mpv/DOCS/man/vo.rst

VIDEO OUTPUT DRIVERS
====================

Video output drivers are interfaces to different video output facilities. The
syntax is:

``--vo=<driver1[:suboption1[=value]:...],driver2,...[,]>``
    Specify a priority list of video output drivers to be used.

If the list has a trailing ',', mpv will fall back on drivers not contained
in the list. Suboptions are optional and can mostly be omitted.

You can also set defaults for each driver. The defaults are applied before the
normal driver parameters.

``--vo-defaults=<driver1[:parameter1:parameter2:...],driver2,...>``
    Set defaults for each driver.

.. note::

    See ``--vo=help`` for a list of compiled-in video output drivers.

    The recommended output driver is ``--vo=opengl-hq``. All other drivers are
    for compatibility or special purposes. By default, ``--vo=opengl`` is used,
    but if that appears not to work, it fallback to other drivers (in the same
    order as listed by ``--vo=help``).

Available video output drivers are:

``xv`` (X11 only)
    Uses the XVideo extension to enable hardware-accelerated display. This is
    the most compatible VO on X, but may be low-quality, and has issues with
    OSD and subtitle display.

    .. note:: This driver is for compatibility with old systems.

    ``adaptor=<number>``
        Select a specific XVideo adapter (check xvinfo results).
    ``port=<number>``
        Select a specific XVideo port.
    ``ck=<cur|use|set>``
        Select the source from which the color key is taken (default: cur).

        cur
          The default takes the color key currently set in Xv.
        use
          Use but do not set the color key from mpv (use the ``--colorkey``
          option to change it).
        set
          Same as use but also sets the supplied color key.

    ``ck-method=<man|bg|auto>``
        Sets the color key drawing method (default: man).

        man
          Draw the color key manually (reduces flicker in some cases).
        bg
          Set the color key as window background.
        auto
          Let Xv draw the color key.

    ``colorkey=<number>``
        Changes the color key to an RGB value of your choice. ``0x000000`` is
        black and ``0xffffff`` is white.

    ``no-colorkey``
        Disables color-keying.

    ``buffers=<number>``
        Number of image buffers to use for the internal ringbuffer (default: 2).
        Increasing this will use more memory, but might help with the X server
        not responding quickly enough if video FPS is close to or higher than
        the display refresh rate.

``x11`` (X11 only)
    Shared memory video output driver without hardware acceleration that works
    whenever X11 is present.

    .. note:: This is a fallback only, and should not be normally used.

``vdpau`` (X11 only)
    Uses the VDPAU interface to display and optionally also decode video.
    Hardware decoding is used with ``--hwdec=vdpau``.

    .. note::

        Earlier versions of mpv (and MPlayer, mplayer2) provided sub-options
        to tune vdpau post-processing, like ``deint``, ``sharpen``, ``denoise``,
        ``chroma-deint``, ``pullup``, ``hqscaling``. These sub-options are
        deprecated, and you should use the ``vdpaupp`` video filter instead.

    ``sharpen=<-1-1>``
        (Deprecated. See note about ``vdpaupp``.)

        For positive values, apply a sharpening algorithm to the video, for
        negative values a blurring algorithm (default: 0).
    ``denoise=<0-1>``
        (Deprecated. See note about ``vdpaupp``.)

        Apply a noise reduction algorithm to the video (default: 0; no noise
        reduction).
    ``deint=<-4-4>``
        (Deprecated. See note about ``vdpaupp``.)

        Select deinterlacing mode (default: 0). In older versions (as well as
        MPlayer/mplayer2) you could use this option to enable deinterlacing.
        This doesn't work anymore, and deinterlacing is enabled with either
        the ``d`` key (by default mapped to the command ``cycle deinterlace``),
        or the ``--deinterlace`` option. Also, to select the default deint mode,
        you should use something like ``--vf-defaults=vdpaupp:deint-mode=temporal``
        instead of this sub-option.

        0
            Pick the ``vdpaupp`` video filter default, which corresponds to 3.
        1
            Show only first field.
        2
            Bob deinterlacing.
        3
            Motion-adaptive temporal deinterlacing. May lead to A/V desync
            with slow video hardware and/or high resolution.
        4
            Motion-adaptive temporal deinterlacing with edge-guided spatial
            interpolation. Needs fast video hardware.
    ``chroma-deint``
        (Deprecated. See note about ``vdpaupp``.)

        Makes temporal deinterlacers operate both on luma and chroma (default).
        Use no-chroma-deint to solely use luma and speed up advanced
        deinterlacing. Useful with slow video memory.
    ``pullup``
        (Deprecated. See note about ``vdpaupp``.)

        Try to apply inverse telecine, needs motion adaptive temporal
        deinterlacing.
    ``hqscaling=<0-9>``
        (Deprecated. See note about ``vdpaupp``.)

        0
            Use default VDPAU scaling (default).
        1-9
            Apply high quality VDPAU scaling (needs capable hardware).
    ``fps=<number>``
        Override autodetected display refresh rate value (the value is needed
        for framedrop to allow video playback rates higher than display
        refresh rate, and for vsync-aware frame timing adjustments). Default 0
        means use autodetected value. A positive value is interpreted as a
        refresh rate in Hz and overrides the autodetected value. A negative
        value disables all timing adjustment and framedrop logic.
    ``composite-detect``
        NVIDIA's current VDPAU implementation behaves somewhat differently
        under a compositing window manager and does not give accurate frame
        timing information. With this option enabled, the player tries to
        detect whether a compositing window manager is active. If one is
        detected, the player disables timing adjustments as if the user had
        specified ``fps=-1`` (as they would be based on incorrect input). This
        means timing is somewhat less accurate than without compositing, but
        with the composited mode behavior of the NVIDIA driver, there is no
        hard playback speed limit even without the disabled logic. Enabled by
        default, use ``no-composite-detect`` to disable.
    ``queuetime_windowed=<number>`` and ``queuetime_fs=<number>``
        Use VDPAU's presentation queue functionality to queue future video
        frame changes at most this many milliseconds in advance (default: 50).
        See below for additional information.
    ``output_surfaces=<2-15>``
        Allocate this many output surfaces to display video frames (default:
        3). See below for additional information.
    ``colorkey=<#RRGGBB|#AARRGGBB>``
        Set the VDPAU presentation queue background color, which in practice
        is the colorkey used if VDPAU operates in overlay mode (default:
        ``#020507``, some shade of black). If the alpha component of this value
        is 0, the default VDPAU colorkey will be used instead (which is usually
        green).
    ``force-yuv``
        Never accept RGBA input. This means mpv will insert a filter to convert
        to a YUV format before the VO. Sometimes useful to force availability
        of certain YUV-only features, like video equalizer or deinterlacing.

