at one point, clang reportedly failed to support the asm register
constraints needed for inline syscalls. versions of clang that old
have much bigger problems that preclude using them to compile musl
libc.
mips64 requires 'struct stat' conversion due to incorrect 32-bit
fields where time_t should be in the kernel version of the structure.
syscall_arch.h already performed the correct translation for stat,
fstat, and lstat syscalls, but omitted special handling for fstatat.
This structure was missed when creating the s390x port.
This is based on the report and patch from William Pitcock, but with a
modified structure defintion to more closely match the kernel's
definition.
Including sys/procfs.h complains unknown type name 'fpreg_t' in
bits/user.h. fpreg_t in bits/signal.h and elf_fpreg_t in bits/user.h
are practically the same.
per_struct is never used, even conflicts with kernel header
asm/ptrace.h
the 32-bit pc-relative address for stage 2 of dynamic linker entry was
wrongly loaded with a zero-extending load instead of sign-extending
load, resulting in an invalid jump if the offset happened to be
negative, which depends on the linker's ordering of text sections.
the ABI for arm was silently changed at some point to allow page sizes
other than 4k; traditional binaries built with only 4k-aligned offsets
between load segments cannot run on such systems, but newer binutils
versions use 64k offset alignment.
while larger page size is undesirable for various reasons, users have
encountered hardware and/or kernels that lock the page size to a
larger value, so follow the new ABI and allow it to vary.
when _GNU_SOURCE is defined, which is always the case when compiling
c++ with gcc, these macros for the the indices in gregset_t are
exposed and likely to clash with applications. by using enum constants
rather than macros defined with integer literals, we can make the
clash slightly less likely to break software. the macros are still
defined in case anything checks for them with #ifdef, but they're
defined to expand to themselves so that non-file-scope (e.g.
namespaced) identifiers by the same names still work.
for the sake of avoiding mistakes, the changes were generated with sed
via the command:
sed -i -e 's/#define *\(REG_[A-Z_0-9]\{1,\}\) *\([0-9]\{1,\}\)'\
'/enum { \1 = \2 };\n#define \1 \1/' \
arch/i386/bits/signal.h arch/x86_64/bits/signal.h arch/x32/bits/signal.h
three problems are addressed:
- use of pc arithmetic, which was difficult if not impossible to make
correct in thumb mode on all models, so that relative rather than
absolute pointers to the backends could be used. this was designed
back when there was no coherent model for the early stages of the
dynamic linker before relocations, and is no longer necessary.
- assumption that data (the relative pointers to the backends) can be
accessed at a constant displacement from the code. this will not be
possible on future fdpic subarchs (for cortex-m), so move
responsibility for loading the backend code address to the caller.
- hard-coded arm opcodes using the .word directive. instead, use the
.arch directive to work around the assembler's refusal to assemble
instructions not available (or in some cases, available but just
considered deprecated) in the target isa level. the obscure v6t2
arch is used for v6 code so as to (1) allow generation of thumb2
output if -mthumb is active, and (2) avoid warnings/errors for mcr
barriers that clang would produce if we just set arch to v7-a.
in addition, the __aeabi_read_tp function is moved out of the inner
workings and implemented as an asm wrapper around a C function, so
that asm code does not need to read global data. the asm wrapper
serves to satisfy the ABI calling convention requirements for this
function.
this has been slated for removal for a long time. there is
fundamentally no way to implement stdarg without compiler assistance;
any attempt to do so has serious undefined behavior; its working
depends not just (as a common misconception goes) on ABI, but also on
assumptions about compiler code generation internal to a translation
unit, which is not subject to external ABI constraints.
gdb can only backtrace/unwind across signal handlers if it recognizes
the sa_restorer trampoline. for x86_64, gdb first attempts to
determine the symbol name for the function in which the program
counter resides and match it against "__restore_rt". if no name can be
found (e.g. in the case of a stripped binary), the exact instruction
sequence is matched instead.
when matching the function name, however, gdb's unwind code wrongly
considers the interval [sym,sym+size] rather than [sym,sym+size).
