that I was able to get all the portable bits in the right location. As for
the SKEY comment there is an email out to Markus as to how it should be
resolved. Until then I just #ifdef SKEY/#endif out the whole block.
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/18 16:20:21
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1 ssh.h
sshd.8 sshd.c]
log() is at pri=LOG_INFO, since LOG_NOTICE goes to /dev/console on many
systems
- markus@cvs.openbsd.org 2001/01/18 16:59:59
[auth-passwd.c auth.c auth.h auth1.c auth2.c serverloop.c session.c
session.h sshconnect1.c]
1) removes fake skey from sshd, since this will be much
harder with /usr/libexec/auth/login_XXX
2) share/unify code used in ssh-1 and ssh-2 authentication (server side)
3) make addition of BSD_AUTH and other challenge reponse methods
easier.
- markus@cvs.openbsd.org 2001/01/18 17:12:43
[auth-chall.c auth2-chall.c]
rename *-skey.c *-chall.c since the files are not skey specific
- markus@cvs.openbsd.org 2000/12/28 14:25:51
[auth.h auth2.c]
count authentication failures only
- markus@cvs.openbsd.org 2000/12/28 14:25:03
[sshconnect.c]
fingerprint for MITM attacks, too.
- markus@cvs.openbsd.org 2000/12/28 12:03:57
[sshd.8 sshd.c]
document -D
- markus@cvs.openbsd.org 2000/12/27 14:19:21
[serverloop.c]
less chatty
- markus@cvs.openbsd.org 2000/12/27 12:34
[auth1.c sshconnect2.c sshd.c]
typo
- markus@cvs.openbsd.org 2000/12/27 12:30:19
[readconf.c readconf.h ssh.1 sshconnect.c]
new option: HostKeyAlias: allow the user to record the host key
under a different name. This is useful for ssh tunneling over
forwarded connections or if you run multiple sshd's on different
ports on the same machine.
- markus@cvs.openbsd.org 2000/12/27 11:51:53
[ssh.1 ssh.c]
multiple -t force pty allocation, document ORIGINAL_COMMAND
- markus@cvs.openbsd.org 2000/12/27 11:41:31
[sshd.8]
update for ssh-2
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
- (bal) Fixed dropped answer from skey_keyinfo() in auth1.c
- (bal) Changed from --with-skey to --with-skey=PATH in configure.in
- (bal) Added in check to verify S/Key library is being detected in
configure.in
- (bal) next-posix.h - added another prototype wrapped in POSIX ifdef/endif.
Patch by Mark Miller <markm@swoon.net>
- (bal) Added 'util.h' header to loginrec.c only if HAVE_UTIL_H is defined
to remove warnings under MacOS X. Patch by Mark Miller <markm@swoon.net>
- (bal) Fixed LDFLAG mispelling in configure.in for --with-afs
- markus@cvs.openbsd.org 2000/09/30 10:27:44
[log.c]
allow loglevel debug
- markus@cvs.openbsd.org 2000/10/03 11:59:57
[packet.c]
hmac->mac
- markus@cvs.openbsd.org 2000/10/03 12:03:03
[auth-krb4.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth1.c]
move fake-auth from auth1.c to individual auth methods, disables s/key in
debug-msg
- markus@cvs.openbsd.org 2000/10/03 12:16:48
ssh.c
do not resolve canonname, i have no idea why this was added oin ossh
- markus@cvs.openbsd.org 2000/10/09 15:30:44
ssh-keygen.1 ssh-keygen.c
-X now reads private ssh.com DSA keys, too.
- markus@cvs.openbsd.org 2000/10/09 15:32:34
auth-options.c
clear options on every call.
- markus@cvs.openbsd.org 2000/10/09 15:51:00
authfd.c authfd.h
interop with ssh-agent2, from <res@shore.net>
- markus@cvs.openbsd.org 2000/10/10 14:20:45
compat.c
use rexexp for version string matching
- provos@cvs.openbsd.org 2000/10/10 22:02:18
[kex.c kex.h myproposal.h ssh.h ssh2.h sshconnect2.c sshd.c dh.c dh.h]
First rough implementation of the diffie-hellman group exchange. The
client can ask the server for bigger groups to perform the diffie-hellman
in, thus increasing the attack complexity when using ciphers with longer
keys. University of Windsor provided network, T the company.