    Using the VDPAU frame queuing functionality controlled by the queuetime
    options makes mpv's frame flip timing less sensitive to system CPU load and
    allows mpv to start decoding the next frame(s) slightly earlier, which can
    reduce jitter caused by individual slow-to-decode frames. However, the
    NVIDIA graphics drivers can make other window behavior such as window moves
    choppy if VDPAU is using the blit queue (mainly happens if you have the
    composite extension enabled) and this feature is active. If this happens on
    your system and it bothers you then you can set the queuetime value to 0 to
    disable this feature. The settings to use in windowed and fullscreen mode
    are separate because there should be no reason to disable this for
    fullscreen mode (as the driver issue should not affect the video itself).

    You can queue more frames ahead by increasing the queuetime values and the
    ``output_surfaces`` count (to ensure enough surfaces to buffer video for a
    certain time ahead you need at least as many surfaces as the video has
    frames during that time, plus two). This could help make video smoother in
    some cases. The main downsides are increased video RAM requirements for
    the surfaces and laggier display response to user commands (display
    changes only become visible some time after they're queued). The graphics
    driver implementation may also have limits on the length of maximum
    queuing time or number of queued surfaces that work well or at all.

``direct3d_shaders`` (Windows only)
    Video output driver that uses the Direct3D interface.

    .. note:: This driver is for compatibility with systems that don't provide
              proper OpenGL drivers.

    ``prefer-stretchrect``
        Use ``IDirect3DDevice9::StretchRect`` over other methods if possible.

    ``disable-stretchrect``
        Never render the video using ``IDirect3DDevice9::StretchRect``.

    ``disable-textures``
        Never render the video using D3D texture rendering. Rendering with
        textures + shader will still be allowed. Add ``disable-shaders`` to
        completely disable video rendering with textures.

    ``disable-shaders``
        Never use shaders when rendering video.

    ``only-8bit``
        Never render YUV video with more than 8 bits per component.
        Using this flag will force software conversion to 8-bit.

    ``disable-texture-align``
        Normally texture sizes are always aligned to 16. With this option
        enabled, the video texture will always have exactly the same size as
        the video itself.


    Debug options. These might be incorrect, might be removed in the future,
    might crash, might cause slow downs, etc. Contact the developers if you
    actually need any of these for performance or proper operation.

    ``force-power-of-2``
        Always force textures to power of 2, even if the device reports
        non-power-of-2 texture sizes as supported.

    ``texture-memory=<mode>``
        Only affects operation with shaders/texturing enabled, and (E)OSD.
        Possible values:

        ``default`` (default)
            Use ``D3DPOOL_DEFAULT``, with a ``D3DPOOL_SYSTEMMEM`` texture for
            locking. If the driver supports ``D3DDEVCAPS_TEXTURESYSTEMMEMORY``,
            ``D3DPOOL_SYSTEMMEM`` is used directly.

        ``default-pool``
            Use ``D3DPOOL_DEFAULT``. (Like ``default``, but never use a
            shadow-texture.)

        ``default-pool-shadow``
            Use ``D3DPOOL_DEFAULT``, with a ``D3DPOOL_SYSTEMMEM`` texture for
            locking. (Like ``default``, but always force the shadow-texture.)

        ``managed``
            Use ``D3DPOOL_MANAGED``.

        ``scratch``
            Use ``D3DPOOL_SCRATCH``, with a ``D3DPOOL_SYSTEMMEM`` texture for
            locking.

    ``swap-discard``
        Use ``D3DSWAPEFFECT_DISCARD``, which might be faster.
        Might be slower too, as it must(?) clear every frame.

    ``exact-backbuffer``
        Always resize the backbuffer to window size.

``direct3d`` (Windows only)
    Same as ``direct3d_shaders``, but with the options ``disable-textures``
    and ``disable-shaders`` forced.

    .. note:: This driver is for compatibility with old systems.

``opengl``
    OpenGL video output driver. It supports extended scaling methods, dithering
    and color management.

    By default, it tries to use fast and fail-safe settings. Use the alias
    ``opengl-hq`` to use this driver with defaults set to high quality
    rendering.

    Requires at least OpenGL 2.1.

    Some features are available with OpenGL 3 capable graphics drivers only
    (or if the necessary extensions are available).

    OpenGL ES 2.0 and 3.0 are supported as well.

    Hardware decoding over OpenGL-interop is supported to some degree. Note
    that in this mode, some corner case might not be gracefully handled, and
    color space conversion and chroma upsampling is generally in the hand of
    the hardware decoder APIs.

    ``opengl`` makes use of FBOs by default. Sometimes you can achieve better
    quality or performance by changing the ``fbo-format`` suboption to
    ``rgb16f``, ``rgb32f`` or ``rgb``. Known problems include Mesa/Intel not
    accepting ``rgb16``, Mesa sometimes not being compiled with float texture
    support, and some OS X setups being very slow with ``rgb16`` but fast
    with ``rgb32f``. If you have problems, you can also try passing the
    ``dumb-mode=yes`` sub-option.

    ``dumb-mode=<yes|no>``
        This mode is extremely restricted, and will disable most extended
        OpenGL features. This includes high quality scalers and custom
        shaders!

        It is intended for hardware that does not support FBOs (including GLES,
        which supports it insufficiently), or to get some more performance out
        of bad or old hardware.

        This mode is forced automatically if needed, and this option is mostly
        useful for debugging. It's also enabled automatically if nothing uses
        features which require FBOs.

        This option might be silently removed in the future.

    ``scale=<filter>``

        ``bilinear``
            Bilinear hardware texture filtering (fastest, very low quality).
            This is the default for compatibility reasons.

