RepoMirrors
/
musl
mirror of git://git.musl-libc.org/musl
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
musl/arch/arm/bits/syscall.h.in

364 lines
9.4 KiB
C
Raw Normal View History

initial commit of the arm port this port assumes eabi calling conventions, eabi linux syscall convention, and presence of the kernel helpers at 0xffff0f?0 needed for threads support. otherwise it makes very few assumptions, and the code should work even on armv4 without thumb support, as well as on systems with thumb interworking. the bits headers declare this a little endian system, but as far as i can tell the code should work equally well on big endian. some small details are probably broken; so far, testing has been limited to qemu/aboriginal linux.
2011-09-18 20:44:54 +00:00
#define __NR_restart_syscall 0
#define __NR_exit 1
#define __NR_fork 2
#define __NR_read 3
#define __NR_write 4
#define __NR_open 5
#define __NR_close 6
#define __NR_creat 8
#define __NR_link 9
#define __NR_unlink 10
#define __NR_execve 11
#define __NR_chdir 12
#define __NR_mknod 14
#define __NR_chmod 15
#define __NR_lchown 16
#define __NR_lseek 19
#define __NR_getpid 20
#define __NR_mount 21
#define __NR_setuid 23
#define __NR_getuid 24
#define __NR_ptrace 26
#define __NR_pause 29
#define __NR_access 33
#define __NR_nice 34
#define __NR_sync 36
#define __NR_kill 37
#define __NR_rename 38
#define __NR_mkdir 39
#define __NR_rmdir 40
#define __NR_dup 41
#define __NR_pipe 42
#define __NR_times 43
#define __NR_brk 45
#define __NR_setgid 46
#define __NR_getgid 47
#define __NR_geteuid 49
#define __NR_getegid 50
#define __NR_acct 51
#define __NR_umount2 52
#define __NR_ioctl 54
#define __NR_fcntl 55
#define __NR_setpgid 57
#define __NR_umask 60
#define __NR_chroot 61
#define __NR_ustat 62
#define __NR_dup2 63
#define __NR_getppid 64
#define __NR_getpgrp 65
#define __NR_setsid 66
#define __NR_sigaction 67
#define __NR_setreuid 70
#define __NR_setregid 71
#define __NR_sigsuspend 72
#define __NR_sigpending 73
#define __NR_sethostname 74
#define __NR_setrlimit 75
#define __NR_getrusage 77
#define __NR_gettimeofday 78
#define __NR_settimeofday 79
#define __NR_getgroups 80
#define __NR_setgroups 81
#define __NR_symlink 83
#define __NR_readlink 85
#define __NR_uselib 86
#define __NR_swapon 87
#define __NR_reboot 88
#define __NR_munmap 91
#define __NR_truncate 92
#define __NR_ftruncate 93
#define __NR_fchmod 94
#define __NR_fchown 95
#define __NR_getpriority 96
#define __NR_setpriority 97
#define __NR_statfs 99
#define __NR_fstatfs 100
#define __NR_syslog 103
#define __NR_setitimer 104
#define __NR_getitimer 105
#define __NR_stat 106
#define __NR_lstat 107
#define __NR_fstat 108
#define __NR_vhangup 111
#define __NR_wait4 114
#define __NR_swapoff 115
#define __NR_sysinfo 116
#define __NR_fsync 118
#define __NR_sigreturn 119
#define __NR_clone 120
#define __NR_setdomainname 121
#define __NR_uname 122
#define __NR_adjtimex 124
#define __NR_mprotect 125
#define __NR_sigprocmask 126
#define __NR_init_module 128
#define __NR_delete_module 129
#define __NR_quotactl 131
#define __NR_getpgid 132
#define __NR_fchdir 133
#define __NR_bdflush 134
#define __NR_sysfs 135
#define __NR_personality 136
#define __NR_setfsuid 138
#define __NR_setfsgid 139
#define __NR__llseek 140
#define __NR_getdents 141
#define __NR__newselect 142
#define __NR_flock 143
#define __NR_msync 144
#define __NR_readv 145
#define __NR_writev 146
#define __NR_getsid 147
#define __NR_fdatasync 148
#define __NR__sysctl 149
#define __NR_mlock 150
#define __NR_munlock 151
#define __NR_mlockall 152
#define __NR_munlockall 153
#define __NR_sched_setparam 154
#define __NR_sched_getparam 155
#define __NR_sched_setscheduler 156
#define __NR_sched_getscheduler 157
#define __NR_sched_yield 158
#define __NR_sched_get_priority_max 159
#define __NR_sched_get_priority_min 160
#define __NR_sched_rr_get_interval 161
#define __NR_nanosleep 162
#define __NR_mremap 163
#define __NR_setresuid 164
