RepoMirrors
/
musl
mirror of git://git.musl-libc.org/musl
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
musl/arch/mips/reloc.h

47 lines
1.1 KiB
C
Raw Normal View History

make the dynamic linker find its path file relative to its own location prior to this change, using a non-default syslibdir was impractical on systems where the ordinary library paths contain musl-incompatible library files. the file containing search paths was always taken from /etc, which would either correspond to a system-wide musl installation, or fail to exist at all, resulting in searching of the default library path. the new search strategy is safe even for suid programs because the pathname used comes from the PT_INTERP header of the program being run, rather than any external input. as part of this change, I have also begun differentiating the names of arch variants that differ by endianness or floating point calling convention. the corresponding changes in the build system and and gcc wrapper script (to use an alternate dynamic linker name) for these configurations have not yet been made.
2013-07-18 23:29:44 +00:00
#include <endian.h>
initial version of mips (o32) port, based on work by Richard Pennington (rdp) basically, this version of the code was obtained by starting with rdp's work from his ellcc source tree, adapting it to musl's build system and coding style, auditing the bits headers for discrepencies with kernel definitions or glibc/LSB ABI or large file issues, fixing up incompatibility with the old binutils from aboriginal linux, and adding some new special cases to deal with the oddities of sigaction and pipe syscall interfaces on mips. at present, minimal test programs work, but some interfaces are broken or missing. threaded programs probably will not link.
2012-07-11 08:22:13 +00:00
make the dynamic linker find its path file relative to its own location prior to this change, using a non-default syslibdir was impractical on systems where the ordinary library paths contain musl-incompatible library files. the file containing search paths was always taken from /etc, which would either correspond to a system-wide musl installation, or fail to exist at all, resulting in searching of the default library path. the new search strategy is safe even for suid programs because the pathname used comes from the PT_INTERP header of the program being run, rather than any external input. as part of this change, I have also begun differentiating the names of arch variants that differ by endianness or floating point calling convention. the corresponding changes in the build system and and gcc wrapper script (to use an alternate dynamic linker name) for these configurations have not yet been made.
2013-07-18 23:29:44 +00:00
#if __BYTE_ORDER == __LITTLE_ENDIAN
#define ENDIAN_SUFFIX "el"
#else
#define ENDIAN_SUFFIX ""
#endif
mips: add mips-sf subarch support (soft-float) Userspace emulated floating-point (gcc -msoft-float) is not compatible with the default mips abi (assumes an FPU or in kernel emulation of it). Soft vs hard float abi should not be mixed, __mips_soft_float is checked in musl's configure script and there is no runtime check. The -sf subarch does not save/restore floating-point registers in setjmp/longjmp and only provides dummy fenv implementation.
2014-02-24 22:16:29 +00:00
#ifdef __mips_soft_float
#define FP_SUFFIX "-sf"
#else
#define FP_SUFFIX ""
#endif
#define LDSO_ARCH "mips" ENDIAN_SUFFIX FP_SUFFIX
initial version of mips (o32) port, based on work by Richard Pennington (rdp) basically, this version of the code was obtained by starting with rdp's work from his ellcc source tree, adapting it to musl's build system and coding style, auditing the bits headers for discrepencies with kernel definitions or glibc/LSB ABI or large file issues, fixing up incompatibility with the old binutils from aboriginal linux, and adding some new special cases to deal with the oddities of sigaction and pipe syscall interfaces on mips. at present, minimal test programs work, but some interfaces are broken or missing. threaded programs probably will not link.
2012-07-11 08:22:13 +00:00
refactor to remove arch-specific relocation code from dynamic linker this was one of the main instances of ugly code duplication: all archs use basically the same types of relocations, but roughly equivalent logic was duplicated for each arch to account for the different naming and numbering of relocation types and variation in whether REL or RELA records are used. as an added bonus, both REL and RELA are now supported on all archs, regardless of which is used by the standard toolchain.
2014-06-18 06:44:02 +00:00
#define TPOFF_K (-0x7000)
initial version of mips (o32) port, based on work by Richard Pennington (rdp) basically, this version of the code was obtained by starting with rdp's work from his ellcc source tree, adapting it to musl's build system and coding style, auditing the bits headers for discrepencies with kernel definitions or glibc/LSB ABI or large file issues, fixing up incompatibility with the old binutils from aboriginal linux, and adding some new special cases to deal with the oddities of sigaction and pipe syscall interfaces on mips. at present, minimal test programs work, but some interfaces are broken or missing. threaded programs probably will not link.