        ``spline36``
            Mid quality and speed. This is the default when using ``opengl-hq``.

        ``lanczos``
            Lanczos scaling. Provides mid quality and speed. Generally worse
            than ``spline36``, but it results in a slightly sharper image
            which is good for some content types. The number of taps can be
            controlled with ``scale-radius``, but is best left unchanged.

            This filter corresponds to the old ``lanczos3`` alias if the default
            radius is used, while ``lanczos2`` corresponds to a radius of 2.

            (This filter is an alias for ``sinc``-windowed ``sinc``)

        ``ewa_lanczos``
            Elliptic weighted average Lanczos scaling. Also known as Jinc.
            Relatively slow, but very good quality. The radius can be
            controlled with ``scale-radius``. Increasing the radius makes the
            filter sharper but adds more ringing.

            (This filter is an alias for ``jinc``-windowed ``jinc``)

        ``ewa_lanczossharp``
            A slightly sharpened version of ewa_lanczos, preconfigured to use
            an ideal radius and parameter. If your hardware can run it, this is
            probably what you should use by default.

        ``mitchell``
            Mitchell-Netravali. The ``B`` and ``C`` parameters can be set with
            ``scale-param1`` and ``scale-param2``. This filter is very good at
            downscaling (see ``dscale``).

        ``oversample``
            A version of nearest neighbour that (naively) oversamples pixels,
            so that pixels overlapping edges get linearly interpolated instead
            of rounded. This essentially removes the small imperfections and
            judder artifacts caused by nearest-neighbour interpolation, in
            exchange for adding some blur. This filter is good at temporal
            interpolation, and also known as "smoothmotion" (see ``tscale``).

        ``linear``
            A ``tscale`` filter.

        ``custom``
            A user-defined custom shader (see ``scale-shader``).

        There are some more filters, but most are not as useful. For a complete
        list, pass ``help`` as value, e.g.::

            mpv --vo=opengl:scale=help

    ``scale-param1=<value>``, ``scale-param2=<value>``
        Set filter parameters. Ignored if the filter is not tunable.
        Currently, this affects the following filter parameters:

        bcspline
            Spline parameters (``B`` and ``C``). Defaults to 0.5 for both.

        gaussian
            Scale parameter (``t``). Increasing this makes the result blurrier.
            Defaults to 1.

        oversample
            Minimum distance to an edge before interpolation is used. Setting
            this to 0 will always interpolate edges, whereas setting it to 0.5
            will never interpolate, thus behaving as if the regular nearest
            neighbour algorithm was used. Defaults to 0.0.

    ``scale-blur=<value>``
        Kernel scaling factor (also known as a blur factor). Decreasing this
        makes the result sharper, increasing it makes it blurrier (default 0).
        If set to 0, the kernel's preferred blur factor is used. Note that
        setting this too low (eg. 0.5) leads to bad results. It's generally
        recommended to stick to values between 0.8 and 1.2.

    ``scale-radius=<value>``
        Set radius for filters listed below, must be a float number between 0.5
        and 16.0. Defaults to the filter's preferred radius if not specified.

            ``sinc`` and derivatives, ``jinc`` and derivatives, ``gaussian``, ``box`` and ``triangle``

        Note that depending on filter implementation details and video scaling
        ratio, the radius that actually being used might be different
        (most likely being increased a bit).

    ``scale-antiring=<value>``
        Set the antiringing strength. This tries to eliminate ringing, but can
        introduce other artifacts in the process. Must be a float number
        between 0.0 and 1.0. The default value of 0.0 disables antiringing
        entirely.

        Note that this doesn't affect the special filters ``bilinear`` and
        ``bicubic_fast``.

    ``scale-window=<window>``
        (Advanced users only) Choose a custom windowing function for the kernel.
        Defaults to the filter's preferred window if unset. Use
        ``scale-window=help`` to get a list of supported windowing functions.

    ``scale-wparam=<window>``
        (Advanced users only) Configure the parameter for the window function
        given by ``scale-window``. Ignored if the window is not tunable.
        Currently, this affects the following window parameters:

        kaiser
            Window parameter (alpha). Defaults to 6.33.
        blackman
            Window parameter (alpha). Defaults to 0.16.
        gaussian
            Scale parameter (t). Increasing this makes the window wider.
            Defaults to 1.

    ``scaler-lut-size=<4..10>``
        Set the size of the lookup texture for scaler kernels (default: 6).
        The actual size of the texture is ``2^N`` for an option value of ``N``.
        So the lookup texture with the default setting uses 64 samples.

        All weights are bilinearly interpolated from those samples, so
        increasing the size of lookup table might improve the accuracy of
        scaler.

    ``scaler-resizes-only``
        Disable the scaler if the video image is not resized. In that case,
        ``bilinear`` is used instead whatever is set with ``scale``. Bilinear
        will reproduce the source image perfectly if no scaling is performed.
        Enabled by default. Note that this option never affects ``cscale``.

    ``pbo``
        Enable use of PBOs. On some drivers this can be faster, especially if
        the source video size is huge (e.g. so called "4K" video). On other
        drivers it might be slower or cause latency issues.

        In theory, this can sometimes lead to sporadic and temporary image
        corruption (because reupload is not retried when it fails).

    ``dither-depth=<N|no|auto>``
        Set dither target depth to N. Default: no.

        no
            Disable any dithering done by mpv.
        auto
            Automatic selection. If output bit depth cannot be detected,
            8 bits per component are assumed.
        8
            Dither to 8 bit output.

        Note that the depth of the connected video display device cannot be
        detected. Often, LCD panels will do dithering on their own, which
        conflicts with ``opengl``'s dithering and leads to ugly output.

    ``dither-size-fruit=<2-8>``
        Set the size of the dither matrix (default: 6). The actual size of
        the matrix is ``(2^N) x (2^N)`` for an option value of ``N``, so a
        value of 6 gives a size of 64x64. The matrix is generated at startup
        time, and a large matrix can take rather long to compute (seconds).

        Used in ``dither=fruit`` mode only.

    ``dither=<fruit|ordered|no>``
        Select dithering algorithm (default: fruit). (Normally, the
        ``dither-depth`` option controls whether dithering is enabled.)