#define __NR_getresuid 165
#define __NR_poll 168
#define __NR_nfsservctl 169
#define __NR_setresgid 170
#define __NR_getresgid 171
#define __NR_prctl 172
#define __NR_rt_sigreturn 173
#define __NR_rt_sigaction 174
#define __NR_rt_sigprocmask 175
#define __NR_rt_sigpending 176
#define __NR_rt_sigtimedwait 177
#define __NR_rt_sigqueueinfo 178
#define __NR_rt_sigsuspend 179
#define __NR_pread64 180
#define __NR_pwrite64 181
#define __NR_chown 182
#define __NR_getcwd 183
#define __NR_capget 184
#define __NR_capset 185
#define __NR_sigaltstack 186
#define __NR_sendfile 187
#define __NR_vfork 190
#define __NR_ugetrlimit 191
#define __NR_mmap2 192
#define __NR_truncate64 193
#define __NR_ftruncate64 194
#define __NR_stat64 195
#define __NR_lstat64 196
#define __NR_fstat64 197
#define __NR_lchown32 198
#define __NR_getuid32 199
#define __NR_getgid32 200
#define __NR_geteuid32 201
#define __NR_getegid32 202
#define __NR_setreuid32 203
#define __NR_setregid32 204
#define __NR_getgroups32 205
#define __NR_setgroups32 206
#define __NR_fchown32 207
#define __NR_setresuid32 208
#define __NR_getresuid32 209
#define __NR_setresgid32 210
#define __NR_getresgid32 211
#define __NR_chown32 212
#define __NR_setuid32 213
#define __NR_setgid32 214
#define __NR_setfsuid32 215
#define __NR_setfsgid32 216
#define __NR_getdents64 217
#define __NR_pivot_root 218
#define __NR_mincore 219
#define __NR_madvise 220
#define __NR_fcntl64 221
#define __NR_gettid 224
#define __NR_readahead 225
#define __NR_setxattr 226
#define __NR_lsetxattr 227
#define __NR_fsetxattr 228
#define __NR_getxattr 229
#define __NR_lgetxattr 230
#define __NR_fgetxattr 231
#define __NR_listxattr 232
#define __NR_llistxattr 233
#define __NR_flistxattr 234
#define __NR_removexattr 235
#define __NR_lremovexattr 236
#define __NR_fremovexattr 237
#define __NR_tkill 238
#define __NR_sendfile64 239
#define __NR_futex 240
#define __NR_sched_setaffinity 241
#define __NR_sched_getaffinity 242
#define __NR_io_setup 243
#define __NR_io_destroy 244
#define __NR_io_getevents 245
#define __NR_io_submit 246
#define __NR_io_cancel 247
#define __NR_exit_group 248
#define __NR_lookup_dcookie 249
#define __NR_epoll_create 250
#define __NR_epoll_ctl 251
#define __NR_epoll_wait 252
#define __NR_remap_file_pages 253
#define __NR_set_tid_address 256
#define __NR_timer_create 257
#define __NR_timer_settime 258
#define __NR_timer_gettime 259
#define __NR_timer_getoverrun 260
#define __NR_timer_delete 261
#define __NR_clock_settime 262
#define __NR_clock_gettime 263
#define __NR_clock_getres 264
#define __NR_clock_nanosleep 265
#define __NR_statfs64 266
#define __NR_fstatfs64 267
#define __NR_tgkill 268
#define __NR_utimes 269
#define __NR_fadvise64_64 270
make syscall.h consistent with linux most of the found naming differences don't matter to musl, because internally it unifies the syscall names that vary across targets, but for external code the names should match the kernel uapi. aarch64: __NR_fstatat is called __NR_newfstatat in linux. __NR_or1k_atomic got mistakenly copied from or1k. arm: __NR_arm_sync_file_range is an alias for __NR_sync_file_range2 __NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux, the old non-arm name is kept too, it should not cause issues. (powerpc has similar nonstandard fadvise and it uses the normal name.) i386: __NR_madvise1 was removed from linux in commit 303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11 microblaze: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite had different name in linux. mips: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select had different name in linux. mipsn32: __NR_fstatat is called __NR_newfstatat in linux. or1k: __NR__llseek is called __NR_llseek in linux. the old name is kept too because that's the name musl uses internally. powerpc: __NR_{get,set}res{gid,uid}32 was never present in powerpc linux. __NR_timerfd was briefly defined in linux but then got renamed.
