[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
[auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c]
[key.c servconf.c servconf.h sshd.8 sshd_config.5]
add some optional indirection to matching of principal names listed
in certificates. Currently, a certificate must include the a user's name
to be accepted for authentication. This change adds the ability to
specify a list of certificate principal names that are acceptable.
When authenticating using a CA trusted through ~/.ssh/authorized_keys,
this adds a new principals="name1[,name2,...]" key option.
For CAs listed through sshd_config's TrustedCAKeys option, a new config
option "AuthorizedPrincipalsFile" specifies a per-user file containing
the list of acceptable names.
If either option is absent, the current behaviour of requiring the
username to appear in principals continues to apply.
These options are useful for role accounts, disjoint account namespaces
and "user@realm"-style naming policies in certificates.
feedback and ok markus@
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c]
[authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h]
[ssh-keygen.c ssh.1 sshconnect.c sshd_config.5]
Add a TrustedUserCAKeys option to sshd_config to specify CA keys that
are trusted to authenticate users (in addition than doing it per-user
in authorized_keys).
Add a RevokedKeys option to sshd_config and a @revoked marker to
known_hosts to allow keys to me revoked and banned for user or host
authentication.
feedback and ok markus@
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
[servconf.c servconf.h sshd.c]
avoid run-time failures when specifying hostkeys via a relative
path by prepending the cwd in these cases; bz#1290; ok dtucker@
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8]
Add extended test mode (-T) and connection parameters for test mode (-C).
-T causes sshd to write its effective configuration to stdout and exit.
-C causes any relevant Match rules to be applied before output. The
combination allows tesing of the parser and config files. ok deraadt djm
[monitor.c monitor_wrap.c session.h servconf.c servconf.h session.c]
[sshd_config sshd_config.5]
Make the maximum number of sessions run-time controllable via
a sshd_config MaxSessions knob. This is useful for disabling
login/shell/subsystem access while leaving port-forwarding working
(MaxSessions 0), disabling connection multiplexing (MaxSessions 1) or
simply increasing the number of allows multiplexed sessions.
Because some bozos are sure to configure MaxSessions in excess of the
number of available file descriptors in sshd (which, at peak, might be
as many as 9*MaxSessions), audit sshd to ensure that it doesn't leak fds
on error paths, and make it fail gracefully on out-of-fd conditions -
sending channel errors instead of than exiting with fatal().
bz#1090; MaxSessions config bits and manpage from junyer AT gmail.com
ok markus@
[servconf.c servconf.h session.c sshd_config.5]
Enable the AllowAgentForwarding option in sshd_config (global and match
context), to specify if agents should be permitted on the server.
As the man page states:
``Note that disabling Agent forwarding does not improve security
unless users are also denied shell access, as they can always install
their own forwarders.''
ok djm@, ok and a mild frown markus@
[servconf.c servconf.h session.c sftp-server.c sftp.h sshd_config]
[sshd_config.5]
add sshd_config ChrootDirectory option to chroot(2) users to a directory
and tweak internal sftp server to work with it (no special files in
chroot required). ok markus@
[monitor_wrap.c servconf.c servconf.h monitor.c sshd_config.5]
Teach Match how handle config directives that are used before
authentication. This allows configurations such as permitting password
authentication from the local net only while requiring pubkey from
offsite. ok djm@, man page bits ok jmc@
[channels.c channels.h servconf.c servconf.h sshd_config.5]
Make PermitOpen take a list of permitted ports and act more like most
other keywords (ie the first match is the effective setting). This
also makes it easier to override a previously set PermitOpen. ok djm@
[servconf.c servconf.h session.c sshd.8 sshd_config sshd_config.5]
Add ForceCommand keyword to sshd_config, equivalent to the "command="
key option, man page entry and example in sshd_config.
Feedback & ok djm@, man page corrections & ok jmc@
[sshd.c servconf.h servconf.c sshd_config.5 auth.c]
Add support for conditional directives to sshd_config via a "Match"
keyword, which works similarly to the "Host" directive in ssh_config.
Lines after a Match line override the default set in the main section
if the condition on the Match line is true, eg
AllowTcpForwarding yes
Match User anoncvs
AllowTcpForwarding no
will allow port forwarding by all users except "anoncvs".
Currently only a very small subset of directives are supported.
ok djm@
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
[readconf.c readconf.h servconf.c servconf.h session.c session.h ssh.c
ssh_config.5 sshd_config.5]
bz #815: implement ability to pass specified environment variables from
the client to the server; ok markus@
[readconf.c readconf.h scp.1 servconf.c servconf.h sftp.1 ssh.1]
[ssh_config.5 sshconnect.c sshd.c sshd_config.5]
rename keepalive to tcpkeepalive; the old name causes too much
confusion; ok djm, dtucker; with help from jmc@
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
- markus@cvs.openbsd.org 2003/06/02 09:17:34
[auth2-hostbased.c auth.c auth-options.c auth-rhosts.c auth-rh-rsa.c]
[canohost.c monitor.c servconf.c servconf.h session.c sshd_config]
[sshd_config.5]
deprecate VerifyReverseMapping since it's dangerous if combined
with IP based access control as noted by Mike Harding; replace with
a UseDNS option, UseDNS is on by default and includes the
VerifyReverseMapping check; with itojun@, provos@, jakob@ and deraadt@
ok deraadt@, djm@
- (djm) Fix portable-specific uses of verify_reverse_mapping too
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