    ``temporal-dither``
        Enable temporal dithering. (Only active if dithering is enabled in
        general.) This changes between 8 different dithering patterns on each
        frame by changing the orientation of the tiled dithering matrix.
        Unfortunately, this can lead to flicker on LCD displays, since these
        have a high reaction time.

    ``temporal-dither-period=<1-128>``
        Determines how often the dithering pattern is updated when
        ``temporal-dither`` is in use. 1 (the default) will update on every
        video frame, 2 on every other frame, etc.

    ``debug``
        Check for OpenGL errors, i.e. call ``glGetError()``. Also, request a
        debug OpenGL context (which does nothing with current graphics drivers
        as of this writing).

    ``interpolation``
        Reduce stuttering caused by mismatches in the video fps and display
        refresh rate (also known as judder).

        .. warning:: This requires setting the ``--video-sync`` option to one
                     of the ``display-`` modes, or it will be silently disabled.
                     This was not required before mpv 0.14.0.

        This essentially attempts to interpolate the missing frames by
        convoluting the video along the temporal axis. The filter used can be
        controlled using the ``tscale`` setting.

        Note that this relies on vsync to work, see ``swapinterval`` for more
        information.

    ``swapinterval=<n>``
        Interval in displayed frames between two buffer swaps.
        1 is equivalent to enable VSYNC, 0 to disable VSYNC. Defaults to 1 if
        not specified.

        Note that this depends on proper OpenGL vsync support. On some platforms
        and drivers, this only works reliably when in fullscreen mode. It may
        also require driver-specific hacks if using multiple monitors, to
        ensure mpv syncs to the right one. Compositing window managers can
        also lead to bad results, as can missing or incorrect display FPS
        information (see ``--display-fps``).

    ``dscale=<filter>``
        Like ``scale``, but apply these filters on downscaling instead. If this
        option is unset, the filter implied by ``scale`` will be applied.

    ``cscale=<filter>``
        As ``scale``, but for interpolating chroma information. If the image
        is not subsampled, this option is ignored entirely.

    ``tscale=<filter>``
        The filter used for interpolating the temporal axis (frames). This is
        only used if ``interpolation`` is enabled. The only valid choices
        for ``tscale`` are separable convolution filters (use ``tscale=help``
        to get a list). The default is ``mitchell``.

        Note that the maximum supported filter radius is currently 3, due to
        limitations in the number of video textures that can be loaded
        simultaneously.

    ``tscale-clamp``
        Clamp the ``tscale`` filter kernel's value range to [0-1]. This reduces
        excessive ringing artifacts in the temporal domain (which typically
        manifest themselves as short flashes or fringes of black, mostly
        around moving edges) in exchange for potentially adding more blur.

    ``interpolation-threshold=<0..1,-1>``
        Threshold below which frame ratio interpolation gets disabled (default:
        ``0.0001``). This is calculated as ``abs(disphz/vfps - 1) < threshold``,
        where ``vfps`` is the speed-adjusted display FPS, and ``disphz`` the
        display refresh rate.

        The default is intended to almost always enable interpolation if the
        playback rate is even slightly different from the display refresh rate.
        But note that if you use e.g. ``--video-sync=display-vdrop``, small
        deviations in the rate can disable interpolation and introduce a
        discontinuity every other minute.

        Set this to ``-1`` to disable this logic.

    ``dscale-radius``, ``cscale-radius``, ``tscale-radius``, etc.
        Set filter parameters for ``dscale``, ``cscale`` and ``tscale``,
        respectively.

        See the corresponding options for ``scale``.

    ``linear-scaling``
        Scale in linear light. It should only be used with a ``fbo-format``
        that has at least 16 bit precision.

    ``correct-downscaling``
        When using convolution based filters, extend the filter size
        when downscaling. Increases quality, but reduces performance while
        downscaling.

        This will perform slightly sub-optimally for anamorphic video (but still
        better than without it) since it will extend the size to match only the
        milder of the scale factors between the axes.

    ``pre-shaders=<files>``, ``post-shaders=<files>``, ``scale-shader=<file>``
        Custom GLSL fragment shaders.

        pre-shaders (list)
            These get applied after conversion to RGB and before linearization
            and upscaling. Operates on non-linear RGB (same as input). This is
            the best place to put things like sharpen filters.
        scale-shader
            This gets used instead of scale/cscale when those options are set
            to ``custom``. The colorspace it operates on depends on the values
            of ``linear-scaling`` and ``sigmoid-upscaling``, so no assumptions
            should be made here.
        post-shaders (list)
            These get applied after upscaling and subtitle blending (when
            ``blend-subtitles`` is enabled), but before color management.
            Operates on linear RGB if ``linear-scaling`` is in effect,
            otherwise non-linear RGB. This is the best place for colorspace
            transformations (eg. saturation mapping).

        These files must define a function with the following signature::

            vec4 sample_pixel(sampler2D tex, vec2 pos, vec2 tex_size)

        (If there is no string ``sample_pixel`` in the shader script, it will
        use ``sample`` instead. This is a compatibility hack for older shader
        scripts, and is deprecated.)

        The meanings of the parameters are as follows:

        sampler2D tex
            The source texture for the shader.
        vec2 pos
            The position to be sampled, in coordinate space [0-1].
        vec2 tex_size
            The size of the texture, in pixels. This may differ from image_size,
            eg. for subsampled content or for post-shaders.

        In addition to these parameters, the following uniforms are also
        globally available:

        float random
            A random number in the range [0-1], different per frame.
        int frame
            A simple count of frames rendered, increases by one per frame and
            never resets (regardless of seeks).
        vec2 image_size
            The size in pixels of the input image.
        vec2 target_size
            The size in pixels of the visible part of the scaled (and possibly
            cropped) image.

        For example, a shader that inverts the colors could look like this::

            vec4 sample(sampler2D tex, vec2 pos, vec2 tex_size)
            {
                vec4 color = texture(tex, pos);
                return vec4(1.0 - color.rgb, color.a);
            }

    ``user-shaders=<files>``
        Custom GLSL hooks. These are similar to ``post-shaders`` etc., but more
        flexible: They can be injected at almost arbitrary points in the
        rendering pipeline, and access all previous intermediate textures.