2017-02-18 00:50:09 +00:00
#define __NR_arm_fadvise64_64 270
initial commit of the arm port this port assumes eabi calling conventions, eabi linux syscall convention, and presence of the kernel helpers at 0xffff0f?0 needed for threads support. otherwise it makes very few assumptions, and the code should work even on armv4 without thumb support, as well as on systems with thumb interworking. the bits headers declare this a little endian system, but as far as i can tell the code should work equally well on big endian. some small details are probably broken; so far, testing has been limited to qemu/aboriginal linux.
2011-09-18 20:44:54 +00:00
#define __NR_pciconfig_iobase 271
#define __NR_pciconfig_read 272
#define __NR_pciconfig_write 273
#define __NR_mq_open 274
#define __NR_mq_unlink 275
#define __NR_mq_timedsend 276
#define __NR_mq_timedreceive 277
#define __NR_mq_notify 278
#define __NR_mq_getsetattr 279
#define __NR_waitid 280
#define __NR_socket 281
#define __NR_bind 282
#define __NR_connect 283
#define __NR_listen 284
#define __NR_accept 285
#define __NR_getsockname 286
#define __NR_getpeername 287
#define __NR_socketpair 288
#define __NR_send 289
#define __NR_sendto 290
#define __NR_recv 291
#define __NR_recvfrom 292
#define __NR_shutdown 293
#define __NR_setsockopt 294
#define __NR_getsockopt 295
#define __NR_sendmsg 296
#define __NR_recvmsg 297
#define __NR_semop 298
#define __NR_semget 299
#define __NR_semctl 300
#define __NR_msgsnd 301
#define __NR_msgrcv 302
#define __NR_msgget 303
#define __NR_msgctl 304
#define __NR_shmat 305
#define __NR_shmdt 306
#define __NR_shmget 307
#define __NR_shmctl 308
#define __NR_add_key 309
#define __NR_request_key 310
#define __NR_keyctl 311
#define __NR_semtimedop 312
#define __NR_vserver 313
#define __NR_ioprio_set 314
#define __NR_ioprio_get 315
#define __NR_inotify_init 316
#define __NR_inotify_add_watch 317
#define __NR_inotify_rm_watch 318
#define __NR_mbind 319
#define __NR_get_mempolicy 320
#define __NR_set_mempolicy 321
#define __NR_openat 322
#define __NR_mkdirat 323
#define __NR_mknodat 324
#define __NR_fchownat 325
#define __NR_futimesat 326
#define __NR_fstatat64 327
#define __NR_unlinkat 328
#define __NR_renameat 329
#define __NR_linkat 330
#define __NR_symlinkat 331
#define __NR_readlinkat 332
#define __NR_fchmodat 333
#define __NR_faccessat 334
#define __NR_pselect6 335
#define __NR_ppoll 336
#define __NR_unshare 337
#define __NR_set_robust_list 338
#define __NR_get_robust_list 339
#define __NR_splice 340
#define __NR_sync_file_range2 341
make syscall.h consistent with linux most of the found naming differences don't matter to musl, because internally it unifies the syscall names that vary across targets, but for external code the names should match the kernel uapi. aarch64: __NR_fstatat is called __NR_newfstatat in linux. __NR_or1k_atomic got mistakenly copied from or1k. arm: __NR_arm_sync_file_range is an alias for __NR_sync_file_range2 __NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux, the old non-arm name is kept too, it should not cause issues. (powerpc has similar nonstandard fadvise and it uses the normal name.) i386: __NR_madvise1 was removed from linux in commit 303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11 microblaze: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite had different name in linux. mips: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select had different name in linux. mipsn32: __NR_fstatat is called __NR_newfstatat in linux. or1k: __NR__llseek is called __NR_llseek in linux. the old name is kept too because that's the name musl uses internally. powerpc: __NR_{get,set}res{gid,uid}32 was never present in powerpc linux. __NR_timerfd was briefly defined in linux but then got renamed.
