previously, rpath was only honored for direct dependencies. in other
words, if A depends on B and B depends on C, only B's rpath (if any),
not A's rpath, was being searched for C. this limitation made
rpath-based deployment difficult in the presence of multiple levels of
library dependency.
at present, $ORIGIN processing in rpath is still unsupported.
at present, since POSIX requires %F to behave as %+4Y-%m-%d and ISO C
requires %F to behave as %Y-%m-%d, the default behavior for %Y has
been changed to match %+4Y. this seems to be the only way to conform
to the requirements of both standards, and it does not affect years
prior to the year 10000. depending on the outcome of interpretations
from the standards bodies, this may be adjusted at some point.
use a long long value so that even with offsets, values cannot
overflow. instead of using different format strings for different
numeric formats, simply use a per-format width and %0*lld for all of
them.
this width specifier is not for use with strftime field widths; that
will be a separate step in the caller.
make __strftime_fmt_1 return a string (possibly in the caller-provided
temp buffer) rather than writing into the output buffer. this approach
makes more sense when padding to a minimum field width might be
required, and it's also closer to what wcsftime wants.
one place where semicolon (non-portable) was still used in place of
separate -e options (copied over from an old version of this code),
and use of a literal slash in the bracket expression for the final
command, despite slash being used as the delimiter for the s command.
fesetround.c is a wrapper to do the arch independent argument
check (on archs where rounding mode is not stored in 2 bits
__fesetround still has to check its arguments)
on powerpc fe*except functions do not accept the extra invalid
flags of its fpscr register
the useless FENV_ACCESS pragma was removed from feupdateenv
the x87 exception summary (ES) and stack fault (SF) flags may be
spuriously cleared by feclearexcept using the fnclex instruction,
but these flags are not observable through libc hence maintaining
their state is not critical.
the sse and x87 rounding modes should be always the same,
the visible exception flags are the bitwise or of the two
fenv states (so it's enough to query the rounding mode or
raise exceptions on one fenv)
the historical (non-standardized) install command is really
inappropriate for installing binaries/libraries on a system that
utilizes memory-mapped executable files. rather than replacing an
existing file atomically, it overwrites the existing file. this can
cause running programs to see a partially-modified version of the
file, resulting in unpredictable behavior, or SIGBUS. a MAP_COPY mode
for mmap would get around this problem, but Linux lacks MAP_COPY.
the shell script added with this commit works around the problem by
writing temporary files and moving them into place. unlike the
historical install utility, it also support a -l option for installing
a symbolic link atomically, via the same method.
with these changes, the character set implemented as "big5" in musl is
a pure superset of cp950, the canonical "big5", and agrees with the
normative parts of Unicode. this means it has minor differences from
both hkscs and big5-2003:
- the range A2CC-A2CE maps to CJK ideographs rather than numerals,
contrary to changes made in big5-2003.
- C6CD maps to a CJK ideograph rather than its corresponding Kangxi
radical character, contrary to changes made in hkscs.
- F9FE maps to U+2593 rather than U+FFED.
of these differences, none but the last are visually distinct, and the
last is a character used purely for text-based graphics, not to convey
linguistic content.
should there be future demand for strict conformance to big5-2003 or
hkscs mappings, the present charset aliases can be replaced with
distinct variants.
reportedly there are other non-standard big5 extensions in common use
in Taiwan and perhaps elsewhere, which could also be added as layers
on top of the existing big5 support.
there may be additional characters which should be added to the hkscs
table: the whatwg standard for big5 defines what appears to be a
superset of hkscs.
ln -sf is non-atomic; it unlinks the destination first. instead, make
a temporary link and rename it into place.
this commit also fixes some of the dependency tracking behavior for
the link. depending on the directory it's to be installed in is not
reasonable; it causes a new link to be attempted if the library
directory has been modified, but does not attempt to make a new link
just because libc has been updated. instead, depend on the target to
be linked to. this will ensure that, if prefix has changed but
syslibdir has not, the link will be updated to point to the new
prefix.
it turns out that __SOFTFP__ does not indicate the ABI in use but
rather that fpu instructions are not to be used at all. this is
specified in ARM's documentation so I'm unclear on how I previously
got the wrong idea. unfortunately, this resulted in the 0.9.12 release
producing a dynamic linker with the wrong name. fortunately, there do
not yet seem to be any public toolchain builds using the wrong name.
the __ARM_PCS_VFP macro does not seem to be official from ARM, and in
fact it was missing from the very earliest gcc versions (around 4.5.x)
that added -mfloat-abi=hard. it would be possible on such versions to
perform some ugly linker-based tests instead in hopes that the linker
will reject ABI-mismatching object files, if there is demand for
supporting such versions. I would probably prefer to document which
versions are broken and warn users to manually add -D__ARM_PCS_VFP if
using such a version.
there's definitely an argument to be made that the fenv macros should
be exposed even in -mfloat-abi=softfp mode. for now, I have chosen not
to expose them in this case, since the math library will not
necessarily have the capability to raise exceptions (it depends on the
CFLAGS used to compile it), and since exceptions are officially
excluded from the ARM EABI, which the plain "arm" arch aims to
follow.
without these, calls may be resolved incorrectly if the calling code
has been compiled to thumb instead of arm. it's not clear to me at
this point whether crt_arch.h is even working if crt1.c is built as
thumb; this needs testing. but the _init and _fini issues were known
to cause crashes in static-linked apps when libc was built as thumb,
and this commit should fix that issue.
