mirror of
https://github.com/mpv-player/mpv
synced 2024-12-26 00:42:57 +00:00
6a833797db
This commit: - Changes some of the #define and variable names for clarification and adds comments where appropriate. - Unifies :srgb and :icc-profile, making them fit into the same step of the decoding process and removing the weird interactions between both of them. - Makes :icc-profile take precedence over :srgb (to significantly reduce the number of confusing and useless special cases) - Moves BT709 decompanding (approximate or actual) to the shader in all cases, making it happen before upscaling (instead of the old 0.45 gamma function). This is the simpler and more proper way to do it. - Enables the approx gamma function to work with :srgb as well due to this (since they now share the gamma expansion code). - Renames :icc-approx-gamma to :approx-gamma since it is no longer tied to the ICC options or LittleCMS. - Uses gamma 2.4 as input space for the actual 3DLUT, this is now a pretty arbitrary factor but I picked 2.4 mainly because a higher pure power value here seems to produce visually better results with wide gamut profiles, rather then the previous 1.95 or BT.709. - Adds the input gamma space to the 3dlut cache header in case we change it more in the future, or even make it user customizable (though I don't see why the latter would really be necessary). - Fixes the OSD's gamma when using :srgb, which was previously still using the old (0.45) approximation in all cases. - Updates documentation on :srgb, it was still mentioning the old behavior from circa a year ago. This commit should serve to both open up and make the CMS/shader code much more accessible and less confusing/error-prone and simultaneously also improve the performance of 3DLUTs with wide gamut color spaces. I would liked to have made it more modular but almost all of these changes are interdependent, save for the documentation updates. Note: Right now, the "3DLUT takes precedence over SRGB" logic is just coded into gl_lcms.c's compile_shaders function. Ideally, this should be done earlier, when parsing the options (by overriding the actual opts.srgb flag) and output a warning to the user. Note: I'm not sure how well this works together with real-world subtitles that may need to be color corrected as well. I'm not sure whether :approx-gamma needs to apply to subtitles as well. I'll need to test this on proper files later. Note: As of now, linear light scaling is still intrinsically tied to either :srgb or :icc-profile. It would be thinkable to have this as an extra option, :linear-scaling or similar, that could be used with or without the two color management options.
816 lines
34 KiB
ReStructuredText
816 lines
34 KiB
ReStructuredText
VIDEO OUTPUT DRIVERS
|
|
====================
|
|
|
|
Video output drivers are interfaces to different video output facilities. The
|
|
syntax is:
|
|
|
|
``--vo=<driver1[:suboption1[=value]:...],driver2,...[,]>``
|
|
Specify a priority list of video output drivers to be used.
|
|
|
|
If the list has a trailing ',', mpv will fall back on drivers not contained
|
|
in the list. Suboptions are optional and can mostly be omitted.
|
|
|
|
You can also set defaults for each driver. The defaults are applied before the
|
|
normal driver parameters.
|
|
|
|
``--vo-defaults=<driver1[:parameter1:parameter2:...],driver2,...>``
|
|
Set defaults for each driver.
|
|
|
|
.. note::
|
|
|
|
See ``--vo=help`` for a list of compiled-in video output drivers.
|
|
|
|
.. admonition:: Example
|
|
|
|
``--vo=opengl,xv,``
|
|
Try the ``opengl`` driver, then the ``xv`` driver, then others.
|
|
|
|
Available video output drivers are:
|
|
|
|
``xv`` (X11 only)
|
|
Uses the XVideo extension to enable hardware-accelerated display. This is
|
|
the most compatible VO on X, but may be low-quality, and has issues with
|
|
OSD and subtitle display.
|
|
|
|
``adaptor=<number>``
|
|
Select a specific XVideo adaptor (check xvinfo results).
|
|
``port=<number>``
|
|
Select a specific XVideo port.
|
|
``ck=<cur|use|set>``
|
|
Select the source from which the colorkey is taken (default: cur).
|
|
|
|
cur
|
|
The default takes the colorkey currently set in Xv.
|
|
use
|
|
Use but do not set the colorkey from mpv (use the ``--colorkey``
|
|
option to change it).
|
|
set
|
|
Same as use but also sets the supplied colorkey.
|
|
|
|
``ck-method=<man|bg|auto>``
|
|
Sets the colorkey drawing method (default: man).
|
|
|
|
man
|
|
Draw the colorkey manually (reduces flicker in some cases).
|
|
bg
|
|
Set the colorkey as window background.
|
|
auto
|
|
Let Xv draw the colorkey.
|
|
|
|
``colorkey=<number>``
|
|
Changes the colorkey to an RGB value of your choice. ``0x000000`` is
|
|
black and ``0xffffff`` is white.
|
|
|
|
``no-colorkey``
|
|
Disables colorkeying.