2017-02-18 00:50:09 +00:00
#define __NR_arm_sync_file_range 341
initial commit of the arm port this port assumes eabi calling conventions, eabi linux syscall convention, and presence of the kernel helpers at 0xffff0f?0 needed for threads support. otherwise it makes very few assumptions, and the code should work even on armv4 without thumb support, as well as on systems with thumb interworking. the bits headers declare this a little endian system, but as far as i can tell the code should work equally well on big endian. some small details are probably broken; so far, testing has been limited to qemu/aboriginal linux.
2011-09-18 20:44:54 +00:00
#define __NR_tee 342
#define __NR_vmsplice 343
#define __NR_move_pages 344
#define __NR_getcpu 345
#define __NR_epoll_pwait 346
#define __NR_kexec_load 347
#define __NR_utimensat 348
#define __NR_signalfd 349
#define __NR_timerfd_create 350
#define __NR_eventfd 351
#define __NR_fallocate 352
#define __NR_timerfd_settime 353
#define __NR_timerfd_gettime 354
#define __NR_signalfd4 355
#define __NR_eventfd2 356
#define __NR_epoll_create1 357
#define __NR_dup3 358
#define __NR_pipe2 359
#define __NR_inotify_init1 360
#define __NR_preadv 361
#define __NR_pwritev 362
#define __NR_rt_tgsigqueueinfo 363
#define __NR_perf_event_open 364
#define __NR_recvmmsg 365
#define __NR_accept4 366
#define __NR_fanotify_init 367
#define __NR_fanotify_mark 368
#define __NR_prlimit64 369
#define __NR_name_to_handle_at 370
#define __NR_open_by_handle_at 371
#define __NR_clock_adjtime 372
#define __NR_syncfs 373
#define __NR_sendmmsg 374
#define __NR_setns 375
update syscall defs to latest kernel ones patch submitted by Kristian L. <email@thexception.net>
2012-06-24 01:16:44 +00:00
#define __NR_process_vm_readv 376
#define __NR_process_vm_writev 377
add syscall numbers for the new kcmp and finit_module syscalls and remove syscall todos from microblaze
2013-04-01 18:02:32 +00:00
#define __NR_kcmp 378
#define __NR_finit_module 379
add sched_{get,set}attr syscall numbers and SCHED_DEADLINE macro linux 3.14 introduced sched_getattr and sched_setattr syscalls in commit d50dde5a10f305253cbc3855307f608f8a3c5f73 and the related SCHED_DEADLINE scheduling policy in commit aab03e05e8f7e26f51dee792beddcb5cca9215a5 but struct sched_attr "extended scheduling parameters data structure" is not yet exported to userspace (necessary for using the syscalls) so related uapi definitions are not added yet.
2014-05-30 11:47:44 +00:00
#define __NR_sched_setattr 380
#define __NR_sched_getattr 381
add syscall numbers for the new renameat2 syscall it's like rename but with flags eg. to allow atomic exchange of two files, introduced in linux 3.15 commit 520c8b16505236fc82daa352e6c5e73cd9870cff
2014-07-20 13:43:42 +00:00
#define __NR_renameat2 382
add new syscall numbers for seccomp, getrandom, memfd_create these syscalls are new in linux v3.17 and present on all supported archs except sh. seccomp was added in commit 48dc92b9fc3926844257316e75ba11eb5c742b2c it has operation, flags and pointer arguments (if flags==0 then it is the same as prctl(PR_SET_SECCOMP,...)), the uapi header for flag definitions is linux/seccomp.h getrandom was added in commit c6e9d6f38894798696f23c8084ca7edbf16ee895 it provides an entropy source when open("/dev/urandom",..) would fail, the uapi header for flags is linux/random.h memfd_create was added in commit 9183df25fe7b194563db3fec6dc3202a5855839c it allows anon mmap to have an fd, that can be shared, sealed and needs no mount point, the uapi header for flags is linux/memfd.h
2014-10-01 19:41:47 +00:00
#define __NR_seccomp 383
#define __NR_getrandom 384
#define __NR_memfd_create 385
add new syscall numbers for bpf and kexec_file_load these syscalls are new in linux v3.18, bpf is present on all supported archs except sh, kexec_file_load is only allocted for x86_64 and x32 yet. bpf was added in linux commit 99c55f7d47c0dc6fc64729f37bf435abf43f4c60 kexec_file_load syscall number was allocated in commit f0895685c7fd8c938c91a9d8a6f7c11f22df58d2
2014-12-15 23:20:36 +00:00
#define __NR_bpf 386
add syscall numbers for the new execveat syscall this syscall allows fexecve to be implemented without /proc, it is new in linux v3.19, added in commit 51f39a1f0cea1cacf8c787f652f26dfee9611874 (sh and microblaze do not have allocated syscall numbers yet) added a x32 fix as well: the io_setup and io_submit syscalls are no longer common with x86_64, so use the x32 specific numbers.
