[clientloop.h clientloop.c mux.c]
No need for the mux cleanup callback to be visible so restore it to static
and call it through the detach_user function pointer. ok djm@
[clientloop.c clientloop.h mux.c]
Force a clean shutdown of ControlMaster client sessions when the ~. escape
sequence is used. This means that ~. should now work in mux clients even
if the server is no longer responding. Found by tedu, ok djm.
[channels.c channels.h clientloop.h mux.c ssh.c]
support for cancelling local and remote port forwards via the multiplex
socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request
the cancellation of the specified forwardings; ok markus@
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c]
hook up a channel confirm callback to warn the user then requested X11
forwarding was refused by the server; ok markus@
[PROTOCOL.mux clientloop.c clientloop.h mux.c]
improve our behaviour when TTY allocation fails: if we are in
RequestTTY=auto mode (the default), then do not treat at TTY
allocation error as fatal but rather just restore the local TTY
to cooked mode and continue. This is more graceful on devices that
never allocate TTYs.
If RequestTTY is set to "yes" or "force", then failure to allocate
a TTY is fatal.
ok markus@
[PROTOCOL.mux clientloop.c clientloop.h mux.c ssh.1 ssh.c]
allow graceful shutdown of multiplexing: request that a mux server
removes its listener socket and refuse future multiplexing requests;
ok markus@
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
mux support for remote forwarding with dynamic port allocation,
use with
LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
feedback and ok djm@
[channels.c channels.h clientloop.c clientloop.h mux.c nchan.c ssh.c]
rewrite ssh(1) multiplexing code to a more sensible protocol.
The new multiplexing code uses channels for the listener and
accepted control sockets to make the mux master non-blocking, so
no stalls when processing messages from a slave.
avoid use of fatal() in mux master protocol parsing so an errant slave
process cannot take down a running master.
implement requesting of port-forwards over multiplexed sessions. Any
port forwards requested by the slave are added to those the master has
established.
add support for stdio forwarding ("ssh -W host:port ...") in mux slaves.
document master/slave mux protocol so that other tools can use it to
control a running ssh(1). Note: there are no guarantees that this
protocol won't be incompatibly changed (though it is versioned).
feedback Salvador Fandino, dtucker@
channel changes ok markus@
[clientloop.h channels.h clientloop.c channels.c mux.c]
The multiplexing escape char handler commit last night introduced a
small memory leak per session; plug it.
[clientloop.h ssh.c clientloop.c]
maintain an ordered queue of outstanding global requests that we
expect replies to, similar to the per-channel confirmation queue.
Use this queue to verify success or failure for remote forward
establishment in a race free way.
ok dtucker@
[clientloop.h mux.c channels.c clientloop.c channels.h]
Enable ~ escapes for multiplex slave sessions; give each channel
its own escape state and hook the escape filters up to muxed
channels. bz #1331
Mux slaves do not currently support the ~^Z and ~& escapes.
NB. this change cranks the mux protocol version, so a new ssh
mux client will not be able to connect to a running old ssh
mux master.
ok dtucker@
[clientloop.c clientloop.h ssh.c mux.c]
tidy up session multiplexing code, moving it into its own file and
making the function names more consistent - making ssh.c and
clientloop.c a fair bit more readable.
ok markus@
[clientloop.c clientloop.h ssh.c]
Use new channel status confirmation callback system to properly deal
with "important" channel requests that fail, in particular command exec,
shell and subsystem requests. Previously we would optimistically assume
that the requests would always succeed, which could cause hangs if they
did not (e.g. when the server runs out of fds) or were unimplemented by
the server (bz #1384)
Also, properly report failing multiplex channel requests via the mux
client stderr (subject to LogLevel in the mux master) - better than
silently failing.
most bits ok markus@ (as part of a larger diff)
[clientloop.c clientloop.h ssh.c]
bz#1232: ensure that any specified LocalCommand is executed after the
tunnel device is opened. Also, make failures to open a tunnel device
fatal when ExitOnForwardFailure is active.
