mpv/DOCS/MPlayer-FAQ

243 lines
10 KiB
Plaintext

Yes, this is the MPlayer FAQ.
=============================
About:
~~~~~~
Many people asked same questions so I decided to write this stuff.
I know that people will never read this but at least i try to
pull down number of these mails.
And from now i can say that "read the fuckin' FAQ!" :-)
Let's ask!
~~~~~~~~~~
Q: What about DVD playback?
A: Read files 'DVD' and 'DVD-FAQ'.
Q: SDL output doesn't work or compile. Problem is ....
A: It is tested with newest SDL (probably runs on 1.1.7+).
It does NOT work with 1.1.6, 1.1.5 1.1.4 1.1.3 1.0.4 etc, don't ask.
Q: I am still having trouble compiling with SDL support. gcc says something
about "undefined reference to `SDL_EnableKeyRepeat'" What's now?
A: Where did you install the SDL library? If you installed in /usr/local
(the default) then edit the top level config.mak and add
"-L/usr/local/lib " after "X_LIBS=" Now type make. You're done!
Q: It doesn't compile, and it misses uint64_t inttypes.h and similar things...
A: copy DOCS/inttypes.h to MPlayer directory (cp DOCS/inttypes.h .)
try again... if fail, contact me
Q: I have Pentium III but ./configure doesn't detect SSE
A: Only kernel versions 2.4.x supports SSE (or try latest 2.2.19 or newer, but
be prepared for problems)
Q: -xy option doesn't work with x11 driver (-vo x11)
A: x11 driver doesn't support scaling, but XF86VidMode support is now
used: you must specify the -vm and the -fs switch, and you're done.
Make sure you have the right Modelines in your XF86Config file, and
try if the DGA driver (and SDL's DGA driver, see VIDEOCARDS) works for you.
It's much faster. If SDL's DGA works too, use that, it'll be EVEN
faster!
Q: audio goes out of sync playing .avi file
A: try with -bps or -nobps option
if still bad, send me (upload to ftp) that file, I'll check.
Q: what is the meaning of numbers in the status line?
A: see:
A: 2.1 V: 2.2 A-V: -0.167 ct: 0.042 57 41% 0% 2.6% 0
- A: audio position in seconds
- V: video position in seconds
- A-V: audio-video difference in seconds (delay)
- ct: total A-V sync correction done
- frames played (counting from last seek)
- video codec cpu usage in percent (for mpeg it includes video_out too!)
- video_out cpu usage for avi, 0 for mpg (see above)
- audio codec cpu usage in percent
- frames needed to drop to maintain A-V sync
Most of them are for debug purposes, and will be removed soon.
Q: Why is video_out cpu usage zero (0%) for mpeg files?
A: It's not zero, but it's built in into codec, so can't be measured separated.
You should try to play the file using -vo null and then -vo ... and check
the difference to see video_out speed...
Q: OpenGL (-vo gl) output doesn't work (hangup/black window/X11 errors/...)
A: your opengl driver doesn't support dynamic texture changes (glTexSubImage)
it's known not to work with nVidia's binary shit.
it's known to work with Utah-GLX/DRI and Matrox G400 card. Also with
DRI and Radeon card. It won't work with DRI others than these.
it will not work with 3DFX cards because the 256x256 texture size limit.
Q: I have G200/G400, how to compile/use mga_vid driver?
A: read VIDEOCARDS, INSTALL, README
Q: What's XMMP? (it's XMMS or XMPS but mispelled?)
A: It's a new project, see http://frozenproductions.com for details
Q: There are error messages about file not found /usr/lib/win32/....
A: Download & install w32codec.zip from *our* FTP
(avifile's codec package has different DLL set)
Q: ...... works with avifile/aviplay while doesn't with MPlayer
A: MPlayer != avifile
The only common thing between these players is the Win32 DLL loader.
The codecs (dll) sets, syncronization, demultiplexing etc is totaly
different and shouldn't be compared.
If something works with aviplay it doesn't mean that MPlayer should do
it and vice versa.
Q: Indeo 3.x/4.x movies are viewed upside-down!!!?
A: It's a known bug (really it's a bug/limitation of the DLL codec)
Try if your vo driver supports the -flip switch.
Q: Indeo 3.x,4.x video doesn't work at 32bpp resolutions (16,24 bpp are ok)
A: It's a known bug (really it's a bug/limitation of the DLL codec)
Q: I've got 'MPlayer interrupted by signal 11' in module audio_setup or
decode_audio.
A: This is highly unlikely, since the mp3lib rewrite. Contact us, it may be
a bug. Possibly it's a damaged file, try with -afm 4 .
Q: Are there rpm/deb/... packages of MPlayer?
A: You can make a .deb package for yourself, check DOCS/DEBIAN .
It's _STRONGLY_ discouraged to use precompiled packages
of MPlayer, since it (currently) _highly_ depends on compile-time
options and optimizations!
Precompiled packages are COMPLETELY unsupported by the MPlayer team!
Q: Are there any mailing lists on MPlayer?
A: Yes! See README on how to subscribe them!
Q: I've found a nasty bug when I tried to play my favourite video!!
Who should I inform?
A: See DOCS/BUGREPORTS
Q: During 'make', MPlayer complains about X11 libraries. I don't understand,
I DO have X installed!?