|
|
|
|
``x11`` (X11 only)
|
|
Shared memory video output driver without hardware acceleration that works
|
|
whenever X11 is present.
|
|
|
|
.. note:: This is a fallback only, and should not be normally used.
|
|
|
|
``vdpau`` (X11 only)
|
|
Uses the VDPAU interface to display and optionally also decode video.
|
|
Hardware decoding is used with ``--hwdec=vdpau``.
|
|
|
|
``sharpen=<-1-1>``
|
|
For positive values, apply a sharpening algorithm to the video, for
|
|
negative values a blurring algorithm (default: 0).
|
|
``denoise=<0-1>``
|
|
Apply a noise reduction algorithm to the video (default: 0; no noise
|
|
reduction).
|
|
``deint=<-4-4>``
|
|
Select deinterlacing mode (default: -3). Positive values choose mode
|
|
and enable deinterlacing. Corresponding negative values select the
|
|
same deinterlacing mode, but do not enable deinterlacing on startup
|
|
(useful in configuration files to specify which mode will be enabled by
|
|
the "D" key). All modes respect ``--field-dominance``.
|
|
|
|
0
|
|
Same as -3.
|
|
1
|
|
Show only first field.
|
|
2
|
|
Bob deinterlacing.
|
|
3
|
|
Motion-adaptive temporal deinterlacing. May lead to A/V desync
|
|
with slow video hardware and/or high resolution.
|
|
4
|
|
Motion-adaptive temporal deinterlacing with edge-guided spatial
|
|
interpolation. Needs fast video hardware.
|
|
``chroma-deint``
|
|
Makes temporal deinterlacers operate both on luma and chroma (default).
|
|
Use no-chroma-deint to solely use luma and speed up advanced
|
|
deinterlacing. Useful with slow video memory.
|
|
``pullup``
|
|
Try to apply inverse telecine, needs motion adaptive temporal
|
|
deinterlacing.
|
|
``hqscaling=<0-9>``
|
|
0
|
|
Use default VDPAU scaling (default).
|
|
1-9
|
|
Apply high quality VDPAU scaling (needs capable hardware).
|
|
``fps=<number>``
|
|
Override autodetected display refresh rate value (the value is needed
|
|
for framedrop to allow video playback rates higher than display
|
|
refresh rate, and for vsync-aware frame timing adjustments). Default 0
|
|
means use autodetected value. A positive value is interpreted as a
|
|
refresh rate in Hz and overrides the autodetected value. A negative
|
|
value disables all timing adjustment and framedrop logic.
|
|
``composite-detect``
|
|
NVIDIA's current VDPAU implementation behaves somewhat differently
|
|
under a compositing window manager and does not give accurate frame
|
|
timing information. With this option enabled, the player tries to
|
|
detect whether a compositing window manager is active. If one is
|
|
detected, the player disables timing adjustments as if the user had
|
|
specified ``fps=-1`` (as they would be based on incorrect input). This
|
|
means timing is somewhat less accurate than without compositing, but
|
|
with the composited mode behavior of the NVIDIA driver, there is no
|
|
hard playback speed limit even without the disabled logic. Enabled by
|
|
default, use ``no-composite-detect`` to disable.
|
|
``queuetime_windowed=<number>`` and ``queuetime_fs=<number>``
|
|
Use VDPAU's presentation queue functionality to queue future video
|
|
frame changes at most this many milliseconds in advance (default: 50).
|
|
See below for additional information.
|
|
``output_surfaces=<2-15>``
|
|
Allocate this many output surfaces to display video frames (default:
|
|
3). See below for additional information.
|
|
``colorkey=<#RRGGBB|#AARRGGBB>``
|
|
Set the VDPAU presentation queue background color, which in practice
|
|
is the colorkey used if VDPAU operates in overlay mode (default:
|
|
``#020507``, some shade of black). If the alpha component of this value
|
|
is 0, the default VDPAU colorkey will be used instead (which is usually
|
|
green).
|
|
``force-yuv``
|
|
Never accept RGBA input. This means mpv will insert a filter to convert
|
|
to a YUV format before the VO. Sometimes useful to force availability
|
|
of certain YUV-only features, like video equalizer or deinterlacing.
|
|
|
|
Using the VDPAU frame queueing functionality controlled by the queuetime
|
|
options makes mpv's frame flip timing less sensitive to system CPU load and
|
|
allows mpv to start decoding the next frame(s) slightly earlier, which can
|
|
reduce jitter caused by individual slow-to-decode frames. However, the
|
|
NVIDIA graphics drivers can make other window behavior such as window moves
|
|
choppy if VDPAU is using the blit queue (mainly happens if you have the
|
|
composite extension enabled) and this feature is active. If this happens on
|
|
your system and it bothers you then you can set the queuetime value to 0 to
|
|
disable this feature. The settings to use in windowed and fullscreen mode
|
|
are separate because there should be no reason to disable this for
|
|
fullscreen mode (as the driver issue should not affect the video itself).
