R_PPC_UADDR32 (R_PPC64_UADDR64) has the same meaning as R_PPC_ADDR32
(R_PPC64_ADDR64), except that its address need not be aligned. For
powerpc64, BFD ld(1) will automatically convert between ADDR<->UADDR
relocations when the address is/isn't at its native alignment. This
will happen if, for example, there is a pointer in a packed struct.
gold and lld do not currently generate R_PPC64_UADDR64, but pass
through misaligned R_PPC64_ADDR64 relocations from object files,
possibly relaxing them to misaligned R_PPC64_RELATIVE. In both cases
(relaxed or not) this violates the PSABI, which defines the relevant
field type as "a 64-bit field occupying 8 bytes, the alignment of
which is 8 bytes unless otherwise specified."
All three linkers violate the PSABI on 32-bit powerpc, where the only
difference is that the field is 32 bits wide, aligned to 4 bytes.
Currently musl fails to load executables linked by BFD ld containing
R_PPC64_UADDR64, with the error "unsupported relocation type 43".
This change provides compatibility with BFD ld on powerpc64, and any
static linker on either architecture that starts following the PSABI
more closely.
otherwise, 32-bit archs that could otherwise share the generic
bits/ipc.h would need to duplicate the struct ipc_perm definition,
obscuring the fact that it's the same. sysvipc is not widely used and
these headers are not commonly included, so there is no performance
gain to be had by limiting the number of indirectly included files
here.
files with the existing time32 definition of IPC_STAT are added to all
current 32-bit archs now, so that when it's changed the change will
show up as a change rather than addition of a new file where it's less
obvious that the value is changing vs the generic one that was used
before.
without this, the SO_RCVTIMEO and SO_SNDTIMEO socket options would
stop working on pre-5.1 kernels after time_t is switched to 64-bit and
their values are changed to the new time64 versions.
new code is written such that it's statically unreachable on 64-bit
archs, and on existing 32-bit archs until the macro values are changed
to activate 64-bit time_t.
the definition of the IPC_64 macro controls the interface between libc
and the kernel through syscalls; it's not a public API. the meaning is
rather obscure. long ago, Linux's sysvipc *id_ds structures used
16-bit uids/gids and wrong types for a few other fields. this was in
the libc5 era, before glibc. the IPC_64 flag (64 is a misnomer; it's
more like 32) tells the kernel to use the modern[-ish] versions of the
structures.
the definition of IPC_64 has nothing to do with whether the arch is
32- or 64-bit. rather, due to either historical accident or
intentional obnoxiousness, the kernel only accepts and masks off the
0x100 IPC_64 flag conditional on CONFIG_ARCH_WANT_IPC_PARSE_VERSION,
i.e. for archs that want to provide, or that accidentally provided,
both. for archs which don't define this option, no masking is
performed and commands with the 0x100 bit set will fail as invalid. so
ultimately, the definition is just a matter of matching an arbitrary
switch defined per-arch in the kernel.
presently, all archs/ABIs have struct stat matching the kernel
stat[64] type, except mips/mipsn32/mips64 which do conversion hacks in
syscall_arch.h to work around bugs in the kernel type. this patch
completely decouples them and adds a translation step to the success
path of fstatat. at present, this is just a gratuitous copying, but it
opens up multiple possibilities for future support for 64-bit time_t
on 32-bit archs and for cleaned-up/unified ABIs.
for clarity, the mips hacks are not yet removed in this commit, so the
mips kstat structs still correspond to the output of the hacks in
their syscall_arch.h files, not the raw kernel type. a subsequent
commit will fix this.
Commit 3517d74a5e changed the token in
sys/ioctl.h from 0x01 to 1, so bits/termios.h no longer matches. Revert
the bits/termios.h change to keep the headers in sync.
This reverts commit 9eda4dc69c.
syscall numbers are now synced up across targets (starting from 403 the
numbers are the same on all targets other than an arch specific offset)
IPC syscalls sem*, shm*, msg* got added where they were missing (except
for semop: only semtimedop got added), the new semctl, shmctl, msgctl
imply IPC_64, see
linux commit 0d6040d4681735dfc47565de288525de405a5c99
arch: add split IPC system calls where needed
new 64bit time_t syscall variants got added on 32bit targets, see
linux commit 48166e6ea47d23984f0b481ca199250e1ce0730a
y2038: add 64-bit time_t syscalls to all 32-bit architectures
new async io syscalls got added, see
linux commit 2b188cc1bb857a9d4701ae59aa7768b5124e262e
Add io_uring IO interface
linux commit edafccee56ff31678a091ddb7219aba9b28bc3cb
io_uring: add support for pre-mapped user IO buffers
a new syscall got added that uses the fd of /proc/<pid> as a stable
handle for processes: allows sending signals without pid reuse issues,
intended to eventually replace rt_sigqueueinfo, kill, tgkill and
rt_tgsigqueueinfo, see
linux commit 3eb39f47934f9d5a3027fe00d906a45fe3a15fad
signal: add pidfd_send_signal() syscall
on some targets (arm, m68k, s390x, sh) some previously missing syscall
numbers got added as well.
