RepoMirrors
/
mpv
mirror of https://github.com/mpv-player/mpv
1
0
Fork 0
Code Issues Releases Wiki Activity
mpv/DOCS/man/input.rst

1341 lines
48 KiB
ReStructuredText
Raw Blame History

INPUT.CONF
==========
The input.conf file consists of a list of key bindings, for example::
s screenshot # take a screenshot with the s key
Each line maps a key to an input command. Keys are specified with their literal
value (upper case if combined with ``Shift``), or a name for special keys. For
example, ``a`` maps to the ``a`` key without shift, and ``A`` maps to ``a``
with shift.
A list of special keys can be obtained with
``mpv --input-keylist``
In general, keys can be combined with ``Shift``, ``Ctrl`` and ``Alt``::
ctrl+q quit
**mpv** can be started in input test mode, which displays key bindings and the
commands they're bound to on the OSD, instead of executing the commands::
mpv --input-test --force-window --idle
(Only closing the window will make **mpv** exit, pressing normal keys will
merely display the binding, even if mapped to quit.)
General Input Command Syntax
----------------------------
``[Shift+][Ctrl+][Alt+][Meta+]<key> [{<section>}] [<prefixes>] <command> (<argument>)* [; <command>]``
Note that by default, the right Alt key can be used to create special
characters, and thus does not register as a modifier. The option
``--no-input-right-alt-gr`` changes this behavior.
Newlines always start a new binding. ``#`` starts a comment (outside of quoted
string arguments). To bind commands to the ``#`` key, ``SHARP`` can be used.
``<key>`` is either the literal character the key produces (ASCII or Unicode
character), or a symbolic name (as printed by ``--input-keylist``).
``<section>`` (braced with ``{`` and ``}``) is the input section for this
command.
Arguments are separated by whitespace. This applies even to string arguments.
For this reason, string arguments should be quoted with ``"``. Inside quotes,
C-style escaping can be used.
You can bind multiple commands to one key. For example:
| a show_text "command 1" ; show_text "command 2"
It's also possible to bind a command to a sequence of keys:
| a-b-c show_text "command run after a, b, c have been pressed"
(This is not shown in the general command syntax.)
If ``a`` or ``a-b`` or ``b`` are already bound, this will run the first command
that matches, and the multi-key command will never be called. Intermediate keys
can be remapped to ``ignore`` in order to avoid this issue. The maximum number
of (non-modifier) keys for combinations is currently 4.
List of Input Commands
----------------------
``ignore``
Use this to "block" keys that should be unbound, and do nothing. Useful for
disabling default bindings, without disabling all bindings with
``--no-input-default-bindings``.
``seek <seconds> [relative|absolute|absolute-percent|- [default-precise|exact|keyframes]]``
Change the playback position. By default, seeks by a relative amount of
seconds.
The second argument sets the seek mode:
relative (default)
Seek relative to current position (a negative value seeks backwards).
absolute
Seek to a given time.
absolute-percent
Seek to a given percent position.
The third argument defines how exact the seek is:
default-precise (default)
Follow the default behavior as set by ``--hr-seek``, which by default
does imprecise seeks (like ``keyframes``).
exact
Always do exact/hr/precise seeks (slow).
keyframes
Always restart playback at keyframe boundaries (fast).
``revert_seek``
Undoes the ``seek`` command, and some other commands that seek (but not
necessarily all of them). Calling this command once will jump to the
playback position before the seek. Calling it a second time undoes the
``revert_seek`` command itself.
``frame_step``
Play one frame, then pause.
``frame_back_step``
Go back by one frame, then pause. Note that this can be very slow (it tries
to be precise, not fast), and sometimes fails to behave as expected. How
well this works depends on whether precise seeking works correctly (e.g.
see the ``--hr-seek-demuxer-offset`` option). Video filters or other video
postprocessing that modifies timing of frames (e.g. deinterlacing) should
usually work, but might make backstepping silently behave incorrectly in
corner cases. Using ``--hr-seek-framedrop=no`` should help, although it
might make precise seeking slower.
This does not work with audio-only playback.
``set <property> "<value>"``
Set the given property to the given value.
``add <property> [<value>]``
Add the given value to the property. On overflow or underflow, clamp the
property to the maximum. If ``<value>`` is omitted, assume ``1``.
``cycle <property> [up|down]``
Cycle the given property. ``up`` and ``down`` set the cycle direction. On
overflow, set the property back to the minimum, on underflow set it to the
maximum. If ``up`` or ``down`` is omitted, assume ``up``.
``multiply <property> <factor>``
Multiplies the value of a property with the numeric factor.
``screenshot [subtitles|video|window|- [single|each-frame]]``
Take a screenshot.
First argument:
<subtitles> (default)
Save the video image, in its original resolution, and with subtitles.
Some video outputs may still include the OSD in the output under certain
circumstances.
<video>
Like ``subtitles``, but typically without OSD or subtitles. The exact
behavior depends on the selected video output.
<window>
Save the contents of the mpv window. Typically scaled, with OSD and
subtitles. The exact behavior depends on the selected video output, and
if no support is available, this will act like ``video``.
Second argument:
<single> (default)
Take a single screenshot.
<each-frame>
Take a screenshot each frame. Issue this command again to stop taking
screenshots.
