sshd_config and sshd_config; previously if the same name was reused then the
last would win (which is the opposite to how the config is supposed to work).
While there, make the ssh_config parsing more like sshd_config.
bz3438, ok dtucker
OpenBSD-Commit-ID: 797909c1e0262c0d00e09280459d7ab00f18273b
the config file to do the same thing as -n does on the ssh(1) commandline.
Patch from Volker Diels-Grabsch via GHPR231; ok dtucker
OpenBSD-Commit-ID: 66ddf3f15c76796d4dcd22ff464aed1edd62468e
configuration file to offer equivalent control to the -N (no session) and -s
(subsystem) command-line flags.
Part of GHPR#231 by Volker Diels-Grabsch with some minor tweaks;
feedback and ok dtucker@
OpenBSD-Commit-ID: 726ee931dd4c5cc7f1d7a187b26f41257f9a2d12
handled specially by the protocol. Useful in ~/.ssh/config to set TERM to
something generic (e.g. "xterm" instead of "xterm-256color") for destinations
that lack terminfo entries. feedback and ok dtucker@
OpenBSD-Commit-ID: 38b1ef4d5bc159c7d9d589d05e3017433e2d5758
ssh(1) needs to set file descriptors to non-blocking mode to operate
but it was not restoring the original state on exit. This could cause
problems with fds shared with other programs via the shell, e.g.
> $ cat > test.sh << _EOF
> #!/bin/sh
> {
> ssh -Fnone -oLogLevel=verbose ::1 hostname
> cat /usr/share/dict/words
> } | sleep 10
> _EOF
> $ ./test.sh
> Authenticated to ::1 ([::1]:22).
> Transferred: sent 2352, received 2928 bytes, in 0.1 seconds
> Bytes per second: sent 44338.9, received 55197.4
> cat: stdout: Resource temporarily unavailable
This restores the blocking status for fds 0,1,2 (stdio) before ssh(1)
abandons/closes them.
This was reported as bz3280 and GHPR246; ok dtucker@
OpenBSD-Commit-ID: 8cc67346f05aa85a598bddf2383fcfcc3aae61ce
stdout and/or stderr to /dev/null. Factor all these out to a single
stdfd_devnull() function that allows selection of which of these to redirect.
ok markus@
OpenBSD-Commit-ID: 3033ba5a4c47cacfd5def020d42cabc52fad3099
sigaction(2). This wrapper blocks all other signals during the handler
preventing races between handlers, and sets SA_RESTART which should reduce
the potential for short read/write operations.
OpenBSD-Commit-ID: 5e047663fd77a40d7b07bdabe68529df51fd2519
some arbitrary value < 0. errno is only updated in this case. Change all
(most?) callers of syscalls to follow this better, and let's see if this
strictness helps us in the future.
OpenBSD-Commit-ID: 48081f00db7518e3b712a49dca06efc2a5428075
API, started almost exactly six years ago.
This change stops including the old packet_* API by default and makes
each file that requires the old API include it explicitly. We will
commit file-by-file refactoring to remove the old API in consistent
steps.
with & ok markus@
OpenBSD-Commit-ID: 93c98a6b38f6911fd1ae025a1ec57807fb4d4ef4
the mentioned tasks are obsolete and, of the remainder, most are already
captured in PROTOCOL.mux where they better belong
OpenBSD-Commit-ID: 16d9d76dee42a5bb651c9d6740f7f0ef68aeb407
function names,
Gives better symmetry with the existing mux_client_*() names and makes
it more obvious when a message comes from the master vs client (they
are interleved in ControlMaster=auto mode).
no functional change beyond prefixing a could of log messages with
__func__ where they were previously lacking.
OpenBSD-Commit-ID: b01f7c3fdf92692e1713a822a89dc499333daf75
environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
addresses may be listened on when the client requests remote forwarding (ssh
-R).
This is the converse of the existing PermitOpen directive and this
includes some refactoring to share much of its implementation.
feedback and ok markus@
OpenBSD-Commit-ID: 15a931238c61a3f2ac74ea18a98c933e358e277f
Use strsignal in debug message instead of casting for the
benefit of portable where sig_atomic_t might not be int. "much nicer"
deraadt@
Upstream-ID: 2dac6c1e40511c700bd90664cd263ed2299dcf79
Make remote channel ID a u_int
Previously we tracked the remote channel IDs in an int, but this is
strictly incorrect: the wire protocol uses uint32 and there is nothing
in-principle stopping a SSH implementation from sending, say, 0xffff0000.
In practice everyone numbers their channels sequentially, so this has
never been a problem.
ok markus@
Upstream-ID: b9f4cd3dc53155b4a5c995c0adba7da760d03e73
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
return failure rather than fatal() for more cases during
mux negotiations. Causes the session to fall back to a non-mux connection if
they occur. bz#2707 ok dtucker@
Upstream-ID: d2a7892f464d434e1f615334a1c9d0cdb83b29ab
The POSIX APIs that that sockaddrs all ignore the s*_len
field in the incoming socket, so userspace doesn't need to set it unless it
has its own reasons for tracking the size along with the sockaddr.
ok phessler@ deraadt@ florian@
Upstream-ID: ca6e49e2f22f2b9e81d6d924b90ecd7e422e7437
When tearing down ControlMaster connecctions, don't
pollute stderr when LogLevel=quiet. Patch from Tim Kuijsten via tech@.
Upstream-ID: d9b3a68b2a7c2f2fc7f74678e29a4618d55ceced
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux
client speaks the ssh-packet protocol directly over unix-domain socket. - mux
server acts as a proxy, translates channel IDs and relays to the server. - no
filedescriptor passing necessary. - combined with unix-domain forwarding it's
even possible to run mux client and server on different machines. feedback
& ok djm@
Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
Move the host and port used by ssh -W into the Options
struct. This will make future changes a bit easier. ok djm@
Upstream-ID: 151bce5ecab2fbedf0d836250a27968d30389382
eliminate fallback from untrusted X11 forwarding to trusted
forwarding when the X server disables the SECURITY extension; Reported by
Thomas Hoger; ok deraadt@
Upstream-ID: f76195bd2064615a63ef9674a0e4096b0713f938
adjust pledge promises for ControlMaster: when using
"ask" or "autoask", the process will use ssh-askpass for asking confirmation.
problem found by halex@
ok halex@
Upstream-ID: 38a58b30ae3eef85051c74d3c247216ec0735f80
pledges ssh client: - mux client: which is used when
ControlMaster is in use. will end with "stdio proc tty" (proc is to
permit sending SIGWINCH to mux master on window resize)
- client loop: several levels of pledging depending of your used options
ok deraadt@
Upstream-ID: 21676155a700e51f2ce911e33538e92a2cd1d94b
fix some signed/unsigned integer type mismatches in
format strings; reported by Nicholas Lemonias
Upstream-ID: 78cd55420a0eef68c4095bdfddd1af84afe5f95c
[mux.c ssh.c]
reflect stdio-forward ("ssh -W host:port ...") failures in exit status.
previously we were always returning 0. bz#2255 reported by Brendan
Germain; ok dtucker
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
