when it is available. It takes into account time spent suspended,
thereby ensuring timeouts (e.g. for expiring agent keys) fire
correctly. bz#2228 reported by John Haxby
[authfile.c bufaux.c buffer.h channels.c krl.c mux.c packet.c packet.h]
[ssh-keygen.c]
buffer_get_string_ptr's return should be const to remind
callers that futzing with it will futz with the actual buffer
contents
[channels.c]
bz#2147: fix multiple remote forwardings with dynamically assigned
listen ports. In the s->c message to open the channel we were sending
zero (the magic number to request a dynamic port) instead of the actual
listen port. The client therefore had no way of discriminating between
them.
Diagnosis and fix by ronf AT timeheart.net
[channels.c]
bz#1297 - tell the client (via packet_send_debug) when their preferred
listen address has been overridden by the server's GatewayPorts;
ok dtucker@
[channels.c]
avoid unaligned access in code that reused a buffer to send a
struct in_addr in a reply; simpler just use use buffer_put_int();
from portable; spotted by and ok dtucker@
blocking connecting socket will clear any stored errno that might
otherwise have been retrievable via getsockopt(). A hack to limit writes
to TTYs on AIX was triggering this. Since only AIX needs the hack, wrap
it in an #ifdef. Diagnosis and patch from Ivo Raisr.
[channels.c channels.h clientloop.c]
Add an "ABANDONED" channel state and use for mux sessions that are
disconnected via the ~. escape sequence. Channels in this state will
be able to close if the server responds, but do not count as active channels.
This means that if you ~. all of the mux clients when using ControlPersist
on a broken network, the backgrounded mux master will exit when the
Control Persist time expires rather than hanging around indefinitely.
bz#1917, also reported and tested by tedu@. ok djm@ markus@.
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
channels.c sandbox-systrace.c]
Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
keepalives and rekeying will work properly over clock steps. Suggested by
markus@, "looks good" djm@.
[auth-options.c channels.c servconf.c servconf.h serverloop.c session.c]
[sshd_config.5]
make AllowTcpForwarding accept "local" and "remote" in addition to its
current "yes"/"no" to allow the server to specify whether just local or
remote TCP forwarding is enabled. ok markus@
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h]
unbreak remote portforwarding with dynamic allocated listen ports:
1) send the actual listen port in the open message (instead of 0).
this allows multiple forwardings with a dynamic listen port
2) update the matching permit-open entry, so we can identify where
to connect to
report: den at skbkontur.ru and P. Szczygielski
feedback and ok djm@
[channels.c auth-options.c servconf.c channels.h sshd.8]
Add wildcard support to PermitOpen, allowing things like "PermitOpen
localhost:*". bz #1857, ok djm markus.
[channels.c channels.h clientloop.h mux.c ssh.c]
support for cancelling local and remote port forwards via the multiplex
socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request
the cancellation of the specified forwardings; ok markus@
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c]
hook up a channel confirm callback to warn the user then requested X11
forwarding was refused by the server; ok markus@
[channels.c]
remove a debug() that pollutes stderr on client connecting to a server
in debug mode (channel_close_fds is called transitively from the session
code post-fork); bz#1719, ok dtucker
[channels.c]
Fix a trio of bugs in the local/remote window calculation for datagram
data channels (i.e. TunnelForward):
Calculate local_consumed correctly in channel_handle_wfd() by measuring
the delta to buffer_len(c->output) from when we start to when we finish.
The proximal problem here is that the output_filter we use in portable
modified the length of the dequeued datagram (to futz with the headers
for !OpenBSD).
In channel_output_poll(), don't enqueue datagrams that won't fit in the
peer's advertised packet size (highly unlikely to ever occur) or which
won't fit in the peer's remaining window (more likely).