Reported by h.goebel AT goebel-consult.de; ok dtucker markus reyk deraadt
[channels.c clientloop.c clientloop.h misc.c misc.h ssh.c ssh_config.5]
implement support for X11 and agent forwarding over multiplex slave
connections. Because of protocol limitations, the slave connections inherit
the master's DISPLAY and SSH_AUTH_SOCK rather than distinctly forwarding
their own.
ok dtucker@ "put it in" deraadt@
- djm@cvs.openbsd.org 2005/06/16 03:38:36
[channels.c channels.h clientloop.c clientloop.h ssh.c]
move x11_get_proto from ssh.c to clientloop.c, to make muliplexed xfwd
easier later; ok deraadt@
[clientloop.c clientloop.h ssh.1 ssh.c]
add basic control of a running multiplex master connection; including the
ability to check its status and request it to exit; ok markus@
[channels.c channels.h clientloop.c clientloop.h includes.h readconf.c]
[readconf.h scp.1 sftp.1 ssh.1 ssh.c ssh_config.5]
implement session multiplexing in the client (the server has supported
this since 2.0); ok markus@
[clientloop.c clientloop.h readconf.c readconf.h scp.1 sftp.1 ssh.1]
[ssh.c ssh_config.5]
application layer keep alive (ServerAliveInterval ServerAliveCountMax)
for ssh(1), similar to the sshd(8) option; ok beck@; with help from
jmc and dtucker@
NEED TO BE GENERATED* =) Refer to to entry "2001/01/16 19:20:06"
for more details.
20010118
- (bal) Super Sized OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/11 22:14:20 GMT 2001 by markus
[sshd.c]
maxfd+1
- markus@cvs.openbsd.org 2001/01/13 17:59:18
[ssh-keygen.1]
small ssh-keygen manpage cleanup; stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:03:07
[scp.c ssh-keygen.c sshd.c]
getopt() returns -1 not EOF; stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:06:54
[ssh-keyscan.c]
use SSH_DEFAULT_PORT; from stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:12:47
[ssh-keyscan.c]
free() -> xfree(); fix memory leak; from stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:14:13
[ssh-add.c]
typo, from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2001/01/13 18:32:50
[packet.c session.c ssh.c sshconnect.c sshd.c]
split out keepalive from packet_interactive (from dale@accentre.com)
set IPTOS_LOWDELAY TCP_NODELAY IPTOS_THROUGHPUT for ssh2, too.
- markus@cvs.openbsd.org 2001/01/13 18:36:45
[packet.c packet.h]
reorder, typo
- markus@cvs.openbsd.org 2001/01/13 18:38:00
[auth-options.c]
fix comment
- markus@cvs.openbsd.org 2001/01/13 18:43:31
[session.c]
Wall
- markus@cvs.openbsd.org 2001/01/13 19:14:08
[clientloop.h clientloop.c ssh.c]
move callback to headerfile
- markus@cvs.openbsd.org 2001/01/15 21:40:10
[ssh.c]
use log() instead of stderr
- markus@cvs.openbsd.org 2001/01/15 21:43:51
[dh.c]
use error() not stderr!
- markus@cvs.openbsd.org 2001/01/15 21:45:29
[sftp-server.c]
rename must fail if newpath exists, debug off by default
- markus@cvs.openbsd.org 2001/01/15 21:46:38
[sftp-server.c]
readable long listing for sftp-server, ok deraadt@
- markus@cvs.openbsd.org 2001/01/16 19:20:06
[key.c ssh-rsa.c]
make "ssh-rsa" key format for ssh2 confirm to the ietf-drafts; from
galb@vandyke.com. note that you have to delete older ssh2-rsa keys,
since they are in the wrong format, too. they must be removed from
.ssh/authorized_keys2 and .ssh/known_hosts2, etc.
(cd; grep -v ssh-rsa .ssh/authorized_keys2 > TMP && mv TMP
.ssh/authorized_keys2) additionally, we now check that
BN_num_bits(rsa->n) >= 768.
- markus@cvs.openbsd.org 2001/01/16 20:54:27
[sftp-server.c]
remove some statics. simpler handles; idea from nisse@lysator.liu.se
- deraadt@cvs.openbsd.org 2001/01/16 23:58:08
[bufaux.c radix.c sshconnect.h sshconnect1.c]
indent
- (bal) Added bsd-strmode.[ch] since some non-OpenBSD platforms may
be missing such feature.