|
|
|
|
You can queue more frames ahead by increasing the queuetime values and the
|
|
``output_surfaces`` count (to ensure enough surfaces to buffer video for a
|
|
certain time ahead you need at least as many surfaces as the video has
|
|
frames during that time, plus two). This could help make video smoother in
|
|
some cases. The main downsides are increased video RAM requirements for
|
|
the surfaces and laggier display response to user commands (display
|
|
changes only become visible some time after they're queued). The graphics
|
|
driver implementation may also have limits on the length of maximum
|
|
queuing time or number of queued surfaces that work well or at all.
|
|
|
|
``direct3d_shaders`` (Windows only)
|
|
Video output driver that uses the Direct3D interface.
|
|
|
|
``prefer-stretchrect``
|
|
Use ``IDirect3DDevice9::StretchRect`` over other methods if possible.
|
|
|
|
``disable-stretchrect``
|
|
Never render the video using ``IDirect3DDevice9::StretchRect``.
|
|
|
|
``disable-textures``
|
|
Never render the video using D3D texture rendering. Rendering with
|
|
textures + shader will still be allowed. Add ``disable-shaders`` to
|
|
completely disable video rendering with textures.
|
|
|
|
``disable-shaders``
|
|
Never use shaders when rendering video.
|
|
|
|
``only-8bit``
|
|
Never render YUV video with more than 8 bits per component.
|
|
Using this flag will force software conversion to 8-bit.
|
|
|
|
``disable-texture-align``
|
|
Normally texture sizes are always aligned to 16. With this option
|
|
enabled, the video texture will always have exactly the same size as
|
|
the video itself.
|
|
|
|
|
|
Debug options. These might be incorrect, might be removed in the future,
|
|
might crash, might cause slow downs, etc. Contact the developers if you
|
|
actually need any of these for performance or proper operation.
|
|
|
|
``force-power-of-2``
|
|
Always force textures to power of 2, even if the device reports
|
|
non-power-of-2 texture sizes as supported.
|
|
|
|
``texture-memory=N``
|
|
Only affects operation with shaders/texturing enabled, and (E)OSD.
|
|
Values for N:
|
|
|
|
0
|
|
default, will often use an additional shadow texture + copy
|
|
1
|
|
use ``D3DPOOL_MANAGED``
|
|
2
|
|
use ``D3DPOOL_DEFAULT``
|
|
3
|
|
use ``D3DPOOL_SYSTEMMEM``, but without shadow texture
|
|
|
|
``swap-discard``
|
|
Use ``D3DSWAPEFFECT_DISCARD``, which might be faster.
|
|
Might be slower too, as it must(?) clear every frame.
|
|
|
|
``exact-backbuffer``
|
|
Always resize the backbuffer to window size.
|
|
|
|
``direct3d`` (Windows only)
|
|
Same as ``direct3d_shaders``, but with the options ``disable-textures``
|
|
and ``disable-shaders`` forced.
|
|
|
|
``corevideo`` (Mac OS X 10.6 and later)
|
|
Mac OS X CoreVideo video output driver. Uses the CoreVideo APIs to fill
|
|
PixelBuffers and generate OpenGL textures from them (useful as a fallback
|
|
for ``opengl``).
|
|
|
|
``opengl``
|
|
OpenGL video output driver. It supports extended scaling methods, dithering
|
|
and color management.
|
|
|
|
By default, it tries to use fast and fail-safe settings. Use the alias
|
|
``opengl-hq`` to use this driver with defaults set to high quality
|
|
rendering.
|
|
|
|
Requires at least OpenGL 2.1 and the ``GL_ARB_texture_rg`` extension. For
|
|
older drivers, ``opengl-old`` may work.
|
|
|
|
Some features are available with OpenGL 3 capable graphics drivers only
|
|
(or if the necessary extensions are available).
|
|
|
|
Hardware decoding over OpenGL-interop is supported to some degree. Note
|
|
that in this mode, some corner case might not be gracefully handled, and
|
|
colorspace conversion and chroma upsampling is generally in the hand of
|
|
the hardware decoder APIs.
|
|
|
|
``lscale=<filter>``
|
|
|
|
``bilinear``
|
|
Bilinear hardware texture filtering (fastest, mid-quality).
|
|
This is the default.
|
|
|
|
``lanczos2``
|
|
Lanczos scaling with radius=2. Provides good quality and speed.
|
|
This is the default when using ``opengl-hq``.
|
|
|
|
``lanczos3``
|
|
Lanczos with radius=3.
|
|
|
|
``bicubic_fast``
|
|
Bicubic filter. Has a blurring effect on the image, even if no
|
|
scaling is done.
