readconf.h servconf.c servconf.h sshconnect1.c sshconnect2.c sshd.c]
improved kbd-interactive support. work by per@appgate.com and me
[channels.c channels.h servconf.c servconf.h serverloop.c sshd.8]
Add options ClientAliveInterval and ClientAliveCountMax to sshd.
This gives the ability to do a "keepalive" via the encrypted channel
which can't be spoofed (unlike TCP keepalives). Useful for when you want
to use ssh connections to authenticate people for something, and know
relatively quickly when they are no longer authenticated. Disabled
by default (of course). ok markus@
[auth-passwd.c auth.c auth.h auth1.c auth2.c servconf.c servconf.h
ssh-keygen.c sshd.8]
PermitRootLogin={yes,without-password,forced-commands-only,no}
(before this change, root could login even if PermitRootLogin==no)
[Makefile.in sshd.8 sshconnect2.c readconf.h readconf.c packet.c
sshd.c ssh.c ssh.1 servconf.h servconf.c myproposal.h kex.h kex.c]
1) clean up the MAC support for SSH-2
2) allow you to specify the MAC with 'ssh -m'
3) or the 'MACs' keyword in ssh(d)_config
4) add hmac-{md5,sha1}-96
ok stevesk@, provos@
- (djm) OpenBSD CVS sync:
- markus@cvs.openbsd.org 2001/02/03 03:08:38
[auth-options.c auth-rh-rsa.c auth-rhosts.c auth.c canohost.c]
[canohost.h servconf.c servconf.h session.c sshconnect1.c sshd.8]
[sshd_config]
make ReverseMappingCheck optional in sshd_config; ok djm@,dugsong@
- markus@cvs.openbsd.org 2001/02/03 03:19:51
[ssh.1 sshd.8 sshd_config]
Skey is now called ChallengeResponse
- markus@cvs.openbsd.org 2001/02/03 03:43:09
[sshd.8]
use no-pty option in .ssh/authorized_keys* if you need a 8-bit clean
channel. note from Erik.Anggard@cygate.se (pr/1659)
- stevesk@cvs.openbsd.org 2001/02/03 10:03:06
[ssh.1]
typos; ok markus@
- djm@cvs.openbsd.org 2001/02/04 04:11:56
[scp.1 sftp-server.c ssh.1 sshd.8 sftp-client.c sftp-client.h]
[sftp-common.c sftp-common.h sftp-int.c sftp-int.h sftp.1 sftp.c]
Basic interactive sftp client; ok theo@
- (djm) Update RPM specs for new sftp binary
- (djm) Update several bits for new optional reverse lookup stuff. I
think I got them all.
- markus@cvs.openbsd.org 2001/01/08 22:29:05
[auth2.c compat.c compat.h servconf.c servconf.h sshd.8
sshd_config version.h]
implement option 'Banner /etc/issue.net' for ssh2, move version to
2.3.1 (needed for bugcompat detection, 2.3.0 would fail if Banner
is enabled).
- markus@cvs.openbsd.org 2001/01/08 22:03:23
[channels.c ssh-keyscan.c]
O_NDELAY -> O_NONBLOCK; thanks stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/08 21:55:41
[sshconnect1.c]
more cleanups and fixes from stevesk@pobox.com:
1) try_agent_authentication() for loop will overwrite key just
allocated with key_new(); don't alloc
2) call ssh_close_authentication_connection() before exit
try_agent_authentication()
3) free mem on bad passphrase in try_rsa_authentication()
- markus@cvs.openbsd.org 2001/01/08 21:48:17
[kex.c]
missing free; thanks stevesk@pobox.com
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
- markus@cvs.openbsd.org 2000/10/14 04:01:15
[cipher.c]
debug3
- markus@cvs.openbsd.org 2000/10/14 04:07:23
[scp.c]
remove spaces from arguments; from djm@mindrot.org
- markus@cvs.openbsd.org 2000/10/14 06:09:46
[ssh.1]
Cipher is for SSH-1 only
- markus@cvs.openbsd.org 2000/10/14 06:12:09
[servconf.c servconf.h serverloop.c session.c sshd.8]
AllowTcpForwarding; from naddy@
- markus@cvs.openbsd.org 2000/10/14 06:16:56
[auth2.c compat.c compat.h sshconnect2.c version.h]
OpenSSH_2.3; note that is is not complete, but the version number
needs to be changed for interoperability reasons
- markus@cvs.openbsd.org 2000/10/14 06:19:45
[auth-rsa.c]
do not send RSA challenge if key is not allowed by key-options; from
eivind@ThinkSec.com
- markus@cvs.openbsd.org 2000/10/15 08:14:01
[rijndael.c session.c]
typos; from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2000/10/15 08:18:31
[rijndael.c]
typo
- Copy manpages back over from OpenBSD - too tedious to wade through diffs
- markus@cvs.openbsd.org 2000/09/30 10:27:44
[log.c]
allow loglevel debug
- markus@cvs.openbsd.org 2000/10/03 11:59:57
[packet.c]
hmac->mac
- markus@cvs.openbsd.org 2000/10/03 12:03:03
[auth-krb4.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth1.c]
move fake-auth from auth1.c to individual auth methods, disables s/key in
debug-msg
- markus@cvs.openbsd.org 2000/10/03 12:16:48
ssh.c
do not resolve canonname, i have no idea why this was added oin ossh
- markus@cvs.openbsd.org 2000/10/09 15:30:44
ssh-keygen.1 ssh-keygen.c
-X now reads private ssh.com DSA keys, too.