2012-07-11 08:22:13 +00:00
dynamic linker bootstrap overhaul this overhaul further reduces the amount of arch-specific code needed by the dynamic linker and removes a number of assumptions, including: - that symbolic function references inside libc are bound at link time via the linker option -Bsymbolic-functions. - that libc functions used by the dynamic linker do not require access to data symbols. - that static/internal function calls and data accesses can be made without performing any relocations, or that arch-specific startup code handled any such relocations needed. removing these assumptions paves the way for allowing libc.so itself to be built with stack protector (among other things), and is achieved by a three-stage bootstrap process: 1. relative relocations are processed with a flat function. 2. symbolic relocations are processed with no external calls/data. 3. main program and dependency libs are processed with a fully-functional libc/ldso. reduction in arch-specific code is achived through the following: - crt_arch.h, used for generating crt1.o, now provides the entry point for the dynamic linker too. - asm is no longer responsible for skipping the beginning of argv[] when ldso is invoked as a command. - the functionality previously provided by __reloc_self for heavily GOT-dependent RISC archs is now the arch-agnostic stage-1. - arch-specific relocation type codes are mapped directly as macros rather than via an inline translation function/switch statement.
2015-04-13 06:56:26 +00:00
#define REL_SYM_OR_REL R_MIPS_REL32
#define REL_PLT R_MIPS_JUMP_SLOT
#define REL_COPY R_MIPS_COPY
#define REL_DTPMOD R_MIPS_TLS_DTPMOD32
#define REL_DTPOFF R_MIPS_TLS_DTPREL32
#define REL_TPOFF R_MIPS_TLS_TPREL32
mips dynamic linker support not heavily tested, but the basics are working. the basic concept is that the dynamic linker entry point code invokes a pure-PIC (no global accesses) C function in reloc.h to perform the early GOT relocations needed to make the dynamic linker itself functional, then invokes __dynlink like on other archs. since mips uses some ugly arch-specific hacks to optimize relocating the GOT (rather than just using the normal DT_REL[A] tables like on other archs), the dynamic linker has been modified slightly to support calling arch-specific relocation code in reloc.h. most of the actual mips-specific behavior was developed by reading the output of readelf on libc.so and simple executable files. i could not find good reference information on which relocation types need to be supported or their semantics, so it's possible that some legitimate usage cases will not work yet.
2012-08-05 16:50:26 +00:00
dynamic linker bootstrap overhaul this overhaul further reduces the amount of arch-specific code needed by the dynamic linker and removes a number of assumptions, including: - that symbolic function references inside libc are bound at link time via the linker option -Bsymbolic-functions. - that libc functions used by the dynamic linker do not require access to data symbols. - that static/internal function calls and data accesses can be made without performing any relocations, or that arch-specific startup code handled any such relocations needed. removing these assumptions paves the way for allowing libc.so itself to be built with stack protector (among other things), and is achieved by a three-stage bootstrap process: 1. relative relocations are processed with a flat function. 2. symbolic relocations are processed with no external calls/data. 3. main program and dependency libs are processed with a fully-functional libc/ldso. reduction in arch-specific code is achived through the following: - crt_arch.h, used for generating crt1.o, now provides the entry point for the dynamic linker too. - asm is no longer responsible for skipping the beginning of argv[] when ldso is invoked as a command. - the functionality previously provided by __reloc_self for heavily GOT-dependent RISC archs is now the arch-agnostic stage-1. - arch-specific relocation type codes are mapped directly as macros rather than via an inline translation function/switch statement.