if FLT_EVAL_METHOD!=0 check if (double)(1/x) is subnormal and not a
power of 2 (if 1/x is power of 2 then either it is exact or the
long double to double rounding already raised inexact and underflow)
* remove volatile hacks
* don't care about inexact flag for now (removed all the +-tiny)
* fix atanl to raise underflow properly
* remove signed int arithmetics
* use pi/2 instead of pi_o_2 (gcc generates the same code, which is not
correct, but it does not matter: we mainly care about nearest rounding)
underflow is raised by an inexact subnormal float store,
since subnormal operations are slow, check the underflow
flag and skip the store if it's already raised
for these functions f(x)=x for small inputs, because f(0)=0 and
f'(0)=1, but for subnormal values they should raise the underflow
flag (required by annex F), if they are approximated by a polynomial
around 0 then spurious underflow should be avoided (not required by
annex F)
all these functions should raise inexact flag for small x if x!=0,
but it's not required by the standard and it does not seem a worthy
goal, so support for it is removed in some cases.
raising underflow:
- x*x may not raise underflow for subnormal x if FLT_EVAL_METHOD!=0
- x*x may raise spurious underflow for normal x if FLT_EVAL_METHOD==0
- in case of double subnormal x, store x as float
- in case of float subnormal x, store x*x as float
there are two possible points where the length is evaluated: either
the first 'compression' jump, or the null terminator if no jumps have
taken place yet. the previous code only measured the length of the
first component.
the duplicate code in dn_expand and its incorrect return values are
both results of the history of the code: the version in __dns.c was
originally written with no awareness of the legacy resolver API, and
was later copy-and-paste duplicated to provide the legacy API.
this commit is the first of a series that will restructure the
internal dns code to share as much code as possible with the legacy
resolver API functions.
I have also removed the loop detection logic, since the output buffer
length limit naturally prevents loops. in order to avoid long runtime
when encountering a loop if the caller provided a ridiculously long
buffer, the caller-provided length is clamped at the maximum dns name
length.
the approach of this implementation was heavily investigated prior to
adopting it. attempts to obtain similar performance with pure C code
were capping out at about 75% of the performance of the asm, with
considerably larger code size, and were fragile in that the compiler
would sometimes compile part of memcpy into a call to itself.
therefore, just using the asm seems to be the best option.
this commit is the first to make use of the new subarch-specific asm
framework. the new armel directory is the location for arm asm that
should not be used for all arm subarchs, only the default one. armhf
is the name of the little-endian hardfloat-ABI subarch, which can use
the exact same asm. in both cases, the build system finds the asm by
following a memcpy.sub file.
the other two subarchs, armeb and armebhf, would need a big-endian
variant of this code. it would not be hard to adapt the code to big
endian, but I will hold off on doing so until there is demand for it.
instead of subarchs getting their own .s files which are used directly
by the makefile to replace the .c file, they now must provide a .sub
file whose contents are a pathname, relative to the location of the
.sub file, which will substitute for the .c file. essentially these
files are acting as symbolic links, but implemented as text files.
these aliases were originally intended to be for ABI compatibility
only, but their presence caused regressions in broken gnulib-based
software whose configure scripts detect the existing of these
functions then use them without declarations, resulting in bogus
return values.
the default subarch is the one whose full name is just the base arch
name, with no suffixes. normally, either the asm in the default
subarch is suitable for all subarch variants, or separate asm is
mandatory for each variant. however, in the case of asm which is
purely for optimization purposes, it's possible to have asm that only
works (or only performs well) on the default subarch, and not any othe
the other variants. thus, I have added a mechanism to give a name to
the default variant, for example "armel" for the default,
little-endian arm. further such default-subarch names can be added in
the future as needed.
a mips signal mask contains 128 bits, enough for signals 1 through
128. however, the exit status obtained from the wait-family functions
only has room for values up to 127. reportedly signal 128 was causing
kernelspace bugs, so it was removed from the kernel recently; even
without that issue, however, it was impossible to support it correctly
in userspace.
at the same time, the bug was masked on musl by SIGRTMAX incorrectly
yielding 64 on mips, rather than the "correct" value of 128. now that
the _NSIG issue is fixed, SIGRTMAX can be fixed at the same time,
exposing the full range of signals for application use.
note that the (nonstandardized) libc _NSIG value is actually one
greater than the max signal number, and also one greater than the
kernel headers' idea of _NSIG. this is the reason for the discrepency
with the recent kernel changes. since reducing _NSIG by one brought it
down from 129 to 128, rather than from 128 to 127, _NSIG/8, used
widely in the musl sources, is unchanged.
mips has signal numbers up to 127 (formerly, up to 128, but the last
one never worked right and caused kernel panic when used), so 127 in
the "signal number" field of the wait status is insufficient for
determining that the process was stopped. in addition, a nonzero value
in the upper bits must be present, indicating the signal number which
caused the process to be stopped.
details on this issue can be seen in the email with message id
CAAG0J9-d4BfEhbQovFqUAJ3QoOuXScrpsY1y95PrEPxA5DWedQ@mail.gmail.com on
the linux-mips mailing list, archived at:
http://www.linux-mips.org/archives/linux-mips/2013-06/msg00552.html
and in the associated thread about fixing the mips kernel bug.
commit 4a96b948687166da26a6c327e6c6733ad2336c5c fixed the
corresponding issue in uClibc, but introduced a multiple-evaluation
issue for the WIFSTOPPED macro.
for the most part, none of these issues affected pure musl systems,
since musl has up until now (incorrectly) defined SIGRTMAX as 64 on
all archs, even mips. however, interpreting status of non-musl
programs on mips may have caused problems. with this change, the full
range of signal numbers can be made available on mips.
this first commit just includes the CPU_* and sched_* interfaces, not
the pthread_* interfaces, which may be added later. simple
sanity-check testing has been done for the basic interfaces, but most
of the macros have not yet been tested.
