mirror of https://github.com/mpv-player/mpv
2986 lines
124 KiB
ReStructuredText
2986 lines
124 KiB
ReStructuredText
COMMAND INTERFACE
|
|
=================
|
|
|
|
The mpv core can be controlled with commands and properties. A number of ways
|
|
to interact with the player use them: key bindings (``input.conf``), OSD
|
|
(showing information with properties), JSON IPC, the client API (``libmpv``),
|
|
and the classic slave mode.
|
|
|
|
input.conf
|
|
----------
|
|
|
|
The input.conf file consists of a list of key bindings, for example::
|
|
|
|
s screenshot # take a screenshot with the s key
|
|
LEFT seek 15 # map the left-arrow key to seeking forward by 15 seconds
|
|
|
|
Each line maps a key to an input command. Keys are specified with their literal
|
|
value (upper case if combined with ``Shift``), or a name for special keys. For
|
|
example, ``a`` maps to the ``a`` key without shift, and ``A`` maps to ``a``
|
|
with shift.
|
|
|
|
The file is located in the mpv configuration directory (normally at
|
|
``~/.config/mpv/input.conf`` depending on platform). The default bindings are
|
|
defined here::
|
|
|
|
https://github.com/mpv-player/mpv/blob/master/etc/input.conf
|
|
|
|
A list of special keys can be obtained with
|
|
|
|
``mpv --input-keylist``
|
|
|
|
In general, keys can be combined with ``Shift``, ``Ctrl`` and ``Alt``::
|
|
|
|
ctrl+q quit
|
|
|
|
**mpv** can be started in input test mode, which displays key bindings and the
|
|
commands they're bound to on the OSD, instead of executing the commands::
|
|
|
|
mpv --input-test --force-window --idle
|
|
|
|
(Only closing the window will make **mpv** exit, pressing normal keys will
|
|
merely display the binding, even if mapped to quit.)
|
|
|
|
Also see `Key names`_.
|
|
|
|
input.conf syntax
|
|
-----------------
|
|
|
|
``[Shift+][Ctrl+][Alt+][Meta+]<key> [{<section>}] <command> ( ; <command> )*``
|
|
|
|
Note that by default, the right Alt key can be used to create special
|
|
characters, and thus does not register as a modifier. The option
|
|
``--no-input-right-alt-gr`` changes this behavior.
|
|
|
|
Newlines always start a new binding. ``#`` starts a comment (outside of quoted
|
|
string arguments). To bind commands to the ``#`` key, ``SHARP`` can be used.
|
|
|
|
``<key>`` is either the literal character the key produces (ASCII or Unicode
|
|
character), or a symbolic name (as printed by ``--input-keylist``).
|
|
|
|
``<section>`` (braced with ``{`` and ``}``) is the input section for this
|
|
command.
|
|
|
|
``<command>`` is the command itself. It consists of the command name and
|
|
multiple (or none) commands, all separated by whitespace. String arguments
|
|
need to be quoted with ``"``. Details see ``Flat command syntax``.
|
|
|
|
You can bind multiple commands to one key. For example:
|
|
|
|
| a show-text "command 1" ; show-text "command 2"
|
|
|
|
It's also possible to bind a command to a sequence of keys:
|
|
|
|
| a-b-c show-text "command run after a, b, c have been pressed"
|
|
|
|
(This is not shown in the general command syntax.)
|
|
|
|
If ``a`` or ``a-b`` or ``b`` are already bound, this will run the first command
|
|
that matches, and the multi-key command will never be called. Intermediate keys
|
|
can be remapped to ``ignore`` in order to avoid this issue. The maximum number
|
|
of (non-modifier) keys for combinations is currently 4.
|
|
|
|
Key names
|
|
---------
|
|
|
|
All mouse and keyboard input is to converted to mpv-specific key names. Key
|
|
names are either special symbolic identifiers representing a physical key, or a
|
|
text key names, which are unicode code points encoded as UTF-8. These are what
|
|
keyboard input would normally produce, for example ``a`` for the A key. As a
|
|
consequence, mpv uses input translated by the current OS keyboard layout, rather
|
|
than physical scan codes.
|
|
|
|
Currently there is the hardcoded assumption that every text key can be
|
|
represented as a single unicode code point (in NFKC form).
|
|
|
|
All key names can be combined with the modifiers ``Shift``, ``Ctrl``, ``Alt``,
|
|
``Meta``. They must be prefixed to the actual key name, where each modifier
|
|
is followed by a ``+`` (for example ``ctrl+q``).
|
|
|
|
Symbolic key names and modifier names are case-insensitive. Unicode key names
|
|
are case-sensitive because input bindings typically respect the shift key.
|
|
|
|
Another type of key names are hexadecimal key names, that serve as fallback
|
|
for special keys that are neither unicode, nor have a special mpv defined name.
|
|
They will break as soon as mpv adds proper names for them, but can enable you
|
|
to use a key at all if that does not happen.
|
|
|
|
All symbolic names are listed by ``--input-keylist``. ``--input-test`` is a
|
|
special mode that prints all input on the OSD.
|
|
|
|
Comments on some symbolic names:
|
|
|
|
``KP*``
|
|
Keypad names. Behavior varies by backend (whether they implement this, and
|
|
on how they treat numlock), but typically, mpv tries to map keys on the
|
|
keypad to separate names, even if they produce the same text as normal keys.
|
|
|
|
``MOUSE_BTN*``, ``MBTN*``
|
|
Various mouse buttons.
|
|
|
|
Depending on backend, the mouse wheel might also be represented as a button.
|
|
In addition, ``MOUSE_BTN3`` to ``MOUSE_BTN6`` are deprecated aliases for
|
|
``WHEEL_UP``, ``WHEEL_DOWN``, ``WHEEL_LEFT``, ``WHEEL_RIGHT``.
|
|
|
|
``MBTN*`` are aliases for ``MOUSE_BTN*``.
|
|
|
|
``WHEEL_*``
|
|
Mouse wheels (typically).
|
|
|
|
``AXIS_*``
|
|
Deprecated aliases for ``WHEEL_*``.
|
|
|
|
``*_DBL``
|
|
Mouse button double clicks.
|
|
|
|
``MOUSE_MOVE``, ``MOUSE_ENTER``, ``MOUSE_LEAVE``
|
|
Emitted by mouse move events. Enter/leave happens when the mouse enters or
|
|
leave the mpv window (or the current mouse region, using the deprecated
|
|
mouse region input section mechanism).
|
|
|
|
``CLOSE_WIN``
|
|
Pseudo key emitted when closing the mpv window using the OS window manager
|
|
(for example, by clicking the close button in the window title bar).
|
|
|
|
``GAMEPAD_*``
|
|
Keys emitted by the SDL gamepad backend.
|
|
|
|
``UNMAPPED``
|
|
Pseudo-key that matches any unmapped key. (You should probably avoid this
|
|
if possible, because it might change behavior or get removed in the future.)
|
|
|
|
``ANY_UNICODE``
|
|
Pseudo-key that matches any key that produces text. (You should probably
|
|
avoid this if possible, because it might change behavior or get removed in
|
|
the future.)
|
|
|
|
Flat command syntax
|
|
-------------------
|
|
|
|
This is the syntax used in input.conf, and referred to "input.conf syntax" in
|
|
a number of other places.
|
|
|
|
``<command> ::= [<prefixes>] <command_name> (<argument>)*``
|
|
``<argument> ::= (<string> | " <quoted_string> " )``
|
|
|
|
``command_name`` is an unquoted string with the command name itself. See
|
|
`List of Input Commands`_ for a list.
|
|
|
|
Arguments are separated by whitespace. This applies even to string arguments.
|
|
For this reason, string arguments should be quoted with ``"``. If a string
|
|
argument contains spaces or certain special characters, quoting and possibly
|
|
escaping is mandatory, or the command cannot be parsed correctly.
|
|
|
|
Inside quotes, C-style escaping can be used. JSON escapes according to RFC 8259,
|
|
minus surrogate pair escapes, should be a safe subset that can be used.
|
|
|
|
Commands specified as arrays
|
|
----------------------------
|
|
|
|
This applies to certain APIs, such as ``mp.commandv()`` or
|
|
``mp.command_native()`` (with array parameters) in Lua scripting, or
|
|
``mpv_command()`` or ``mpv_command_node()`` (with MPV_FORMAT_NODE_ARRAY) in the
|
|
C libmpv client API.
|
|
|
|
The command as well as all arguments are passed as a single array. Similar to
|
|
the `Flat command syntax`_, you can first pass prefixes as strings (each as
|
|
separate array item), then the command name as string, and then each argument
|
|
as string or a native value.
|
|
|
|
Since these APIs pass arguments as separate strings or native values, they do
|
|
not expect quotes, and do support escaping. Technically, there is the input.conf
|
|
parser, which first splits the command string into arguments, and then invokes
|
|
argument parsers for each argument. The input.conf parser normally handles
|
|
quotes and escaping. The array command APIs mentioned above pass strings
|
|
directly to the argument parsers, or can sidestep them by the ability to pass
|
|
non-string values.
|
|
|
|
Sometimes commands have string arguments, that in turn are actually parsed by
|
|
other components (e.g. filter strings with ``vf add``) - in these cases, you
|
|
you would have to double-escape in input.conf, but not with the array APIs.
|
|
|
|
For complex commands, consider using `Named arguments`_ instead, which should
|
|
give slightly more compatibility. Some commands do not support named arguments
|
|
and inherently take an array, though.
|
|
|
|
Named arguments
|
|
---------------
|
|
|
|
This applies to certain APIs, such as ``mp.command_native()`` (with tables that
|
|
have string keys) in Lua scripting, or ``mpv_command_node()`` (with
|
|
MPV_FORMAT_NODE_MAP) in the C libmpv client API.
|
|
|
|
Like with array commands, quoting and escaping is inherently not needed in the
|
|
normal case.
|
|
|
|
The name of each command is defined in each command description in the
|
|
`List of Input Commands`_. ``--input-cmdlist`` also lists them.
|
|
|
|
Some commands do not support named arguments (e.g. ``run`` command). You need
|
|
to use APIs that pass arguments as arrays.
|
|
|
|
Named arguments are not supported in the "flat" input.conf syntax, which means
|
|
you cannot use them for key bindings in input.conf at all.
|
|
|
|
List of Input Commands
|
|
----------------------
|
|
|
|
Commands with parameters have the parameter name enclosed in ``<`` / ``>``.
|
|
Don't add those to the actual command. Optional arguments are enclosed in
|
|
``[`` / ``]``. If you don't pass them, they will be set to a default value.
|
|
|
|
Remember to quote string arguments in input.conf (see `Flat command syntax`_).
|
|
|
|
``ignore``
|
|
Use this to "block" keys that should be unbound, and do nothing. Useful for
|
|
disabling default bindings, without disabling all bindings with
|
|
``--no-input-default-bindings``.
|
|
|
|
``seek <target> [<flags>]``
|
|
Change the playback position. By default, seeks by a relative amount of
|
|
seconds.
|
|
|
|
The second argument consists of flags controlling the seek mode:
|
|
|
|
relative (default)
|
|
Seek relative to current position (a negative value seeks backwards).
|
|
absolute
|
|
Seek to a given time (a negative value starts from the end of the file).
|
|
absolute-percent
|
|
Seek to a given percent position.
|
|
relative-percent
|
|
Seek relative to current position in percent.
|
|
keyframes
|
|
Always restart playback at keyframe boundaries (fast).
|
|
exact
|
|
Always do exact/hr/precise seeks (slow).
|
|
|
|
Multiple flags can be combined, e.g.: ``absolute+keyframes``.
|
|
|
|
By default, ``keyframes`` is used for ``relative``, ``relative-percent``,
|
|
and ``absolute-percent`` seeks, while ``exact`` is used for ``absolute``
|
|
seeks.
|
|
|
|
Before mpv 0.9, the ``keyframes`` and ``exact`` flags had to be passed as
|
|
3rd parameter (essentially using a space instead of ``+``). The 3rd
|
|
parameter is still parsed, but is considered deprecated.
|
|
|
|
``revert-seek [<flags>]``
|
|
Undoes the ``seek`` command, and some other commands that seek (but not
|
|
necessarily all of them). Calling this command once will jump to the
|
|
playback position before the seek. Calling it a second time undoes the
|
|
``revert-seek`` command itself. This only works within a single file.
|
|
|
|
The first argument is optional, and can change the behavior:
|
|
|
|
mark
|
|
Mark the current time position. The next normal ``revert-seek`` command
|
|
will seek back to this point, no matter how many seeks happened since
|
|
last time.
|
|
|
|
Using it without any arguments gives you the default behavior.
|
|
|
|
``frame-step``
|
|
Play one frame, then pause. Does nothing with audio-only playback.
|
|
|
|
``frame-back-step``
|
|
Go back by one frame, then pause. Note that this can be very slow (it tries
|
|
to be precise, not fast), and sometimes fails to behave as expected. How
|
|
well this works depends on whether precise seeking works correctly (e.g.
|
|
see the ``--hr-seek-demuxer-offset`` option). Video filters or other video
|
|
post-processing that modifies timing of frames (e.g. deinterlacing) should
|
|
usually work, but might make backstepping silently behave incorrectly in
|
|
corner cases. Using ``--hr-seek-framedrop=no`` should help, although it
|
|
might make precise seeking slower.
|
|
|
|
This does not work with audio-only playback.
|
|
|
|
``set <name> <value>``
|
|
Set the given property or option to the given value.
|
|
|
|
``add <name> [<value>]``
|
|
Add the given value to the property or option. On overflow or underflow,
|
|
clamp the property to the maximum. If ``<value>`` is omitted, assume ``1``.
|
|
|
|
``cycle <name> [<value>]``
|
|
Cycle the given property or option. The second argument can be ``up`` or
|
|
``down`` to set the cycle direction. On overflow, set the property back to
|
|
the minimum, on underflow set it to the maximum. If ``up`` or ``down`` is
|
|
omitted, assume ``up``.
|
|
|
|
``multiply <name> <value>``
|
|
Similar to ``add``, but multiplies the property or option with the numeric
|
|
value.
|
|
|
|
``screenshot <flags>``
|
|
Take a screenshot.
|
|
|
|
Multiple flags are available (some can be combined with ``+``):
|
|
|
|
<subtitles> (default)
|
|
Save the video image, in its original resolution, and with subtitles.
|
|
Some video outputs may still include the OSD in the output under certain
|
|
circumstances.
|
|
<video>
|
|
Like ``subtitles``, but typically without OSD or subtitles. The exact
|
|
behavior depends on the selected video output.
|
|
<window>
|
|
Save the contents of the mpv window. Typically scaled, with OSD and
|
|
subtitles. The exact behavior depends on the selected video output, and
|
|
if no support is available, this will act like ``video``.
|
|
<each-frame>
|
|
Take a screenshot each frame. Issue this command again to stop taking
|
|
screenshots. Note that you should disable frame-dropping when using
|
|
this mode - or you might receive duplicate images in cases when a
|
|
frame was dropped. This flag can be combined with the other flags,
|
|
e.g. ``video+each-frame``.