- markus@cvs.openbsd.org 2000/10/09 15:32:34
auth-options.c
clear options on every call.
- markus@cvs.openbsd.org 2000/10/09 15:51:00
authfd.c authfd.h
interop with ssh-agent2, from <res@shore.net>
- markus@cvs.openbsd.org 2000/10/10 14:20:45
compat.c
use rexexp for version string matching
- provos@cvs.openbsd.org 2000/10/10 22:02:18
[kex.c kex.h myproposal.h ssh.h ssh2.h sshconnect2.c sshd.c dh.c dh.h]
First rough implementation of the diffie-hellman group exchange. The
client can ask the server for bigger groups to perform the diffie-hellman
in, thus increasing the attack complexity when using ciphers with longer
keys. University of Windsor provided network, T the company.
- markus@cvs.openbsd.org 2000/10/11 13:59:52
[auth-rsa.c auth2.c]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:00:27
[auth-options.h]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:03:27
[scp.1 scp.c]
support 'scp -o' with help from mouring@pconline.com
- markus@cvs.openbsd.org 2000/10/11 14:11:35
[dh.c]
Wall
- markus@cvs.openbsd.org 2000/10/11 14:14:40
[auth.h auth2.c readconf.c readconf.h readpass.c servconf.c servconf.h]
[ssh.h sshconnect2.c sshd_config auth2-skey.c cli.c cli.h]
add support for s/key (kbd-interactive) to ssh2, based on work by
mkiernan@avantgo.com and me
- markus@cvs.openbsd.org 2000/10/11 14:27:24
[auth.c auth1.c auth2.c authfile.c cipher.c cipher.h kex.c kex.h]
[myproposal.h packet.c readconf.c session.c ssh.c ssh.h sshconnect1.c]
[sshconnect2.c sshd.c]
new cipher framework
- markus@cvs.openbsd.org 2000/10/11 14:45:21
[cipher.c]
remove DES
- markus@cvs.openbsd.org 2000/10/12 03:59:20
[cipher.c cipher.h sshconnect1.c sshconnect2.c sshd.c]
enable DES in SSH-1 clients only
- markus@cvs.openbsd.org 2000/10/12 08:21:13
[kex.h packet.c]
remove unused
- markus@cvs.openbsd.org 2000/10/13 12:34:46
[sshd.c]
Kludge for F-Secure Macintosh < 1.0.2; appro@fy.chalmers.se
- markus@cvs.openbsd.org 2000/10/13 12:59:15
[cipher.c cipher.h myproposal.h rijndael.c rijndael.h]
rijndael/aes support
- markus@cvs.openbsd.org 2000/10/13 13:10:54
[sshd.8]
more info about -V
- markus@cvs.openbsd.org 2000/10/13 13:12:02
[myproposal.h]
prefer no compression
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
- markus@cvs.openbsd.org 2000/06/26 03:22:29
[authfd.c]
cleanup, less cut&paste
- markus@cvs.openbsd.org 2000/06/26 15:59:19
[servconf.c servconf.h session.c sshd.8 sshd.c]
MaxStartups: limit number of unauthenticated connections, work by
theo and me
- deraadt@cvs.openbsd.org 2000/07/05 14:18:07
[session.c]
use no_x11_forwarding_flag correctly; provos ok
- provos@cvs.openbsd.org 2000/07/05 15:35:57
[sshd.c]
typo
- aaron@cvs.openbsd.org 2000/07/05 22:06:58
[scp.1 ssh-agent.1 ssh-keygen.1 sshd.8]
Insert more missing .El directives. Our troff really should identify
these and spit out a warning.
- todd@cvs.openbsd.org 2000/07/06 21:55:04
[auth-rsa.c auth2.c ssh-keygen.c]
clean code is good code
- deraadt@cvs.openbsd.org 2000/07/07 02:14:29
[serverloop.c]
sense of port forwarding flag test was backwards
- provos@cvs.openbsd.org 2000/07/08 17:17:31
[compat.c readconf.c]
replace strtok with strsep; from David Young <dyoung@onthejob.net>
- deraadt@cvs.openbsd.org 2000/07/08 19:21:15
[auth.h]
KNF
- ho@cvs.openbsd.org 2000/07/08 19:27:33
[compat.c readconf.c]
Better conditions for strsep() ending.