``screenshot_to_file "<filename>" [subtitles|video|window]``
Take a screenshot and save it to a given file. The format of the file will
be guessed by the extension (and ``--screenshot-format`` is ignored - the
behavior when the extension is missing or unknown is arbitrary).
The second argument is like the first argument to ``screenshot``.
This command tries to never overwrite files. If the file already exists,
it fails.
Like all input command parameters, the filename is subject to property
expansion as described in `Property Expansion`_.
``playlist_next [weak|force]``
Go to the next entry on the playlist.
weak (default)
If the last file on the playlist is currently played, do nothing.
force
Terminate playback if there are no more files on the playlist.
``playlist_prev [weak|force]``
Go to the previous entry on the playlist.
weak (default)
If the first file on the playlist is currently played, do nothing.
force
Terminate playback if the first file is being played.
``loadfile "<file>" [replace|append [options]]``
Load the given file and play it.
Second argument:
<replace> (default)
Stop playback of the current file, and play the new file immediately.
<append>
Append the file to the playlist.
The third argument is a list of options and values which should be set
while the file is playing. It is of the form ``opt1=value1,opt2=value2,..``.
Not all options can be changed this way. Some options require a restart
of the player.
``loadlist "<playlist>" [replace|append]``
Load the given playlist file (like ``--playlist``).
``playlist_clear``
Clear the playlist, except the currently played file.
``playlist_remove current|<index>``
Remove the playlist entry at the given index. Index values start counting
with 0. The special value ``current`` removes the current entry. Note that
removing the current entry also stops playback and starts playing the next
entry.
``playlist_move <index1> <index2>``
Move the playlist entry at index1, so that it takes the place of the
entry index2. (Paradoxically, the moved playlist entry will not have
the index value index2 after moving if index1 was lower than index2,
because index2 refers to the target entry, not the index the entry
will have after moving.)
``run "command" "arg1" "arg2" ...``
(Unix only)
Run the given command. Unlike in MPlayer/mplayer2 and earlier versions of
mpv (0.2.x and older), this doesn't call the shell. Instead, the command
is run directly, with each argument passed separately. Each argument is
expanded like in `Property Expansion`_. Note that there is a static limit
of (as of this writing) 9 arguments (this limit could be raised on demand).
The program is run in a detached way. mpv doesn't wait until the command
is completed, but continues playback right after spawning it.
To get the old behavior, use ``/bin/sh`` and ``-c`` as the first two
arguments.
.. admonition:: Example
``run "/bin/sh" "-c" "echo ${title} > /tmp/playing"``
This is not a particularly good example, because it doesn't handle
escaping, and a specially prepared file might allow an attacker to
execute arbitrary shell commands. It is recommended to write a small
shell script, and call that with ``run``.
``quit [<code>]``
Exit the player. If an argument is given, it's used as process exit code.
``quit_watch_later [<code>]``
Exit player, and store current playback position. Playing that file later
will seek to the previous position on start. The (optional) argument is
exactly as in the ``quit`` command.
``sub_add "<file>"``
Load the given subtitle file. It is not selected as current subtitle after
loading.
``sub_remove [<id>]``
Remove the given subtitle track. If the ``id`` argument is missing, remove
the current track. (Works on external subtitle files only.)
``sub_reload [<id>]``
Reload the given subtitle tracks. If the ``id`` argument is missing, remove
the current track. (Works on external subtitle files only.)
This works by unloading and re-adding the subtitle track.
``sub_step <skip>``
Change subtitle timing such, that the subtitle event after the next
``<skip>`` subtitle events is displayed. ``<skip>`` can be negative to step
backwards.
``sub_seek <skip>``
Seek to the next (skip set to 1) or the previous (skip set to -1) subtitle.
This is similar to ``sub_step``, except that it seeks video and audio
instead of adjusting the subtitle delay.
Like with ``sub_step``, this works with external text subtitles only. For
embedded text subtitles (like with Matroska), this works only with subtitle
events that have already been displayed.
``osd [<level>]``
Toggle OSD level. If ``<level>`` is specified, set the OSD mode
(see ``--osd-level`` for valid values).
``print_text "<string>"``
Print text to stdout. The string can contain properties (see
`Property Expansion`_).
``show_text "<string>" [<duration>|- [<level>]]``
Show text on the OSD. The string can contain properties, which are expanded
as described in `Property Expansion`_. This can be used to show playback
time, filename, and so on.
<duration>
The time in ms to show the message for. By default, it uses the same
value as ``--osd-duration``.
<level>
The minimum OSD level to show the text at (see ``--osd-level``).
``show_progress``
Show the progress bar, the elapsed time and the total duration of the file
on the OSD.
``discnav "<command>"``
Send a menu control command to the DVD/BD menu implementation. The following
commands are defined: ``up``, ``down``, ``left``, ``right``,
``menu`` (request to enter menu), ``prev`` (previous screen),
``select`` (activate current button), ``mouse`` (the mouse was clicked),
``mouse_move`` (the mouse cursor changed position).
``mouse_move`` will use the current mouse position.
Note that while the menu is active, the input section ``discnav-menu`` will
be enabled, so different key bindings can be mapped for menu mode.
``write_watch_later_config``
Write the resume config file that the ``quit_watch_later`` command writes,
but continue playback normally.