|
|
|
|
Older mpv versions required passing ``single`` and ``each-frame`` as
|
|
second argument (and did not have flags). This syntax is still understood,
|
|
but deprecated and might be removed in the future.
|
|
|
|
If you combine this command with another one using ``;``, you can use the
|
|
``async`` flag to make encoding/writing the image file asynchronous. For
|
|
normal standalone commands, this is always asynchronous, and the flag has
|
|
no effect. (This behavior changed with mpv 0.29.0.)
|
|
|
|
``screenshot-to-file <filename> <flags>``
|
|
Take a screenshot and save it to a given file. The format of the file will
|
|
be guessed by the extension (and ``--screenshot-format`` is ignored - the
|
|
behavior when the extension is missing or unknown is arbitrary).
|
|
|
|
The second argument is like the first argument to ``screenshot`` and
|
|
supports ``subtitles``, ``video``, ``window``.
|
|
|
|
If the file already exists, it's overwritten.
|
|
|
|
Like all input command parameters, the filename is subject to property
|
|
expansion as described in `Property Expansion`_.
|
|
|
|
``playlist-next <flags>``
|
|
Go to the next entry on the playlist.
|
|
|
|
First argument:
|
|
|
|
weak (default)
|
|
If the last file on the playlist is currently played, do nothing.
|
|
force
|
|
Terminate playback if there are no more files on the playlist.
|
|
|
|
``playlist-prev <flags>``
|
|
Go to the previous entry on the playlist.
|
|
|
|
First argument:
|
|
|
|
weak (default)
|
|
If the first file on the playlist is currently played, do nothing.
|
|
force
|
|
Terminate playback if the first file is being played.
|
|
|
|
``loadfile <url> [<flags> [<options>]]``
|
|
Load the given file or URL and play it.
|
|
|
|
Second argument:
|
|
|
|
<replace> (default)
|
|
Stop playback of the current file, and play the new file immediately.
|
|
<append>
|
|
Append the file to the playlist.
|
|
<append-play>
|
|
Append the file, and if nothing is currently playing, start playback.
|
|
(Always starts with the added file, even if the playlist was not empty
|
|
before running this command.)
|
|
|
|
The third argument is a list of options and values which should be set
|
|
while the file is playing. It is of the form ``opt1=value1,opt2=value2,..``.
|
|
Not all options can be changed this way. Some options require a restart
|
|
of the player.
|
|
|
|
``loadlist <url> [<flags>]``
|
|
Load the given playlist file or URL (like ``--playlist``).
|
|
|
|
Second argument:
|
|
|
|
<replace> (default)
|
|
Stop playback and replace the internal playlist with the new one.
|
|
<append>
|
|
Append the new playlist at the end of the current internal playlist.
|
|
|
|
``playlist-clear``
|
|
Clear the playlist, except the currently played file.
|
|
|
|
``playlist-remove <index>``
|
|
Remove the playlist entry at the given index. Index values start counting
|
|
with 0. The special value ``current`` removes the current entry. Note that
|
|
removing the current entry also stops playback and starts playing the next
|
|
entry.
|
|
|
|
``playlist-move <index1> <index2>``
|
|
Move the playlist entry at index1, so that it takes the place of the
|
|
entry index2. (Paradoxically, the moved playlist entry will not have
|
|
the index value index2 after moving if index1 was lower than index2,
|
|
because index2 refers to the target entry, not the index the entry
|
|
will have after moving.)
|
|
|
|
``playlist-shuffle``
|
|
Shuffle the playlist. This is similar to what is done on start if the
|
|
``--shuffle`` option is used.
|
|
|
|
``playlist-unshuffle``
|
|
Attempt to revert the previous ``playlist-shuffle`` command. This works
|
|
only once (multiple successive ``playlist-unshuffle`` commands do nothing).
|
|
May not work correctly if new recursive playlists have been opened since
|
|
a ``playlist-shuffle`` command.
|
|
|
|
``run <command> [<arg1> [<arg2> [...]]]``
|
|
Run the given command. Unlike in MPlayer/mplayer2 and earlier versions of
|
|
mpv (0.2.x and older), this doesn't call the shell. Instead, the command
|
|
is run directly, with each argument passed separately. Each argument is
|
|
expanded like in `Property Expansion`_.
|
|
|
|
This command has a variable number of arguments, and cannot be used with
|
|
named arguments.
|
|
|
|
The program is run in a detached way. mpv doesn't wait until the command
|
|
is completed, but continues playback right after spawning it.
|
|
|
|
To get the old behavior, use ``/bin/sh`` and ``-c`` as the first two
|
|
arguments.
|
|
|
|
.. admonition:: Example
|
|
|
|
``run "/bin/sh" "-c" "echo ${title} > /tmp/playing"``
|
|
|
|
This is not a particularly good example, because it doesn't handle
|
|
escaping, and a specially prepared file might allow an attacker to
|
|
execute arbitrary shell commands. It is recommended to write a small
|
|
shell script, and call that with ``run``.
|
|
|
|
``subprocess``
|
|
Similar to ``run``, but gives more control about process execution to the
|
|
caller, and does does not detach the process.
|
|
|
|
You can avoid blocking until the process terminates by running this command
|
|
asynchronously. (For example ``mp.command_native_async()`` in Lua scripting.)
|
|
|
|
This has the following named arguments. The order of them is not guaranteed,
|
|
so you should always call them with named arguments, see `Named arguments`_.
|
|
|
|
``args`` (``MPV_FORMAT_NODE_ARRAY[MPV_FORMAT_STRING]``)
|
|
Array of strings with the command as first argument, and subsequent
|
|
command line arguments following. This is just like the ``run`` command
|
|
argument list.
|
|
|
|
The first array entry is either an absolute path to the executable, or
|
|
a filename with no path components, in which case the ``PATH``
|
|
environment variable. On Unix, this is equivalent to ``posix_spawnp``
|
|
and ``execvp`` behavior.
|
|
|
|
``playback_only`` (``MPV_FORMAT_FLAG``)
|
|
Boolean indicating whether the process should be killed when playback
|
|
terminates (optional, default: yes). If enabled, stopping playback
|
|
will automatically kill the process, and you can't start it outside of
|
|
playback.
|
|
|
|
``capture_size`` (``MPV_FORMAT_INT64``)
|
|
Integer setting the maximum number of stdout plus stderr bytes that can
|
|
be captured (optional, default: 64MB). If the number of bytes exceeds
|
|
this, capturing is stopped. The limit is per captured stream.
|
|
|
|
``capture_stdout`` (``MPV_FORMAT_FLAG``)
|
|
Capture all data the process outputs to stdout and return it once the
|
|
process ends (optional, default: no).
|
|
|
|
``capture_stderr`` (``MPV_FORMAT_FLAG``)
|
|
Same as ``capture_stdout``, but for stderr.
|
|
|
|
The command returns the following result (as ``MPV_FORMAT_NODE_MAP``):
|
|
|
|
``status`` (``MPV_FORMAT_INT64``)
|
|
The raw exit status of the process. It will be negative on error. The
|
|
meaning of negative values is undefined, other than meaning error (and
|
|
does not necessarily correspond to OS low level exit status values).
|
|
|
|
On Windows, it can happen that a negative return value is returned
|
|
even if the process exits gracefully, because the win32 ``UINT`` exit
|
|
code is assigned to an ``int`` variable before being set as ``int64_t``
|
|
field in the result map. This might be fixed later.
|
|
|
|
``stdout`` (``MPV_FORMAT_BYTE_ARRAY``)
|
|
Captured stdout stream, limited to ``capture_size``.
|
|
|
|
``stderr`` (``MPV_FORMAT_BYTE_ARRAY``)
|
|
Same as ``stdout``, but for stderr.
|
|
|
|
``error_string`` (``MPV_FORMAT_STRING``)
|
|
Empty string if the process exited gracefully. The string ``killed`` if
|
|
the process was terminated in an unusual way. The string ``init`` if the
|
|
process could not be started.
|
|
|
|
On Windows, ``killed`` is only returned when the process has been
|
|
killed by mpv as a result of ``playback_only`` being set to ``yes``.
|
|
|
|
``killed_by_us`` (``MPV_FORMAT_FLAG``)
|
|
Set to ``yes`` if the process has been killed by mpv, for example as a
|
|
result of ``playback_only`` being set to ``yes``, aborting the command
|
|
(e.g. by ``mp.abort_async_command()``), or if the player is about to
|
|
exit.
|
|
|
|
Note that the command itself will always return success as long as the
|
|
parameters are correct. Whether the process could be spawned or whether
|
|
it was somehow killed or returned an error status has to be queried from
|
|
the result value.
|
|
|
|
This command can be asynchronously aborted via API.
|
|
|
|
In all cases, the subprocess will be terminated on player exit. Also see
|
|
`Asynchronous command details`_. Only the ``run`` command can start
|
|
processes in a truly detached way.
|
|
|
|
.. admonition:: Warning
|
|
|
|
Don't forget to set the ``playback_only`` field if you want the command
|
|
run while the player is in idle mode, or if you don't want that end of
|
|
playback kills the command.
|
|
|
|
``quit [<code>]``
|
|
Exit the player. If an argument is given, it's used as process exit code.
|
|
|
|
``quit-watch-later [<code>]``
|
|
Exit player, and store current playback position. Playing that file later
|
|
will seek to the previous position on start. The (optional) argument is
|
|
exactly as in the ``quit`` command.
|
|
|
|
``sub-add <url> [<flags> [<title> [<lang>]]]``
|
|
Load the given subtitle file or stream. By default, it is selected as
|
|
current subtitle after loading.
|
|
|
|
The ``flags`` argument is one of the following values:
|
|
|
|
<select>
|
|
|
|
Select the subtitle immediately (default).
|
|
|
|
<auto>
|
|
|
|
Don't select the subtitle. (Or in some special situations, let the
|
|
default stream selection mechanism decide.)
|
|
|
|
<cached>
|
|
|
|
Select the subtitle. If a subtitle with the same filename was already
|
|
added, that one is selected, instead of loading a duplicate entry.
|
|
(In this case, title/language are ignored, and if the was changed since
|
|
it was loaded, these changes won't be reflected.)
|
|
|
|
The ``title`` argument sets the track title in the UI.
|
|
|
|
The ``lang`` argument sets the track language, and can also influence
|
|
stream selection with ``flags`` set to ``auto``.
|
|
|
|
``sub-remove [<id>]``
|
|
Remove the given subtitle track. If the ``id`` argument is missing, remove
|
|
the current track. (Works on external subtitle files only.)
|
|
|
|
``sub-reload [<id>]``
|
|
Reload the given subtitle tracks. If the ``id`` argument is missing, reload
|
|
the current track. (Works on external subtitle files only.)
|
|
|
|
This works by unloading and re-adding the subtitle track.
|
|
|
|
``sub-step <skip>``
|
|
Change subtitle timing such, that the subtitle event after the next
|
|
``<skip>`` subtitle events is displayed. ``<skip>`` can be negative to step
|
|
backwards.
|
|
|
|
``sub-seek <skip>``
|
|
Seek to the next (skip set to 1) or the previous (skip set to -1) subtitle.
|
|
This is similar to ``sub-step``, except that it seeks video and audio
|
|
instead of adjusting the subtitle delay.
|
|
|
|
For embedded subtitles (like with Matroska), this works only with subtitle
|
|
events that have already been displayed, or are within a short prefetch
|
|
range.
|
|
|
|
``print-text <text>``
|
|
Print text to stdout. The string can contain properties (see
|
|
`Property Expansion`_). Take care to put the argument in quotes.
|
|
|
|
``show-text <text> [<duration>|-1 [<level>]]``
|
|
Show text on the OSD. The string can contain properties, which are expanded
|
|
as described in `Property Expansion`_. This can be used to show playback
|
|
time, filename, and so on.
|
|
|
|
<duration>
|
|
The time in ms to show the message for. By default, it uses the same
|
|
value as ``--osd-duration``.
|
|
|
|
<level>
|
|
The minimum OSD level to show the text at (see ``--osd-level``).
|
|
|
|
``expand-text <string>``
|
|
Property-expand the argument and return the expanded string. This can be
|
|
used only through the client API or from a script using
|
|
``mp.command_native``. (see `Property Expansion`_).
|
|
|
|
``expand-path "<string>"``
|
|
Expand a path's double-tilde placeholders into a platform-specific path.
|
|
As ``expand-text``, this can only be used through the client API or from
|
|
a script using ``mp.command_native``.
|
|
|
|
.. admonition:: Example
|
|
|
|
``mp.osd_message(mp.command_native({"expand-path", "~~home/"}))``
|
|
|
|
This line of Lua would show the location of the user's mpv
|
|
configuration directory on the OSD.
|
|
|
|
``show-progress``
|
|
Show the progress bar, the elapsed time and the total duration of the file
|
|
on the OSD.
|
|
|
|
``write-watch-later-config``
|
|
Write the resume config file that the ``quit-watch-later`` command writes,
|
|
but continue playback normally.
|
|
|
|
``stop``
|
|
Stop playback and clear playlist. With default settings, this is
|
|
essentially like ``quit``. Useful for the client API: playback can be
|
|
stopped without terminating the player.
|
|
|
|
``mouse <x> <y> [<button> [<mode>]]``
|
|
Send a mouse event with given coordinate (``<x>``, ``<y>``).
|
|
|
|
Second argument:
|
|
|
|
<button>
|
|
The button number of clicked mouse button. This should be one of 0-19.
|
|
If ``<button>`` is omitted, only the position will be updated.
|
|
|
|
Third argument:
|
|
|
|
<single> (default)
|
|
The mouse event represents regular single click.
|
|
|
|
<double>
|
|
The mouse event represents double-click.
|
|
|
|
``keypress <name>``
|
|
Send a key event through mpv's input handler, triggering whatever
|
|
behavior is configured to that key. ``name`` uses the ``input.conf``
|
|
naming scheme for keys and modifiers. Useful for the client API: key events
|
|
can be sent to libmpv to handle internally.
|
|
|
|
``keydown <name>``
|
|
Similar to ``keypress``, but sets the ``KEYDOWN`` flag so that if the key is
|
|
bound to a repeatable command, it will be run repeatedly with mpv's key
|
|
repeat timing until the ``keyup`` command is called.
|
|
|
|
``keyup [<name>]``
|
|
Set the ``KEYUP`` flag, stopping any repeated behavior that had been
|
|
triggered. ``name`` is optional. If ``name`` is not given or is an
|
|
empty string, ``KEYUP`` will be set on all keys. Otherwise, ``KEYUP`` will
|
|
only be set on the key specified by ``name``.
|
|
|
|
``keybind <name> <command>``
|
|
Binds a key to an input command. ``command`` must be a complete command
|
|
containing all the desired arguments and flags. Both ``name`` and
|
|
``command`` use the ``input.conf`` naming scheme. This is primarily
|
|
useful for the client API.
|
|
|
|
``audio-add <url> [<flags> [<title> [<lang>]]]``
|
|
Load the given audio file. See ``sub-add`` command.
|
|
|
|
``audio-remove [<id>]``
|
|
Remove the given audio track. See ``sub-remove`` command.