|
|
|
|
``sharpen3``
|
|
Unsharp masking (sharpening) with radius=3 and a default strength
|
|
of 0.5 (see ``lparam1``).
|
|
|
|
``sharpen5``
|
|
Unsharp masking (sharpening) with radius=5 and a default strength
|
|
of 0.5 (see ``lparam1``).
|
|
|
|
``mitchell``
|
|
Mitchell-Netravali. The ``b`` and ``c`` parameters can be set with
|
|
``lparam1`` and ``lparam2``. Both are set to 1/3 by default.
|
|
|
|
|
|
There are some more filters. For a complete list, pass ``help`` as
|
|
value, e.g.::
|
|
|
|
mpv --vo=opengl:lscale=help
|
|
|
|
``lparam1=<value>``
|
|
Set filter parameters. Ignored if the filter is not tunable. These are
|
|
unset by default, and use the filter specific default if applicable.
|
|
|
|
``lparam2=<value>``
|
|
See ``lparam1``.
|
|
|
|
``scaler-resizes-only``
|
|
Disable the scaler if the video image is not resized. In that case,
|
|
``bilinear`` is used instead whatever is set with ``lscale``. Bilinear
|
|
will reproduce the source image perfectly if no scaling is performed.
|
|
Note that this option never affects ``cscale``, although the different
|
|
processing chain might do chroma scaling differently if ``lscale`` is
|
|
disabled.
|
|
|
|
``stereo=<value>``
|
|
Select a method for stereo display. You may have to use ``--aspect`` to
|
|
fix the aspect value. Experimental, do not expect too much from it.
|
|
|
|
no
|
|
Normal 2D display
|
|
red-cyan
|
|
Convert side by side input to full-color red-cyan stereo.
|
|
green-magenta
|
|
Convert side by side input to full-color green-magenta stereo.
|
|
quadbuffer
|
|
Convert side by side input to quadbuffered stereo. Only supported
|
|
by very few OpenGL cards.
|
|
|
|
``srgb``
|
|
Convert and color correct the output to sRGB before displaying it on
|
|
the screen. This option enables linear light scaling. It also forces
|
|
the options ``indirect`` and ``gamma``.
|
|
|
|
This option is equivalent to using ``icc-profile`` with an sRGB ICC
|
|
profile, but it is implemented without a 3DLUT and does not require
|
|
LittleCMS 2. If both ``srgb`` and ``icc-profile`` are present, the
|
|
latter takes precedence, as they are somewhat redundant.
|
|
|
|
``pbo``
|
|
Enable use of PBOs. This is slightly faster, but can sometimes lead to
|
|
sporadic and temporary image corruption (in theory, because reupload
|
|
is not retried when it fails), and perhaps actually triggers slower
|
|
paths with drivers that don't support PBOs properly.
|
|
|
|
``dither-depth=<N|no|auto>``
|
|
Set dither target depth to N. Default: no.
|
|
|
|
no
|
|
Disable any dithering done by mpv.
|
|
auto
|
|
Automatic selection. If output bit depth cannot be detected,
|
|
8 bits per component are assumed.
|
|
8
|
|
Dither to 8 bit output.
|
|
|
|
Note that the depth of the connected video display device can not be
|
|
detected. Often, LCD panels will do dithering on their own, which
|
|
conflicts with ``opengl``'s dithering and leads to ugly output.
|
|
|
|
``dither-size-fruit=<2-8>``
|
|
Set the size of the dither matrix (default: 6). The actual size of
|
|
the matrix is ``(2^N) x (2^N)`` for an option value of ``N``, so a
|
|
value of 6 gives a size of 64x64. The matrix is generated at startup
|
|
time, and a large matrix can take rather long to compute (seconds).
|
|
|
|
Used in ``dither=fruit`` mode only.
|
|
|
|
``dither=<fruit|ordered|no>``
|
|
Select dithering algorithm (default: fruit).
|
|
|
|
``temporal-dither``
|
|
Enable temporal dithering. (Only active if dithering is enabled in
|
|
general.) This changes between 8 different dithering pattern on each
|
|
frame by changing the orientation of the tiled dithering matrix.
|
|
Unfortunately, this can lead to flicker on LCD displays, since these
|
|
have a high reaction time.
|
|
|
|
``debug``
|
|
Check for OpenGL errors, i.e. call ``glGetError()``. Also request a
|
|
debug OpenGL context (which does nothing with current graphics drivers
|
|
as of this writing).
|
|
|
|
``swapinterval=<n>``
|
|
Interval in displayed frames between two buffer swaps.
|
|
1 is equivalent to enable VSYNC, 0 to disable VSYNC.
|
|
|
|
``no-scale-sep``
|
|
When using a separable scale filter for luma, usually two filter
|
|
passes are done. This is often faster. However, it forces
|
|
conversion to RGB in an extra pass, so it can actually be slower
|
|
if used with fast filters on small screen resolutions. Using
|
|
this options will make rendering a single operation.