Input Commands that are Possibly Subject to Change
--------------------------------------------------
``af set|add|toggle|del|clr "filter1=params,filter2,..."``
Change audio filter chain. See ``vf`` command.
``vf set|add|toggle|del|clr "filter1=params,filter2,..."``
Change video filter chain.
The first argument decides what happens:
set
Overwrite the previous filter chain with the new one.
add
Append the new filter chain to the previous one.
toggle
Check if the given filter (with the exact parameters) is already
in the video chain. If yes, remove the filter. If no, add the filter.
(If several filters are passed to the command, this is done for
each filter.)
del
Remove the given filters from the video chain. Unlike in the other
cases, the second parameter is a comma separated list of filter names
or integer indexes. ``0`` would denote the first filter. Negative
indexes start from the last filter, and ``-1`` denotes the last
filter.
clr
Remove all filters. Note that like the other sub-commands, this does
not control automatically inserted filters.
You can assign labels to filter by prefixing them with ``@name:`` (where
``name`` is a user-chosen arbitrary identifier). Labels can be used to
refer to filters by name in all of the filter chain modification commands.
For ``add``, using an already used label will replace the existing filter.
The ``vf`` command shows the list of requested filters on the OSD after
changing the filter chain. This is roughly equivalent to
``show_text ${vf}``. Note that auto-inserted filters for format conversion
are not shown on the list, only what was requested by the user.
Normally, the commands will check whether the video chain is recreated
successfully, and will undo the operation on failure. If the command is run
before video is configured (can happen if the command is run immediately
after opening a file and before a video frame is decoded), this check can't
be run. Then it can happen that creating the video chain fails.
.. admonition:: Example for input.conf
- ``a vf set flip`` turn video upside-down on the ``a`` key
- ``b vf set ""`` remove all video filters on ``b``
- ``c vf toggle lavfi=gradfun`` toggle debanding on ``c``
``cycle_values ["!reverse"] <property> "<value1>" "<value2>" ...``
Cycle through a list of values. Each invocation of the command will set the
given property to the next value in the list. The command maintains an
internal counter which value to pick next, and which is initially 0. It is
reset to 0 once the last value is reached.
The internal counter is associated using the property name and the value
list. If multiple commands (bound to different keys) use the same name
and value list, they will share the internal counter.
The special argument ``!reverse`` can be used to cycle the value list in
reverse. Compared with a command that just lists the value in reverse, this
command will actually share the internal counter with the forward-cycling
key binding.
Note that there is a static limit of (as of this writing) 10 arguments
(this limit could be raised on demand).
``enable_section "<section>" [default|exclusive]``
Enable all key bindings in the named input section.
The enabled input sections form a stack. Bindings in sections on the top of
the stack are preferred to lower sections. This command puts the section
on top of the stack. If the section was already on the stack, it is
implicitly removed beforehand. (A section cannot be on the stack more than
once.)
If ``exclusive`` is specified as second argument, all sections below the
newly enabled section are disabled. They will be re-enabled as soon as
all exclusive sections above them are removed.
``disable_section "<section>"``
Disable the named input section. Undoes ``enable_section``.
``overlay_add <id> <x> <y> "<file>" <offset> "<fmt>" <w> <h> <stride>``
Add an OSD overlay sourced from raw data. This might be useful for scripts
and applications controlling mpv, and which want to display things on top
of the video window.
Overlays are usually displayed in screen resolution, but with some VOs,
the resolution is reduced to that of the video's. You can read the
``osd-width`` and ``osd-height`` properties. At least with ``--vo-xv`` and
anamorphic video (such as DVD), ``osd-par`` should be read as well, and the
overlay should be aspect-compensated. (Future directions: maybe mpv should
take care of some of these things automatically, but it's hard to tell
where to draw the line.)
``id`` is an integer between 0 and 63 identifying the overlay element. The
ID can be used to add multiple overlay parts, update a part by using this
command with an already existing ID, or to remove a part with
``overlay_remove``. Using a previously unused ID will add a new overlay,
while reusing an ID will update it. (Future directions: there should be
something to ensure different programs wanting to create overlays don't
conflict with each others, should that ever be needed.)
``x`` and ``y`` specify the position where the OSD should be displayed.
``file`` specifies the file the raw image data is read from. It can be
either a numeric UNIX file descriptor prefixed with ``@`` (e.g. ``@4``),
or a filename. The file will be mapped into memory with ``mmap()``. Some VOs
will pass the mapped pointer directly to display APIs (e.g. opengl or
vdpau), so no actual copying is involved. Truncating the source file while
the overlay is active will crash the player. You shouldn't change the data
while the overlay is active, because the data is essentially accessed at
random points. Instead, call ``overlay_add`` again (preferably with a
different memory region to prevent tearing).
``offset`` is the offset of the first pixel in the source file. It is
passed directly to ``mmap`` and is subject to certain restrictions
(see ``man mmap`` for details). In particular, this value has to be a
multiple of the system's page size.
``fmt`` is a string identifying the image format. Currently, only ``bgra``
is defined. This format has 4 bytes per pixels, with 8 bits per component.
The least significant 8 bits are blue, and the most significant 8 bits
are alpha (in little endian, the components are B-G-R-A, with B as first
byte). This uses premultiplied alpha: every color component is already
multiplied with the alpha component. This means the numeric value of each
component is equal to or smaller than the alpha component. (Violating this
rule will lead to different results with different VOs: numeric overflows
resulting from blending broken alpha values is considered something that
shouldn't happen, and consequently implementations don't ensure that you
get predictable behavior in this case.)