|
|
|
|
``audio-reload [<id>]``
|
|
Reload the given audio tracks. See ``sub-reload`` command.
|
|
|
|
``video-add <url> [<flags> [<title> [<lang>]]]``
|
|
Load the given video file. See ``sub-add`` command.
|
|
|
|
``video-remove [<id>]``
|
|
Remove the given video track. See ``sub-remove`` command.
|
|
|
|
``video-reload [<id>]``
|
|
Reload the given video tracks. See ``sub-reload`` command.
|
|
|
|
``rescan-external-files [<mode>]``
|
|
Rescan external files according to the current ``--sub-auto`` and
|
|
``--audio-file-auto`` settings. This can be used to auto-load external
|
|
files *after* the file was loaded.
|
|
|
|
The ``mode`` argument is one of the following:
|
|
|
|
<reselect> (default)
|
|
Select the default audio and subtitle streams, which typically selects
|
|
external files with the highest preference. (The implementation is not
|
|
perfect, and could be improved on request.)
|
|
|
|
<keep-selection>
|
|
Do not change current track selections.
|
|
|
|
|
|
Input Commands that are Possibly Subject to Change
|
|
--------------------------------------------------
|
|
|
|
``af <operation> <value>``
|
|
Change audio filter chain. See ``vf`` command.
|
|
|
|
``vf <operation> <value>``
|
|
Change video filter chain.
|
|
|
|
The semantics are exactly the same as with option parsing (see
|
|
`VIDEO FILTERS`_). As such the text below is a redundant and incomplete
|
|
summary.
|
|
|
|
The first argument decides what happens:
|
|
|
|
<set>
|
|
Overwrite the previous filter chain with the new one.
|
|
|
|
<add>
|
|
Append the new filter chain to the previous one.
|
|
|
|
<toggle>
|
|
Check if the given filter (with the exact parameters) is already
|
|
in the video chain. If yes, remove the filter. If no, add the filter.
|
|
(If several filters are passed to the command, this is done for
|
|
each filter.)
|
|
|
|
A special variant is combining this with labels, and using ``@name``
|
|
without filter name and parameters as filter entry. This toggles the
|
|
enable/disable flag.
|
|
|
|
<del>
|
|
Remove the given filters from the video chain. Unlike in the other
|
|
cases, the second parameter is a comma separated list of filter names
|
|
or integer indexes. ``0`` would denote the first filter. Negative
|
|
indexes start from the last filter, and ``-1`` denotes the last
|
|
filter. Deprecated.
|
|
|
|
<clr>
|
|
Remove all filters. Note that like the other sub-commands, this does
|
|
not control automatically inserted filters.
|
|
|
|
The argument is always needed. E.g. in case of ``clr`` use ``vf clr ""``.
|
|
|
|
You can assign labels to filter by prefixing them with ``@name:`` (where
|
|
``name`` is a user-chosen arbitrary identifier). Labels can be used to
|
|
refer to filters by name in all of the filter chain modification commands.
|
|
For ``add``, using an already used label will replace the existing filter.
|
|
|
|
The ``vf`` command shows the list of requested filters on the OSD after
|
|
changing the filter chain. This is roughly equivalent to
|
|
``show-text ${vf}``. Note that auto-inserted filters for format conversion
|
|
are not shown on the list, only what was requested by the user.
|
|
|
|
Normally, the commands will check whether the video chain is recreated
|
|
successfully, and will undo the operation on failure. If the command is run
|
|
before video is configured (can happen if the command is run immediately
|
|
after opening a file and before a video frame is decoded), this check can't
|
|
be run. Then it can happen that creating the video chain fails.
|
|
|
|
.. admonition:: Example for input.conf
|
|
|
|
- ``a vf set flip`` turn video upside-down on the ``a`` key
|
|
- ``b vf set ""`` remove all video filters on ``b``
|
|
- ``c vf toggle gradfun`` toggle debanding on ``c``
|
|
|
|
.. admonition:: Example how to toggle disabled filters at runtime
|
|
|
|
- Add something like ``vf-add=@deband:!gradfun`` to ``mpv.conf``.
|
|
The ``@deband:`` is the label, an arbitrary, user-given name for this
|
|
filter entry. The ``!`` before the filter name disables the filter by
|
|
default. Everything after this is the normal filter name and possibly
|
|
filter parameters, like in the normal ``--vf`` syntax.
|
|
- Add ``a vf toggle @deband`` to ``input.conf``. This toggles the
|
|
"disabled" flag for the filter with the label ``deband`` when the
|
|
``a`` key is hit.
|
|
|
|
``cycle-values [<"!reverse">] <property> <value1> [<value2> [...]]``
|
|
Cycle through a list of values. Each invocation of the command will set the
|
|
given property to the next value in the list. The command will use the
|
|
current value of the property/option, and use it to determine the current
|
|
position in the list of values. Once it has found it, it will set the
|
|
next value in the list (wrapping around to the first item if needed).
|
|
|
|
This command has a variable number of arguments, and cannot be used with
|
|
named arguments.
|
|
|
|
The special argument ``!reverse`` can be used to cycle the value list in
|
|
reverse. The only advantage is that you don't need to reverse the value
|
|
list yourself when adding a second key binding for cycling backwards.
|
|
|
|
``enable-section <name> [<flags>]``
|
|
This command is deprecated, except for mpv-internal uses.
|
|
|
|
Enable all key bindings in the named input section.
|
|
|
|
The enabled input sections form a stack. Bindings in sections on the top of
|
|
the stack are preferred to lower sections. This command puts the section
|
|
on top of the stack. If the section was already on the stack, it is
|
|
implicitly removed beforehand. (A section cannot be on the stack more than
|
|
once.)
|
|
|
|
The ``flags`` parameter can be a combination (separated by ``+``) of the
|
|
following flags:
|
|
|
|
<exclusive>
|
|
All sections enabled before the newly enabled section are disabled.
|
|
They will be re-enabled as soon as all exclusive sections above them
|
|
are removed. In other words, the new section shadows all previous
|
|
sections.
|
|
<allow-hide-cursor>
|
|
This feature can't be used through the public API.
|
|
<allow-vo-dragging>
|
|
Same.
|
|
|
|
``disable-section <name>``
|
|
This command is deprecated, except for mpv-internal uses.
|
|
|
|
Disable the named input section. Undoes ``enable-section``.
|
|
|
|
``define-section <name> <contents> [<flags>]``
|
|
This command is deprecated, except for mpv-internal uses.
|
|
|
|
Create a named input section, or replace the contents of an already existing
|
|
input section. The ``contents`` parameter uses the same syntax as the
|
|
``input.conf`` file (except that using the section syntax in it is not
|
|
allowed), including the need to separate bindings with a newline character.
|
|
|
|
If the ``contents`` parameter is an empty string, the section is removed.
|
|
|
|
The section with the name ``default`` is the normal input section.
|
|
|
|
In general, input sections have to be enabled with the ``enable-section``
|
|
command, or they are ignored.
|
|
|
|
The last parameter has the following meaning:
|
|
|
|
<default> (also used if parameter omitted)
|
|
Use a key binding defined by this section only if the user hasn't
|
|
already bound this key to a command.
|
|
<force>
|
|
Always bind a key. (The input section that was made active most recently
|
|
wins if there are ambiguities.)
|
|
|
|
This command can be used to dispatch arbitrary keys to a script or a client
|
|
API user. If the input section defines ``script-binding`` commands, it is
|
|
also possible to get separate events on key up/down, and relatively detailed
|
|
information about the key state. The special key name ``unmapped`` can be
|
|
used to match any unmapped key.
|
|
|
|
``overlay-add <id> <x> <y> <file> <offset> <fmt> <w> <h> <stride>``
|
|
Add an OSD overlay sourced from raw data. This might be useful for scripts
|
|
and applications controlling mpv, and which want to display things on top
|
|
of the video window.
|
|
|
|
Overlays are usually displayed in screen resolution, but with some VOs,
|
|
the resolution is reduced to that of the video's. You can read the
|
|
``osd-width`` and ``osd-height`` properties. At least with ``--vo-xv`` and
|
|
anamorphic video (such as DVD), ``osd-par`` should be read as well, and the
|
|
overlay should be aspect-compensated.
|
|
|
|
This has the following named arguments. The order of them is not guaranteed,
|
|
so you should always call them with named arguments, see `Named arguments`_.
|
|
|
|
``id`` is an integer between 0 and 63 identifying the overlay element. The
|
|
ID can be used to add multiple overlay parts, update a part by using this
|
|
command with an already existing ID, or to remove a part with
|
|
``overlay-remove``. Using a previously unused ID will add a new overlay,
|
|
while reusing an ID will update it.
|
|
|
|
``x`` and ``y`` specify the position where the OSD should be displayed.
|
|
|
|
``file`` specifies the file the raw image data is read from. It can be
|
|
either a numeric UNIX file descriptor prefixed with ``@`` (e.g. ``@4``),
|
|
or a filename. The file will be mapped into memory with ``mmap()``,
|
|
copied, and unmapped before the command returns (changed in mpv 0.18.1).
|
|
|
|
It is also possible to pass a raw memory address for use as bitmap memory
|
|
by passing a memory address as integer prefixed with an ``&`` character.
|
|
Passing the wrong thing here will crash the player. This mode might be
|
|
useful for use with libmpv. The ``offset`` parameter is simply added to the
|
|
memory address (since mpv 0.8.0, ignored before).
|
|
|
|
``offset`` is the byte offset of the first pixel in the source file.
|
|
(The current implementation always mmap's the whole file from position 0 to
|
|
the end of the image, so large offsets should be avoided. Before mpv 0.8.0,
|
|
the offset was actually passed directly to ``mmap``, but it was changed to
|
|
make using it easier.)
|
|
|
|
``fmt`` is a string identifying the image format. Currently, only ``bgra``
|
|
is defined. This format has 4 bytes per pixels, with 8 bits per component.
|
|
The least significant 8 bits are blue, and the most significant 8 bits
|
|
are alpha (in little endian, the components are B-G-R-A, with B as first
|
|
byte). This uses premultiplied alpha: every color component is already
|
|
multiplied with the alpha component. This means the numeric value of each
|
|
component is equal to or smaller than the alpha component. (Violating this
|
|
rule will lead to different results with different VOs: numeric overflows
|
|
resulting from blending broken alpha values is considered something that
|
|
shouldn't happen, and consequently implementations don't ensure that you
|
|
get predictable behavior in this case.)
|
|
|
|
``w``, ``h``, and ``stride`` specify the size of the overlay. ``w`` is the
|
|
visible width of the overlay, while ``stride`` gives the width in bytes in
|
|
memory. In the simple case, and with the ``bgra`` format, ``stride==4*w``.
|
|
In general, the total amount of memory accessed is ``stride * h``.
|
|
(Technically, the minimum size would be ``stride * (h - 1) + w * 4``, but
|
|
for simplicity, the player will access all ``stride * h`` bytes.)
|
|
|
|
.. note::
|
|
|
|
Before mpv 0.18.1, you had to do manual "double buffering" when updating
|
|
an overlay by replacing it with a different memory buffer. Since mpv
|
|
0.18.1, the memory is simply copied and doesn't reference any of the
|
|
memory indicated by the command's arguments after the commend returns.
|
|
If you want to use this command before mpv 0.18.1, reads the old docs
|
|
to see how to handle this correctly.
|
|
|
|
``overlay-remove <id>``
|
|
Remove an overlay added with ``overlay-add`` and the same ID. Does nothing
|
|
if no overlay with this ID exists.
|
|
|
|
``osd-overlay``
|
|
Add/update/remove an OSD overlay.
|
|
|
|
(Although this sounds similar to ``overlay-add``, ``osd-overlay`` is for
|
|
text overlays, while ``overlay-add`` is for bitmaps. Maybe ``overlay-add``
|
|
will be merged into ``osd-overlay`` to remove this oddity.)
|
|
|
|
You can use this to add text overlays in ASS format. ASS has advanced
|
|
positioning and rendering tags, which can be used to render almost any kind
|
|
of vector graphics.
|
|
|
|
This command accepts the following parameters:
|
|
|
|
``id``
|
|
Arbitrary integer that identifies the overlay. Multiple overlays can be
|
|
added by calling this command with different ``id`` parameters. Calling
|
|
this command with the same ``id`` replaces the previously set overlay.
|
|
|
|
There is a separate namespace for each libmpv client (i.e. IPC
|
|
connection, script), so IDs can be made up and assigned by the API user
|
|
without conflicting with other API users.
|
|
|
|
If the libmpv client is destroyed, all overlays associated with it are
|
|
also deleted. In particular, connecting via ``--input-ipc-server``,
|
|
adding an overlay, and disconnecting will remove the overlay immediately
|
|
again.
|
|
|
|
``format``
|
|
String that gives the type of the overlay. Accepts the following values:
|
|
|
|
``ass-events``
|
|
The ``data`` parameter is a string. The string is split on the
|
|
newline character. Every line is turned into the ``Text`` part of
|
|
a ``Dialogue`` ASS event. Timing is unused (but behavior of timing
|
|
dependent ASS tags may change in future mpv versions).
|
|
|
|
Note that it's better to put multiple lines into ``data``, instead
|
|
of adding multiple OSD overlays.
|
|
|
|
This provides 2 ASS ``Styles``. ``OSD`` contains the text style as
|
|
defined by the current ``--osd-...`` options. ``Default`` is
|
|
similar, and contains style that ``OSD`` would have if all options
|
|
were set to the default.
|
|
|
|
In addition, the ``res_x`` and ``res_y`` options specify the value
|
|
of the ASS ``PlayResX`` and ``PlayResY`` header fields. If ``res_y``
|
|
is set to 0, ``PlayResY`` is initialized to an arbitrary default
|
|
value (but note that the default for this command is 720, not 0).
|
|
If ``res_x`` is set to 0, ``PlayResX`` is set based on ``res_y``
|
|
such that a virtual ASS pixel has a square pixel aspect ratio.
|
|
|
|
``none``
|
|
Special value that causes the overlay to be removed. Most parameters
|
|
other than ``id`` and ``format`` are mostly ignored.
|
|
|
|
``data``
|
|
String defining the overlay contents according to the ``format``
|
|
parameter.
|
|
|
|
``res_x``, ``res_y``
|
|
Used if ``format`` is set to ``ass-events`` (see description there).
|
|
Optional, defaults to 0/720.
|
|
|
|
``z``
|
|
The Z order of the overlay. Optional, defaults to 0.
|
|
|
|
Note that Z order between different overlays of different formats is
|
|
static, and cannot be changed (currently, this means that bitmap
|
|
overlays added by ``overlay-add`` are always on top of the ASS overlays
|
|
added by ``osd-overlay``). In addition, the builtin OSD components are
|
|
always below any of the custom OSD. (This includes subtitles of any kind
|
|
as well as text rendered by ``show-text``.)
|
|
|
|
It's possible that future mpv versions will randomly change how Z order
|
|
between different OSD formats and builtin OSD is handled.
