node_exporter/collector/timex.go

210 lines
6.6 KiB
Go
Raw Permalink Normal View History

Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
// Copyright 2017 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//go:build linux && !notimex
// +build linux,!notimex
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
package collector
import (
"errors"
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"fmt"
"os"
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"github.com/go-kit/log"
"github.com/go-kit/log/level"
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"github.com/prometheus/client_golang/prometheus"
"golang.org/x/sys/unix"
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
)
const (
// The system clock is not synchronized to a reliable
// server (TIME_ERROR).
timeError = 5
// The timex.Status time resolution bit (STA_NANO),
// 0 = microsecond, 1 = nanoseconds.
staNano = 0x2000
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
// 1 second in
nanoSeconds = 1000000000
microSeconds = 1000000
// See NOTES in adjtimex(2).
ppm16frac = 1000000.0 * 65536.0
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
)
type timexCollector struct {
offset,
freq,
maxerror,
esterror,
status,
constant,
tick,
ppsfreq,
jitter,
shift,
stabil,
jitcnt,
calcnt,
errcnt,
stbcnt,
tai,
syncStatus typedDesc
logger log.Logger
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
}
func init() {
registerCollector("timex", defaultEnabled, NewTimexCollector)
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
}
// NewTimexCollector returns a new Collector exposing adjtime(3) stats.
func NewTimexCollector(logger log.Logger) (Collector, error) {
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
const subsystem = "timex"
return &timexCollector{
offset: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "offset_seconds"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Time offset in between local system and reference clock.",
nil, nil,
), prometheus.GaugeValue},
freq: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "frequency_adjustment_ratio"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Local clock frequency adjustment.",
nil, nil,
), prometheus.GaugeValue},
maxerror: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "maxerror_seconds"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Maximum error in seconds.",
nil, nil,
), prometheus.GaugeValue},
esterror: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "estimated_error_seconds"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Estimated error in seconds.",
nil, nil,
), prometheus.GaugeValue},
status: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "status"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Value of the status array bits.",
nil, nil,
), prometheus.GaugeValue},
constant: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "loop_time_constant"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Phase-locked loop time constant.",
nil, nil,
), prometheus.GaugeValue},
tick: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "tick_seconds"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Seconds between clock ticks.",
nil, nil,
), prometheus.GaugeValue},
ppsfreq: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "pps_frequency_hertz"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Pulse per second frequency.",
nil, nil,
), prometheus.GaugeValue},
jitter: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "pps_jitter_seconds"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Pulse per second jitter.",
nil, nil,
), prometheus.GaugeValue},
shift: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "pps_shift_seconds"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Pulse per second interval duration.",
nil, nil,
), prometheus.GaugeValue},
stabil: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "pps_stability_hertz"),
"Pulse per second stability, average of recent frequency changes.",
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
nil, nil,
), prometheus.GaugeValue},
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
jitcnt: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "pps_jitter_total"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Pulse per second count of jitter limit exceeded events.",
nil, nil,
), prometheus.CounterValue},
calcnt: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "pps_calibration_total"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Pulse per second count of calibration intervals.",
nil, nil,
), prometheus.CounterValue},
errcnt: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "pps_error_total"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Pulse per second count of calibration errors.",
nil, nil,
), prometheus.CounterValue},
stbcnt: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "pps_stability_exceeded_total"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Pulse per second count of stability limit exceeded events.",
