mpv/DOCS/cd-dvd.html

233 lines
11 KiB
HTML

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<HTML>
<HEAD>
<TITLE>CD, DVD, VCD - MPlayer - The Movie Player for Linux</TITLE>
<LINK REL="stylesheet" TYPE="text/css" HREF="default.css">
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
</HEAD>
<BODY>
<H2><A NAME="drives">4.1 CD/DVD drives</A></H2>
<P>Linux documentation excerpt:</P>
<P>Modern CD-ROM drives can attain very high head speeds, yet some CD-ROM drives
are capable of running at reduced speeds. There are several reasons that might
make you consider changing the speed of a CD-ROM drive:</P>
<UL>
<LI>There have been reports of read errors at these high speeds, especially
with badly pressed CD-ROMs. Reducing the speed can prevent data loss under
these circumstances.</LI>
<LI>Many CD-ROM drives are annoyingly loud, a lower speed may reduce the
noise.</LI>
</UL>
<P>You can reduce the drive speed with hdparm or a program called setcd.
It works like this:</P>
<P>&nbsp;&nbsp;&nbsp;&nbsp;<CODE>hdparm -E [speed] [cdrom device]</CODE></P>
<P>&nbsp;&nbsp;&nbsp;&nbsp;<CODE>setcd -x [speed] [cdrom device]</CODE></P>
<P>You can also try</P>
<P>&nbsp;&nbsp;&nbsp;&nbsp;<CODE>echo current_speed:4 &gt; /proc/ide/[cdrom device]/settings</CODE></P>
<P>but you will need root privileges. The following command may also help:</P>
<P>&nbsp;&nbsp;&nbsp;&nbsp;<CODE>echo file_readahead:2000000 &gt; /proc/ide/[cdrom device]/settings</CODE></P>
<P>This sets prefetched file reading to 2MB, which helps with scratched CD-ROMs.
It is recommended that you also tune your CD-ROM drive with hdparm:</P>
<P>&nbsp;&nbsp;&nbsp;&nbsp;<CODE>hdparm -d1 -a8 -u1 (cdrom device)</CODE></P>
<P>This enables DMA access, read-ahead, and IRQ unmasking (read the hdparm man
page for a detailed explanation).</P>
<P>Please refer to "<CODE>/proc/ide/[cdrom device]/settings</CODE>" for
fine-tuning your CD-ROM.</P>
<P>FreeBSD:</P>
<P>&nbsp;&nbsp;&nbsp;&nbsp;Speed: <CODE>cdcontrol [-f device] speed [speed]</CODE></P>
<P>&nbsp;&nbsp;&nbsp;&nbsp;DMA: <CODE>sysctl hw.ata.atapi_dma=1</CODE></P>
<H2><A NAME="dvd">4.2 DVD playback</A></H2>
<P>For the complete list of available options, please read the man page.</P>
<H4>New-style DVD support (mpdvdkit2)</H4>
<P>MPlayer uses <CODE>libdvdread</CODE> and <CODE>libdvdcss</CODE> for
DVD decryption and playback. These two libraries are contained in the
<CODE>libmpdvdkit2/</CODE> subdirectory of the MPlayer source tree, you
do not have to install them separately. We opted for this solution because
we had to fix a libdvdread bug, and apply a patch which adds <B>cracked CSS
keys caching support</B> to libdvdcss. This results in a large speed increase
because the keys do not have to be cracked every time before playing.</P>
<P>MPlayer can also use system-wide <CODE>libdvdread</CODE> and
<CODE>libdvdcss</CODE> libraries, but this solution is <B>not</B> recommended,
as it can result in bugs, library incompatibilities, and slower speed.</P>
<H4>DVD Navigation support (dvdnav)</H4>
<P>Support for DVD navigation via <CODE>dvdnav</CODE> was being worked on, but
it was never finished properly and is therefore not recommended.</P>
<H4>Old-style DVD support - OPTIONAL</H4>
<P>Useful if you want to play encoded VOBs from <B>hard disk</B>. Compile and
install <B>libcss</B> 0.0.1 (not newer) for this (If MPlayer fails to
detect it, use the <CODE>-csslib /path/to/libcss.so</CODE> option). You need
to be root or use a suid root binary to use it.</P>
<H4>DVD structure</H4>
<P>DVD disks use all 2048 b/s sectors with ecc/crc. They usually have an UDF
filesystem on a single track, containing various files (small .IFO and .BUK
files and big (1GB) .VOB files). They are real files and can be copied/played
from a mounted file system of an unencrypted DVD.</P>
<P>The .IFO files contain the movie navigation informations (chapter/title/angle
map, language table, etc) and is needed to read and interpret the .VOB content
(movie). The .BUK files are backups of them. They use <B>sectors</B> everywhere,
so you need to use raw addressing of sectors of the disc to implement DVD
navigation. It's also needed to decrypt the content.</P>
<P>The whole old-style DVD support with libcss needs therefore a mounted DVD
filesystem and a raw sector-based access to the device. Unfortunately you must
be root (under Linux) to get the sector address of a file. You got two choices:</P>
<UL>
<LI>Force the user to be root or use a suid root mplayer binary like
fibmap_mplayer which does the dvd access for the old-style DVD playback
over libcss.</LI>
<LI>Don't use the kernel's filesystem driver at all and re-implement it in
userspace. libdvdread 0.9.x and libmpdvdkit does this (New-style DVD
support). The kernel udf filesystem drivers isn't needed as they already
have their own, built-in udf fs driver. Also the dvd, doesn't needs to be
mounted as only the raw sector-based access is used.</LI>
</UL>
<P>Sometimes /dev/dvd can't be read by users, so the libdvdread authors
implemented an emulation layer which transfers sector addresses to
filenames+offsets, to emulate raw access on the top of a mounted filesystem
or even on a hard disk.</P>
<P>libdvdread even accepts the mountpoint instead of the device name for raw
access and checks in <CODE>/proc/mounts</CODE> to get the device name. It was
developed for Solaris, where device names are dynamically allocated.</P>
<P>The default DVD device is <CODE>/dev/dvd</CODE>. If your setup differs,
make a symlink, or specify the correct device on the command line with the
<CODE>-dvd-device</CODE> option.</P>
<H4>DVD authentication</H4>
<P>The authentication and decryption method of the new-style DVD support is done
using a patched libdvdcss (see above). The method can be specified over the
environment variable <CODE>DVDCSS_METHOD</CODE> which can be set to
<CODE>key</CODE>, <CODE>disk</CODE> or <CODE>title</CODE>.</P>
<P>If nothing is specified it tries the following methods
(default: key, title request):</P>
<OL>
<LI><B>bus key:</B> This key is negotiated during authentication (a long mix
of ioctls and various key exchanges, crypto stuff) and is used to encrypt
the title and disk keys before sending them over the unprotected bus
(to prevent eavesdropping). The bus key is needed to get and predecrypt the
crypted disk key.