``w``, ``h``, and ``stride`` specify the size of the overlay. ``w`` is the
visible width of the overlay, while ``stride`` gives the width in bytes in
memory. In the simple case, and with the ``bgra`` format, ``stride==4*w``.
In general, the total amount of memory accessed is ``stride * h``.
(Technically, the minimum size would be ``stride * (h - 1) + w * 4``, but
for simplicity, the player will access all ``stride * h`` bytes.)
.. admonition:: Warning
When updating the overlay, you should prepare a second shared memory
region (e.g. make use of the offset parameter) and add this as overlay,
instead of reusing the same memory every time. Otherwise, you might
get the equivalent of tearing, when your application and mpv write/read
the buffer at the same time. Also, keep in mind that mpv might access
an overlay's memory at random times whenever it feels the need to do
so, for example when redrawing the screen.
``overlay_remove <id>``
Remove an overlay added with ``overlay_add`` and the same ID. Does nothing
if no overlay with this ID exists.
``script_message "<arg1>" "<arg2>" ...``
Send a message to all clients, and pass it the following list of arguments.
What this message means, how many arguments it takes, and what the arguments
mean is fully up to the receiver and the sender. Every client receives the
message, so be careful about name clashes (or use ``script_message_to``).
``script_message_to "<target>" "<arg1>" "<arg2>" ...``
Same as ``script_message``, but send it only to the client named
``<target>``. Each client (scripts etc.) has a unique name. For example,
Lua scripts can get their name via ``mp.get_script_name()``.
(Scripts use this internally to dispatch key bindings, and this can also
be used in input.conf to reassign such bindings.)
Undocumented commands: ``tv_last_channel`` (TV/DVB only), ``stop`` (questionable
use), ``get_property`` (?), ``vo_cmdline`` (experimental).
Input Command Prefixes
----------------------
These prefixes are placed between key name and the actual command. Multiple
prefixes can be specified. They are separated by whitespace.
``osd-auto`` (default)
Use the default behavior for this command.
``no-osd``
Do not use any OSD for this command.
``osd-bar``
If possible, show a bar with this command. Seek commands will show the
progress bar, property changing commands may show the newly set value.
``osd-msg``
If possible, show an OSD message with this command. Seek command show
the current playback time, property changing commands show the newly set
value as text.
``osd-msg-bar``
Combine osd-bar and osd-msg.
``raw``
Do not expand properties in string arguments. (Like ``"${property-name}"``.)
``expand-properties`` (default)
All string arguments are expanded as described in `Property Expansion`_.
All of the osd prefixes are still overridden by the global ``--osd-level``
settings.
Input Sections
--------------
Input sections group a set of bindings, and enable or disable them at once.
In ``input.conf``, each key binding is assigned to an input section, rather
than actually having explicit text sections.
Also see ``enable_section`` and ``disable_section`` commands.
Predefined bindings:
``default``
Bindings without input section are implicitly assigned to this section. It
is enabled by default during normal playback.
``encode``
Section which is active in encoding mode. It is enabled exclusively, so
that bindings in the ``default`` sections are ignored.
Properties
----------
Properties are used to set mpv options during runtime, or to query arbitrary
information. They can be manipulated with the ``set``/``add``/``cycle``
commands, and retrieved with ``show_text``, or anything else that uses property
expansion. (See `Property Expansion`_.)
The property name is annotated with RW to indicate whether the property is
generally writable.
If an option is referenced, the property will normally take/return exactly the
same values as the option. In these cases, properties are merely a way to change
an option at runtime.
Property list
-------------
``osd-level`` (RW)
See ``--osd-level``.
``osd-scale`` (RW)
OSD font size multiplicator, see ``--osd-scale``.
``loop`` (RW)
See ``--loop``.
``loop-file`` (RW)
See ``--loop-file`` (uses ``yes``/``no``).
``speed`` (RW)
See ``--speed``.
``filename``
Currently played file, with path stripped. If this is an URL, try to undo
percent encoding as well. (The result is not necessarily correct, but
looks better for display purposes. Use the ``path`` property to get an
unmodified filename.)
``file-size``
Length in bytes of the source file/stream. (This is the same as
``${stream-end}``. For ordered chapters and such, the
size of the currently played segment is returned.)
``path``
Full path of the currently played file.
``media-title``
If libquvi is used and libquvi returns a page title for the currently
played URL, return the page title.
Otherwise, if the currently played file has a ``title`` tag, use that.
Otherwise, if the media type is DVD, return the volume ID of DVD.
Otherwise, return the ``filename`` property.
``demuxer``
Name of the current demuxer. (This is useless.)
``stream-path``
Filename (full path) of the stream layer filename. (This is probably
useless. It looks like this can be different from ``path`` only when
using e.g. ordered chapters.)
``stream-pos`` (RW)
Raw byte position in source stream.
``stream-end``
Raw end position in bytes in source stream.
``stream-time-pos`` (RW)
Time position in source stream. This only works for DVD and Bluray. This
is probably never different from ``time-pos``, because ``time-pos`` is
forced to this value anyway.