|
|
|
|
Note: always use named arguments (``mpv_command_node()``). Scripts should
|
|
use the ``mp.create_osd_overlay()`` helper instead of invoking this command
|
|
directly.
|
|
|
|
``script-message [<arg1> [<arg2> [...]]]``
|
|
Send a message to all clients, and pass it the following list of arguments.
|
|
What this message means, how many arguments it takes, and what the arguments
|
|
mean is fully up to the receiver and the sender. Every client receives the
|
|
message, so be careful about name clashes (or use ``script-message-to``).
|
|
|
|
This command has a variable number of arguments, and cannot be used with
|
|
named arguments.
|
|
|
|
``script-message-to <target> [<arg1> [<arg2> [...]]]``
|
|
Same as ``script-message``, but send it only to the client named
|
|
``<target>``. Each client (scripts etc.) has a unique name. For example,
|
|
Lua scripts can get their name via ``mp.get_script_name()``.
|
|
|
|
This command has a variable number of arguments, and cannot be used with
|
|
named arguments.
|
|
|
|
``script-binding <name>``
|
|
Invoke a script-provided key binding. This can be used to remap key
|
|
bindings provided by external Lua scripts.
|
|
|
|
The argument is the name of the binding.
|
|
|
|
It can optionally be prefixed with the name of the script, using ``/`` as
|
|
separator, e.g. ``script-binding scriptname/bindingname``.
|
|
|
|
For completeness, here is how this command works internally. The details
|
|
could change any time. On any matching key event, ``script-message-to``
|
|
or ``script-message`` is called (depending on whether the script name is
|
|
included), with the following arguments:
|
|
|
|
1. The string ``key-binding``.
|
|
2. The name of the binding (as established above).
|
|
3. The key state as string (see below).
|
|
4. The key name (since mpv 0.15.0).
|
|
5. The text the key would produce, or empty string if not applicable.
|
|
|
|
The 5th argument is only set if no modifiers are present (using the shift
|
|
key with a letter is normally not emitted as having a modifier, and results
|
|
in upper case text instead, but some backends may mess up).
|
|
|
|
The key state consists of 2 characters:
|
|
|
|
1. One of ``d`` (key was pressed down), ``u`` (was released), ``r`` (key
|
|
is still down, and was repeated; only if key repeat is enabled for this
|
|
binding), ``p`` (key was pressed; happens if up/down can't be tracked).
|
|
2. Whether the event originates from the mouse, either ``m`` (mouse button)
|
|
or ``-`` (something else).
|
|
|
|
Future versions can add more arguments and more key state characters to
|
|
support more input peculiarities.
|
|
|
|
``ab-loop``
|
|
Cycle through A-B loop states. The first command will set the ``A`` point
|
|
(the ``ab-loop-a`` property); the second the ``B`` point, and the third
|
|
will clear both points.
|
|
|
|
``drop-buffers``
|
|
Drop audio/video/demuxer buffers, and restart from fresh. Might help with
|
|
unseekable streams that are going out of sync.
|
|
This command might be changed or removed in the future.
|
|
|
|
``screenshot-raw [<flags>]``
|
|
Return a screenshot in memory. This can be used only through the client
|
|
API. The MPV_FORMAT_NODE_MAP returned by this command has the ``w``, ``h``,
|
|
``stride`` fields set to obvious contents. The ``format`` field is set to
|
|
``bgr0`` by default. This format is organized as ``B8G8R8X8`` (where ``B``
|
|
is the LSB). The contents of the padding ``X`` are undefined. The ``data``
|
|
field is of type MPV_FORMAT_BYTE_ARRAY with the actual image data. The image
|
|
is freed as soon as the result mpv_node is freed. As usual with client API
|
|
semantics, you are not allowed to write to the image data.
|
|
|
|
The ``stride`` is the number of bytes from a pixel at ``(x0, y0)`` to the
|
|
pixel at ``(x0, y0 + 1)``. This can be larger than ``w * 4`` if the image
|
|
was cropped, or if there is padding. This number can be negative as well.
|
|
You access a pixel with ``byte_index = y * stride + x * 4`` (assuming the
|
|
``bgr0`` format).
|
|
|
|
The ``flags`` argument is like the first argument to ``screenshot`` and
|
|
supports ``subtitles``, ``video``, ``window``.
|
|
|
|
``vf-command <label> <command> <argument>``
|
|
Send a command to the filter with the given ``<label>``. Use ``all`` to send
|
|
it to all filters at once. The command and argument string is filter
|
|
specific. Currently, this only works with the ``lavfi`` filter - see
|
|
the libavfilter documentation for which commands a filter supports.
|
|
|
|
Note that the ``<label>`` is a mpv filter label, not a libavfilter filter
|
|
name.
|
|
|
|
``af-command <label> <command> <argument>``
|
|
Same as ``vf-command``, but for audio filters.
|
|
|
|
``apply-profile <name>``
|
|
Apply the contents of a named profile. This is like using ``profile=name``
|
|
in a config file, except you can map it to a key binding to change it at
|
|
runtime.
|
|
|
|
There is no such thing as "unapplying" a profile - applying a profile
|
|
merely sets all option values listed within the profile.
|
|
|
|
``load-script <filename>``
|
|
Load a script, similar to the ``--script`` option. Whether this waits for
|
|
the script to finish initialization or not changed multiple times, and the
|
|
future behavior is left undefined.
|
|
|
|
``change-list <name> <operation> <value>``
|
|
This command changes list options as described in `List Options`_. The
|
|
``<name>`` parameter is the normal option name, while ``<operation>`` is
|
|
the suffix or action used on the option.
|
|
|
|
Some operations take no value, but the command still requires the value
|
|
parameter. In these cases, the value must be an empty string.
|
|
|
|
.. admonition:: Example
|
|
|
|
``change-list glsl-shaders append file.glsl``
|
|
|
|
Add a filename to the ``glsl-shaders`` list. The command line
|
|
equivalent is ``--glsl-shaders-append=file.glsl`` or alternatively
|
|
``--glsl-shader=file.glsl``.
|
|
|
|
``dump-cache <start> <end> <filename>``
|
|
Dump the current cache to the given filename. The ``<filename>`` file is
|
|
overwritten if it already exists. ``<start>`` and ``<end>`` give the
|
|
time range of what to dump. If no data is cached at the given time range,
|
|
nothing may be dumped (creating a file with no packets).
|
|
|
|
Dumping a larger part of the cache will freeze the player. No effort was
|
|
made to fix this, as this feature was meant mostly for creating small
|
|
excerpts.
|
|
|
|
See ``--stream-record`` for various caveats that mostly apply to this
|
|
command too, as both use the same underlying code for writing the output
|
|
file.
|
|
|
|
If ``<filename>`` is an empty string, an ongoing ``dump-cache`` is stopped.
|
|
|
|
If ``<end>`` is ``no``, then continuous dumping is enabled. Then, after
|
|
dumping the existing parts of the cache, anything read from network is
|
|
appended to the cache as well. This behaves similar to ``--stream-record``
|
|
(although it does not conflict with that option, and they can be both active
|
|
at the same time).
|
|
|
|
If the ``<end>`` time is after the cache, the command will _not_ wait and
|
|
write newly received data to it.
|
|
|
|
The end of the resulting file may be slightly damaged or incomplete at the
|
|
end. (Not enough effort was made to ensure that the end lines up properly.)
|
|
|
|
Note that this command will finish only once dumping ends. That means it
|
|
works similar to the ``screenshot`` command, just that it can block much
|
|
longer. If continuous dumping is used, the command will not finish until
|
|
playback is stopped, an error happens, another ``dump-cache`` command is
|
|
run, or an API like ``mp.abort_async_command`` was called to explicitly stop
|
|
the command. See `Synchronous vs. Asynchronous`_.
|
|
|
|
.. note::
|
|
|
|
This was mostly created for network streams. For local files, there may
|
|
be much better methods to create excerpts and such. There are tons of
|
|
much more user-friendly Lua scripts, that will reencode parts of a file
|
|
by spawning a separate instance of ``ffmpeg``. With network streams,
|
|
this is not that easily possible, as the stream would have to be
|
|
downloaded again. Even if ``--stream-record`` is used to record the
|
|
stream to the local filesystem, there may be problems, because the
|
|
recorded file is still written to.
|
|
|
|
This command is experimental, and all details about it may change in the
|
|
future.
|
|
|
|
``ab-loop-dump-cache <filename>``
|
|
Essentially calls ``dump-cache`` with the current AB-loop points as
|
|
arguments. Like ``dump-cache``, this will overwrite the file at
|
|
``<filename>``. Likewise, if the B point is set to ``no``, it will enter
|
|
continuous dumping after the existing cache was dumped.
|
|
|
|
The author reserves the right to remove this command if enough motivation
|
|
is found to move this functionality to a trivial Lua script.
|
|
|
|
``ab-loop-align-cache``
|
|
Re-adjust the A/B loop points to the start and end within the cache the
|
|
``ab-loop-dump-cache`` command will (probably) dump. Basically, it aligns
|
|
the times on keyframes. The guess might be off especially at the end (due to
|
|
granularity issues due to remuxing). If the cache shrinks in the meantime,
|
|
the points set by the command will not be the effective parameters either.
|
|
|
|
This command has an even more uncertain future than ``ab-loop-dump-cache``
|
|
and might disappear without replacement if the author decides it's useless.
|
|
|
|
Undocumented commands: ``ao-reload`` (experimental/internal).
|
|
|
|
Hooks
|
|
~~~~~
|
|
|
|
Hooks are synchronous events between player core and a script or similar. This
|
|
applies to client API (including the Lua scripting interface). Normally,
|
|
events are supposed to be asynchronous, and the hook API provides an awkward
|
|
and obscure way to handle events that require stricter coordination. There are
|
|
no API stability guarantees made. Not following the protocol exactly can make
|
|
the player freeze randomly. Basically, nobody should use this API.
|
|
|
|
The C API is described in the header files. The Lua API is described in the
|
|
Lua section.
|
|
|
|
The following hooks are currently defined:
|
|
|
|
``on_load``
|
|
Called when a file is to be opened, before anything is actually done.
|
|
For example, you could read and write the ``stream-open-filename``
|
|
property to redirect an URL to something else (consider support for
|
|
streaming sites which rarely give the user a direct media URL), or
|
|
you could set per-file options with by setting the property
|
|
``file-local-options/<option name>``. The player will wait until all
|
|
hooks are run.
|
|
|
|
``on_load_fail``
|
|
Called after after a file has been opened, but failed to. This can be
|
|
used to provide a fallback in case native demuxers failed to recognize
|
|
the file, instead of always running before the native demuxers like
|
|
``on_load``. Demux will only be retried if ``stream-open-filename``
|
|
was changed.
|
|
|
|
``on_preloaded``
|
|
Called after a file has been opened, and before tracks are selected and
|
|
decoders are created. This has some usefulness if an API users wants
|
|
to select tracks manually, based on the set of available tracks. It's
|
|
also useful to initialize ``--lavfi-complex`` in a specific way by API,
|
|
without having to "probe" the available streams at first.
|
|
|
|
Note that this does not yet apply default track selection. Which operations
|
|
exactly can be done and not be done, and what information is available and
|
|
what is not yet available yet, is all subject to change.
|
|
|
|
``on_unload``
|
|
Run before closing a file, and before actually uninitializing
|
|
everything. It's not possible to resume playback in this state.
|
|
|
|
Legacy hook API
|
|
~~~~~~~~~~~~~~~
|
|
|
|
.. warning::
|
|
|
|
The legacy API is deprecated and will be removed soon.
|
|
|
|
There are two special commands involved. Also, the client must listen for
|
|
client messages (``MPV_EVENT_CLIENT_MESSAGE`` in the C API).
|
|
|
|
``hook-add <hook-name> <id> <priority>``
|
|
Subscribe to the hook identified by the first argument (basically, the
|
|
name of event). The ``id`` argument is an arbitrary integer chosen by the
|
|
user. ``priority`` is used to sort all hook handlers globally across all
|
|
clients. Each client can register multiple hook handlers (even for the
|
|
same hook-name). Once the hook is registered, it cannot be unregistered.
|
|
|
|
When a specific event happens, all registered handlers are run serially.
|
|
This uses a protocol every client has to follow explicitly. When a hook
|
|
handler is run, a client message (``MPV_EVENT_CLIENT_MESSAGE``) is sent to
|
|
the client which registered the hook. This message has the following
|
|
arguments:
|
|
|
|
1. the string ``hook_run``
|
|
2. the ``id`` argument the hook was registered with as string (this can be
|
|
used to correctly handle multiple hooks registered by the same client,
|
|
as long as the ``id`` argument is unique in the client)
|
|
3. something undefined, used by the hook mechanism to track hook execution
|
|
|
|
Upon receiving this message, the client can handle the event. While doing
|
|
this, the player core will still react to requests, but playback will
|
|
typically be stopped.
|
|
|
|
When the client is done, it must continue the core's hook execution by
|
|
running the ``hook-ack`` command.
|
|
|
|
``hook-ack <string>``
|
|
Run the next hook in the global chain of hooks. The argument is the 3rd
|
|
argument of the client message that starts hook execution for the
|
|
current client.
|
|
|
|
Input Command Prefixes
|
|
----------------------
|
|
|
|
These prefixes are placed between key name and the actual command. Multiple
|
|
prefixes can be specified. They are separated by whitespace.
|
|
|
|
``osd-auto``
|
|
Use the default behavior for this command. This is the default for
|
|
``input.conf`` commands. Some libmpv/scripting/IPC APIs do not use this as
|
|
default, but use ``no-osd`` instead.
|
|
``no-osd``
|
|
Do not use any OSD for this command.
|
|
``osd-bar``
|
|
If possible, show a bar with this command. Seek commands will show the
|
|
progress bar, property changing commands may show the newly set value.
|
|
``osd-msg``
|
|
If possible, show an OSD message with this command. Seek command show
|
|
the current playback time, property changing commands show the newly set
|
|
value as text.
|
|
``osd-msg-bar``
|
|
Combine osd-bar and osd-msg.
|
|
``raw``
|
|
Do not expand properties in string arguments. (Like ``"${property-name}"``.)
|
|
This is the default for some libmpv/scripting/IPC APIs.
|
|
``expand-properties``
|
|
All string arguments are expanded as described in `Property Expansion`_.
|
|
This is the default for ``input.conf`` commands.
|
|
``repeatable``
|
|
For some commands, keeping a key pressed doesn't run the command repeatedly.
|
|
This prefix forces enabling key repeat in any case.
|
|
``async``
|
|
Allow asynchronous execution (if possible). Note that only a few commands
|
|
will support this (usually this is explicitly documented). Some commands
|
|
are asynchronous by default (or rather, their effects might manifest
|
|
after completion of the command). The semantics of this flag might change
|
|
in the future. Set it only if you don't rely on the effects of this command
|
|
being fully realized when it returns. See `Synchronous vs. Asynchronous`_.
|
|
``sync``
|
|
Allow synchronous execution (if possible). Normally, all commands are
|
|
synchronous by default, but some are asynchronous by default for
|
|
compatibility with older behavior.
