add a whitelist of paths from which ssh-agent will load
(via ssh-pkcs11-helper) a PKCS#11 module; ok markus@
Upstream-ID: fe79769469d9cd6d26fe0dc15751b83ef2a06e8f
Add an AddKeysToAgent client option which can be set to
'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a
private key that is used during authentication will be added to ssh-agent if
it is running (with confirmation enabled if set to 'confirm').
Initial version from Joachim Schipper many years ago.
ok markus@
Upstream-ID: a680db2248e8064ec55f8be72d539458c987d5f4
"commandline" -> "command line", since there are so few
examples of the former in the pages, so many of the latter, and in some of
these pages we had multiple spellings;
prompted by tj
Upstream-ID: 78459d59bff74223f8139d9001ccd56fc4310659
Add FingerprintHash option to control algorithm used for
key fingerprints. Default changes from MD5 to SHA256 and format from hex to
base64.
Feedback and ok naddy@ markus@
[ssh-agent.1]
remove the identity files from this manpage - ssh-agent doesn't deal
with them at all and the same information is duplicated in ssh-add.1
(which does deal with them); prodded by deraadt@
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[ssh-agent.1 ssh-add.1 ssh.1]
write UNIX-domain in a more consistent way; while here, replace a
few remaining ".Tn UNIX" macros with ".Ux" ones.
pointed out by ratchov@, thanks!
ok jmc@
[scp.1 ssh_config.5 sftp-server.8 ssh-agent.1 sshd_config.5 sftp.1
ssh-keygen.1 ssh-keyscan.1 ssh-add.1 sshd.8 ssh.1 ssh-keysign.8]
convert to new .Dd format;
(We will need to teach mdoc2man.awk to understand this too.)
[ssh-agent.1]
Update agent socket path templates to reflect reality, correct xref for
time formats. bz#1121, patch from openssh at roumenpetrov.info, ok djm@
[ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8]
[sshd_config.5] OpenSSH doesn't ever look at the $HOME environment
variable, so don't say that we do (bz #623); ok deraadt@
- marc@cvs.openbsd.org 2003/01/21 18:14:36
[ssh-agent.1 ssh-agent.c]
Add a -t life option to ssh-agent that set the default lifetime.
The default can still be overriden by using -t in ssh-add.
OK markus@
[ssh-agent.1 ssh-agent.c]
'-a bind_address' binds the agent to user-specified unix-domain
socket instead of /tmp/ssh-XXXXXXXX/agent.<pid>; ok djm@ (some time ago).
- (bal) Merge OpenBSD changes:
- markus@cvs.openbsd.org 2000/11/15 22:31:36
[auth-options.c]
case insensitive key options; from stevesk@sweeden.hp.com
- markus@cvs.openbsd.org 2000/11/16 17:55:43
[dh.c]
do not use perror() in sshd, after child is forked()
- markus@cvs.openbsd.org 2000/11/14 23:42:40
[auth-rsa.c]
parse option only if key matches; fix some confusing seen by the client
- markus@cvs.openbsd.org 2000/11/14 23:44:19
[session.c]
check no_agent_forward_flag for ssh-2, too
- markus@cvs.openbsd.org 2000/11/15
[ssh-agent.1]
reorder SYNOPSIS; typo, use .It
- markus@cvs.openbsd.org 2000/11/14 23:48:55
[ssh-agent.c]
do not reorder keys if a key is removed
- markus@cvs.openbsd.org 2000/11/15 19:58:08
[ssh.c]
just ignore non existing user keys
- millert@cvs.openbsd.org 200/11/15 20:24:43
[ssh-keygen.c]
Add missing \n at end of error message.
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