``length``
Length of the current file in seconds. If the length is unknown, the
property is unavailable. Note that the file duration is not always exactly
known, so this is an estimate.
``avsync``
Last A/V synchronization difference. Unavailable if audio or video is
disabled.
``total-avsync-change``
Total A-V sync correction done. Unavailable if audio or video is
disabled.
``drop-frame-count``
Frames dropped because they arrived to late. Unavailable if video
is disabled
``percent-pos`` (RW)
Position in current file (0-100). The advantage over using this instead of
calculating it out of other properties is that it properly falls back to
estimating the playback position from the byte position, if the file
duration is not known.
``ratio-pos`` (RW)
Position in current file (0.0-1.0). higher precision that ``percent-pos``.
``time-pos`` (RW)
Position in current file in seconds.
``time-start``
Return the start time of the file. (Usually 0, but some kind of files,
especially transport streams, can have a different start time.)
``time-remaining``
Remaining length of the file in seconds. Note that the file duration is not
always exactly known, so this is an estimate.
``playtime-remaining``
``time-remaining`` scaled by the the current ``speed``.
``playback-time``
Return the playback time, which is the time difference between start PTS and current PTS.
``chapter`` (RW)
Current chapter number. The number of the first chapter is 0.
``edition`` (RW)
Current MKV edition number. Setting this property to a different value will
restart playback. The number of the first edition is 0.
``disc-titles``
Number of BD/DVD titles.
``disc-title`` (RW)
Current BD/DVD title number. Writing works only for ``dvdnav://`` and
``bd://`` (and aliases for these).
``disc-menu-active``
Return ``yes`` if the BD/DVD menu is active, or ``no`` on normal video
playback. The property is unavailable when playing something that is not
a BD or DVD. Use the ``discnav menu`` command to actually enter or leave
menu mode.
``chapters``
Number of chapters.
``editions``
Number of MKV editions.
``edition-list``
List of editions, current entry marked. Currently, the raw property value
is useless.
This has a number of sub-properties. Replace ``N`` with the 0-based edition
index.
``edition-list/count``
Number of editions. If there are no editions, this can be 0 or 1 (1
if there's a useless dummy edition).
``edition-list/N/id``
Edition ID as integer. Use this to set the ``edition`` property.
Currently, this is the same as the edition index.
``edition-list/N/default``
``yes`` if this is the default edition, ``no`` otherwise.
``edition-list/N/title``
Edition title as stored in the file. Not always available.
When querying the property with the client API using ``MPV_FORMAT_NODE``,
or with Lua ``mp.get_property_native``, this will return a mpv_node with
the following contents:
::
MPV_FORMAT_NODE_ARRAY
MPV_FORMAT_NODE_MAP (for each edition)
"id" MPV_FORMAT_INT64
"title" MPV_FORMAT_STRING
"default" MPV_FORMAT_FLAG
``angle`` (RW)
Current DVD angle.
``metadata``
Metadata key/value pairs.
If the property is accessed with Lua's ``mp.get_property_native``, this
returns a table with metadata keys mapping to metadata values. If it is
accessed with the client API, this returns a ``MPV_FORMAT_NODE_MAP``,
with tag keys mapping to tag values.
For OSD, it returns a formatted list. Trying to retrieve this property as
a raw string doesn't work.
This has a number of sub-properties:
``metadata/by-key/<key>``
Value of metadata entry ``<key>``.
``metadata/list/count``
Number of metadata entries.
``metadata/list/N/key``
Key name of the Nth metadata entry. (The first entry is ``0``).
``metadata/list/N/value``
Value of the Nth metadata entry.
``metadata/<key>``
Old version of ``metadata/by-key/<key>``. Use is discouraged, because
the metadata key string could conflict with other sub-properties.
The layout of this property might be subject to change. Suggestions are
welcome how exactly this property should work.
When querying the property with the client API using ``MPV_FORMAT_NODE``,
or with Lua ``mp.get_property_native``, this will return a mpv_node with
the following contents:
::
MPV_FORMAT_NODE_MAP
(key and string value for each metdata entry)
``chapter-metadata``
Metadata of current chapter. Works similar to ``metadata`` property. It
also allows the same access methods (using sub-properties).
Per-chapter metadata is very rare. Usually, only the chapter name
(``title``) is set.
For accessing other information, like chapter start, see the
``chapter-list`` property.
``vf-metadata/<filter-label>``
Metadata added by video filters. Accessed by the filter label,
which if not explicitly specified using the ``@filter-label:`` syntax,
will be ``<filter-name>NN``.
Works similar to ``metadata`` property. It allows the same access
methods (using sub-properties).
An example of these kind of metadata are the cropping parameters
added by ``--vf=lavfi=cropdetect``.
``pause`` (RW)
Pause status. This is usually ``yes`` or ``no``. See ``--pause``.
``core-idle``
Return ``yes`` if the playback core is paused, otherwise ``no``. This can
be different ``pause`` in special situations, such as when the player
pauses itself due to low network cache.
``cache``
Network cache fill state (0-100.0).
``cache-size`` (RW)
Total network cache size in KB. This is similar to ``--cache``. This allows
to set the cache size at runtime. Currently, it's not possible to enable
or disable the cache at runtime using this property, just to resize an
existing cache.
Note that this tries to keep the cache contents as far as possible. To make
this easier, the cache resizing code will allocate the new cache while the
old cache is still allocated.