|
|
Note that chroma scalers are always done as 1-pass filters.
|
|
|
|
``cscale=<n>``
|
|
As ``lscale``, but for chroma (2x slower with little visible effect).
|
|
Note that with some scaling filters, upscaling is always done in
|
|
RGB. If chroma is not subsampled, this option is ignored, and the
|
|
luma scaler is used instead. Setting this option is often useless.
|
|
|
|
``fancy-downscaling``
|
|
When using convolution based filters, extend the filter size
|
|
when downscaling. Trades quality for reduced downscaling performance.
|
|
|
|
``no-npot``
|
|
Force use of power-of-2 texture sizes. For debugging only.
|
|
Borders will be distorted due to filtering.
|
|
|
|
``glfinish``
|
|
Call ``glFinish()`` before swapping buffers
|
|
|
|
``sw``
|
|
Continue even if a software renderer is detected.
|
|
|
|
``backend=<sys>``
|
|
The value ``auto`` (the default) selects the windowing backend. You
|
|
can also pass ``help`` to get a complete list of compiled in backends
|
|
(sorted by autoprobe order).
|
|
|
|
auto
|
|
auto-select (default)
|
|
cocoa
|
|
Cocoa/OSX
|
|
win
|
|
Win32/WGL
|
|
x11
|
|
X11/GLX
|
|
wayland
|
|
Wayland/EGL
|
|
|
|
``indirect``
|
|
Do YUV conversion and scaling as separate passes. This will first render
|
|
the video into a video-sized RGB texture, and draw the result on screen.
|
|
The luma scaler is used to scale the RGB image when rendering to screen.
|
|
The chroma scaler is used only on YUV conversion, and only if the video
|
|
is chroma-subsampled (usually the case).
|
|
This mechanism is disabled on RGB input.
|
|
Specifying this option directly is generally useful for debugging only.
|
|
|
|
``fbo-format=<fmt>``
|
|
Selects the internal format of textures used for FBOs. The format can
|
|
influence performance and quality of the video output. (FBOs are not
|
|
always used, and typically only when using extended scalers.)
|
|
``fmt`` can be one of: rgb, rgba, rgb8, rgb10, rgb10_a2, rgb16, rgb16f,
|
|
rgb32f, rgba12, rgba16, rgba16f, rgba32f.
|
|
Default: rgb.
|
|
|
|
``gamma=<0.0..10.0>``
|
|
Set a gamma value. If gamma is adjusted in other ways (like with
|
|
the ``--gamma`` option or keybindings and the ``gamma`` property), the
|
|
value is multiplied with the other gamma value.
|
|
|
|
Setting this value to 1.0 can be used to always enable gamma control.
|
|
(Disables delayed enabling.)
|
|
|
|
``icc-profile=<file>``
|
|
Load an ICC profile and use it to transform linear RGB to screen output.
|
|
Needs LittleCMS2 support compiled in. This option overrides the ``srgb``
|
|
property, as using both is somewhat redundant. It also enables linear
|
|
light scaling.
|
|
|
|
``icc-cache=<file>``
|
|
Store and load the 3D LUT created from the ICC profile in this file.
|
|
This can be used to speed up loading, since LittleCMS2 can take a while
|
|
to create the 3D LUT. Note that this file contains an uncompressed LUT.
|
|
Its size depends on the ``3dlut-size``, and can be very big.
|
|
|
|
``icc-intent=<value>``
|
|
0
|
|
perceptual
|
|
1
|
|
relative colorimetric (default)
|
|
2
|
|
saturation
|
|
3
|
|
absolute colorimetric
|
|
|
|
``approx-gamma``
|
|
Approximate the actual BT.709 gamma function as a pure power curve of
|
|
1.95. A number of video editing programs and studios apparently use this
|
|
for mastering instead of the true curve. Most notably, anything in the
|
|
Apple ecosystem uses this approximation - including all programs
|
|
compatible with it. It's a sound idea to try enabling this flag first
|
|
when watching movies and shows to see if things look better that way.
|
|
|
|
This only affects the output when using either ``icc-profile`` or``srgb``.
|
|
|
|
``3dlut-size=<r>x<g>x<b>``
|
|
Size of the 3D LUT generated from the ICC profile in each dimension.
|
|
Default is 128x256x64.
|
|
Sizes must be a power of two, and 256 at most.
|
|
|
|
``alpha=<blend|yes|no>``
|
|
Decides what to do if the input has an alpha component (default: blend).
|
|
|
|
blend
|
|
Blend the frame against a black background.
|
|
yes
|
|
Try to create a framebuffer with alpha component. This only makes sense
|
|
if the video contains alpha information (which is extremely rare). May
|
|
not be supported on all platforms. If alpha framebuffers are
|
|
unavailable, it silently falls back on a normal framebuffer. Note
|
|
that when using FBO indirections (such as with ``opengl-hq``), an FBO
|
|
format with alpha must be specified with the ``fbo-format`` option.