nil, nil,
), prometheus.CounterValue},
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
tai: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "tai_offset_seconds"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"International Atomic Time (TAI) offset.",
nil, nil,
), prometheus.GaugeValue},
syncStatus: typedDesc{prometheus.NewDesc(
prometheus.BuildFQName(namespace, subsystem, "sync_status"),
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
"Is clock synchronized to a reliable server (1 = yes, 0 = no).",
nil, nil,
), prometheus.GaugeValue},
logger: logger,
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
}, nil
}
func (c *timexCollector) Update(ch chan<- prometheus.Metric) error {
var syncStatus float64
var divisor float64
var timex = new(unix.Timex)
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
status, err := unix.Adjtimex(timex)
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
if err != nil {
if errors.Is(err, os.ErrPermission) {
level.Debug(c.logger).Log("msg", "Not collecting timex metrics", "err", err)
return ErrNoData
}
return fmt.Errorf("failed to retrieve adjtimex stats: %w", err)
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
}
if status == timeError {
syncStatus = 0
} else {
syncStatus = 1
}
if (timex.Status & staNano) != 0 {
divisor = nanoSeconds
} else {
divisor = microSeconds
}
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
ch <- c.syncStatus.mustNewConstMetric(syncStatus)
ch <- c.offset.mustNewConstMetric(float64(timex.Offset) / divisor)
ch <- c.freq.mustNewConstMetric(1 + float64(timex.Freq)/ppm16frac)
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
ch <- c.maxerror.mustNewConstMetric(float64(timex.Maxerror) / microSeconds)
ch <- c.esterror.mustNewConstMetric(float64(timex.Esterror) / microSeconds)
ch <- c.status.mustNewConstMetric(float64(timex.Status))
ch <- c.constant.mustNewConstMetric(float64(timex.Constant))
ch <- c.tick.mustNewConstMetric(float64(timex.Tick) / microSeconds)
ch <- c.ppsfreq.mustNewConstMetric(float64(timex.Ppsfreq) / ppm16frac)
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
ch <- c.jitter.mustNewConstMetric(float64(timex.Jitter) / divisor)
ch <- c.shift.mustNewConstMetric(float64(timex.Shift))
ch <- c.stabil.mustNewConstMetric(float64(timex.Stabil) / ppm16frac)
Add timex collector (#664) This collector is based on adjtimex(2) system call. The collector returns three values, status if time is synchronised, offset to remote reference, and local clock frequency adjustment. Values are taken from kernel time keeping data structures to avoid getting involved how the synchronisation is implemented. By that I mean one should not care if time is update using ntpd, systemd.timesyncd, ptpd, and so on. Since all time sync implementation will always end up telling to kernel what is the status with time one can simply omit the software in between, and look results of the syncing. As a positive side effect this makes collector very quick and conceptually specific, this does not monitor availability of NTP server, or network in between, or dns resolution, and other unrelated but necessary things. Minimum set of values to keep eye on are the following three: The node_timex_sync_status tells if local clock is in sync with a remote clock. Value is set to zero when synchronisation to a reliable server is lost, or a time sync software is misconfigured. The node_timex_offset_seconds tells how much local clock is off when compared to reference. In case of multiple time references this value is outcome of RFC 5905 adjustment algorithm. Ideally offset should be close to zero, and it depends about use case how large value is acceptable. For example a typical web server is probably fine if offset is about 0.1 or less, but that would not be good enough for mobile phone base station operator. The node_timex_freq tells amount of adjustment to local clock tick frequency. For example if offset is one second and growing the local clock will need instruction to tick quicker. Number value itself is not very important, and occasional small adjustments are fine. When frequency is unusually in stable one can assume quality of time stamps will not be accurate to very far in sub second range. Obviously explaining why local clock frequency behaves like a passenger in roller coaster is different matter. Explanations can vary from system load, to environmental issues such as a machine being physically too hot. Rest of the measurements can help when debugging. If you run a clock server do probably want to collect and keep track of everything. Pull-request: https://github.com/prometheus/node_exporter/pull/664
2017-09-19 14:54:06 +00:00
ch <- c.jitcnt.mustNewConstMetric(float64(timex.Jitcnt))
ch <- c.calcnt.mustNewConstMetric(float64(timex.Calcnt))
ch <- c.errcnt.mustNewConstMetric(float64(timex.Errcnt))
ch <- c.stbcnt.mustNewConstMetric(float64(timex.Stbcnt))
ch <- c.tai.mustNewConstMetric(float64(timex.Tai))
return nil
}