|
|
|
|
All of the osd prefixes are still overridden by the global ``--osd-level``
|
|
settings.
|
|
|
|
Synchronous vs. Asynchronous
|
|
----------------------------
|
|
|
|
The ``async`` and ``sync`` prefix matter only for how the issuer of the command
|
|
waits on the completion of the command. Normally it does not affect how the
|
|
command behaves by itself. There are the following cases:
|
|
|
|
- Normal input.conf commands are always run asynchronously. Slow running
|
|
commands are queued up or run in parallel.
|
|
- "Multi" input.conf commands (1 key binding, concatenated with ``;``) will be
|
|
executed in order, except for commands that are async (either prefixed with
|
|
``async``, or async by default for some commands). The async commands are
|
|
run in a detached manner, possibly in parallel to the remaining sync commands
|
|
in the list.
|
|
- Normal Lua and libmpv commands (e.g. ``mpv_command()``) are run in a blocking
|
|
manner, unless the ``async`` prefix is used, or the command is async by
|
|
default. This means in the sync case the caller will block, even if the core
|
|
continues playback. Async mode runs the command in a detached manner.
|
|
- Async libmpv command API (e.g. ``mpv_command_async()``) never blocks the
|
|
caller, and always notify their completion with a message. The ``sync`` and
|
|
``async`` prefixes make no difference.
|
|
- Lua also provides APIs for running async commands, which behave similar to the
|
|
C counterparts.
|
|
- In all cases, async mode can still run commands in a synchronous manner, even
|
|
in detached mode. This can for example happen in cases when a command does not
|
|
have an asynchronous implementation. The async libmpv API still never blocks
|
|
the caller in these cases.
|
|
|
|
Before mpv 0.29.0, the ``async`` prefix was only used by screenshot commands,
|
|
and made them run the file saving code in a detached manner. This is the
|
|
default now, and ``async`` changes behavior only in the ways mentioned above.
|
|
|
|
Currently the following commands have different waiting characteristics with
|
|
sync vs. async: sub-add, audio-add, sub-reload, audio-reload,
|
|
rescan-external-files, screenshot, screenshot-to-file, dump-cache,
|
|
ab-loop-dump-cache.
|
|
|
|
Asynchronous command details
|
|
----------------------------
|
|
|
|
On the API level, every asynchronous command is bound to the context which
|
|
started it. For example, an asynchronous command started by ``mpv_command_async``
|
|
is bound to the ``mpv_handle`` passed to the function. Only this ``mpv_handle``
|
|
receives the completion notification (``MPV_EVENT_COMMAND_REPLY``), and only
|
|
this handle can abort a still running command directly. If the ``mpv_handle`` is
|
|
destroyed, any still running async. commands started by it are terminated.
|
|
|
|
The scripting APIs and JSON IPC give each script/connection its own implicit
|
|
``mpv_handle``.
|
|
|
|
If the player is closed, the core may abort all pending async. commands on its
|
|
own (like a forced ``mpv_abort_async_command()`` call for each pending command
|
|
on behalf of the API user). This happens at the same time ``MPV_EVENT_SHUTDOWN``
|
|
is sent, and there is no way to prevent this.
|
|
|
|
Input Sections
|
|
--------------
|
|
|
|
Input sections group a set of bindings, and enable or disable them at once.
|
|
In ``input.conf``, each key binding is assigned to an input section, rather
|
|
than actually having explicit text sections.
|
|
|
|
See also: ``enable-section`` and ``disable-section`` commands.
|
|
|
|
Predefined bindings:
|
|
|
|
``default``
|
|
Bindings without input section are implicitly assigned to this section. It
|
|
is enabled by default during normal playback.
|
|
``encode``
|
|
Section which is active in encoding mode. It is enabled exclusively, so
|
|
that bindings in the ``default`` sections are ignored.
|
|
|
|
Properties
|
|
----------
|
|
|
|
Properties are used to set mpv options during runtime, or to query arbitrary
|
|
information. They can be manipulated with the ``set``/``add``/``cycle``
|
|
commands, and retrieved with ``show-text``, or anything else that uses property
|
|
expansion. (See `Property Expansion`_.)
|
|
|
|
The property name is annotated with RW to indicate whether the property is
|
|
generally writable.
|
|
|
|
If an option is referenced, the property will normally take/return exactly the
|
|
same values as the option. In these cases, properties are merely a way to change
|
|
an option at runtime.
|
|
|
|
Property list
|
|
-------------
|
|
|
|
.. note::
|
|
|
|
Most options can be set as runtime via properties as well. Just remove the
|
|
leading ``--`` from the option name. These are not documented. Only
|
|
properties which do not exist as option with the same name, or which have
|
|
very different behavior from the options are documented below.
|
|
|
|
``audio-speed-correction``, ``video-speed-correction``
|
|
Factor multiplied with ``speed`` at which the player attempts to play the
|
|
file. Usually it's exactly 1. (Display sync mode will make this useful.)
|
|
|
|
OSD formatting will display it in the form of ``+1.23456%``, with the number
|
|
being ``(raw - 1) * 100`` for the given raw property value.
|
|
|
|
``display-sync-active``
|
|
Return whether ``--video-sync=display`` is actually active.
|
|
|
|
``filename``
|
|
Currently played file, with path stripped. If this is an URL, try to undo
|
|
percent encoding as well. (The result is not necessarily correct, but
|
|
looks better for display purposes. Use the ``path`` property to get an
|
|
unmodified filename.)
|
|
|
|
This has a sub-property:
|
|
|
|
``filename/no-ext``
|
|
Like the ``filename`` property, but if the text contains a ``.``, strip
|
|
all text after the last ``.``. Usually this removes the file extension.
|
|
|
|
``file-size``
|
|
Length in bytes of the source file/stream. (This is the same as
|
|
``${stream-end}``. For segmented/multi-part files, this will return the
|
|
size of the main or manifest file, whatever it is.)
|
|
|
|
``estimated-frame-count``
|
|
Total number of frames in current file.
|
|
|
|
.. note:: This is only an estimate. (It's computed from two unreliable
|
|
quantities: fps and stream length.)
|
|
|
|
``estimated-frame-number``
|
|
Number of current frame in current stream.
|
|
|
|
.. note:: This is only an estimate. (It's computed from two unreliable
|
|
quantities: fps and possibly rounded timestamps.)
|
|
|
|
``path``
|
|
Full path of the currently played file. Usually this is exactly the same
|
|
string you pass on the mpv command line or the ``loadfile`` command, even
|
|
if it's a relative path. If you expect an absolute path, you will have to
|
|
determine it yourself, for example by using the ``working-directory``
|
|
property.
|
|
|
|
``stream-open-filename``
|
|
The full path to the currently played media. This is different only from
|
|
``path`` in special cases. In particular, if ``--ytdl=yes`` is used, and
|
|
the URL is detected by ``youtube-dl``, then the script will set this
|
|
property to the actual media URL. This property should be set only during
|
|
the ``on_load`` or ``on_load_fail`` hooks, otherwise it will have no effect
|
|
(or may do something implementation defined in the future). The property is
|
|
reset if playback of the current media ends.
|
|
|
|
``media-title``
|
|
If the currently played file has a ``title`` tag, use that.
|
|
|
|
Otherwise, return the ``filename`` property.
|
|
|
|
``file-format``
|
|
Symbolic name of the file format. In some cases, this is a comma-separated
|
|
list of format names, e.g. mp4 is ``mov,mp4,m4a,3gp,3g2,mj2`` (the list
|
|
may grow in the future for any format).
|
|
|
|
``current-demuxer``
|
|
Name of the current demuxer. (This is useless.)
|
|
|
|
(Renamed from ``demuxer``.)
|
|
|
|
``stream-path``
|
|
Filename (full path) of the stream layer filename. (This is probably
|
|
useless and is almost never different from ``path``.)
|
|
|
|
``stream-pos``
|
|
Raw byte position in source stream. Technically, this returns the position
|
|
of the most recent packet passed to a decoder.
|
|
|
|
``stream-end``
|
|
Raw end position in bytes in source stream.
|
|
|
|
``duration``
|
|
Duration of the current file in seconds. If the duration is unknown, the
|
|
property is unavailable. Note that the file duration is not always exactly
|
|
known, so this is an estimate.
|
|
|
|
This replaces the ``length`` property, which was deprecated after the
|
|
mpv 0.9 release. (The semantics are the same.)
|
|
|
|
``avsync``
|
|
Last A/V synchronization difference. Unavailable if audio or video is
|
|
disabled.
|
|
|
|
``total-avsync-change``
|
|
Total A-V sync correction done. Unavailable if audio or video is
|
|
disabled.
|
|
|
|
``decoder-frame-drop-count``
|
|
Video frames dropped by decoder, because video is too far behind audio (when
|
|
using ``--framedrop=decoder``). Sometimes, this may be incremented in other
|
|
situations, e.g. when video packets are damaged, or the decoder doesn't
|
|
follow the usual rules. Unavailable if video is disabled.
|
|
|
|
``drop-frame-count`` is a deprecated alias.
|
|
|
|
``frame-drop-count``
|
|
Frames dropped by VO (when using ``--framedrop=vo``).
|
|
|
|
``vo-drop-frame-count`` is a deprecated alias.
|
|
|
|
``mistimed-frame-count``
|
|
Number of video frames that were not timed correctly in display-sync mode
|
|
for the sake of keeping A/V sync. This does not include external
|
|
circumstances, such as video rendering being too slow or the graphics
|
|
driver somehow skipping a vsync. It does not include rounding errors either
|
|
(which can happen especially with bad source timestamps). For example,
|
|
using the ``display-desync`` mode should never change this value from 0.
|
|
|
|
``vsync-ratio``
|
|
For how many vsyncs a frame is displayed on average. This is available if
|
|
display-sync is active only. For 30 FPS video on a 60 Hz screen, this will
|
|
be 2. This is the moving average of what actually has been scheduled, so
|
|
24 FPS on 60 Hz will never remain exactly on 2.5, but jitter depending on
|
|
the last frame displayed.
|
|
|
|
``vo-delayed-frame-count``
|
|
Estimated number of frames delayed due to external circumstances in
|
|
display-sync mode. Note that in general, mpv has to guess that this is
|
|
happening, and the guess can be inaccurate.
|
|
|
|
``percent-pos`` (RW)
|
|
Position in current file (0-100). The advantage over using this instead of
|
|
calculating it out of other properties is that it properly falls back to
|
|
estimating the playback position from the byte position, if the file
|
|
duration is not known.
|
|
|
|
``time-pos`` (RW)
|
|
Position in current file in seconds.
|
|
|
|
``time-start``
|
|
Deprecated. Always returns 0. Before mpv 0.14, this used to return the start
|
|
time of the file (could affect e.g. transport streams). See
|
|
``--rebase-start-time`` option.
|
|
|
|
``time-remaining``
|
|
Remaining length of the file in seconds. Note that the file duration is not
|
|
always exactly known, so this is an estimate.
|
|
|
|
``audio-pts`` (R)
|
|
Current audio playback position in current file in seconds. Unlike time-pos,
|
|
this updates more often than once per frame. For audio-only files, it is
|
|
mostly equivalent to time-pos, while for video-only files this property is
|
|
not available.
|
|
|
|
``playtime-remaining``
|
|
``time-remaining`` scaled by the current ``speed``.
|
|
|
|
``playback-time`` (RW)
|
|
Position in current file in seconds. Unlike ``time-pos``, the time is
|
|
clamped to the range of the file. (Inaccurate file durations etc. could
|
|
make it go out of range. Useful on attempts to seek outside of the file,
|
|
as the seek target time is considered the current position during seeking.)
|
|
|
|
``chapter`` (RW)
|
|
Current chapter number. The number of the first chapter is 0.
|
|
|
|
``edition`` (RW)
|
|
Current MKV edition number. Setting this property to a different value will
|
|
restart playback. The number of the first edition is 0.
|
|
|
|
Before mpv 0.31.0, this showed the actual edition selected at runtime, if
|
|
you didn't set the option or property manually. With mpv 0.31.0 and later,
|
|
this strictly returns the user-set option or property value, and the
|
|
``current-edition`` property was added to return the runtime selected
|
|
edition (this matters with ``--edition=auto``, the default).
|
|
|
|
``current-edition``
|
|
Currently selected edition. This property is unavailable if no file is
|
|
loaded, or the file has no editions. (Matroska files make a difference
|
|
between having no editions and a single edition, which will be reflected by
|
|
the property, although in practice it does not matter.)
|
|
|
|
``chapters``
|
|
Number of chapters.
|
|
|
|
``editions``
|
|
Number of MKV editions.
|
|
|
|
``edition-list``
|
|
List of editions, current entry marked. Currently, the raw property value
|
|
is useless.
|
|
|
|
This has a number of sub-properties. Replace ``N`` with the 0-based edition
|
|
index.
|
|
|
|
``edition-list/count``
|
|
Number of editions. If there are no editions, this can be 0 or 1 (1
|
|
if there's a useless dummy edition).
|
|
|
|
``edition-list/N/id``
|
|
Edition ID as integer. Use this to set the ``edition`` property.
|
|
Currently, this is the same as the edition index.
|
|
|
|
``edition-list/N/default``
|
|
``yes`` if this is the default edition, ``no`` otherwise.
|
|
|
|
``edition-list/N/title``
|
|
Edition title as stored in the file. Not always available.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP (for each edition)
|
|
"id" MPV_FORMAT_INT64
|
|
"title" MPV_FORMAT_STRING
|
|
"default" MPV_FORMAT_FLAG
|
|
|
|
``metadata``
|
|
Metadata key/value pairs.
|
|
|
|
If the property is accessed with Lua's ``mp.get_property_native``, this
|
|
returns a table with metadata keys mapping to metadata values. If it is
|
|
accessed with the client API, this returns a ``MPV_FORMAT_NODE_MAP``,
|
|
with tag keys mapping to tag values.
|
|
|
|
For OSD, it returns a formatted list. Trying to retrieve this property as
|
|
a raw string doesn't work.
|
|
|
|
This has a number of sub-properties:
|
|
|
|
``metadata/by-key/<key>``
|
|
Value of metadata entry ``<key>``.
|
|
|
|
``metadata/list/count``
|
|
Number of metadata entries.
|
|
|
|
``metadata/list/N/key``
|
|
Key name of the Nth metadata entry. (The first entry is ``0``).
|
|
|
|
``metadata/list/N/value``
|
|
Value of the Nth metadata entry.
|
|
|
|
``metadata/<key>``
|
|
Old version of ``metadata/by-key/<key>``. Use is discouraged, because
|
|
the metadata key string could conflict with other sub-properties.
|
|
|
|
The layout of this property might be subject to change. Suggestions are
|
|
welcome how exactly this property should work.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_MAP
|
|
(key and string value for each metadata entry)
|
|
|
|
``filtered-metadata``
|
|
Like ``metadata``, but includes only fields listed in the ``--display-tags``
|
|
option. This is the same set of tags that is printed to the terminal.
|
|
|
|
``chapter-metadata``
|
|
Metadata of current chapter. Works similar to ``metadata`` property. It
|
|
also allows the same access methods (using sub-properties).