thus, if __restore_rt begins immediately after another function, gdb
wrongly identifies pc as lying within the previous adjacent function.
this patch adds a nop before __restore_rt to preclude that
possibility. it also removes the symbol name __restore and replaces it
with a macro since the stability of whether gdb identifies the
function as __restore_rt or __restore is not clear.
for the no-symbols case, the instruction sequence is changed to use
%rax rather than %eax to match what gdb expects.
based on patch by Szabolcs Nagy, with extended description and
corresponding x32 changes added.
alpha and s390x gratuitously use 64-bit entries (wasting 2x space and
cache utilization) despite the values always being 32-bit.
based on patch by Bobby Bingham, with changes suggested by Alexander
Monakov to use the public Elf_Symndx type from link.h (and make it
properly variable by arch) rather than adding new internal
infrastructure for handling the type.
aarch64, arm, mips, mips64, mipsn32, powerpc, powerpc64 and sh have
cpu feature bits defined in linux for AT_HWCAP auxv entry, so expose
those in sys/auxv.h
it seems the mips hwcaps were never exposed to userspace neither
by linux nor by glibc, but that's most likely an oversight.
despite sh not generally using register-pair alignment for 64-bit
syscall arguments, there are arch-specific versions of the syscall
entry points for pread and pwrite which include a dummy argument for
alignment before the 64-bit offset argument.
placing the opening brace on the same line as the struct keyword/tag
is the style I prefer and seems to be the prevailing practice in more
recent additions.
these changes were generated by the command:
find include/ arch/*/bits -name '*.h' \
-exec sed -i '/^struct [^;{]*$/{N;s/\n/ /;}' {} +
and subsequently checked by hand to ensure that the regex did not pick
up any false positives.
same changes as in the generic header.
and BOTHER and IBSHIFT were removed (present in linux uapi but not
in glibc) and TIOCSER_TEMT was added (present in glibc).
add EXTA, EXTB, CIBAUD, CMSPAR, XCASE macros and hide them as well as
CBAUD, ECHOCTL, ECHOPRT, ECHOKE, FLUSHO, PENDIN in standard mode.
the new macros are both in glibc termios.h and in linux asm/termbits.h,
the later also contains IBSHIFT and BOTHER, those were not added.
these are not standard macros, but some of them are in the reserved
namespace so could be exposed, the ones which are not reserved are
CIBAUD, CMSPAR and XCASE (which was removed in issue 6), the rest
got hidden to be consistent with glibc.
mips and powerpc use their own asm/ioctls.h, not the asm-generic/ioctls.h
and they lack termiox macros that are available on other targets.
see kernel commit 1d65b4a088de407e99714fdc27862449db04fb5c
the (unused) speed fields were omitted when these ports were first
added (within this release cycle, so not present in any release yet)
in accordance with how glibc defines the structure on mips archs.
however their omission does not match existing musl practice/intent.
glibc provides its own, mostly-unified termios structure definition
and performs translation in userspace to match the kernel structure
for the arch, but has gratuitous differences on a few archs like mips,
presumably as a result of historical mistakes. some other libcs use
the kernel definitions directly. musl essentially does that, by
matching the kernel layout in the part of the structure the kernel
will read/write, but leaves additional space at the end for
extensibility. these are nominally the (nonstandard) speed fields and
(on most archs) extra c_cc elements, but since they are not used they
could be repurposed if there's ever a need.
commit 6d38c9cf80 provided an
arm-specific version of posix_fadvise to address the alternate
argument order the kernel expects on arm, but neglected to address
that powerpc (32-bit) has the same issue. instead of having arch
variant files in duplicate, simply put the alternate version in the
top-level file under the control of a macro defined in syscall_arch.h.
the syscalls take an additional flag argument, they were added in commit
f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint
flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09.
the syscall is not allocated for microblaze and sh yet.
Rich Felker
Bobby Bingham
Tuan M. Hoang
rofl0r
Szabolcs Nagy