        .. admonition:: Warning

            The syntax is not stable yet and may change any time.

        The general syntax of a user shader looks like this::

            //!METADATA ARGS...
            //!METADATA ARGS...

            vec4 hook() {
               ...
               return something;
            }

            //!METADATA ARGS...
            //!METADATA ARGS...

            ...

        Each block of metadata, along with the non-metadata lines after it,
        defines a single pass. Each pass can set the following metadata:

        HOOK <name> (required)
            The texture which to hook into. May occur multiple times within a
            metadata block, up to a predetermined limit. See below for a list
            of hookable textures.

        BIND <name>
            Loads a texture and makes it available to the pass, and sets up
            macros to enable accessing it. See below for a list of set macros.
            By default, no textures are bound. The special name HOOKED can be
            used to refer to the texture that triggered this pass.

        SAVE <name>
            Gives the name of the texture to save the result of this pass
            into. By default, this is set to the special name HOOKED which has
            the effect of overwriting the hooked texture.

        WIDTH <szexpr>, HEIGHT <szexpr>
            Specifies the size of the resulting texture for this pass.
            ``szexpr`` refers to an expression in RPN (reverse polish
            notation), using the operators + - * / > < !, floating point
            literals, and references to sizes of existing texture and OUTPUT
            (such as MAIN.width or CHROMA.height). By default, these are set to
            HOOKED.w and HOOKED.h, respectively.

        WHEN <szexpr>
            Specifies a condition that needs to be true (non-zero) for the
            shader stage to be evaluated. If it fails, it will silently be
            omitted. (Note that a shader stage like this which has a dependency
            on an optional hook point can still cause that hook point to be
            saved, which has some minor overhead)

        OFFSET ox oy
            Indicates a pixel shift (offset) introduced by this pass. These
            pixel offsets will be accumulated and corrected during the
            next scaling pass (``cscale`` or ``scale``). The default values
            are 0 0 which correspond to no shift. Note that offsets are ignored
            when not overwriting the hooked texture.

        COMPONENTS n
            Specifies how many components of this pass's output are relevant
            and should be stored in the texture, up to 4 (rgba). By default,
            this value is equal to the number of components in HOOKED.

        Each bound texture (via ``BIND``) will make available the following
        definitions to that shader pass, where NAME is the name of the bound
        texture:

        vec4 NAME_tex(vec2 pos)
            The sampling function to use to access the texture at a certain
            spot (in texture coordinate space, range [0,1]). This takes care
            of any necessary normalization conversions.
        vec4 NAME_texOff(vec2 offset)
            Sample the texture at a certain offset in pixels. This works like
            NAME_tex but additionally takes care of necessary rotations, so
            that sampling at e.g. vec2(-1,0) is always one pixel to the left.
        vec2 NAME_pos
            The local texture coordinate of that texture, range [0,1].
        vec2 NAME_size
            The (rotated) size in pixels of the texture.
        mat2 NAME_rot
            The rotation matrix associated with this texture. (Rotates
            pixel space to texture coordinates)
        vec2 NAME_pt
            The (unrotated) size of a single pixel, range [0,1].
        sampler NAME_raw
            The raw bound texture itself. The use of this should be
            avoided unless absolutely necessary.

        In addition, the global uniforms described in ``post-shaders`` are
        also available.

        Internally, vo_opengl may generate any number of the following
        textures. Whenever a texture is rendered and saved by vo_opengl, all of
        the passes that have hooked into it will run, in the order they were
        added by the user. This is a list of the legal hook points:

        RGB, LUMA, CHROMA, ALPHA, XYZ (resizable)
            Source planes (raw). Which of these fire depends on the image
            format of the source.

        CHROMA_SCALED, ALPHA_SCALED (fixed)
            Source planes (upscaled). These only fire on subsampled content.

        NATIVE (resizable)
            The combined image, in the source colorspace, before conversion
            to RGB.

        MAINPRESUB (resizable)
            The image, after conversion to RGB, but before
            ``blend-subtitles=video`` is applied.

        MAIN (resizable)
            The main image, after conversion to RGB but before upscaling.

        LINEAR (fixed)
            Linear light image, before scaling. This only fires when
            ``linear-scaling`` is in effect.

        SIGMOID (fixed)
            Sigmoidized light, before scaling. This only fires when
            ``sigmoid-upscaling`` is in effect.

        PREKERNEL (fixed)
            The image immediately before the scaler kernel runs.

        POSTKERNEL (fixed)
            The image immediately after the scaler kernel runs.

        SCALED (fixed)
            The final upscaled image, before color management.

        OUTPUT (fixed)
            The final output image, after color management but before
            dithering and drawing to screen.

        Only the textures labelled with ``resizable`` may be transformed by the
        pass. When overwriting a texture marked ``fixed``, the WIDTH, HEIGHT
        and OFFSET must be left at their default values.

    ``deband``
        Enable the debanding algorithm. This greatly reduces the amount of
        visible banding, blocking and other quantization artifacts, at the
        expensive of very slightly blurring some of the finest details. In
        practice, it's virtually always an improvement - the only reason to
        disable it would be for performance.

    ``deband-iterations=<1..16>``
        The number of debanding steps to perform per sample. Each step reduces
        a bit more banding, but takes time to compute. Note that the strength
        of each step falls off very quickly, so high numbers (>4) are
        practically useless. (Default 1)

    ``deband-threshold=<0..4096>``
        The debanding filter's cut-off threshold. Higher numbers increase the
        debanding strength dramatically but progressively diminish image
        details. (Default 64)

    ``deband-range=<1..64>``
        The debanding filter's initial radius. The radius increases linearly
        for each iteration. A higher radius will find more gradients, but
        a lower radius will smooth more aggressively. (Default 16)

        If you increase the ``deband-iterations``, you should probably
        decrease this to compensate.

    ``deband-grain=<0..4096>``
        Add some extra noise to the image. This significantly helps cover up
        remaining quantization artifacts. Higher numbers add more noise.
        (Default 48)

    ``sigmoid-upscaling``
        When upscaling, use a sigmoidal color transform to avoid emphasizing
        ringing artifacts. This also implies ``linear-scaling``.