Don't use this when playing DVD or Bluray.
``cache-free`` (R)
Total free cache size in KB.
``cache-used`` (R)
Total used cache size in KB.
``paused-for-cache``
Returns ``yes`` when playback is paused because of waiting for the cache.
``eof-reached``
Returns ``yes`` if end of playback was reached, ``no`` otherwise. Note
that this is usually interesting only if ``--keep-open`` is enabled,
since otherwise the player will immediately play the next file (or exit
or enter idle mode), and in these cases the ``eof-reached`` property will
logically be cleared immediately after it's set.
``pts-association-mode`` (RW)
See ``--pts-association-mode``.
``hr-seek`` (RW)
See ``--hr-seek``.
``volume`` (RW)
Current volume (0-100).
``mute`` (RW)
Current mute status (``yes``/``no``).
``audio-delay`` (RW)
See ``--audio-delay``.
``audio-format``
Audio format as string.
``audio-codec``
Audio codec selected for decoding.
``audio-bitrate``
Audio bitrate. This is probably a very bad guess in most cases.
``audio-samplerate``
Audio samplerate.
``audio-channels``
Number of audio channels. The OSD value of this property is actually the
channel layout, while the raw value returns the number of channels only.
``aid`` (RW)
Current audio track (similar to ``--aid``).
``audio`` (RW)
Alias for ``aid``.
``balance`` (RW)
Audio channel balance. (The implementation of this feature is rather odd.
It doesn't change the volumes of each channel, but instead sets up a pan
matrix to mix the the left and right channels.)
``fullscreen`` (RW)
See ``--fullscreen``.
``deinterlace`` (RW)
See ``--deinterlace``.
``colormatrix`` (RW)
See ``--colormatrix``.
``colormatrix-input-range`` (RW)
See ``--colormatrix-input-range``.
``colormatrix-output-range`` (RW)
See ``--colormatrix-output-range``.
``colormatrix-primaries`` (RW)
See ``--colormatrix-primaries``.
``ontop`` (RW)
See ``--ontop``.
``border`` (RW)
See ``--border``.
``framedrop`` (RW)
See ``--framedrop``.
``gamma`` (RW)
See ``--gamma``.
``brightness`` (RW)
See ``--brightness``.
``contrast`` (RW)
See ``--contrast``.
``saturation`` (RW)
See ``--saturation``.
``hue`` (RW)
See ``--hue``.
``hwdec`` (RW)
Return the current hardware decoder that is used. This uses the same values
as the ``--hwdec`` option. If software decoding is active, this returns
``no``. You can write this property. Then the ``--hwdec`` option is set to
the new value, and video decoding will be reinitialized (internally, the
player will perform a seek to refresh the video properly).
Note that you don't know the success of the operation immediately after
writing this property. It happens with a delay as video is reinitialized.
``panscan`` (RW)
See ``--panscan``.
``video-format``
Video format as string.
``video-codec``
Video codec selected for decoding.
``video-bitrate``
Video bitrate (a bad guess).
``width``, ``height``
Video size. This uses the size of the video as decoded, or if no video
frame has been decoded yet, the (possibly incorrect) container indicated
size.
``video-params``
Video parameters, as output by the decoder (with overrides like aspect
etc. applied). This has a number of sub-properties:
``video-params/pixelformat``
The pixel format as string. This uses the same names as used in other
places of mpv.
``video-params/w``, ``video-params/h``
Video size as integers, with no aspect correction applied.
``video-params/dw``, ``video-params/dh``
Video size as integers, scaled for correct aspect ratio.
``video-params/aspect``
Display aspect ratio as float.
``video-params/par``
Pixel aspect ratio.
``video-params/colormatrix``
The colormatrix in use as string. (Exact values subject to change.)
``video-params/colorlevels``
The colorlevels as string. (Exact values subject to change.)
``video-params/primaries``
The primaries in use as string. (Exact values subject to change.)
``video-params/chroma-location``
Chroma location as string. (Exact values subject to change.)
``video-params/rotate``
Intended display rotation in degrees (clockwise).
When querying the property with the client API using ``MPV_FORMAT_NODE``,
or with Lua ``mp.get_property_native``, this will return a mpv_node with
the following contents:
::
MPV_FORMAT_NODE_ARRAY
MPV_FORMAT_NODE_MAP (for each track)
"pixelformat" MPV_FORMAT_STRING
"w" MPV_FORMAT_INT64
"h" MPV_FORMAT_INT64
"dw" MPV_FORMAT_INT64
"dh" MPV_FORMAT_INT64
"aspect" MPV_FORMAT_DOUBLE
"par" MPV_FORMAT_DOUBLE
"colormatrix" MPV_FORMAT_STRING
"colorlevels" MPV_FORMAT_STRING
"primaries" MPV_FORMAT_STRING
"chroma-location" MPV_FORMAT_STRING
"rotate" MPV_FORMAT_INT64
``dwidth``, ``dheight``
Video display size. This is the video size after filters and aspect scaling
have been applied. The actual video window size can still be different
from this.
``video-out-params``
Same as ``video-params``, but after video filters have been applied. If
there are no video filters in use, this will contain the same values as
``video-params``. Note that this is still not necessarily what the video
window uses, since all real VOs do their own scaling.