A: ...but you don't have the X development package installed. Or not
correctly. It's called XFree86-devel* under RedHat, and xlib6g-dev* under
Debian. Also check if the /usr/X11 symlink exists (this can be a problem on
Mandrake systems). It can be created with the
$ ln -sf /usr/X11R6 /usr/X11
command. Also check the /usr/include/X11 link :
$ ln -sf /usr/X11R6/include/X11 /usr/include/X11
Your distribution may differ from the Linux Filesystem Standard.
Q: I have problems playing files with ... codec. Can I use'em?
A: Check http://mplayer.sourceforge.net/DOCS/codecs.html,
if it doesn't contain your codec, read
http://mplayer.sourceforge.net/DOCS/CODECS, and contact us.
Q: What about DGA driver? I can't find it!!!
A: ./configure autodetects your DGA driver. If -vo help doesn't show
DGA, then there's a problem with your X installation.
Try ./configure --enable-dga (and read VIDEOCARDS)
Alternatively, try SDL's DGA driver with '-vo sdl -sdl dga' options.
Q: Ok, -vo help shows DGA driver, but it is babbling about permissions!
Help me!
A: It works only if running as root! It's a DGA limitation.
You should become to root (su -), and try again.
Another solution is making mplayer SUID root, but its NOT RECOMMENDED!
'chown root /usr/local/bin/mplayer'
'chmod 750 /usr/local/bin/mplayer'
'chmod +s /usr/local/bin/mplayer'
!!!! BUT STAY TUNED !!!!
This is a *BIG* security risk! *NEVER* do this on a server or on a computer
can be accessed by more people than only you because they can gain root
privilegies through suid root mplayer!!!
!!!! SO YOU HAVE BEEN WARNED ... !!!!
Q: The fsdga driver doesn't work with my xyz.avi file. Why is that?
A: Because it only works with MPEG. (yet)
Q: When using Xvideo, my Voodoo 3/Banshee says:
X Error of failed request: BadAccess (attempt to access private resource
denied)
Major opcode of failed request: 147 (MIT-SHM)
Minor opcode of failed request: 1 (X_ShmAttach)
Serial number of failed request: 26
Current serial number in output stream:27
A: Your driver is old, update it. Either download (at least) DRI version 0.6
from http://dri.sourceforge.net , or use the DRI cvs.
Q: When using Xvideo, I can't play DivX avis with my Voodoo 3/Banshee !
It says:
...
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x30323449 (I420) planar
...
A: See the previous answer.
Q: I've downloaded an ASF with asfrecorder, but MPlayer can't play it !
A: asfrecorder, and the ASF format itself is a big crap.
Do not contact us, go to hell.
Q: Umm, what is "IdegCounter" ?
A: A mixture of a hungarian and an english word. In english, "Ideg" means
"nerve", and is pronounced as something like "ydaegh" . It was first used
to measure the nervousness of A'rpi, after some (umm) "mystic" disappearance
of CVS code ;)
Q: I can't compile SVGAlib.. I'm using 2.3/2.4 kernel.
A: You have to edit SVGAlib's Makefile.cfg and comment "BACKGROUND = y" out.
Q: LIRC doesn't work, because ...
A: Are you sure you use "mplayer_lirc" instead of "mplayer" ?
Q: MPlayer exits with something error when using l3codeca.acm
A: Check 'ldd /usr/local/bin/mplayer' output. If it contains
libc.so.6 => /lib/libc.so.6 (0x4???????)
where "?" is any number then it's ok, the error is not here. If it is:
libc.so.6 => /lib/libc.so.6 (0x00??????)
then there is problem with your kernel/libc. Maybe you are using some
security patches (for example Solar Designer's OpenWall patch) which
forces loading libraries to very low addresses.
Because l3codeca.acm is a non-relocatable DLL, it must be loaded to
0x00400000, we can't change this. You should use non-patched kernel,
or use MPlayer's -afm 1 option to disable using l3codeca.acm.
Q: My computer plays M$ DivX AVIs with resolutions ~ 640x300 and stereo mp3
sound too slow. When I use -nosound switch, everything is ok (but quiet).
A: Those files probably have 48Khz audio, and your soundcard/driver can't play
it correctly. Audio downsampling isn't implemented in MPlayer (yet).
Q: I'd like to use/port MPlayer on/to my <insert your favourite architecture
here> on <insert your favourite OS here> . Is it possible?
A: No.
Q: But...!
A: No.
Q: And if MPEG is sufficient?
A: Maybe. But you better look for already existant MPEG players on that
platform.
Q: MPlayer dies with "MPlayer interrupted by signal 4 in module: decode_video".
A: Try running MPlayer on the machine you compiled on. Or recompile. Don't
use MPlayer on different CPU than it was compiled on.
Q: I have problems with icewm and fullscreen xv mode..
A: Known problem, icewm sucks.
Q: I got this playing mpeg files: Can't find codec for video format 0x10000001 !
A: You have old version of codecs.conf at ~/.mplayer/. Upgrade it from DOCS/
Q: After starting mplayer under KDE(1/2) I just get a black screen and nothing
happens, after about one minute the video starts playing.
A: The KDE arts sound daemon is blocking the sound device, either wait the time
until video starts or you disable the arts-daemon in kontrollcenter.
Q: But it works with avifile !
A: So what?
Q: Then avifile is better !
A: Then use avifile, it has nice GUI and nice C++ code :)
Q: Subtitles are very nice, the most beautiful I've ever seen, but they slow
down the playing! I know it's unlikely...
A: After running ./configure , edit config.h and replace #undef FAST_OSD with
#define FAST_OSD . Then recompile.