2015-02-09 21:53:20 +00:00
#define __NR_execveat 387
add new membarrier, userfaultfd and switch_endian syscalls new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc, x32 and x86_64. membarrier is a system wide memory barrier, moves most of the synchronization cost to one side, new in kernel commit 5b25b13ab08f616efd566347d809b4ece54570d1 userfaultfd is useful for qemu and is new in kernel commit 8d2afd96c20316d112e04d935d9e09150e988397 switch_endian is powerpc only for switching endianness, new in commit 529d235a0e190ded1d21ccc80a73e625ebcad09b
2015-11-18 23:31:37 +00:00
#define __NR_userfaultfd 388
#define __NR_membarrier 389
add mlock2 syscall number from linux v4.4 this is mlock with a flags argument, new in linux commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e as usual microblaze and sh don't have allocated syscall number yet.
2016-01-23 23:16:14 +00:00
#define __NR_mlock2 390
add copy_file_range syscall numbers from linux v4.5 it was introduced for offloading copying between regular files in linux commit 29732938a6289a15e907da234d6692a2ead71855 (microblaze and sh does not yet have the syscall number.)
2016-03-19 12:35:43 +00:00
#define __NR_copy_file_range 391
add preadv2 and pwritev2 syscall numbers for linux v4.6 the syscalls take an additional flag argument, they were added in commit f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09. the syscall is not allocated for microblaze and sh yet.
2016-05-26 20:04:56 +00:00
#define __NR_preadv2 392
#define __NR_pwritev2 393
add pkey_{mprotect,alloc,free} syscalls from linux v4.9 see linux commit e8c24d3a23a469f1f40d4de24d872ca7023ced0a and linux Documentation/x86/protection-keys.txt
2016-12-25 09:41:06 +00:00
#define __NR_pkey_mprotect 394
#define __NR_pkey_alloc 395
#define __NR_pkey_free 396
add statx syscall numbers from linux v4.11 statx was added in linux commit a528d35e8bfcc521d7cb70aaf03e1bd296c8493f (there is no libc wrapper yet and microblaze and sh misses the number).
2017-07-09 19:22:31 +00:00
#define __NR_statx 397
initial commit of the arm port this port assumes eabi calling conventions, eabi linux syscall convention, and presence of the kernel helpers at 0xffff0f?0 needed for threads support. otherwise it makes very few assumptions, and the code should work even on armv4 without thumb support, as well as on systems with thumb interworking. the bits headers declare this a little endian system, but as far as i can tell the code should work equally well on big endian. some small details are probably broken; so far, testing has been limited to qemu/aboriginal linux.
2011-09-18 20:44:54 +00:00
add arm private syscall numbers it is part of kernel uapi, and some programs (e.g. nodejs) do use them
2014-12-03 14:09:37 +00:00
#define __ARM_NR_breakpoint 0x0f0001
#define __ARM_NR_cacheflush 0x0f0002
#define __ARM_NR_usr26 0x0f0003
#define __ARM_NR_usr32 0x0f0004
#define __ARM_NR_set_tls 0x0f0005
arm: add get_tls syscall from linux v4.15 for systems without tp register or kuser helper, new in linux commit 8fcd6c45f5a65621ec809b7866a3623e9a01d4ed
2018-02-02 20:42:27 +00:00
#define __ARM_NR_get_tls 0x0f0006
initial commit of the arm port this port assumes eabi calling conventions, eabi linux syscall convention, and presence of the kernel helpers at 0xffff0f?0 needed for threads support. otherwise it makes very few assumptions, and the code should work even on armv4 without thumb support, as well as on systems with thumb interworking. the bits headers declare this a little endian system, but as far as i can tell the code should work equally well on big endian. some small details are probably broken; so far, testing has been limited to qemu/aboriginal linux.
2011-09-18 20:44:54 +00:00