Has the same sub-properties as ``video-params``.
``fps``
Container FPS. This can easily contain bogus values. For videos that use
modern container formats or video codecs, this will often be incorrect.
``estimated-vf-fps``
Estimated/measured FPS of the video filter chain output. (If no filters
are used, this corresponds to decoder output.) This uses the average of
the 10 past frame durations to calculate the FPS. It will be inaccurate
if framedropping is involved (such as when framedrop is explicitly
enabled, or after precise seeking). Files with imprecise timestamps (such
as Matroska) might lead to unstable results.
``window-scale`` (RW)
Window size multiplier. Setting this will resize the video window to the
values contained in ``dwidth`` and ``dheight`` multiplied with the value
set with this property. Setting ``1`` will resize to original video size
(or to be exactly, the size the video filters output). ``2`` will set the
double size, ``0.5`` halves the size.
``video-aspect`` (RW)
Video aspect, see ``--video-aspect``.
``osd-width``, ``osd-height``
Last known OSD width (can be 0). This is needed if you want to use the
``overlay_add`` command. It gives you the actual OSD size, which can be
different from the window size in some cases.
``osd-par``
Last known OSD display pixel aspect (can be 0).
``vid`` (RW)
Current video track (similar to ``--vid``).
``video`` (RW)
Alias for ``vid``.
``video-align-x``, ``video-align-y`` (RW)
See ``--video-align-x`` and ``--video-align-y``.
``video-pan-x``, ``video-pan-y`` (RW)
See ``--video-pan-x`` and ``--video-pan-y``.
``video-zoom`` (RW)
See ``--video-zoom``.
``video-unscaled`` (W)
See ``--video-unscaled``.
``program`` (W)
Switch TS program (write-only).
``sid`` (RW)
Current subtitle track (similar to ``--sid``).
``secondary-sid`` (RW)
Secondary subtitle track (see ``--secondary-sid``).
``sub`` (RW)
Alias for ``sid``.
``sub-delay`` (RW)
See ``--sub-delay``.
``sub-pos`` (RW)
See ``--sub-pos``.
``sub-visibility`` (RW)
See ``--sub-visibility``.
``sub-forced-only`` (RW)
See ``--sub-forced-only``.
``sub-scale`` (RW)
Subtitle font size multiplicator.
``ass-use-margins`` (RW)
See ``--ass-use-margins``.
``ass-vsfilter-aspect-compat`` (RW)
See ``--ass-vsfilter-aspect-compat``.
``ass-style-override`` (RW)
See ``--ass-style-override``.
``stream-capture`` (RW)
A filename, see ``--capture``. Setting this will start capture using the
given filename. Setting it to an empty string will stop it.
``tv-brightness``, ``tv-contrast``, ``tv-saturation``, ``tv-hue`` (RW)
TV stuff.
``playlist-pos`` (RW)
Current position on playlist. The first entry is on position 0. Writing
to the property will restart playback at the written entry.
``playlist-count``
Number of total playlist entries.
``playlist``
Playlist, current entry marked. Currently, the raw property value is
useless.
This has a number of sub-properties. Replace ``N`` with the 0-based playlist
entry index.
``playlist/count``
Number of playlist entries (same as ``playlist-count``).
``playlist/N/filename``
Filename of the Nth entry.
When querying the property with the client API using ``MPV_FORMAT_NODE``,
or with Lua ``mp.get_property_native``, this will return a mpv_node with
the following contents:
::
MPV_FORMAT_NODE_ARRAY
MPV_FORMAT_NODE_MAP (for each playlist entry)
"filename" MPV_FORMAT_STRING
``track-list``
List of audio/video/sub tracks, current entry marked. Currently, the raw
property value is useless.
This has a number of sub-properties. Replace ``N`` with the 0-based track
index.
``track-list/count``
Total number of tracks.
``track-list/N/id``
The ID as it's used for ``-sid``/``--aid``/``--vid``. This is unique
within tracks of the same type (sub/audio/video), but otherwise not.
``track-list/N/type``
String describing the media type. One of ``audio``, ``video``, ``sub``.
``track-list/N/src-id``
Track ID as used in the source file. Not always available.
``track-list/N/title``
Track title as it is stored in the file. Not always available.
``track-list/N/lang``
Track language as identified by the file. Not always available.
``track-list/N/albumart``
``yes`` if this is a video track that consists of a single picture,
``no`` or unavailable otherwise. This is used for video tracks that are
really attached pictures in audio files.
``track-list/N/default``
``yes`` if the track has the default flag set in the file, ``no``
otherwise.
``track-list/N/codec``
The codec name used by this track, for example ``h264``. Unavailable
in some rare cases.
``track-list/N/external``
``yes`` if the track is an external file, ``no`` otherwise. This is
set for separate subtitle files.
``track-list/N/external-filename``
The filename if the track is from an external file, unavailable
otherwise.
``track-list/N/selected``
``yes`` if the track is currently decoded, ``no`` otherwise.