<LI><B>cached key:</B> MPlayer looks for eventually already cracked
title keys which are stored in the <CODE>~/.mplayer/DVDKeys</CODE> directory
(fast ;).</LI>
<LI><B>key:</B> If no cached key is available, MPlayer tries to
decrypt the disk key with a set of included player keys.
<LI><B>disk:</B> If the key method fails (e.g. no included player keys),
MPlayer will crack the disk key using a brute force algorithm.
This process is CPU intensive and requires 64 MB of memory (16M 32bit
entries hash table) to store temporary data. This method should always
work (slow).</LI>
<LI><B>title request:</B>With the disk key MPlayer requests the crypted title
keys, which are inside <I>hidden sectors</I> using <CODE>ioctl()</CODE>.
The region protection of RPC-2 drives is performed in this step and may
fail on such drives. If it succeeds, the title keys will be decrypted with
the bus and disk key.
<LI><B>title:</B> This method is used if the title request failed and does
not rely on any key exchange with the DVD drive. It uses a crypto attack to
guess the title key directly (by finding a repeating pattern in the
decrypted VOB content and guessing that that the plain text for first
encrypted bytes are a continuation of that pattern).
The method is also known as "known plaintext attack" or "DeCSSPlus".
In rare cases this may fail because there is not enough encrypted data on
the disk to perform a statistical attack or because the key changes in the
middle of a title. On the other hand it is the only way to decrypt a DVD
stored on a hard disk or a DVD with the wrong region on an RPC2 drive
(slow).</LI>
</OL>
<P>RPC-1 DVD drives only protect region settings over software DVD players.
RPC-2 drives have a hardware protection that allows 5 changes only. It might
be needed/recommended to upgrade the firmware to RPC-1 if you have a RPC-2 DVD
drive. Firmware upgrades can be found
<A HREF="http://perso.club-internet.fr/farzeno/firmware/">here</A>. If there is
no firmware upgrade available for your device, use the
<A HREF="http://www.linuxtv.org/download/dvd/dvd_disc_20000215.tar.gz">regionset
tool</A> to set the region code of your DVD-drive (under Linux).
<B>Warning:</B> You can only set the region 5 times.</P>
<H2><A NAME="vcd">4.3 VCD playback</A></H2>
<P>For the complete list of available options, please read the man page.
The Syntax for a standard Video CD (VCD) is as followed:
<CODE>mplayer -vcd &lt;track&gt; [-cdrom-device &lt;device&gt;]</CODE>.<BR>
Example: <CODE>mplayer -vcd 2 -cdrom-device /dev/hdc</CODE></P>
<H4>VCD structure</H4>
<P>VCD disks consists of 2 or more track:</P>
<UL>
<LI>The first track is a few MB 2048 bytes/sector data track, with an iso9660
filesystem, usualy containing win32 VCD player programs and maybe other infos
(jpegs, text, etc).</LI>
<LI>The second and other tracks are raw 2324 bytes/sector mpeg tracks, without
any filesystem but raw mpeg ps data, one packet per sector. they contain the
movie(s)... The tracks <B>can't be mounted</B>! It is similar to audio
tracks (e.g. You never mounted an audio cd to play it, or did you? No).
As most movies are inside track too, you should try <CODE>-vcd 2</CODE>
first.</LI>
<LI>There exist VCD disks without the first track too (single track and no
filesystems at all). They are still playable, but can't be mounted.</LI>
</UL>
<P>About .DAT files:</P>
<P>The ~600 MB file visible on the first track of the mounted vcd isn't a real
track! It's a so called iso gateway, created to allow Windows to handle such
tracks (Windows doesn't allow raw device access to applications at all).
Under linux, you cannot copy or play such files (they contain garbage).
Under Windows it is possible as its iso9660 driver emulates the raw reading of
tracks in this file.
To play a .DAT file you need a kernel driver which can be found on a powerdvd
Linux version. It is a modified iso9660 fs driver, which is able to emulate the
raw tracks through this shadow .DAT file. If you mount the disc using their
driver, you can copy and even play .DAT files with mplayer. But it <B>won't
work</B> with the standard iso9660 driver of the kernel! It is recommended to
use the <CODE>-vcd</CODE> option instead.</P>
<P>The default VCD device is <CODE>/dev/cdrom</CODE>. If your setup differs,
make a symlink, or specify the correct device on the command line with the
<CODE>-cdrom-device</CODE> option.</P>
</BODY>
</HTML>