|
|
no
|
|
Ignore alpha component.
|
|
|
|
``chroma-location=<auto|center|left>``
|
|
Set the YUV chroma sample location. auto means use the bitstream
|
|
flags (default: auto).
|
|
|
|
``rectangle-textures``
|
|
Force use of rectangle textures (default: no). Normally this shouldn't
|
|
have any advantages over normal textures. Note that hardware decoding
|
|
overrides this flag.
|
|
|
|
``opengl-hq``
|
|
Same as ``opengl``, but with default settings for high quality rendering.
|
|
|
|
This is equivalent to::
|
|
|
|
--vo=opengl:lscale=lanczos2:dither-depth=auto:fbo-format=rgb16
|
|
|
|
Note that some cheaper LCDs do dithering that gravely interferes with
|
|
``opengl``'s dithering. Disabling dithering with ``dither-depth=no`` helps.
|
|
|
|
Unlike ``opengl``, ``opengl-hq`` makes use of FBOs by default. Sometimes you
|
|
can achieve better quality or performance by changing the ``fbo-format``
|
|
suboption to ``rgb16f``, ``rgb32f`` or ``rgb``. Known problems include
|
|
Mesa/Intel not accepting ``rgb16``, Mesa sometimes not being compiled with
|
|
float texture support, and some OSX setups being very slow with ``rgb16``
|
|
but fast with ``rgb32f``.
|
|
|
|
``opengl-old``
|
|
OpenGL video output driver, old version. Video size must be smaller
|
|
than the maximum texture size of your OpenGL implementation. Intended to
|
|
work even with the most basic OpenGL implementations, but also makes use
|
|
of newer extensions which allow support for more color spaces.
|
|
|
|
The code performs very few checks, so if a feature does not work, this
|
|
might be because it is not supported by your card and/or OpenGL
|
|
implementation, even if you do not get any error message. Use ``glxinfo``
|
|
or a similar tool to display the supported OpenGL extensions.
|
|
|
|
``(no-)ati-hack``
|
|
ATI drivers may give a corrupted image when PBOs are used (when using
|
|
``force-pbo``). This option fixes this, at the expense of using a bit
|
|
more memory.
|
|
``(no-)force-pbo``
|
|
Always uses PBOs to transfer textures even if this involves an extra
|
|
copy. Currently this gives a little extra speed with NVIDIA drivers
|
|
and a lot more speed with ATI drivers. May need the ``ati-hack``
|
|
suboption to work correctly.
|
|
``(no-)scaled-osd``
|
|
Scales the OSD and subtitles instead of rendering them at display size
|
|
(default: disabled).
|
|
``rectangle=<0,1,2>``
|
|
Select usage of rectangular textures, which saves video RAM, but often
|
|
is slower (default: 0).
|
|
|
|
0
|
|
Use power-of-two textures (default).
|
|
1
|
|
Use the ``GL_ARB_texture_rectangle`` extension.
|
|
2
|
|
Use the ``GL_ARB_texture_non_power_of_two`` extension. In some
|
|
cases only supported in software and thus very slow.
|
|
|
|
``swapinterval=<n>``
|
|
Minimum interval between two buffer swaps, counted in displayed frames
|
|
(default: 1). 1 is equivalent to enabling VSYNC, 0 to disabling VSYNC.
|
|
Values below 0 will leave it at the system default. This limits the
|
|
framerate to (horizontal refresh rate / n). Requires
|
|
``GLX_SGI_swap_control`` support to work. With some (most/all?)
|
|
implementations this only works in fullscreen mode.
|
|
``ycbcr``
|
|
Use the ``GL_MESA_ycbcr_texture`` extension to convert YUV to RGB. In
|
|
most cases this is probably slower than doing software conversion to
|
|
RGB.
|
|
``yuv=<n>``
|
|
Select the type of YUV to RGB conversion. The default is
|
|
auto-detection deciding between values 0 and 2.
|
|
|
|
0
|
|
Use software conversion. Compatible with all OpenGL versions.
|
|
Provides brightness, contrast and saturation control.
|
|
1
|
|
Same as 2. This used to use NVIDIA-specific extensions, which
|
|
did not provide any advantages over using fragment programs, except
|
|
possibly on very ancient graphics cards. It produced a gray-ish
|
|
output, which is why it has been removed.
|
|
2
|
|
Use a fragment program. Needs the ``GL_ARB_fragment_program``
|
|
extension and at least three texture units. Provides brightness,
|
|
contrast, saturation and hue control.