|
|
|
|
Per-chapter metadata is very rare. Usually, only the chapter name
|
|
(``title``) is set.
|
|
|
|
For accessing other information, like chapter start, see the
|
|
``chapter-list`` property.
|
|
|
|
``vf-metadata/<filter-label>``
|
|
Metadata added by video filters. Accessed by the filter label,
|
|
which, if not explicitly specified using the ``@filter-label:`` syntax,
|
|
will be ``<filter-name>NN``.
|
|
|
|
Works similar to ``metadata`` property. It allows the same access
|
|
methods (using sub-properties).
|
|
|
|
An example of this kind of metadata are the cropping parameters
|
|
added by ``--vf=lavfi=cropdetect``.
|
|
|
|
``af-metadata/<filter-label>``
|
|
Equivalent to ``vf-metadata/<filter-label>``, but for audio filters.
|
|
|
|
``idle-active``
|
|
Return ``yes`` if no file is loaded, but the player is staying around
|
|
because of the ``--idle`` option.
|
|
|
|
(Renamed from ``idle``.)
|
|
|
|
``core-idle``
|
|
Return ``yes`` if the playback core is paused, otherwise ``no``. This can
|
|
be different ``pause`` in special situations, such as when the player
|
|
pauses itself due to low network cache.
|
|
|
|
This also returns ``yes`` if playback is restarting or if nothing is
|
|
playing at all. In other words, it's only ``no`` if there's actually
|
|
video playing. (Behavior since mpv 0.7.0.)
|
|
|
|
``cache-speed`` (R)
|
|
Current I/O read speed between the cache and the lower layer (like network).
|
|
This gives the number bytes per seconds over a 1 second window (using
|
|
the type ``MPV_FORMAT_INT64`` for the client API).
|
|
|
|
``demuxer-cache-duration``
|
|
Approximate duration of video buffered in the demuxer, in seconds. The
|
|
guess is very unreliable, and often the property will not be available
|
|
at all, even if data is buffered.
|
|
|
|
``demuxer-cache-time``
|
|
Approximate time of video buffered in the demuxer, in seconds. Same as
|
|
``demuxer-cache-duration`` but returns the last timestamp of buffered
|
|
data in demuxer.
|
|
|
|
``demuxer-cache-idle``
|
|
Returns ``yes`` if the demuxer is idle, which means the demuxer cache is
|
|
filled to the requested amount, and is currently not reading more data.
|
|
|
|
``demuxer-cache-state``
|
|
Various undocumented or half-documented things.
|
|
|
|
Each entry in ``seekable-ranges`` represents a region in the demuxer cache
|
|
that can be seeked to. If there are multiple demuxers active, this only
|
|
returns information about the "main" demuxer, but might be changed in
|
|
future to return unified information about all demuxers. The ranges are in
|
|
arbitrary order. Often, ranges will overlap for a bit, before being joined.
|
|
In broken corner cases, ranges may overlap all over the place.
|
|
|
|
The end of a seek range is usually smaller than the value returned by the
|
|
``demuxer-cache-time`` property, because that property returns the guessed
|
|
buffering amount, while the seek ranges represent the buffered data that
|
|
can actually be used for cached seeking.
|
|
|
|
``bof-cached`` indicates whether the seek range with the lowest timestamp
|
|
points to the beginning of the stream (BOF). This implies you cannot seek
|
|
before this position at all. ``eof-cached`` indicates whether the seek range
|
|
with the highest timestamp points to the end of the stream (EOF). If both
|
|
``bof-cached`` and ``eof-cached`` are set to ``yes``, and there's only 1
|
|
cache range, the entire stream is cached.
|
|
|
|
``fw-bytes`` is the number of bytes of packets buffered in the range
|
|
starting from the current decoding position. This is a rough estimate
|
|
(may not account correctly for various overhead), and stops at the
|
|
demuxer position (it ignores seek ranges after it).
|
|
|
|
``file-cache-bytes`` is the number of bytes stored in the file cache. This
|
|
includes all overhead, and possibly unused data (like pruned data). This
|
|
member is missing if the file cache is not active.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_MAP
|
|
"seekable-ranges" MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP
|
|
"start" MPV_FORMAT_DOUBLE
|
|
"end" MPV_FORMAT_DOUBLE
|
|
"bof-cached" MPV_FORMAT_FLAG
|
|
"eof-cached" MPV_FORMAT_FLAG
|
|
"fw-bytes" MPV_FORMAT_INT64
|
|
"file-cache-bytes" MPV_FORMAT_INT64
|
|
|
|
Other fields (might be changed or removed in the future):
|
|
|
|
``eof``
|
|
True if the reader thread has hit the end of the file.
|
|
|
|
``underrun``
|
|
True if the reader thread could not satisfy a decoder's request for a
|
|
new packet.
|
|
|
|
``idle``
|
|
True if the thread is currently not reading.
|
|
|
|
``total-bytes``
|
|
Sum of packet bytes (plus some overhead estimation) of the entire packet
|
|
queue, including cached seekable ranges.
|
|
|
|
``demuxer-via-network``
|
|
Returns ``yes`` if the stream demuxed via the main demuxer is most likely
|
|
played via network. What constitutes "network" is not always clear, might
|
|
be used for other types of untrusted streams, could be wrong in certain
|
|
cases, and its definition might be changing. Also, external files (like
|
|
separate audio files or streams) do not influence the value of this
|
|
property (currently).
|
|
|
|
``demuxer-start-time`` (R)
|
|
Returns the start time reported by the demuxer in fractional seconds.
|
|
|
|
``paused-for-cache``
|
|
Returns ``yes`` when playback is paused because of waiting for the cache.
|
|
|
|
``cache-buffering-state``
|
|
Return the percentage (0-100) of the cache fill status until the player
|
|
will unpause (related to ``paused-for-cache``).
|
|
|
|
``eof-reached``
|
|
Returns ``yes`` if end of playback was reached, ``no`` otherwise. Note
|
|
that this is usually interesting only if ``--keep-open`` is enabled,
|
|
since otherwise the player will immediately play the next file (or exit
|
|
or enter idle mode), and in these cases the ``eof-reached`` property will
|
|
logically be cleared immediately after it's set.
|
|
|
|
``seeking``
|
|
Returns ``yes`` if the player is currently seeking, or otherwise trying
|
|
to restart playback. (It's possible that it returns ``yes`` while a file
|
|
is loaded. This is because the same underlying code is used for seeking and
|
|
resyncing.)
|
|
|
|
``mixer-active``
|
|
Return ``yes`` if the audio mixer is active, ``no`` otherwise.
|
|
|
|
This option is relatively useless. Before mpv 0.18.1, it could be used to
|
|
infer behavior of the ``volume`` property.
|
|
|
|
``ao-volume`` (RW)
|
|
System volume. This property is available only if mpv audio output is
|
|
currently active, and only if the underlying implementation supports volume
|
|
control. What this option does depends on the API. For example, on ALSA
|
|
this usually changes system-wide audio, while with PulseAudio this controls
|
|
per-application volume.
|
|
|
|
``ao-mute`` (RW)
|
|
Similar to ``ao-volume``, but controls the mute state. May be unimplemented
|
|
even if ``ao-volume`` works.
|
|
|
|
``audio-codec``
|
|
Audio codec selected for decoding.
|
|
|
|
``audio-codec-name``
|
|
Audio codec.
|
|
|
|
``audio-params``
|
|
Audio format as output by the audio decoder.
|
|
This has a number of sub-properties:
|
|
|
|
``audio-params/format``
|
|
The sample format as string. This uses the same names as used in other
|
|
places of mpv.
|
|
|
|
``audio-params/samplerate``
|
|
Samplerate.
|
|
|
|
``audio-params/channels``
|
|
The channel layout as a string. This is similar to what the
|
|
``--audio-channels`` accepts.
|
|
|
|
``audio-params/hr-channels``
|
|
As ``channels``, but instead of the possibly cryptic actual layout
|
|
sent to the audio device, return a hopefully more human readable form.
|
|
(Usually only ``audio-out-params/hr-channels`` makes sense.)
|
|
|
|
``audio-params/channel-count``
|
|
Number of audio channels. This is redundant to the ``channels`` field
|
|
described above.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_MAP
|
|
"format" MPV_FORMAT_STRING
|
|
"samplerate" MPV_FORMAT_INT64
|
|
"channels" MPV_FORMAT_STRING
|
|
"channel-count" MPV_FORMAT_INT64
|
|
"hr-channels" MPV_FORMAT_STRING
|
|
|
|
``audio-out-params``
|
|
Same as ``audio-params``, but the format of the data written to the audio
|
|
API.
|
|
|
|
``colormatrix`` (R)
|
|
Redirects to ``video-params/colormatrix``. This parameter (as well as
|
|
similar ones) can be overridden with the ``format`` video filter.
|
|
|
|
``colormatrix-input-range`` (R)
|
|
See ``colormatrix``.
|
|
|
|
``colormatrix-primaries`` (R)
|
|
See ``colormatrix``.
|
|
|
|
``hwdec`` (RW)
|
|
Reflects the ``--hwdec`` option.
|
|
|
|
Writing to it may change the currently used hardware decoder, if possible.
|
|
(Internally, the player may reinitialize the decoder, and will perform a
|
|
seek to refresh the video properly.) You can watch the other hwdec
|
|
properties to see whether this was successful.
|
|
|
|
Unlike in mpv 0.9.x and before, this does not return the currently active
|
|
hardware decoder. Since mpv 0.18.0, ``hwdec-current`` is available for
|
|
this purpose.
|
|
|
|
``hwdec-current``
|
|
Return the current hardware decoding in use. If decoding is active, return
|
|
one of the values used by the ``hwdec`` option/property. ``no`` indicates
|
|
software decoding. If no decoder is loaded, the property is unavailable.
|
|
|
|
``hwdec-interop``
|
|
This returns the currently loaded hardware decoding/output interop driver.
|
|
This is known only once the VO has opened (and possibly later). With some
|
|
VOs (like ``gpu``), this might be never known in advance, but only when
|
|
the decoder attempted to create the hw decoder successfully. (Using
|
|
``--gpu-hwdec-interop`` can load it eagerly.) If there are multiple
|
|
drivers loaded, they will be separated by ``,``.
|
|
|
|
If no VO is active or no interop driver is known, this property is
|
|
unavailable.
|
|
|
|
This does not necessarily use the same values as ``hwdec``. There can be
|
|
multiple interop drivers for the same hardware decoder, depending on
|
|
platform and VO.
|
|
|
|
``video-format``
|
|
Video format as string.
|
|
|
|
``video-codec``
|
|
Video codec selected for decoding.
|
|
|
|
``width``, ``height``
|
|
Video size. This uses the size of the video as decoded, or if no video
|
|
frame has been decoded yet, the (possibly incorrect) container indicated
|
|
size.
|
|
|
|
``video-params``
|
|
Video parameters, as output by the decoder (with overrides like aspect
|
|
etc. applied). This has a number of sub-properties:
|
|
|
|
``video-params/pixelformat``
|
|
The pixel format as string. This uses the same names as used in other
|
|
places of mpv.
|
|
|
|
``video-params/average-bpp``
|
|
Average bits-per-pixel as integer. Subsampled planar formats use a
|
|
different resolution, which is the reason this value can sometimes be
|
|
odd or confusing. Can be unavailable with some formats.
|
|
|
|
``video-params/plane-depth``
|
|
Bit depth for each color component as integer. This is only exposed
|
|
for planar or single-component formats, and is unavailable for other
|
|
formats.
|
|
|
|
``video-params/w``, ``video-params/h``
|
|
Video size as integers, with no aspect correction applied.
|
|
|
|
``video-params/dw``, ``video-params/dh``
|
|
Video size as integers, scaled for correct aspect ratio.
|
|
|
|
``video-params/aspect``
|
|
Display aspect ratio as float.
|
|
|
|
``video-params/par``
|
|
Pixel aspect ratio.
|
|
|
|
``video-params/colormatrix``
|
|
The colormatrix in use as string. (Exact values subject to change.)
|
|
|
|
``video-params/colorlevels``
|
|
The colorlevels as string. (Exact values subject to change.)
|
|
|
|
``video-params/primaries``
|
|
The primaries in use as string. (Exact values subject to change.)
|
|
|
|
``video-params/gamma``
|
|
The gamma function in use as string. (Exact values subject to change.)
|
|
|
|
``video-params/sig-peak``
|
|
The video file's tagged signal peak as float.
|
|
|
|
``video-params/light``
|
|
The light type in use as a string. (Exact values subject to change.)
|
|
|
|
``video-params/chroma-location``
|
|
Chroma location as string. (Exact values subject to change.)
|
|
|
|
``video-params/rotate``
|
|
Intended display rotation in degrees (clockwise).
|
|
|
|
``video-params/stereo-in``
|
|
Source file stereo 3D mode. (See the ``format`` video filter's
|
|
``stereo-in`` option.)