- markus@cvs.openbsd.org 2000/10/11 13:59:52
[auth-rsa.c auth2.c]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:00:27
[auth-options.h]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:03:27
[scp.1 scp.c]
support 'scp -o' with help from mouring@pconline.com
- markus@cvs.openbsd.org 2000/10/11 14:11:35
[dh.c]
Wall
- markus@cvs.openbsd.org 2000/10/11 14:14:40
[auth.h auth2.c readconf.c readconf.h readpass.c servconf.c servconf.h]
[ssh.h sshconnect2.c sshd_config auth2-skey.c cli.c cli.h]
add support for s/key (kbd-interactive) to ssh2, based on work by
mkiernan@avantgo.com and me
- markus@cvs.openbsd.org 2000/10/11 14:27:24
[auth.c auth1.c auth2.c authfile.c cipher.c cipher.h kex.c kex.h]
[myproposal.h packet.c readconf.c session.c ssh.c ssh.h sshconnect1.c]
[sshconnect2.c sshd.c]
new cipher framework
- markus@cvs.openbsd.org 2000/10/11 14:45:21
[cipher.c]
remove DES
- markus@cvs.openbsd.org 2000/10/12 03:59:20
[cipher.c cipher.h sshconnect1.c sshconnect2.c sshd.c]
enable DES in SSH-1 clients only
- markus@cvs.openbsd.org 2000/10/12 08:21:13
[kex.h packet.c]
remove unused
- markus@cvs.openbsd.org 2000/10/13 12:34:46
[sshd.c]
Kludge for F-Secure Macintosh < 1.0.2; appro@fy.chalmers.se
- markus@cvs.openbsd.org 2000/10/13 12:59:15
[cipher.c cipher.h myproposal.h rijndael.c rijndael.h]
rijndael/aes support
- markus@cvs.openbsd.org 2000/10/13 13:10:54
[sshd.8]
more info about -V
- markus@cvs.openbsd.org 2000/10/13 13:12:02
[myproposal.h]
prefer no compression
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
- (djm) OpenBSD CVS updates:
- deraadt@cvs.openbsd.org 2000/08/18 20:07:23
[ssh.c]
accept remsh as a valid name as well; roman@buildpoint.com
- deraadt@cvs.openbsd.org 2000/08/18 20:17:13
[deattack.c crc32.c packet.c]
rename crc32() to ssh_crc32() to avoid zlib name clash. do not move to
libz crc32 function yet, because it has ugly "long"'s in it;
oneill@cs.sfu.ca
- deraadt@cvs.openbsd.org 2000/08/18 20:26:08
[scp.1 scp.c]
-S prog support; tv@debian.org
- deraadt@cvs.openbsd.org 2000/08/18 20:50:07
[scp.c]
knf
- deraadt@cvs.openbsd.org 2000/08/18 20:57:33
[log-client.c]
shorten
- markus@cvs.openbsd.org 2000/08/19 12:48:11
[channels.c channels.h clientloop.c ssh.c ssh.h]
support for ~. in ssh2
- deraadt@cvs.openbsd.org 2000/08/19 15:29:40
[crc32.h]
proper prototype
- markus@cvs.openbsd.org 2000/08/19 15:34:44
[authfd.c authfd.h key.c key.h ssh-add.1 ssh-add.c ssh-agent.1]
[ssh-agent.c ssh-keygen.c sshconnect1.c sshconnect2.c Makefile]
[fingerprint.c fingerprint.h]
add SSH2/DSA support to the agent and some other DSA related cleanups.
(note that we cannot talk to ssh.com's ssh2 agents)
- markus@cvs.openbsd.org 2000/08/19 15:55:52
[channels.c channels.h clientloop.c]
more ~ support for ssh2
- markus@cvs.openbsd.org 2000/08/19 16:21:19
[clientloop.c]
oops
- millert@cvs.openbsd.org 2000/08/20 12:25:53
[session.c]
We have to stash the result of get_remote_name_or_ip() before we
close our socket or getpeername() will get EBADF and the process
will exit. Only a problem for "UseLogin yes".
- millert@cvs.openbsd.org 2000/08/20 12:30:59
[session.c]
Only check /etc/nologin if "UseLogin no" since login(1) may have its
own policy on determining who is allowed to login when /etc/nologin
is present. Also use the _PATH_NOLOGIN define.
- millert@cvs.openbsd.org 2000/08/20 12:42:43
[auth1.c auth2.c session.c ssh.c]
Add calls to setusercontext() and login_get*(). We basically call
setusercontext() in most places where previously we did a setlogin().
Add default login.conf file and put root in the "daemon" login class.
- millert@cvs.openbsd.org 2000/08/21 10:23:31
[session.c]
Fix incorrect PATH setting; noted by Markus.
Ben Lindstrom
Damien Miller
Kevin Steves