    ``sigmoid-center``
        The center of the sigmoid curve used for ``sigmoid-upscaling``, must
        be a float between 0.0 and 1.0. Defaults to 0.75 if not specified.

    ``sigmoid-slope``
        The slope of the sigmoid curve used for ``sigmoid-upscaling``, must
        be a float between 1.0 and 20.0. Defaults to 6.5 if not specified.

    ``sharpen=<value>``
        If set to a value other than 0, enable an unsharp masking filter.
        Positive values will sharpen the image (but add more ringing and
        aliasing). Negative values will blur the image. If your GPU is powerful
        enough, consider alternatives like the ``ewa_lanczossharp`` scale
        filter, or the ``scale-blur`` sub-option.

        (This feature is the replacement for the old ``sharpen3`` and
        ``sharpen5`` scalers.)

    ``glfinish``
        Call ``glFinish()`` before and after swapping buffers (default: disabled).
        Slower, but might improve results when doing framedropping.
        Can completely ruin performance. The details depend entirely on the
        OpenGL driver.

    ``waitvsync``
        Call ``glXWaitVideoSyncSGI`` after each buffer swap (default: disabled).
        This may or may not help with video timing accuracy and frame drop. It's
        possible that this makes video output slower, or has no effect at all.

        X11/GLX only.

    ``vsync-fences=<N>``
        Synchronize the CPU to the Nth past frame using the ``GL_ARB_sync``
        extension. A value of 0 disables this behavior (default). A value of
        1 means it will synchronize to the current frame after rendering it.
        Like ``glfinish`` and ``waitvsync``, this can lower or ruin performance.
        Its advantage is that it can span multiple frames, and effectively limit
        the number of frames the GPU queues ahead (which also has an influence
        on vsync).

    ``dwmflush=<no|windowed|yes|auto>``
        Calls ``DwmFlush`` after swapping buffers on Windows (default: auto).
        It also sets ``SwapInterval(0)`` to ignore the OpenGL timing. Values
        are: no (disabled), windowed (only in windowed mode), yes (also in
        full screen).

        The value ``auto`` will try to determine whether the compositor is
        active, and calls ``DwmFlush`` only if it seems to be.

        This may help to get more consistent frame intervals, especially with
        high-fps clips - which might also reduce dropped frames. Typically, a
        value of ``windowed`` should be enough, since full screen may bypass the
        DWM.

        Windows only.

    ``sw``
        Continue even if a software renderer is detected.

    ``backend=<sys>``
        The value ``auto`` (the default) selects the windowing backend. You
        can also pass ``help`` to get a complete list of compiled in backends
        (sorted by autoprobe order).

        auto
            auto-select (default)
        cocoa
            Cocoa/OS X
        win
            Win32/WGL
        angle
            Direct3D11 through the OpenGL ES translation layer ANGLE. This
            supports almost everything the ``win`` backend does (if the ANGLE
            build is new enough).
        dxinterop (experimental)
            Win32, using WGL for rendering and Direct3D 9Ex for presentation.
            Works on Nvidia and AMD. Newer Intel chips with the latest drivers
            may also work.
        x11
            X11/GLX
        wayland
            Wayland/EGL
        drm-egl
            DRM/EGL
        x11egl
            X11/EGL

    ``es=<mode>``
        Select whether to use GLES:

        yes
            Try to prefer ES over Desktop GL
        no
            Try to prefer desktop GL over ES
        auto
            Use the default for each backend (default)

    ``fbo-format=<fmt>``
        Selects the internal format of textures used for FBOs. The format can
        influence performance and quality of the video output.
        ``fmt`` can be one of: rgb8, rgb10, rgb10_a2, rgb16, rgb16f,
        rgb32f, rgba12, rgba16, rgba16f, rgba32f.
        Default: ``auto``, which maps to rgba16 on desktop GL, and rgba16f or
        rgb10_a2 on GLES (e.g. ANGLE), unless GL_EXT_texture_norm16 is
        available.

    ``gamma=<0.1..2.0>``
        Set a gamma value (default: 1.0). If gamma is adjusted in other ways
        (like with the ``--gamma`` option or key bindings and the ``gamma``
        property), the value is multiplied with the other gamma value.

        Recommended values based on the environmental brightness:

        1.0
            Brightly illuminated (default)
        0.9
            Slightly dim
        0.8
            Pitch black room

        NOTE: Typical movie content (Blu-ray etc.) already contains a gamma
        drop of about 0.8, so specifying it here as well will result in even
        even darker image than intended!

    ``gamma-auto``
        Automatically corrects the gamma value depending on ambient lighting
        conditions (adding a gamma boost for dark rooms).

        With ambient illuminance of 64lux, mpv will pick the 1.0 gamma value
        (no boost), and slightly increase the boost up until 0.8 for 16lux.

        NOTE: Only implemented on OS X.

    ``target-prim=<value>``
        Specifies the primaries of the display. Video colors will be adapted to
        this colorspace when ICC color management is not being used. Valid
        values are:

        auto
            Disable any adaptation (default)
        bt.470m
            ITU-R BT.470 M
        bt.601-525
            ITU-R BT.601 (525-line SD systems, eg. NTSC), SMPTE 170M/240M
        bt.601-625
            ITU-R BT.601 (625-line SD systems, eg. PAL/SECAM), ITU-R BT.470 B/G
        bt.709
            ITU-R BT.709 (HD), IEC 61966-2-4 (sRGB), SMPTE RP177 Annex B
        bt.2020
            ITU-R BT.2020 (UHD)
        apple
            Apple RGB
        adobe
            Adobe RGB (1998)
        prophoto
            ProPhoto RGB (ROMM)
        cie1931
            CIE 1931 RGB (not to be confused with CIE XYZ)
        dci-p3
            DCI-P3 (Digital Cinema Colorspace), SMPTE RP431-2
        v-gamut
            Panasonic V-Gamut (VARICAM) primaries

    ``target-trc=<value>``
        Specifies the transfer characteristics (gamma) of the display. Video
        colors will be adjusted to this curve when ICC color management is
        not being used. Valid values are:

        auto
            Disable any adaptation (default)
        bt.1886
            ITU-R BT.1886 curve (assuming infinite contrast)
        srgb
            IEC 61966-2-4 (sRGB)
        linear
            Linear light output
        gamma1.8
            Pure power curve (gamma 1.8), also used for Apple RGB
        gamma2.2
            Pure power curve (gamma 2.2)
        gamma2.8
            Pure power curve (gamma 2.8), also used for BT.470-BG
        prophoto
            ProPhoto RGB (ROMM)
        st2084
            SMPTE ST2084 (HDR) curve, PQ OETF
        std-b67
            ARIB STD-B67 (Hybrid Log-gamma) curve, also known as BBC/NHK HDR
        v-log
            Panasonic V-Log (VARICAM) curve

        NOTE: When using HDR output formats, mpv will encode to the specified
              curve but it will not set any HDMI flags or other signalling that
              might be required for the target device to correctly display the
              HDR signal. The user should independently guarantee this before
              using these signal formats for display.