|
|
3
|
|
Use a fragment program using the ``POW`` instruction. Needs the
|
|
``GL_ARB_fragment_program`` extension and at least three texture
|
|
units. Provides brightness, contrast, saturation, hue and gamma
|
|
control. Gamma can also be set independently for red, green and
|
|
blue. Method 4 is usually faster.
|
|
4
|
|
Use a fragment program with additional lookup. Needs the
|
|
``GL_ARB_fragment_program`` extension and at least four texture
|
|
units. Provides brightness, contrast, saturation, hue and gamma
|
|
control. Gamma can also be set independently for red, green and
|
|
blue.
|
|
5
|
|
Use ATI-specific method (for older cards). This uses an
|
|
ATI-specific extension (``GL_ATI_fragment_shader`` - not
|
|
``GL_ARB_fragment_shader``!). At least three texture units are
|
|
needed. Provides saturation and hue control. This method is fast
|
|
but inexact.
|
|
6
|
|
Use a 3D texture to do conversion via lookup. Needs the
|
|
``GL_ARB_fragment_program extension`` and at least four texture
|
|
units. Extremely slow (software emulation) on some (all?) ATI
|
|
cards since it uses a texture with border pixels. Provides
|
|
brightness, contrast, saturation, hue and gamma control. Gamma can
|
|
also be set independently for red, green and blue. Speed depends
|
|
more on GPU memory bandwidth than other methods.
|
|
|
|
``lscale=<n>``
|
|
Select the scaling function to use for luminance scaling. Only valid
|
|
for yuv modes 2, 3, 4 and 6.
|
|
|
|
0
|
|
Use simple linear filtering (default).
|
|
1
|
|
Use bicubic B-spline filtering (better quality). Needs one
|
|
additional texture unit. Older cards will not be able to handle
|
|
this for chroma at least in fullscreen mode.
|
|
2
|
|
Use cubic filtering in horizontal, linear filtering in vertical
|
|
direction. Works on a few more cards than method 1.
|
|
3
|
|
Same as 1 but does not use a lookup texture. Might be faster on
|
|
some cards.
|
|
4
|
|
Use experimental unsharp masking with 3x3 support and a default
|
|
strength of 0.5 (see ``filter-strength``).
|
|
5
|
|
Use experimental unsharp masking with 5x5 support and a default
|
|
strength of 0.5 (see ``filter-strength``).
|
|
|
|
``cscale=<n>``
|
|
Select the scaling function to use for chrominance scaling. For
|
|
details see ``lscale``.
|
|
``filter-strength=<value>``
|
|
Set the effect strength for the ``lscale``/``cscale`` filters that
|
|
support it.
|
|
``stereo=<value>``
|
|
Select a method for stereo display. You may have to use ``--aspect`` to
|
|
fix the aspect value. Experimental, do not expect too much from it.
|
|
|
|
0
|
|
Normal 2D display
|
|
1
|
|
Convert side by side input to full-color red-cyan stereo.
|
|
2
|
|
Convert side by side input to full-color green-magenta stereo.
|
|
3
|
|
Convert side by side input to quadbuffered stereo. Only supported
|
|
by very few OpenGL cards.
|
|
|
|
The following options are only useful if writing your own fragment programs.
|
|
|
|
``customprog=<filename>``
|
|
Load a custom fragment program from ``<filename>``.
|
|
``customtex=<filename>``
|
|
Load a custom "gamma ramp" texture from ``<filename>``. This can be used
|
|
in combination with ``yuv=4`` or with the ``customprog`` option.
|
|
``(no-)customtlin``
|
|
If enabled (default) use ``GL_LINEAR`` interpolation, otherwise use
|
|
``GL_NEAREST`` for customtex texture.
|
|
``(no-)customtrect``
|
|
If enabled, use ``texture_rectangle`` for the ``customtex`` texture.
|
|
Default is disabled.
|
|
``(no-)mipmapgen``
|
|
If enabled, mipmaps for the video are automatically generated. This
|
|
should be useful together with the ``customprog`` and the ``TXB``
|
|
instruction to implement blur filters with a large radius. For most
|
|
OpenGL implementations, this is very slow for any non-RGB formats.
|
|
Default is disabled.
|
|
|
|
Normally there is no reason to use the following options; they mostly
|
|
exist for testing purposes.
|
|
|
|
``(no-)glfinish``
|
|
Call ``glFinish()`` before swapping buffers. Slower but in some cases
|
|
more correct output (default: disabled).
|
|
``(no-)manyfmts``
|
|
Enables support for more (RGB and BGR) color formats (default: enabled).
|
|
Needs OpenGL version >= 1.2.
|
|
``slice-height=<0-...>``
|
|
Number of lines copied to texture in one piece (default: 0). 0 for
|
|
whole image.
|
|
``sw``
|
|
Continue even if a software renderer is detected.