- ho@cvs.openbsd.org 2000/07/10 10:27:05
[readconf.c]
Get the correct message on errors. (niels@ ok)
- ho@cvs.openbsd.org 2000/07/10 10:30:25
[cipher.c kex.c servconf.c]
strtok() --> strsep(). (niels@ ok)
<tibbs@math.uh.edu>
- (djm) OpenBSD CVS updates:
- todd@cvs.openbsd.org
[sshconnect2.c]
teach protocol v2 to count login failures properly and also enable an
explanation of why the password prompt comes up again like v1; this is NOT
crypto
- markus@cvs.openbsd.org
[readconf.c readconf.h servconf.c servconf.h session.c ssh.1 ssh.c sshd.8]
xauth_location support; pr 1234
[readconf.c sshconnect2.c]
typo, unused
[session.c]
allow use_login only for login sessions, otherwise remote commands are
execed with uid==0
[sshd.8]
document UseLogin better
[version.h]
OpenSSH 2.1.1
[auth-rsa.c]
fix match_hostname() logic for auth-rsa: deny access if we have a
negative match or no match at all
[channels.c hostfile.c match.c]
don't panic if mkdtemp fails for authfwd; jkb@yahoo-inc.com via
kris@FreeBSD.org
- [sshd.c sshd.8 sshconnect.c ssh.h ssh.c servconf.h servconf.c scp.1]
[scp.c packet.h packet.c login.c log.c canohost.c channels.c]
[hostfile.c sshd_config]
ipv6 support: mostly gethostbyname->getaddrinfo/getnameinfo, new
features: sshd allows multiple ListenAddress and Port options. note
that libwrap is not IPv6-ready. (based on patches from
fujiwara@rcac.tdi.co.jp)
- [ssh.c canohost.c]
more hints (hints.ai_socktype=SOCK_STREAM) for getaddrinfo,
from itojun@
- [channels.c]
listen on _all_ interfaces for X11-Fwd (hints.ai_flags = AI_PASSIVE)
- [packet.h]
allow auth-kerberos for IPv4 only
- [scp.1 sshd.8 servconf.h scp.c]
document -4, -6, and 'ssh -L 2022/::1/22'
- [ssh.c]
'ssh @host' is illegal (null user name), from
karsten@gedankenpolizei.de
- [sshconnect.c]
better error message
- [sshd.c]
allow auth-kerberos for IPv4 only
- Big IPv6 merge:
- Cleanup overrun in sockaddr copying on RHL 6.1
- Replacements for getaddrinfo, getnameinfo, etc based on versions
from patch from KIKUCHI Takahiro <kick@kyoto.wide.ad.jp>
- Replacement for missing structures on systems that lack IPv6
- record_login needed to know about AF_INET6 addresses
- Borrowed more code from OpenBSD: rresvport_af and requisites
- Merged OpenBSD CVS changes:
- [channels.c]
report from mrwizard@psu.edu via djm@ibs.com.au
- [channels.c]
set SO_REUSEADDR and SO_LINGER for forwarded ports.
chip@valinux.com via damien@ibs.com.au
- [nchan.c]
it's not an error() if shutdown_write failes in nchan.
- [readconf.c]
remove dead #ifdef-0-code
- [readconf.c servconf.c]
strcasecmp instead of tolower
- [scp.c]
progress meter overflow fix from damien@ibs.com.au
- [ssh-add.1 ssh-add.c]
SSH_ASKPASS support
- [ssh.1 ssh.c]
postpone fork_after_authentication until command execution,
request/patch from jahakala@cc.jyu.fi via damien@ibs.com.au
plus: use daemon() for backgrounding
- OpenBSD CVS updates
- [channels.c cipher.c compat.c log-client.c scp.c serverloop.c]
[ssh.h sshd.8 sshd.c]
syslog changes:
* Unified Logmessage for all auth-types, for success and for failed
* Standard connections get only ONE line in the LOG when level==LOG:
Auth-attempts are logged only, if authentication is:
a) successfull or
b) with passwd or
c) we had more than AUTH_FAIL_LOG failues
* many log() became verbose()
* old behaviour with level=VERBOSE
- [readconf.c readconf.h ssh.1 ssh.h sshconnect.c sshd.c]
tranfer s/key challenge/response data in SSH_SMSG_AUTH_TIS_CHALLENGE
messages. allows use of s/key in windows (ttssh, securecrt) and
ssh-1.2.27 clients without 'ssh -v', ok: niels@
- [sshd.8]
-V, for fallback to openssh in SSH2 compatibility mode
- [sshd.c]
fix sigchld race; cjc5@po.cwru.edu