    ``target-brightness=<1..100000>``
        Specifies the display's approximate brightness in cd/m^2. When playing
        HDR content on a SDR display (or SDR content on an HDR display), video
        colors will be tone mapped to this target brightness using the
        algorithm specified by ``hdr-tone-mapping``. The default of 250 cd/m^2
        corresponds to a typical consumer display.

    ``hdr-tone-mapping=<value>``
        Specifies the algorithm used for tone-mapping HDR images onto the
        target display. Valid values are:

        clip
            Hard-clip any out-of-range values.
        reinhard
            Reinhard tone mapping algorithm. Very simple continuous curve.
            Preserves dynamic range and peak but uses nonlinear contrast.
        hable
            Similar to ``reinhard`` but preserves dark contrast better
            (slightly sigmoidal). Developed by John Hable for use in video
            games. (default)
        gamma
            Fits a logarithmic transfer between the tone curves.
        linear
            Linearly stretches the entire reference gamut to (a linear multiple
            of) the display.

    ``tone-mapping-param=<value>``
        Set tone mapping parameters. Ignored if the tone mapping algorithm is
        not tunable. This affects the following tone mapping algorithms:

        reinhard
            Specifies the local contrast coefficient at the display peak.
            Defaults to 0.5, which means that in-gamut values will be about
            half as bright as when clipping.
        gamma
            Specifies the exponent of the function. Defaults to 1.8.
        linear
            Specifies the scale factor to use while stretching. Defaults to
            1.0.

    ``icc-profile=<file>``
        Load an ICC profile and use it to transform video RGB to screen output.
        Needs LittleCMS 2 support compiled in. This option overrides the
        ``target-prim``, ``target-trc`` and ``icc-profile-auto`` options.

    ``icc-profile-auto``
        Automatically select the ICC display profile currently specified by
        the display settings of the operating system.

        NOTE: On Windows, the default profile must be an ICC profile. WCS
        profiles are not supported.

    ``icc-cache-dir=<dirname>``
        Store and load the 3D LUTs created from the ICC profile in this directory.
        This can be used to speed up loading, since LittleCMS 2 can take a while
        to create a 3D LUT. Note that these files contain uncompressed LUTs.
        Their size depends on the ``3dlut-size``, and can be very big.

        NOTE: This is not cleaned automatically, so old, unused cache files
        may stick around indefinitely.

    ``icc-intent=<value>``
        Specifies the ICC intent used for the color transformation (when using
        ``icc-profile``).

        0
            perceptual
        1
            relative colorimetric (default)
        2
            saturation
        3
            absolute colorimetric

    ``3dlut-size=<r>x<g>x<b>``
        Size of the 3D LUT generated from the ICC profile in each dimension.
        Default is 128x256x64.
        Sizes must be a power of two, and 512 at most.

    ``icc-contrast=<0-100000>``
        Specifies an upper limit on the target device's contrast ratio.
        This is detected automatically from the profile if possible, but for
        some profiles it might be missing, causing the contrast to be assumed
        as infinite. As a result, video may appear darker than intended. This
        only affects BT.1886 content. The default of 0 means no limit.

    ``blend-subtitles=<yes|video|no>``
        Blend subtitles directly onto upscaled video frames, before
        interpolation and/or color management (default: no). Enabling this
        causes subtitles to be affected by ``icc-profile``, ``target-prim``,
        ``target-trc``, ``interpolation``, ``gamma`` and ``post-shader``. It
        also increases subtitle performance when using ``interpolation``.

        The downside of enabling this is that it restricts subtitles to the
        visible portion of the video, so you can't have subtitles exist in the
        black margins below a video (for example).

        If ``video`` is selected, the behavior is similar to ``yes``, but subs
        are drawn at the video's native resolution, and scaled along with the
        video.

        .. warning:: This changes the way subtitle colors are handled. Normally,
                     subtitle colors are assumed to be in sRGB and color managed
                     as such. Enabling this makes them treated as being in the
                     video's color space instead. This is good if you want
                     things like softsubbed ASS signs to match the video colors,
                     but may cause SRT subtitles or similar to look slightly off.

    ``alpha=<blend-tiles|blend|yes|no>``
        Decides what to do if the input has an alpha component.

        blend-tiles
            Blend the frame against a 16x16 gray/white tiles background (default).
        blend
            Blend the frame against a black background.
        yes
            Try to create a framebuffer with alpha component. This only makes sense
            if the video contains alpha information (which is extremely rare). May
            not be supported on all platforms. If alpha framebuffers are
            unavailable, it silently falls back on a normal framebuffer. Note
            that if you set the ``fbo-format`` option to a non-default value,
            a format with alpha must be specified, or this won't work.
        no
            Ignore alpha component.

    ``rectangle-textures``
        Force use of rectangle textures (default: no). Normally this shouldn't
        have any advantages over normal textures. Note that hardware decoding
        overrides this flag.

    ``background=<color>``
        Color used to draw parts of the mpv window not covered by video.
        See ``--osd-color`` option how colors are defined.

``opengl-hq``
    Same as ``opengl``, but with default settings for high quality rendering.

    This is equivalent to::

        --vo=opengl:scale=spline36:cscale=spline36:dscale=mitchell:dither-depth=auto:correct-downscaling:sigmoid-upscaling:deband:es=no

    Note that some cheaper LCDs do dithering that gravely interferes with
    ``opengl``'s dithering. Disabling dithering with ``dither-depth=no`` helps.

