mpv/DOCS/xml/README

106 lines
3.4 KiB
Plaintext

Tools required for building the documentation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* GNU make 3.80 or later
* DocBook 4.1.2 or later
* The DocBook XML DTD (also known as DocBk XML)
* DocBook XSL stylesheets -- version 1.50.0 or later is recommended.
I am not quite sure which tools work, but I used the following
ones successfully, so they are required:
* xmllint (part of libxml2) is used for validation.
* xsltproc (part of libxslt1) is used for transforming XML files into HTML
files. Version 1.0.18 or later is recommended.
It's also possible to use the Saxon XSLT Processor. The Russian translator
used it (version 6.4.4) for a while. If you have a suitable JavaVM and a
saxon.jar installed somewhere, configure will try to detect them. If
autodetection fails, try to tweak DOCS/xml/configure to get it working and
send us a patch :)
On Red Hat systems you need the following packages:
libxml2, libxslt, docbook-dtds, docbook-style-xsl
On Debian Sarge you will need these packages:
docbook-xml, docbook-xsl, xsltproc, libxml2-utils
Installing the required tools from source
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Download libxslt AND libxml2 packages from
http://xmlsoft.org/XSLT/downloads.html
Installing them should be straightforward, execute the usual "./configure"
and "make" then "make install" commands.
2) Download the docbook-xml package from http://www.oasis-open.org/docbook/xml/
Use the newest version. The URL will be something like this:
http://www.oasis-open.org/docbook/xml/4.2/docbook-xml-4.2.zip
Extract this package into a directory, enter it, and execute the following
commands:
mkdir -p /usr/share/sgml/docbook/dtd/xml/4.2/
cp -r * /usr/share/sgml/docbook/dtd/xml/4.2/
3) Download the docbook-xsl package from
http://prdownloads.sourceforge.net/docbook/
Use the newest version. The URL will be something like this:
http://prdownloads.sourceforge.net/docbook/docbook-xsl-1.62.0.tar.gz
Extract this package into a directory, enter it, and execute the following
commands:
mkdir -p /usr/share/sgml/docbook/stylesheet/xsl/nwalsh
cp -r VERSION common html lib \
/usr/share/sgml/docbook/stylesheet/xsl/nwalsh
Building the documentation
~~~~~~~~~~~~~~~~~~~~~~~~~~
Before trying to build the documentation, run
make help
to see all available build targets and make your choice. If something goes
wrong, check the Configuration section of the toplevel Makefile and adjust
the variables.
A few words about SGML catalog files
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As far as I know, the document type declaration in XML files requires
both a public and a system identifier. For example:
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"/usr/share/sgml/docbook/dtd/xml/4.1.2/docbookx.dtd">
where
"-//OASIS//DTD DocBook XML V4.1.2//EN"
is the public, and
"/usr/share/sgml/docbook/dtd/xml/4.1.2/docbookx.dtd"
is the system identifier.
The problem is that the system identifier is most probably system-dependent.
To avoid the need to manually fix the system identifiers before building the
documentation, I've decided to use SGML catalogs. If you have your catalogs
set up correctly, xmllint and xsltproc will use them to find the DTDs
based on the public identifiers.
Note that this works only if public identifiers override system identifiers
(i.e. the catalog file must contain 'OVERRIDE YES'). (I had no problem with
these on my system, since the Debian people took care of everything. ;-))