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_MAP
|
|
"pixelformat" MPV_FORMAT_STRING
|
|
"w" MPV_FORMAT_INT64
|
|
"h" MPV_FORMAT_INT64
|
|
"dw" MPV_FORMAT_INT64
|
|
"dh" MPV_FORMAT_INT64
|
|
"aspect" MPV_FORMAT_DOUBLE
|
|
"par" MPV_FORMAT_DOUBLE
|
|
"colormatrix" MPV_FORMAT_STRING
|
|
"colorlevels" MPV_FORMAT_STRING
|
|
"primaries" MPV_FORMAT_STRING
|
|
"gamma" MPV_FORMAT_STRING
|
|
"sig-peak" MPV_FORMAT_DOUBLE
|
|
"light" MPV_FORMAT_STRING
|
|
"chroma-location" MPV_FORMAT_STRING
|
|
"rotate" MPV_FORMAT_INT64
|
|
"stereo-in" MPV_FORMAT_STRING
|
|
|
|
``dwidth``, ``dheight``
|
|
Video display size. This is the video size after filters and aspect scaling
|
|
have been applied. The actual video window size can still be different
|
|
from this, e.g. if the user resized the video window manually.
|
|
|
|
These have the same values as ``video-out-params/dw`` and
|
|
``video-out-params/dh``.
|
|
|
|
``video-dec-params``
|
|
Exactly like ``video-params``, but no overrides applied.
|
|
|
|
``video-out-params``
|
|
Same as ``video-params``, but after video filters have been applied. If
|
|
there are no video filters in use, this will contain the same values as
|
|
``video-params``. Note that this is still not necessarily what the video
|
|
window uses, since the user can change the window size, and all real VOs
|
|
do their own scaling independently from the filter chain.
|
|
|
|
Has the same sub-properties as ``video-params``.
|
|
|
|
``video-frame-info``
|
|
Approximate information of the current frame. Note that if any of these
|
|
are used on OSD, the information might be off by a few frames due to OSD
|
|
redrawing and frame display being somewhat disconnected, and you might
|
|
have to pause and force a redraw.
|
|
|
|
Sub-properties::
|
|
|
|
video-frame-info/picture-type
|
|
video-frame-info/interlaced
|
|
video-frame-info/tff
|
|
video-frame-info/repeat
|
|
|
|
``container-fps``
|
|
Container FPS. This can easily contain bogus values. For videos that use
|
|
modern container formats or video codecs, this will often be incorrect.
|
|
|
|
(Renamed from ``fps``.)
|
|
|
|
``estimated-vf-fps``
|
|
Estimated/measured FPS of the video filter chain output. (If no filters
|
|
are used, this corresponds to decoder output.) This uses the average of
|
|
the 10 past frame durations to calculate the FPS. It will be inaccurate
|
|
if frame-dropping is involved (such as when framedrop is explicitly
|
|
enabled, or after precise seeking). Files with imprecise timestamps (such
|
|
as Matroska) might lead to unstable results.
|
|
|
|
``window-scale`` (RW)
|
|
Window size multiplier. Setting this will resize the video window to the
|
|
values contained in ``dwidth`` and ``dheight`` multiplied with the value
|
|
set with this property. Setting ``1`` will resize to original video size
|
|
(or to be exact, the size the video filters output). ``2`` will set the
|
|
double size, ``0.5`` halves the size.
|
|
|
|
See ``current-window-scale`` for the value derived from the actual window
|
|
size.
|
|
|
|
Since mpv 0.31.0, this always returns the previously set value (or the
|
|
default value), instead of the value implied by the actual window size.
|
|
Before mpv 0.31.0, this returned what ``current-window-scale`` returns now,
|
|
after the window was created.
|
|
|
|
``current-window-scale``
|
|
The ``window-scale`` value calculated from the current window size. This
|
|
has the same value as ``window-scale`` if the window size was not changed
|
|
since setting the option, and the window size was not restricted in other
|
|
ways. The property is unavailable if no video is active.
|
|
|
|
``display-names``
|
|
Names of the displays that the mpv window covers. On X11, these
|
|
are the xrandr names (LVDS1, HDMI1, DP1, VGA1, etc.). On Windows, these
|
|
are the GDI names (\\.\DISPLAY1, \\.\DISPLAY2, etc.) and the first display
|
|
in the list will be the one that Windows considers associated with the
|
|
window (as determined by the MonitorFromWindow API.) On macOS these are the
|
|
Display Product Names as used in the System Information and only one display
|
|
name is returned since a window can only be on one screen.
|
|
|
|
``display-fps``
|
|
The refresh rate of the current display. Currently, this is the lowest FPS
|
|
of any display covered by the video, as retrieved by the underlying system
|
|
APIs (e.g. xrandr on X11). It is not the measured FPS. It's not necessarily
|
|
available on all platforms. Note that any of the listed facts may change
|
|
any time without a warning.
|
|
|
|
Writing to this property is deprecated. It has the same effect as writing to
|
|
``override-display-fps``. Since mpv 0.31.0, this property is unavailable
|
|
if no display FPS was reported (e.g. if no video is active), while in older
|
|
versions, it returned the ``--display-fps`` option value.
|
|
|
|
``estimated-display-fps``
|
|
Only available if display-sync mode (as selected by ``--video-sync``) is
|
|
active. Returns the actual rate at which display refreshes seem to occur,
|
|
measured by system time.
|
|
|
|
``vsync-jitter``
|
|
Estimated deviation factor of the vsync duration.
|
|
|
|
``display-hidpi-scale``
|
|
The HiDPI scale factor as reported by the windowing backend. If no VO is
|
|
active, or if the VO does not report a value, this property is unavailable.
|
|
It may be saner to report an absolute DPI, however, this is the way HiDPI
|
|
support is implemented on most OS APIs. See also ``--hidpi-window-scale``.
|
|
|
|
``video-aspect`` (RW)
|
|
Deprecated. This is tied to ``--video-aspect-override``, but always
|
|
reports the current video aspect if video is active.
|
|
|
|
The read and write components of this option can be split up into
|
|
``video-params/aspect`` and ``video-aspect-override`` respectively.
|
|
|
|
``osd-width``, ``osd-height``
|
|
Last known OSD width (can be 0). This is needed if you want to use the
|
|
``overlay-add`` command. It gives you the actual OSD size, which can be
|
|
different from the window size in some cases.
|
|
|
|
Alias to ``osd-dimensions/w`` and ``osd-dimensions/h``.
|
|
|
|
``osd-par``
|
|
Last known OSD display pixel aspect (can be 0).
|
|
|
|
Alias to ``osd-dimensions/osd-par``.
|
|
|
|
``osd-dimensions``
|
|
Last known OSD dimensions.
|
|
|
|
Has the following sub-properties (which can be read as ``MPV_FORMAT_NODE``
|
|
or Lua table with ``mp.get_property_native``):
|
|
|
|
``w``
|
|
Size of the VO window in OSD render units (usually pixels, but may be
|
|
scaled pixels with VOs like ``xv``).
|
|
|
|
``h``
|
|
Size of the VO window in OSD render units,
|
|
|
|
``par``
|
|
Pixel aspect ratio of the OSD (usually 1).
|
|
|
|
``aspect``
|
|
Display aspect ratio of the VO window. (Computing from the properties
|
|
above.)
|
|
|
|
``mt``, ``mb``, ``ml``, ``mr``
|
|
OSD to video margins (top, bottom, left, right). This describes the
|
|
area into which the video is rendered.
|
|
|
|
Any of these properties may be unavailable or set to dummy values if the
|
|
VO window is not created or visible.
|
|
|
|
``sub-text``
|
|
Return the current subtitle text regardless of sub visibility.
|
|
Formatting is stripped. If the subtitle is not text-based
|
|
(i.e. DVD/BD subtitles), an empty string is returned.
|
|
|
|
This property is experimental and might be removed in the future.
|
|
|
|
``sub-start``
|
|
Return the current subtitle start time (in seconds). If there's multiple
|
|
current subtitles, returns the first start time. If no current subtitle is
|
|
present null is returned instead.
|
|
|
|
``sub-end``
|
|
Return the current subtitle start time (in seconds). If there's multiple
|
|
current subtitles, return the last end time. If no current subtitle is
|
|
present, or if it's present but has unknown or incorrect duration, null
|
|
is returned instead.
|
|
|
|
``playlist-pos`` (RW)
|
|
Current position on playlist. The first entry is on position 0. Writing
|
|
to the property will restart playback at the written entry.
|
|
|
|
``playlist-pos-1`` (RW)
|
|
Same as ``playlist-pos``, but 1-based.
|
|
|
|
``playlist-count``
|
|
Number of total playlist entries.
|
|
|
|
``playlist``
|
|
Playlist, current entry marked. Currently, the raw property value is
|
|
useless.
|
|
|
|
This has a number of sub-properties. Replace ``N`` with the 0-based playlist
|
|
entry index.
|
|
|
|
``playlist/count``
|
|
Number of playlist entries (same as ``playlist-count``).
|
|
|
|
``playlist/N/filename``
|
|
Filename of the Nth entry.
|
|
|
|
``playlist/N/current``, ``playlist/N/playing``
|
|
``yes`` if this entry is currently playing (or being loaded).
|
|
Unavailable or ``no`` otherwise. When changing files, ``current`` and
|
|
``playing`` can be different, because the currently playing file hasn't
|
|
been unloaded yet; in this case, ``current`` refers to the new
|
|
selection. (Since mpv 0.7.0.)
|
|
|
|
``playlist/N/title``
|
|
Name of the Nth entry. Only available if the playlist file contains
|
|
such fields, and only if mpv's parser supports it for the given
|
|
playlist format.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP (for each playlist entry)
|
|
"filename" MPV_FORMAT_STRING
|
|
"current" MPV_FORMAT_FLAG (might be missing; since mpv 0.7.0)
|
|
"playing" MPV_FORMAT_FLAG (same)
|
|
"title" MPV_FORMAT_STRING (optional)
|
|
|
|
``track-list``
|
|
List of audio/video/sub tracks, current entry marked. Currently, the raw
|
|
property value is useless.
|
|
|
|
This has a number of sub-properties. Replace ``N`` with the 0-based track
|
|
index.
|
|
|
|
``track-list/count``
|
|
Total number of tracks.
|
|
|
|
``track-list/N/id``
|
|
The ID as it's used for ``-sid``/``--aid``/``--vid``. This is unique
|
|
within tracks of the same type (sub/audio/video), but otherwise not.
|
|
|
|
``track-list/N/type``
|
|
String describing the media type. One of ``audio``, ``video``, ``sub``.
|
|
|
|
``track-list/N/src-id``
|
|
Track ID as used in the source file. Not always available. (It is
|
|
missing if the format has no native ID, if the track is a pseudo-track
|
|
that does not exist in this way in the actual file, or if the format
|
|
is handled by libavformat, and the format was not whitelisted as having
|
|
track IDs.)
|
|
|
|
``track-list/N/title``
|
|
Track title as it is stored in the file. Not always available.
|
|
|
|
``track-list/N/lang``
|
|
Track language as identified by the file. Not always available.
|
|
|
|
``track-list/N/albumart``
|
|
``yes`` if this is a video track that consists of a single picture,
|
|
``no`` or unavailable otherwise. This is used for video tracks that are
|
|
really attached pictures in audio files.
|
|
|
|
``track-list/N/default``
|
|
``yes`` if the track has the default flag set in the file, ``no``
|
|
otherwise.
|
|
|
|
``track-list/N/forced``
|
|
``yes`` if the track has the forced flag set in the file, ``no``
|
|
otherwise.
|
|
|
|
``track-list/N/codec``
|
|
The codec name used by this track, for example ``h264``. Unavailable
|
|
in some rare cases.
|
|
|
|
``track-list/N/external``
|
|
``yes`` if the track is an external file, ``no`` otherwise. This is
|
|
set for separate subtitle files.
|
|
|
|
``track-list/N/external-filename``
|
|
The filename if the track is from an external file, unavailable
|
|
otherwise.
|
|
|
|
``track-list/N/selected``
|
|
``yes`` if the track is currently decoded, ``no`` otherwise.
|
|
|
|
``track-list/N/ff-index``
|
|
The stream index as usually used by the FFmpeg utilities. Note that
|
|
this can be potentially wrong if a demuxer other than libavformat
|
|
(``--demuxer=lavf``) is used. For mkv files, the index will usually
|
|
match even if the default (builtin) demuxer is used, but there is
|
|
no hard guarantee.
|
|
|
|
``track-list/N/decoder-desc``
|
|
If this track is being decoded, the human-readable decoder name,
|
|
|
|
``track-list/N/demux-w``, ``track-list/N/demux-h``
|
|
Video size hint as indicated by the container. (Not always accurate.)
|
|
|
|
``track-list/N/demux-channel-count``
|
|
Number of audio channels as indicated by the container. (Not always
|
|
accurate - in particular, the track could be decoded as a different
|
|
number of channels.)
|
|
|
|
``track-list/N/demux-channels``
|
|
Channel layout as indicated by the container. (Not always accurate.)
|
|
|
|
``track-list/N/demux-samplerate``
|
|
Audio sample rate as indicated by the container. (Not always accurate.)
|
|
|
|
``track-list/N/demux-fps``
|
|
Video FPS as indicated by the container. (Not always accurate.)
|
|
|
|
``track-list/N/demux-bitrate``
|
|
Audio average bitrate, in bits per second. (Not always accurate.)
|
|
|
|
``track-list/N/demux-rotation``
|
|
Video clockwise rotation metadata, in degrees.
|
|
|
|
``track-list/N/demux-par``
|
|
Pixel aspect ratio.
|
|
|
|
``track-list/N/audio-channels`` (deprecated)
|
|
Deprecated alias for ``track-list/N/demux-channel-count``.
|
|
|
|
``track-list/N/replaygain-track-peak``, ``track-list/N/replaygain-track-gain``
|
|
Per-track replaygain values. Only available for audio tracks with
|
|
corresponding information stored in the source file.
|
|
|
|
``track-list/N/replaygain-album-peak``, ``track-list/N/replaygain-album-gain``
|
|
Per-album replaygain values. If the file has per-track but no per-album
|
|
information, the per-album values will be copied from the per-track
|
|
values currently. It's possible that future mpv versions will make
|
|
these properties unavailable instead in this case.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP (for each track)
|
|
"id" MPV_FORMAT_INT64
|
|
"type" MPV_FORMAT_STRING
|
|
"src-id" MPV_FORMAT_INT64
|
|
"title" MPV_FORMAT_STRING
|
|
"lang" MPV_FORMAT_STRING
|
|
"albumart" MPV_FORMAT_FLAG
|
|
"default" MPV_FORMAT_FLAG
|
|
"forced" MPV_FORMAT_FLAG
|
|
"selected" MPV_FORMAT_FLAG
|
|
"external" MPV_FORMAT_FLAG
|
|
"external-filename" MPV_FORMAT_STRING
|
|
"codec" MPV_FORMAT_STRING
|
|
"ff-index" MPV_FORMAT_INT64
|
|
"decoder-desc" MPV_FORMAT_STRING
|
|
"demux-w" MPV_FORMAT_INT64
|
|
"demux-h" MPV_FORMAT_INT64
|
|
"demux-channel-count" MPV_FORMAT_INT64
|
|
"demux-channels" MPV_FORMAT_STRING
|
|
"demux-samplerate" MPV_FORMAT_INT64
|
|
"demux-fps" MPV_FORMAT_DOUBLE
|
|
"demux-bitrate" MPV_FORMAT_INT64
|
|
"demux-rotation" MPV_FORMAT_INT64
|
|
"demux-par" MPV_FORMAT_DOUBLE
|
|
"audio-channels" MPV_FORMAT_INT64
|
|
"replaygain-track-peak" MPV_FORMAT_DOUBLE
|
|
"replaygain-track-gain" MPV_FORMAT_DOUBLE
|
|
"replaygain-album-peak" MPV_FORMAT_DOUBLE
|
|
"replaygain-album-gain" MPV_FORMAT_DOUBLE
|
|
|
|
``chapter-list``
|
|
List of chapters, current entry marked. Currently, the raw property value
|
|
is useless.
|
|
|
|
This has a number of sub-properties. Replace ``N`` with the 0-based chapter
|
|
index.
|
|
|
|
``chapter-list/count``
|
|
Number of chapters.
|
|
|
|
``chapter-list/N/title``
|
|
Chapter title as stored in the file. Not always available.
|
|
|
|
``chapter-list/N/time``
|
|
Chapter start time in seconds as float.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP (for each chapter)
|
|
"title" MPV_FORMAT_STRING
|
|
"time" MPV_FORMAT_DOUBLE
|
|
|
|
``af``, ``vf`` (RW)
|
|
See ``--vf``/``--af`` and the ``vf``/``af`` command.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP (for each filter entry)
|
|
"name" MPV_FORMAT_STRING
|
|
"label" MPV_FORMAT_STRING [optional]
|
|
"enabled" MPV_FORMAT_FLAG [optional]
|
|
"params" MPV_FORMAT_NODE_MAP [optional]
|
|
"key" MPV_FORMAT_STRING
|
|
"value" MPV_FORMAT_STRING
|
|
|
|
It's also possible to write the property using this format.
|
|
|
|
``seekable``
|
|
Return whether it's generally possible to seek in the current file.