the inline syscall code is copied directly from powerpc64. the extent
of register clobber specifiers may be excessive on both; if that turns
out to be the case it can be fixed later.
this will allow the compiler to cache and reuse the result, meaning we
no longer have to take care not to load it more than once for the sake
of archs where the load may be expensive.
depends on commit 1c84c99913 for
correctness, since otherwise the compiler could hoist loads during
stage 3 of dynamic linking before the initial thread-pointer setup.
in our memory model, all atomics are supposed to be full barriers;
stores are not release-only. this is important because store is used
as an unlock operation in places where it needs to acquire the waiter
count to determine if a futex wake is needed. at least in the
malloc-internal locks, but possibly elsewhere, soft deadlocks from
missing futex wake (breakable by poking the threads to restart the
syscall, e.g. by attaching a tracer) were reported to occur.
once the malloc lock is replaced with Jens Gustedt's new lock
implementation (see commit 47d0bcd476),
malloc will not be affected by the issue, but it's not clear that
other uses won't be. reducing the strength of the ordering properties
required from a_store would require a thorough analysis of how it's
used.
to fix the problem, I'm removing the powerpc[64]-specific a_store
definition; now, the top-level atomic.h will implement a_store using
a_barrier on both sides of the store.
it's not clear to me yet whether there might be issues with the other
atomics. it's possible that a_post_llsc needs to be replaced with a
full barrier to guarantee the formal semanics we want, but either way
I think the difference is unlikely to impact the way we use them.
sys/ptrace.h is target specific, use bits/ptrace.h to add target
specific macro definitions.
these macros are kept in the generic sys/ptrace.h even though some
targets don't support them:
PTRACE_GETREGS
PTRACE_SETREGS
PTRACE_GETFPREGS
PTRACE_SETFPREGS
PTRACE_GETFPXREGS
PTRACE_SETFPXREGS
so no macro definition got removed in this patch on any target. only
s390x has a numerically conflicting macro definition (PTRACE_SINGLEBLOCK).
the PT_ aliases follow glibc headers, otherwise the definitions come
from linux uapi headers except ones that are skipped in glibc and
there is no real kernel support (s390x PTRACE_*_AREA) or need special
type definitions (mips PTRACE_*_WATCH_*) or only relevant for linux
2.4 compatibility (PTRACE_OLDSETOPTIONS).
commit 587f5a53bc moved the definition
of SO_PEERSEC to bits/socket.h for archs where the SO_* macros differ
from their standard values, but failed to add copies of the generic
definition for powerpc and powerpc64.
add pkey_mprotect, pkey_alloc, pkey_free syscall numbers,
new in linux commits 3350eb2ea127978319ced883523d828046af4045
and 9499ec1b5e82321829e1c1510bcc37edc20b6f38
In TLS variant I the TLS is above TP (or above a fixed offset from TP)
but on some targets there is a reserved gap above TP before TLS starts.
This matters for the local-exec tls access model when the offsets of
TLS variables from the TP are hard coded by the linker into the
executable, so the libc must compute these offsets the same way as the
linker. The tls offset of the main module has to be
alignup(GAP_ABOVE_TP, main_tls_align).
If there is no TLS in the main module then the gap can be ignored
since musl does not use it and the tls access models of shared
libraries are not affected.
The previous setup only worked if (tls_align & -GAP_ABOVE_TP) == 0
(i.e. TLS did not require large alignment) because the gap was
treated as a fixed offset from TP. Now the TP points at the end
of the pthread struct (which is aligned) and there is a gap above
it (which may also need alignment).
The fix required changing TP_ADJ and __pthread_self on affected
targets (aarch64, arm and sh) and in the tlsdesc asm the offset to
access the dtv changed too.
the output delay features (NL*, CR*, TAB*, BS*, and VT*) are
XSI-shaded. VT* is in the V* namespace reservation but the rest need
to be suppressed in base POSIX namespace.
unfortunately this change introduces feature test macro checks into
another bits header. at some point these checks should be simplified
by having features.h handle the "FTM X implies Y" relationships.
PPC_FEATURE2_HTM_NO_SUSPEND is new in linux commit
cba6ac4869e45cc93ac5497024d1d49576e82666
PPC_FEATURE2_DARN and PPC_FEATURE2_SCV were new in v4.12 in commit
a4700a26107241cc7b9ac8528b2c6714ff99983d
for synchronous page faults, new in linux commit
1c9725974074a047f6080eecc62c50a8e840d050 and
b6fb293f2497a9841d94f6b57bd2bb2cd222da43
note that only targets that use asm-generic/mman.h have this new
flag defined, so undef it on other targets (mips*, powerpc*).
use the same token to define TIOCSER_TEMT as is used in ioctl.h
so when both headers are included there are no redefinition warnings
during musl build.
most of the found naming differences don't matter to musl, because
internally it unifies the syscall names that vary across targets,
but for external code the names should match the kernel uapi.
aarch64:
__NR_fstatat is called __NR_newfstatat in linux.
__NR_or1k_atomic got mistakenly copied from or1k.
arm:
__NR_arm_sync_file_range is an alias for __NR_sync_file_range2
__NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux,
the old non-arm name is kept too, it should not cause issues.
