Increase the buffer sizes for user prompts to ensure that
they won't be truncated by snprintf. Based on patch from cjwatson at
debian.org via bz#2768, ok djm@
Upstream-ID: 6ffacf1abec8f40b469de5b94bfb29997d96af3e
Add user@host prefix to client's "Permisison denied"
messages, useful in particular when using "stacked" connections where it's
not clear which host is denying. bz#2720, ok djm@ markus@
Upstream-ID: de88e1e9dcb050c98e85377482d1287a9fe0d2be
allow ssh to use certificates accompanied by a private
key file but no corresponding plain *.pub public key. bz#2617 based on patch
from Adam Eijdenberg; ok dtucker@ markus@
Upstream-ID: 295668dca2c39505281577217583ddd2bd4b00b9
Make ssh_packet_set_rekey_limits take u32 for the number of
seconds until rekeying (negative values are rejected at config parse time).
This allows the removal of some casts and a signed vs unsigned comparison
warning.
rekey_time is cast to int64 for the comparison which is a no-op
on OpenBSD, but should also do the right thing in -portable on
anything still using 32bit time_t (until the system time actually
wraps, anyway).
some early guidance deraadt@, ok djm@
Upstream-ID: c9f18613afb994a07e7622eb326f49de3d123b6c
don't dereference authctxt before testing != NULL, it
causes compilers to make assumptions; from Karsten Weiss
Upstream-ID: 794243aad1e976ebc717885b7a97a25e00c031b2
Fix public key authentication when multiple
authentication is in use. Instead of deleting and re-preparing the entire
keys list, just reset the 'used' flags; the keys list is already in a good
order (with already- tried keys at the back)
Analysis and patch from Vincent Brillault on bz#2642; ok dtucker@
Upstream-ID: 7123f12dc2f3bcaae715853035a97923d7300176
restore pre-auth compression support in the client -- the
previous commit was intended to remove it from the server only.
remove a few server-side pre-auth compression bits that escaped
adjust wording of Compression directive in sshd_config(5)
pointed out by naddy@ ok markus@
Upstream-ID: d23696ed72a228dacd4839dd9f2dec424ba2016b
Remove support for pre-authentication compression. Doing
compression early in the protocol probably seemed reasonable in the 1990s,
but today it's clearly a bad idea in terms of both cryptography (cf. multiple
compression oracle attacks in TLS) and attack surface.
Moreover, to support it across privilege-separation zlib needed
the assistance of a complex shared-memory manager that made the
required attack surface considerably larger.
Prompted by Guido Vranken pointing out a compiler-elided security
check in the shared memory manager found by Stack
(http://css.csail.mit.edu/stack/); ok deraadt@ markus@
NB. pre-auth authentication has been disabled by default in sshd
for >10 years.
Upstream-ID: 32af9771788d45a0779693b41d06ec199d849caf
If ssh receives a PACKET_DISCONNECT during userauth it
will cause ssh_dispatch_run(DISPATCH_BLOCK, ...) to return without the
session being authenticated. Check for this and exit if necessary. ok djm@
Upstream-ID: b3afe126c0839d2eae6cddd41ff2ba317eda0903
Lower loglevel for "Authenticated with partial success"
message similar to other similar level. bz#2599, patch from cgallek at
gmail.com, ok markus@
Upstream-ID: 3faab814e947dc7b2e292edede23e94c608cb4dd
support UTF-8 characters in ssh(1) banners using
schwarze@'s safe fmprintf printer; bz#2058
feedback schwarze@ ok dtucker@
Upstream-ID: a72ce4e3644c957643c9524eea2959e41b91eea7
add support for additional fixed DH groups from
draft-ietf-curdle-ssh-kex-sha2-03
diffie-hellman-group14-sha256 (2K group)
diffie-hellman-group16-sha512 (4K group)
diffie-hellman-group18-sha512 (8K group)
based on patch from Mark D. Baushke and Darren Tucker
ok markus@
Upstream-ID: ac00406ada4f0dfec41585ca0839f039545bc46f
fix signed/unsigned errors reported by clang-3.7; add
sshbuf_dup_string() to replace a common idiom of strdup(sshbuf_ptr()) with
better safety checking; feedback and ok markus@
Upstream-ID: 71f926d9bb3f1efed51319a6daf37e93d57c8820
unbreak authentication using lone certificate keys in
ssh-agent: when attempting pubkey auth with a certificate, if no separate
private key is found among the keys then try with the certificate key itself.
bz#2550 reported by Peter Moody
Upstream-ID: f939cd76d68e6a9a3d1711b5a943d6ed1e623966
fix spurious error message when incorrect passphrase
entered for keys; reported by espie@ ok deraadt@
Upstream-ID: 58b2e46e63ed6912ed1ee780bd3bd8560f9a5899
implement SHA2-{256,512} for RSASSA-PKCS1-v1_5 signatures
(user and host auth) based on draft-rsa-dsa-sha2-256-03.txt and
draft-ssh-ext-info-04.txt; with & ok djm@
Upstream-ID: cf82ce532b2733e5c4b34bb7b7c94835632db309
Add an AddKeysToAgent client option which can be set to
'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a
private key that is used during authentication will be added to ssh-agent if
it is running (with confirmation enabled if set to 'confirm').
Initial version from Joachim Schipper many years ago.
ok markus@
Upstream-ID: a680db2248e8064ec55f8be72d539458c987d5f4
apply PubkeyAcceptedKeyTypes filtering earlier, so all
skipped keys are noted before pubkey authentication starts. ok dtucker@
Upstream-ID: ba4f52f54268a421a2a5f98bb375403f4cb044b8
add ssh_config CertificateFile option to explicitly list
a certificate; patch from Meghana Bhat on bz#2436; ok markus@
Upstream-ID: 58648ec53c510b41c1f46d8fe293aadc87229ab8
Allow ssh_config and sshd_config kex parameters options be
prefixed by a '+' to indicate that the specified items be appended to the
default rather than replacing it.
approach suggested by dtucker@, feedback dlg@, ok markus@
Upstream-ID: 0f901137298fc17095d5756ff1561a7028e8882a
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
Remove pattern length argument from match_pattern_list(), we
only ever use it for strlen(pattern).
Prompted by hanno AT hboeck.de pointing an out-of-bound read
error caused by an incorrect pattern length found using AFL
and his own tools.
ok markus@
Add a ssh_config HostbasedKeyType option to control which
host public key types are tried during hostbased authentication.
This may be used to prevent too many keys being sent to the server,
and blowing past its MaxAuthTries limit.
bz#2211 based on patch by Iain Morgan; ok markus@