|
|
|
|
``backend=<sys>``
|
|
auto
|
|
auto-select (default)
|
|
cocoa
|
|
Cocoa/OSX
|
|
win
|
|
Win32/WGL
|
|
x11
|
|
X11/GLX
|
|
wayland
|
|
Wayland/EGL
|
|
|
|
``sdl``
|
|
SDL 2.0+ Render video output driver, depending on system with or without
|
|
hardware acceleration. Should work on all platforms supported by SDL 2.0.
|
|
For tuning, refer to your copy of the file ``SDL_hints.h``.
|
|
|
|
``sw``
|
|
Continue even if a software renderer is detected.
|
|
|
|
``switch-mode``
|
|
Instruct SDL to switch the monitor video mode when going fullscreen.
|
|
|
|
``vaapi``
|
|
Intel VA API video output driver with support for hardware decoding. Note
|
|
that there is absolutely no reason to use this, other than wanting to use
|
|
hardware decoding to save power on laptops, or possibly preventing video
|
|
tearing with some setups.
|
|
|
|
``scaling=<algorithm>``
|
|
default
|
|
Driver default (mpv default as well).
|
|
fast
|
|
Fast, but low quality.
|
|
hq
|
|
Unspecified driver dependent high-quality scaling, slow.
|
|
nla
|
|
``non-linear anamorphic scaling``
|
|
|
|
``deint-mode=<mode>``
|
|
Select deinterlacing algorithm. Note that by default deinterlacing is
|
|
initially always off, and needs to be enabled with the ``D`` key
|
|
(default key binding for ``cycle deinterlace``).
|
|
|
|
This option doesn't apply if libva supports video post processing (vpp).
|
|
In this case, the default for ``deint-mode`` is ``no``, and enabling
|
|
deinterlacing via user interaction using the methods mentioned above
|
|
actually inserts the ``vavpp`` video filter. If vpp is not actually
|
|
supported with the libva backend in use, you can use this option to
|
|
forcibly enable VO based deinterlacing.
|
|
|
|
no
|
|
Don't allow deinterlacing (default for newer libva).
|
|
first-field
|
|
Show only first field (going by ``--field-dominance``).
|
|
bob
|
|
bob deinterlacing (default for older libva).
|
|
|
|
``scaled-osd=<yes|no>``
|
|
If enabled, then the OSD is rendered at video resolution and scaled to
|
|
display resolution. By default, this is disabled, and the OSD is
|
|
rendered at display resolution if the driver supports it.
|
|
|
|
``null``
|
|
Produces no video output. Useful for benchmarking.
|
|
|
|
``caca``
|
|
Color ASCII art video output driver that works on a text console.
|
|
|
|
``image``
|
|
Output each frame into an image file in the current directory. Each file
|
|
takes the frame number padded with leading zeros as name.
|
|
|
|
``format=<format>``
|
|
Select the image file format.
|
|
|
|
jpg
|
|
JPEG files, extension .jpg. (Default.)
|
|
jpeg
|
|
JPEG files, extension .jpeg.
|
|
png
|
|
PNG files.
|
|
ppm
|
|
Portable bitmap format.
|
|
pgm
|
|
Portable graymap format.
|
|
pgmyuv
|
|
Portable graymap format, using the YV12 pixel format.
|
|
tga
|
|
Truevision TGA.
|
|
|
|
``png-compression=<0-9>``
|
|
PNG compression factor (speed vs. file size tradeoff) (default: 7)
|
|
``png-filter=<0-5>``
|
|
Filter applied prior to PNG compression (0 = none; 1 = sub; 2 = up;
|
|
3 = average; 4 = Paeth; 5 = mixed) (default: 5)
|
|
``jpeg-quality=<0-100>``
|
|
JPEG quality factor (default: 90)
|
|
``(no-)jpeg-progressive``
|
|
Specify standard or progressive JPEG (default: no).
|
|
``(no-)jpeg-baseline``
|
|
Specify use of JPEG baseline or not (default: yes).
|
|
``jpeg-optimize=<0-100>``
|
|
JPEG optimization factor (default: 100)
|
|
``jpeg-smooth=<0-100>``
|
|
smooth factor (default: 0)
|
|
``jpeg-dpi=<1->``
|
|
JPEG DPI (default: 72)
|
|
``outdir=<dirname>``
|
|
Specify the directory to save the image files to (default: ``./``).
|
|
|
|
``wayland`` (Wayland only)
|
|
Wayland shared memory video output as fallback for ``opengl``.
|
|
|
|
``alpha``
|
|
Use a buffer format that supports videos and images with alpha
|
|
information
|
|
``rgb565``
|
|
Use RGB565 as buffer format. This format is implemented on most
|
|
platforms, especially on embedded where it is far more efficient then
|
|
RGB8888.
|
|
``triple-buffering``
|
|
Use 3 buffers instead of 2. This can lead to more fluid playback, but
|
|
uses more memory.
|
|
|