(powerpc has similar nonstandard fadvise and it uses the
normal name.)
i386:
__NR_madvise1 was removed from linux in commit
303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11
microblaze:
__NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite
had different name in linux.
mips:
__NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select
had different name in linux.
mipsn32:
__NR_fstatat is called __NR_newfstatat in linux.
or1k:
__NR__llseek is called __NR_llseek in linux.
the old name is kept too because that's the name musl uses
internally.
powerpc:
__NR_{get,set}res{gid,uid}32 was never present in powerpc linux.
__NR_timerfd was briefly defined in linux but then got renamed.
counts leading zero bits of a 64bit int, undefined on zero input.
(has nothing to do with atomics, added to atomic.h so target specific
helper functions are together.)
there is a logarithmic generic implementation and another in terms of
a 32bit a_clz_32 on targets where that's available.
it is defined in linux asm/sockios.h since commit
ae40eb1ef30ab4120bd3c8b7e3da99ee53d27a23 (linux v2.6.22)
but was missing from musl by accident.
in musl the sockios macros are exposed in sys/ioctl.h together
with other ioctl requests instead of in sys/socket.h because of
namespace rules. (glibc has them in sys/socket.h under _GNU_SOURCE.)
aarch64, arm, mips, mips64, mipsn32, powerpc, powerpc64 and sh have
cpu feature bits defined in linux for AT_HWCAP auxv entry, so expose
those in sys/auxv.h
it seems the mips hwcaps were never exposed to userspace neither
by linux nor by glibc, but that's most likely an oversight.
placing the opening brace on the same line as the struct keyword/tag
is the style I prefer and seems to be the prevailing practice in more
recent additions.
these changes were generated by the command:
find include/ arch/*/bits -name '*.h' \
-exec sed -i '/^struct [^;{]*$/{N;s/\n/ /;}' {} +
and subsequently checked by hand to ensure that the regex did not pick
up any false positives.
same changes as in the generic header.
and BOTHER and IBSHIFT were removed (present in linux uapi but not
in glibc) and TIOCSER_TEMT was added (present in glibc).
mips and powerpc use their own asm/ioctls.h, not the asm-generic/ioctls.h
and they lack termiox macros that are available on other targets.
see kernel commit 1d65b4a088de407e99714fdc27862449db04fb5c
commit 6d38c9cf80 provided an
arm-specific version of posix_fadvise to address the alternate
argument order the kernel expects on arm, but neglected to address
that powerpc (32-bit) has the same issue. instead of having arch
variant files in duplicate, simply put the alternate version in the
top-level file under the control of a macro defined in syscall_arch.h.
the syscalls take an additional flag argument, they were added in commit
f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint
flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09.
the syscall is not allocated for microblaze and sh yet.
it was introduced for offloading copying between regular files
in linux commit 29732938a6289a15e907da234d6692a2ead71855
(microblaze and sh does not yet have the syscall number.)
currently five targets use the same mman.h constants and the rest
share most constants too, so move them to sys/mman.h before the
bits/mman.h include where the differences can be corrected by
redefinition of the macros.
this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most
targets (it should be the same as MADV_DONTNEED), and sh defined
the x86-only MAP_32BIT mmap flag.
Some PowerPC CPUs (e.g. Freescale MPC85xx) have a completely different
instruction set for floating point operations (SPE).
Executing regular PowerPC floating point instructions results in
"Illegal instruction" errors.
Make it possible to run these devices in soft-float mode.
all bits headers that were identical for a number of 'clean' archs are
moved to the new arch/generic tree. in addition, a few headers that
differed only cosmetically from the new generic version are removed.
additional deduplication may be possible in mman.h and in several
headers (limits.h, posix.h, stdint.h) that mostly depend on whether
the arch is 32- or 64-bit, but they are left alone for now because
greater gains are likely possible with more invasive changes to header
logic, which is beyond the scope of this commit.
they lock faulted pages into memory (useful when a small part of a
large mapped file needs efficient access), new in linux v4.4, commit
b0f205c2a3082dd9081f9a94e50658c5fa906ff1
MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
this is mlock with a flags argument, new in linux commit
a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e
as usual microblaze and sh don't have allocated syscall number yet.
new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc,
x32 and x86_64.
membarrier is a system wide memory barrier, moves most of the
synchronization cost to one side, new in kernel commit
5b25b13ab08f616efd566347d809b4ece54570d1
userfaultfd is useful for qemu and is new in kernel commit
8d2afd96c20316d112e04d935d9e09150e988397
switch_endian is powerpc only for switching endianness, new in commit
529d235a0e190ded1d21ccc80a73e625ebcad09b