When querying the property with the client API using ``MPV_FORMAT_NODE``,
or with Lua ``mp.get_property_native``, this will return a mpv_node with
the following contents:
::
MPV_FORMAT_NODE_ARRAY
MPV_FORMAT_NODE_MAP (for each track)
"id" MPV_FORMAT_INT64
"type" MPV_FORMAT_STRING
"src-id" MPV_FORMAT_INT64
"title" MPV_FORMAT_STRING
"lang" MPV_FORMAT_STRING
"albumart" MPV_FORMAT_FLAG
"default" MPV_FORMAT_FLAG
"external" MPV_FORMAT_FLAG
"external-filename" MPV_FORMAT_STRING
"codec" MPV_FORMAT_STRING
``chapter-list``
List of chapters, current entry marked. Currently, the raw property value
is useless.
This has a number of sub-properties. Replace ``N`` with the 0-based chapter
index.
``chapter-list/count``
Number of chapters.
``chapter-list/N/title``
Chapter title as stored in the file. Not always available.
``chapter-list/N/time``
Chapter start time in seconds as float.
When querying the property with the client API using ``MPV_FORMAT_NODE``,
or with Lua ``mp.get_property_native``, this will return a mpv_node with
the following contents:
::
MPV_FORMAT_NODE_ARRAY
MPV_FORMAT_NODE_MAP (for each chapter)
"title" MPV_FORMAT_STRING
"time" MPV_FORMAT_DOUBLE
``quvi-format`` (RW)
See ``--quvi-format``. Cycling this property (``cycle``) will attempt to
cycle through known format, although currently this feature doesn't work
well at all.
``af`` (RW)
See ``--af`` and the ``af`` command.
``vf`` (RW)
See ``--vf`` and the ``vf`` command.
When querying the property with the client API using ``MPV_FORMAT_NODE``,
or with Lua ``mp.get_property_native``, this will return a mpv_node with
the following contents:
::
MPV_FORMAT_NODE_ARRAY
MPV_FORMAT_NODE_MAP (for each filter entry)
"name" MPV_FORMAT_STRING
"label" MPV_FORMAT_STRING [optional]
"params" MPV_FORMAT_NODE_MAP [optional]
"key" MPV_FORMAT_STRING
"value" MPV_FORMAT_STRING
It's also possible to write the property using this format.
``seekable``
Return whether it's generally possible to seek in the current file.
``options/<name>`` (RW)
Read-only access to value of option ``--<name>``. Most options can be
changed at runtime by writing to this property. Note that many options
require reloading the file for changes to take effect. If there is an
equivalent property, prefer setting the property instead.
``write_watch_later_config``
Saves current playback position.
Property Expansion
------------------
All string arguments to input commands as well as certain options (like
``--term-playing-msg``) are subject to property expansion.
.. admonition:: Example for input.conf
``i show_text "Filename: ${filename}"``
shows the filename of the current file when pressing the ``i`` key
Within ``input.conf``, property expansion can be inhibited by putting the
``raw`` prefix in front of commands.
The following expansions are supported:
``${NAME}``
Expands to the value of the property ``NAME``. If retrieving the property
fails, expand to an error string. (Use ``${NAME:}`` with a trailing
``:`` to expand to an empty string instead.)
If ``NAME`` is prefixed with ``=``, expand to the raw value of the property
(see section below).
``${NAME:STR}``
Expands to the value of the property ``NAME``, or ``STR`` if the
property cannot be retrieved. ``STR`` is expanded recursively.
``${?NAME:STR}``
Expands to ``STR`` (recursively) if the property ``NAME`` is available.
``${!NAME:STR}``
Expands to ``STR`` (recursively) if the property ``NAME`` cannot be
retrieved.
``${?NAME==VALUE:STR}``
Expands to ``STR`` (recursively) if the property ``NAME`` expands to a
string equal to ``VALUE``. You can prefix ``NAME`` with ``=`` in order to
compare the raw value of a property (see section below). If the property
is unavailable, or other errors happen when retrieving it, the value is
never considered equal.
Note that ``VALUE`` can't contain any of the characters ``:`` or ``}``.
Also, it is possible that escaping with ``"`` or ``%`` might be added in
the future, should the need arise.
``${!NAME==VALUE:STR}``
Same as with the ``?`` variant, but ``STR`` is expanded if the value is
not equal. (Using the same semantics as with ``?``.)
``$$``
Expands to ``$``.
``$}``
Expands to ``}``. (To produce this character inside recursive
expansion.)
``$>``
Disable property expansion and special handling of ``$`` for the rest
of the string.
In places where property expansion is allowed, C-style escapes are often
accepted as well. Example:
- ``\n`` becomes a newline character
- ``\\`` expands to ``\``
Raw and Formatted Properties
----------------------------
Normally, properties are formatted as human-readable text, meant to be
displayed on OSD or on the terminal. It is possible to retrieve an unformatted
(raw) value from a property by prefixing its name with ``=``. These raw values
can be parsed by other programs and follow the same conventions as the options
associated with the properties.
.. admonition:: Examples
- ``${time-pos}`` expands to ``00:14:23`` (if playback position is at 14
minutes 23 seconds)
- ``${=time-pos}`` expands to ``863.4`` (same time, plus 400 milliseconds -
milliseconds are normally not shown in the formatted case)
Sometimes, the difference in amount of information carried by raw and formatted
property values can be rather big. In some cases, raw values have more
information, like higher precision than seconds with ``time-pos``. Sometimes
it is the other way around, e.g. ``aid`` shows track title and language in the
formatted case, but only the track number if it is raw.
Reference in New Issue View Git Blame Copy Permalink