mpv/DOCS/DXR3

78 lines
2.8 KiB
Plaintext

How to use a Sigma Designs Hollywood Plus and/or a Creative DXR3 by David Holm
==============================================================================
Thanks goes out to Daniel Bell for the donation of a brand new 20GB IBM
harddisk.
1. Requirements
* First of all you will need the DXR3/H+ drivers properly installed.
Version 0.12.0 or later. You can find it at
http://dxr3.sourceforge.net/
(you only need to run "make install devices" in em8300-x.y.z/modules
not in the root dir)
* Run <mplayerdir>/configure and make sure that DXR3/H+ support = yes
if you want to play files other than mpeg I highly recommend you install
libavcodec as well (Read DOCS/codecs.html for more info).
From here on compilation (of at least my code ;) should go without any
problems.
2. Usage
-vo dxr3:<noprebuf>:<codec>:<device>Where noprebuf specifies to turn off
prebuffering. This is done automatically
on athlons. If playback is out of sync
try disabling prebuffering. If noprebuf
is left out prebuffering is enabled
(except on athlons).
<codec> = fame/avcodec, avcodec produces
better quality output, but fame is
faster for those of you with slow
machines. The default is to use
libavcodec. Note that you need
libavcodec properly installed (read
DOCS/codecs.html)
<device> = device number to use in case
you have more than one em8300 card
Any of these options may be left out,
but they must be specified in this order
i.e. dxr3:fame works, dxr3:1 works but
dxr3:1:avcodec will not.
These new features were added by XorA,
he usually hangs out in #dxr3 on
irc.openprojects.net, let him know
you like it...
-ao oss:/dev/em8300_ma-X For audio output, where X is the device
number (0 if one card)
-ac hwac3 For digital audio output instead of
analog
-vc mpegpes Force hardware acceleration, only works
with mpeg1/2
-aop list=resample:fout=xxxxx If samplerate is below 44100Hz, select
either 44100 or 48000 depending on
which which one matches closest. I.e.
if the movie uses 22050 use 44100 as
44100 / 2 = 22050, if it's 24000 use
48000 as 48000 / 2 = 24000 and so on.
This does not work with digital audio
output (-ac hwac3)
MPEG-1, MPEG-2, VCD and DVD Notes
MPEG 1/2 content should now automatically be detected by mplayer and it will
use the hardware acceleration of the DXR3 to play it. If not, you can force
it to hardware acceleration with -vc mpegpes. Also, if you plan to use any
postprocessing filters you must use -vc mpeg12.
3. Contacting me
You can contact me either by e-mailing me, <dholm@iname.com> or by using
icq: 798427
Feedback, bugreports and general suggestions are appreciated (preferably
by e-mail).