In channel_input_data(), account for the 4-byte string header in
datagram packets that we accept from the peer and enqueue in c->output.
report, analysis and testing 2/3 cases from wierbows AT us.ibm.com;
"looks good" markus@
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c]
[packet.c ssh-rsa.c]
implement a timing_safe_cmp() function to compare memory without leaking
timing information by short-circuiting like memcmp() and use it for
some of the more sensitive comparisons (though nothing high-value was
readily attackable anyway); "looks ok" markus@
[channels.c session.c]
bz#1750: fix requirement for /dev/null inside ChrootDirectory for
internal-sftp accidentally introduced in r1.253 by removing the code
that opens and dup /dev/null to stderr and modifying the channels code
to read stderr but discard it instead; ok markus@
[channels.c mux.c readconf.c readconf.h ssh.h]
bz#1327: remove hardcoded limit of 100 permitopen clauses and port
forwards per direction; ok markus@ stevesk@
[channels.c channels.h mux.c ssh.c]
Pause the mux channel while waiting for reply from aynch callbacks.
Prevents misordering of replies if new requests arrive while waiting.
Extend channel open confirm callback to allow signalling failure
conditions as well as success. Use this to 1) fix a memory leak, 2)
start using the above pause mechanism and 3) delay sending a success/
failure message on mux slave session open until we receive a reply from
the server.
motivated by and with feedback from markus@
[channels.c]
fake local addr:port when stdio fowarding as some servers (Tectia at
least) validate that they are well-formed;
reported by imorgan AT nas.nasa.gov
ok dtucker
[channels.c channels.h clientloop.c clientloop.h mux.c nchan.c ssh.c]
rewrite ssh(1) multiplexing code to a more sensible protocol.
The new multiplexing code uses channels for the listener and
accepted control sockets to make the mux master non-blocking, so
no stalls when processing messages from a slave.
avoid use of fatal() in mux master protocol parsing so an errant slave
process cannot take down a running master.
implement requesting of port-forwards over multiplexed sessions. Any
port forwards requested by the slave are added to those the master has
established.
add support for stdio forwarding ("ssh -W host:port ...") in mux slaves.
document master/slave mux protocol so that other tools can use it to
control a running ssh(1). Note: there are no guarantees that this
protocol won't be incompatibly changed (though it is versioned).
feedback Salvador Fandino, dtucker@
channel changes ok markus@
[ssh_config channels.c ssh.1 channels.h ssh.c]
Add a 'netcat mode' (ssh -W). This connects stdio on the client to a
single port forward on the server. This allows, for example, using ssh as
a ProxyCommand to route connections via intermediate servers.
bz #1618, man page help from jmc@, ok markus@
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[channels.c channels.h]
fix race condition in x11/agent channel allocation: don't read after
the end of the select read/write fdset and make sure a reused FD
is not touched before the pre-handlers are called.
with and ok djm@
[sshconnect2.c channels.c sshconnect.c]
Set close-on-exec on various descriptors so they don't get leaked to
child processes. bz #1643, patch from jchadima at redhat, ok deraadt.
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
set IPV6_V6ONLY for local forwarding with GatwayPorts=yes. Unify
setting IPV6_V6ONLY behind a new function misc.c:sock_set_v6only()
report and fix from jan.kratochvil AT redhat.com
the pty master on Solaris, since it never succeeds and can hang if large
amounts of data is sent to the slave (eg a copy-paste). Based on a patch
originally from Doke Scott, ok djm@
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c]
[readconf.h serverloop.c ssh.c]
support remote port forwarding with a zero listen port (-R0:...) to
dyamically allocate a listen port at runtime (this is actually
specified in rfc4254); bz#1003 ok markus@
[channels.c channels.h session.c]
make Channel->path an allocated string, saving a few bytes here and
there and fixing bz#1380 in the process; ok markus@
[channels.c]
call channel destroy callbacks on receipt of open failure messages.
fixes client hangs when connecting to a server that has MaxSessions=0
set spotted by imorgan AT nas.nasa.gov; ok markus@
[channels.c servconf.c]
channel_print_adm_permitted_opens() should deal with all the printing
for that config option. suggested by markus@; ok markus@ djm@
dtucker@