``sdl``
    SDL 2.0+ Render video output driver, depending on system with or without
    hardware acceleration. Should work on all platforms supported by SDL 2.0.
    For tuning, refer to your copy of the file ``SDL_hints.h``.

    .. note:: This driver is for compatibility with systems that don't provide
              proper graphics drivers, or which support GLES only.

    ``sw``
        Continue even if a software renderer is detected.

    ``switch-mode``
        Instruct SDL to switch the monitor video mode when going fullscreen.

``vaapi``
    Intel VA API video output driver with support for hardware decoding. Note
    that there is absolutely no reason to use this, other than wanting to use
    hardware decoding to save power on laptops, or possibly preventing video
    tearing with some setups.

    .. note:: This driver is for compatibility with crappy systems. You can
              use vaapi hardware decoding with ``--vo=opengl`` too.

    ``scaling=<algorithm>``
        default
            Driver default (mpv default as well).
        fast
            Fast, but low quality.
        hq
            Unspecified driver dependent high-quality scaling, slow.
        nla
            ``non-linear anamorphic scaling``

    ``deint-mode=<mode>``
        Select deinterlacing algorithm. Note that by default deinterlacing is
        initially always off, and needs to be enabled with the ``d`` key
        (default key binding for ``cycle deinterlace``).

        This option doesn't apply if libva supports video post processing (vpp).
        In this case, the default for ``deint-mode`` is ``no``, and enabling
        deinterlacing via user interaction using the methods mentioned above
        actually inserts the ``vavpp`` video filter. If vpp is not actually
        supported with the libva backend in use, you can use this option to
        forcibly enable VO based deinterlacing.

        no
            Don't allow deinterlacing (default for newer libva).
        first-field
            Show only first field (going by ``--field-dominance``).
        bob
            bob deinterlacing (default for older libva).

    ``scaled-osd=<yes|no>``
        If enabled, then the OSD is rendered at video resolution and scaled to
        display resolution. By default, this is disabled, and the OSD is
        rendered at display resolution if the driver supports it.

``null``
    Produces no video output. Useful for benchmarking.

    Usually, it's better to disable video with ``--no-video`` instead.

    ``fps=<value>``
        Simulate display FPS. This artificially limits how many frames the
        VO accepts per second.

``caca``
    Color ASCII art video output driver that works on a text console.

    .. note:: This driver is a joke.

``image``
    Output each frame into an image file in the current directory. Each file
    takes the frame number padded with leading zeros as name.

    ``format=<format>``
        Select the image file format.

        jpg
            JPEG files, extension .jpg. (Default.)
        jpeg
            JPEG files, extension .jpeg.
        png
            PNG files.
        ppm
            Portable bitmap format.
        pgm
            Portable graymap format.
        pgmyuv
            Portable graymap format, using the YV12 pixel format.
        tga
            Truevision TGA.

    ``png-compression=<0-9>``
        PNG compression factor (speed vs. file size tradeoff) (default: 7)
    ``png-filter=<0-5>``
        Filter applied prior to PNG compression (0 = none; 1 = sub; 2 = up;
        3 = average; 4 = Paeth; 5 = mixed) (default: 5)
    ``jpeg-quality=<0-100>``
        JPEG quality factor (default: 90)
    ``(no-)jpeg-progressive``
        Specify standard or progressive JPEG (default: no).
    ``(no-)jpeg-baseline``
        Specify use of JPEG baseline or not (default: yes).
    ``jpeg-optimize=<0-100>``
        JPEG optimization factor (default: 100)
    ``jpeg-smooth=<0-100>``
        smooth factor (default: 0)
    ``jpeg-dpi=<1->``
        JPEG DPI (default: 72)
    ``outdir=<dirname>``
        Specify the directory to save the image files to (default: ``./``).

``wayland`` (Wayland only)
    Wayland shared memory video output as fallback for ``opengl``.

    .. note:: This driver is for compatibility with systems that don't provide
              working OpenGL drivers.

    ``alpha``
        Use a buffer format that supports videos and images with alpha
        information
    ``rgb565``
        Use RGB565 as buffer format. This format is implemented on most
        platforms, especially on embedded where it is far more efficient then
        RGB8888.
    ``triple-buffering``
        Use 3 buffers instead of 2. This can lead to more fluid playback, but
        uses more memory.

``opengl-cb``
    For use with libmpv direct OpenGL embedding; useless in any other contexts.
    (See ``<mpv/opengl_cb.h>``.)

    This also supports many of the suboptions the ``opengl`` VO has. Run
    ``mpv --vo=opengl-cb:help`` for a list.

    This also supports the ``vo-cmdline`` command.

``rpi`` (Raspberry Pi)
    Native video output on the Raspberry Pi using the MMAL API.

    ``display=<number>``
        Select the display number on which the video overlay should be shown
        (default: 0).

    ``layer=<number>``
        Select the dispmanx layer on which the video overlay should be shown
        (default: -10). Note that mpv will also use the 2 layers above the
        selected layer, to handle the window background and OSD. Actual video
        rendering will happen on the layer above the selected layer.

    ``background=<yes|no>``
        Whether to render a black background behind the video (default: no).
        Normally it's better to kill the console framebuffer instead, which
        gives better performance.

    ``osd=<yes|no>``
        Enabled by default. If disabled with ``no``, no OSD layer is created.
        This also means there will be no subtitles rendered.

``drm`` (Direct Rendering Manager)
    Video output driver using Kernel Mode Setting / Direct Rendering Manager.
    Should be used when one doesn't want to install full-blown graphical
    environment (e.g. no X). Does not support hardware acceleration (if you
    need this, check the ``drm-egl`` backend for ``opengl`` VO).

    ``connector=<number>``
        Select the connector to use (usually this is a monitor.) If set to -1,
        mpv renders the output on the first available connector. (default: -1)

    ``devpath=<filename>``
        Path to graphic card device.
        (default: /dev/dri/card0)

    ``mode=<number>``
        Mode ID to use (resolution, bit depth and frame rate).
        (default: 0)