2015-04-13 06:56:26 +00:00
#define NEED_MIPS_GOT_RELOCS 1
ldso: fix GDB dynamic linker info on MIPS GDB is looking for a pointer to the ldso debug info in the data of the ..rld_map section. Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2016-01-30 20:14:05 +00:00
#define DT_DEBUG_INDIRECT DT_MIPS_RLD_MAP
fix regression in mips dynamic linker this issue caused the address of functions in shared libraries to resolve to their PLT thunks in the main program rather than their correct addresses. it was observed causing crashes, though the mechanism of the crash was not thoroughly investigated. since the issue is very subtle, it calls for some explanation: on all well-behaved archs, GOT entries that belong to the PLT use a special relocation type, typically called JMP_SLOT, so that the dynamic linker can avoid having the jump destinations for the PLT resolve to PLT thunks themselves (they also provide a definition for the symbol, which must be used whenever the address of the function is taken so that all DSOs see the same address). however, the traditional mips PIC ABI lacked such a JMP_SLOT relocation type, presumably because, due to the way PIC works, the address of the PLT thunk was never needed and could always be ignored. prior to commit adf94c19666e687a728bbf398f9a88ea4ea19996, the mips version of reloc.h contained a hack that caused all symbol lookups to be treated like JMP_SLOT, inhibiting undefined symbols from ever being used to resolve symbolic relocations. this hack goes all the way back to commit babf820180368f00742ec65b2050a82380d7c542, when the mips dynamic linker was first made usable. during the recent refactoring to eliminate arch-specific relocation processing (commit adf94c19666e687a728bbf398f9a88ea4ea19996), this hack was overlooked and no equivalent functionality was provided in the new code. fixing the problem is not as simple as adding back an equivalent hack, since there is now also a "non-PIC ABI" that can be used for the main executable, which actually does use a PLT. the closest thing to official documentation I could find for this ABI is nonpic.txt, attached to Message-ID: 20080701202236.GA1534@caradoc.them.org, which can be found in the gcc mailing list archives and elsewhere. per this document, undefined symbols corresponding to PLT thunks have the STO_MIPS_PLT bit set in the symbol's st_other field. thus, I have added an arch-specific rule for mips, applied at the find_sym level rather than the relocation level, to reject undefined symbols with the STO_MIPS_PLT bit clear. the previous hack of treating all mips relocations as JMP_SLOT-like, rather than rejecting the unwanted symbols in find_sym, probably also caused dlsym to wrongly return PLT thunks in place of the correct address of a function under at least some conditions. this should now be fixed, at least for global-scope symbol lookups.
2014-06-30 05:18:14 +00:00
#define ARCH_SYM_REJECT_UND(s) (!((s)->st_other & STO_MIPS_PLT))
dynamic linker bootstrap overhaul this overhaul further reduces the amount of arch-specific code needed by the dynamic linker and removes a number of assumptions, including: - that symbolic function references inside libc are bound at link time via the linker option -Bsymbolic-functions. - that libc functions used by the dynamic linker do not require access to data symbols. - that static/internal function calls and data accesses can be made without performing any relocations, or that arch-specific startup code handled any such relocations needed. removing these assumptions paves the way for allowing libc.so itself to be built with stack protector (among other things), and is achieved by a three-stage bootstrap process: 1. relative relocations are processed with a flat function. 2. symbolic relocations are processed with no external calls/data. 3. main program and dependency libs are processed with a fully-functional libc/ldso. reduction in arch-specific code is achived through the following: - crt_arch.h, used for generating crt1.o, now provides the entry point for the dynamic linker too. - asm is no longer responsible for skipping the beginning of argv[] when ldso is invoked as a command. - the functionality previously provided by __reloc_self for heavily GOT-dependent RISC archs is now the arch-agnostic stage-1. - arch-specific relocation type codes are mapped directly as macros rather than via an inline translation function/switch statement.
2015-04-13 06:56:26 +00:00
#define CRTJMP(pc,sp) __asm__ __volatile__( \
"move $sp,%1 ; jr %0" : : "r"(pc), "r"(sp) : "memory" )
new dlstart stage-2 chaining for mips
2015-09-17 07:20:43 +00:00
#define GETFUNCSYM(fp, sym, got) __asm__ ( \
".hidden " #sym "\n" \
".set push \n" \
".set noreorder \n" \
" bal 1f \n" \
" nop \n" \
" .gpword . \n" \
" .gpword " #sym " \n" \
"1: lw %0, ($ra) \n" \
" subu %0, $ra, %0 \n" \
" lw $ra, 4($ra) \n" \
" addu %0, %0, $ra \n" \
".set pop \n" \
: "=r"(*(fp)) : : "memory", "ra" )