|
|
|
|
``partially-seekable``
|
|
Return ``yes`` if the current file is considered seekable, but only because
|
|
the cache is active. This means small relative seeks may be fine, but larger
|
|
seeks may fail anyway. Whether a seek will succeed or not is generally not
|
|
known in advance.
|
|
|
|
If this property returns true, ``seekable`` will also return true.
|
|
|
|
``playback-abort``
|
|
Return whether playback is stopped or is to be stopped. (Useful in obscure
|
|
situations like during ``on_load`` hook processing, when the user can
|
|
stop playback, but the script has to explicitly end processing.)
|
|
|
|
``cursor-autohide`` (RW)
|
|
See ``--cursor-autohide``. Setting this to a new value will always update
|
|
the cursor, and reset the internal timer.
|
|
|
|
``osd-sym-cc``
|
|
Inserts the current OSD symbol as opaque OSD control code (cc). This makes
|
|
sense only with the ``show-text`` command or options which set OSD messages.
|
|
The control code is implementation specific and is useless for anything else.
|
|
|
|
``osd-ass-cc``
|
|
``${osd-ass-cc/0}`` disables escaping ASS sequences of text in OSD,
|
|
``${osd-ass-cc/1}`` enables it again. By default, ASS sequences are
|
|
escaped to avoid accidental formatting, and this property can disable
|
|
this behavior. Note that the properties return an opaque OSD control
|
|
code, which only makes sense for the ``show-text`` command or options
|
|
which set OSD messages.
|
|
|
|
.. admonition:: Example
|
|
|
|
- ``--osd-status-msg='This is ${osd-ass-cc/0}{\\b1}bold text'``
|
|
- ``show-text "This is ${osd-ass-cc/0}{\b1}bold text"``
|
|
|
|
Any ASS override tags as understood by libass can be used.
|
|
|
|
Note that you need to escape the ``\`` character, because the string is
|
|
processed for C escape sequences before passing it to the OSD code.
|
|
|
|
A list of tags can be found here: http://docs.aegisub.org/latest/ASS_Tags/
|
|
|
|
``vo-configured``
|
|
Return whether the VO is configured right now. Usually this corresponds to
|
|
whether the video window is visible. If the ``--force-window`` option is
|
|
used, this is usually always returns ``yes``.
|
|
|
|
``vo-passes``
|
|
Contains introspection about the VO's active render passes and their
|
|
execution times. Not implemented by all VOs.
|
|
|
|
This is further subdivided into two frame types, ``vo-passes/fresh`` for
|
|
fresh frames (which have to be uploaded, scaled, etc.) and
|
|
``vo-passes/redraw`` for redrawn frames (which only have to be re-painted).
|
|
The number of passes for any given subtype can change from frame to frame,
|
|
and should not be relied upon.
|
|
|
|
Each frame type has a number of further sub-properties. Replace ``TYPE``
|
|
with the frame type, ``N`` with the 0-based pass index, and ``M`` with the
|
|
0-based sample index.
|
|
|
|
``vo-passes/TYPE/count``
|
|
Number of passes.
|
|
|
|
``vo-passes/TYPE/N/desc``
|
|
Human-friendy description of the pass.
|
|
|
|
``vo-passes/TYPE/N/last``
|
|
Last measured execution time, in nanoseconds.
|
|
|
|
``vo-passes/TYPE/N/avg``
|
|
Average execution time of this pass, in nanoseconds. The exact
|
|
timeframe varies, but it should generally be a handful of seconds.
|
|
|
|
``vo-passes/TYPE/N/peak``
|
|
The peak execution time (highest value) within this averaging range, in
|
|
nanoseconds.
|
|
|
|
``vo-passes/TYPE/N/count``
|
|
The number of samples for this pass.
|
|
|
|
``vo-passes/TYPE/N/samples/M``
|
|
The raw execution time of a specific sample for this pass, in
|
|
nanoseconds.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_MAP
|
|
"TYPE" MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP
|
|
"desc" MPV_FORMAT_STRING
|
|
"last" MPV_FORMAT_INT64
|
|
"avg" MPV_FORMAT_INT64
|
|
"peak" MPV_FORMAT_INT64
|
|
"count" MPV_FORMAT_INT64
|
|
"samples" MPV_FORMAT_NODE_ARRAY
|
|
MP_FORMAT_INT64
|
|
|
|
Note that directly accessing this structure via subkeys is not supported,
|
|
the only access is through aforementioned ``MPV_FORMAT_NODE``.
|
|
|
|
``video-bitrate``, ``audio-bitrate``, ``sub-bitrate``
|
|
Bitrate values calculated on the packet level. This works by dividing the
|
|
bit size of all packets between two keyframes by their presentation
|
|
timestamp distance. (This uses the timestamps are stored in the file, so
|
|
e.g. playback speed does not influence the returned values.) In particular,
|
|
the video bitrate will update only per keyframe, and show the "past"
|
|
bitrate. To make the property more UI friendly, updates to these properties
|
|
are throttled in a certain way.
|
|
|
|
The unit is bits per second. OSD formatting turns these values in kilobits
|
|
(or megabits, if appropriate), which can be prevented by using the
|
|
raw property value, e.g. with ``${=video-bitrate}``.
|
|
|
|
Note that the accuracy of these properties is influenced by a few factors.
|
|
If the underlying demuxer rewrites the packets on demuxing (done for some
|
|
file formats), the bitrate might be slightly off. If timestamps are bad
|
|
or jittery (like in Matroska), even constant bitrate streams might show
|
|
fluctuating bitrate.
|
|
|
|
How exactly these values are calculated might change in the future.
|
|
|
|
In earlier versions of mpv, these properties returned a static (but bad)
|
|
guess using a completely different method.
|
|
|
|
``packet-video-bitrate``, ``packet-audio-bitrate``, ``packet-sub-bitrate``
|
|
Old and deprecated properties for ``video-bitrate``, ``audio-bitrate``,
|
|
``sub-bitrate``. They behave exactly the same, but return a value in
|
|
kilobits. Also, they don't have any OSD formatting, though the same can be
|
|
achieved with e.g. ``${=video-bitrate}``.
|
|
|
|
These properties shouldn't be used anymore.
|
|
|
|
``audio-device-list``
|
|
Return the list of discovered audio devices. This is mostly for use with
|
|
the client API, and reflects what ``--audio-device=help`` with the command
|
|
line player returns.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP (for each device entry)
|
|
"name" MPV_FORMAT_STRING
|
|
"description" MPV_FORMAT_STRING
|
|
|
|
The ``name`` is what is to be passed to the ``--audio-device`` option (and
|
|
often a rather cryptic audio API-specific ID), while ``description`` is
|
|
human readable free form text. The description is set to the device name
|
|
(minus mpv-specific ``<driver>/`` prefix) if no description is available
|
|
or the description would have been an empty string.
|
|
|
|
The special entry with the name set to ``auto`` selects the default audio
|
|
output driver and the default device.
|
|
|
|
The property can be watched with the property observation mechanism in
|
|
the client API and in Lua scripts. (Technically, change notification is
|
|
enabled the first time this property is read.)
|
|
|
|
``audio-device`` (RW)
|
|
Set the audio device. This directly reads/writes the ``--audio-device``
|
|
option, but on write accesses, the audio output will be scheduled for
|
|
reloading.
|
|
|
|
Writing this property while no audio output is active will not automatically
|
|
enable audio. (This is also true in the case when audio was disabled due to
|
|
reinitialization failure after a previous write access to ``audio-device``.)
|
|
|
|
This property also doesn't tell you which audio device is actually in use.
|
|
|
|
How these details are handled may change in the future.
|
|
|
|
``current-vo``
|
|
Current video output driver (name as used with ``--vo``).
|
|
|
|
``current-ao``
|
|
Current audio output driver (name as used with ``--ao``).
|
|
|
|
``shared-script-properties`` (RW)
|
|
This is a key/value map of arbitrary strings shared between scripts for
|
|
general use. The player itself does not use any data in it (although some
|
|
builtin scripts may). The property is not preserved across player restarts.
|
|
|
|
This is very primitive, inefficient, and annoying to use. It's a makeshift
|
|
solution which could go away any time (for example, when a better solution
|
|
becomes available). This is also why this property has an annoying name. You
|
|
should avoid using it, unless you absolutely have to.
|
|
|
|
Lua scripting has helpers starting with ``utils.shared_script_property_``.
|
|
They are undocumented because you should not use this property. If you still
|
|
think you must, you should use the helpers instead of the property directly.
|
|
|
|
You are supposed to use the ``change-list`` command to modify the contents.
|
|
Reading, modifying, and writing the property manually could data loss if two
|
|
scripts update different keys at the same time due to lack of
|
|
synchronization. The Lua helpers take care of this.
|
|
|
|
(There is no way to ensure synchronization if two scripts try to update the
|
|
same key at the same time.)
|
|
|
|
``working-directory``
|
|
Return the working directory of the mpv process. Can be useful for JSON IPC
|
|
users, because the command line player usually works with relative paths.
|
|
|
|
``protocol-list``
|
|
List of protocol prefixes potentially recognized by the player. They are
|
|
returned without trailing ``://`` suffix (which is still always required).
|
|
In some cases, the protocol will not actually be supported (consider
|
|
``https`` if ffmpeg is not compiled with TLS support).
|
|
|
|
``decoder-list``
|
|
List of decoders supported. This lists decoders which can be passed to
|
|
``--vd`` and ``--ad``.
|
|
|
|
``codec``
|
|
Canonical codec name, which identifies the format the decoder can
|
|
handle.
|
|
|
|
``driver``
|
|
The name of the decoder itself. Often, this is the same as ``codec``.
|
|
Sometimes it can be different. It is used to distinguish multiple
|
|
decoders for the same codec.
|
|
|
|
``description``
|
|
Human readable description of the decoder and codec.
|
|
|
|
When querying the property with the client API using ``MPV_FORMAT_NODE``,
|
|
or with Lua ``mp.get_property_native``, this will return a mpv_node with
|
|
the following contents:
|
|
|
|
::
|
|
|
|
MPV_FORMAT_NODE_ARRAY
|
|
MPV_FORMAT_NODE_MAP (for each decoder entry)
|
|
"codec" MPV_FORMAT_STRING
|
|
"driver" MPV_FORMAT_STRING
|
|
"description" MPV_FORMAT_STRING
|
|
|
|
``encoder-list``
|
|
List of libavcodec encoders. This has the same format as ``decoder-list``.
|
|
The encoder names (``driver`` entries) can be passed to ``--ovc`` and
|
|
``--oac`` (without the ``lavc:`` prefix required by ``--vd`` and ``--ad``).
|
|
|
|
``demuxer-lavf-list``
|
|
List of available libavformat demuxers' names. This can be used to check
|
|
for support for a specific format or use with ``--demuxer-lavf-format``.
|
|
|
|
``mpv-version``
|
|
Return the mpv version/copyright string. Depending on how the binary was
|
|
built, it might contain either a release version, or just a git hash.
|
|
|
|
``mpv-configuration``
|
|
Return the configuration arguments which were passed to the build system
|
|
(typically the way ``./waf configure ...`` was invoked).
|
|
|
|
``ffmpeg-version``
|
|
Return the contents of the ``av_version_info()`` API call. This is a string
|
|
which identifies the build in some way, either through a release version
|
|
number, or a git hash. This applies to Libav as well (the property is
|
|
still named the same.) This property is unavailable if mpv is linked against
|
|
older FFmpeg and Libav versions.
|
|
|
|
``options/<name>`` (RW)
|
|
Read-only access to value of option ``--<name>``. Most options can be
|
|
changed at runtime by writing to this property. Note that many options
|
|
require reloading the file for changes to take effect. If there is an
|
|
equivalent property, prefer setting the property instead.
|
|
|
|
There shouldn't be any reason to access ``options/<name>`` instead of
|
|
``<name>``, except in situations in which the properties have different
|
|
behavior or conflicting semantics.
|
|
|
|
``file-local-options/<name>``
|
|
Similar to ``options/<name>``, but when setting an option through this
|
|
property, the option is reset to its old value once the current file has
|
|
stopped playing. Trying to write an option while no file is playing (or
|
|
is being loaded) results in an error.
|
|
|
|
(Note that if an option is marked as file-local, even ``options/`` will
|
|
access the local value, and the ``old`` value, which will be restored on
|
|
end of playback, cannot be read or written until end of playback.)
|
|
|
|
``option-info/<name>``
|
|
Additional per-option information.
|
|
|
|
This has a number of sub-properties. Replace ``<name>`` with the name of
|
|
a top-level option. No guarantee of stability is given to any of these
|
|
sub-properties - they may change radically in the feature.
|
|
|
|
``option-info/<name>/name``
|
|
Returns the name of the option.
|
|
|
|
``option-info/<name>/type``
|
|
Return the name of the option type, like ``String`` or ``Integer``.
|
|
For many complex types, this isn't very accurate.
|
|
|
|
``option-info/<name>/set-from-commandline``
|
|
Return ``yes`` if the option was set from the mpv command line,
|
|
``no`` otherwise. What this is set to if the option is e.g. changed
|
|
at runtime is left undefined (meaning it could change in the future).
|
|
|
|
``option-info/<name>/set-locally``
|
|
Return ``yes`` if the option was set per-file. This is the case with
|
|
automatically loaded profiles, file-dir configs, and other cases. It
|
|
means the option value will be restored to the value before playback
|
|
start when playback ends.
|
|
|
|
``option-info/<name>/default-value``
|
|
The default value of the option. May not always be available.
|
|
|
|
``option-info/<name>/min``, ``option-info/<name>/max``
|
|
Integer minimum and maximum values allowed for the option. Only
|
|
available if the options are numeric, and the minimum/maximum has been
|
|
set internally. It's also possible that only one of these is set.
|
|
|
|
``option-info/<name>/choices``
|
|
If the option is a choice option, the possible choices. Choices that
|
|
are integers may or may not be included (they can be implied by ``min``
|
|
and ``max``). Note that options which behave like choice options, but
|
|
are not actual choice options internally, may not have this info
|
|
available.
|
|
|
|
``property-list``
|
|
Return the list of top-level properties.
|
|
|
|
``profile-list``
|
|
Return the list of profiles and their contents. This is highly
|
|
implementation-specific, and may change any time. Currently, it returns
|
|
an array of options for each profile. Each option has a name and a value,
|
|
with the value currently always being a string. Note that the options array
|
|
is not a map, as order matters and duplicate entries are possible. Recursive
|
|
profiles are not expanded, and show up as special ``profile`` options.
|
|
|
|
``command-list``
|
|
Return the list of input commands. This returns an array of maps, where
|
|
each map node represents a command. This map currently only has a single
|
|
entry: ``name`` for the name of the command. (This property is supposed to
|
|
be a replacement for ``--input-cmdlist``. The option dumps some more
|
|
information, but it's a valid feature request to extend this property if
|
|
needed.)
|
|
|
|
``input-bindings``
|
|
Return list of current input key bindings. This returns an array of maps,
|
|
where each map node represents a binding for a single key/command. This map
|
|
has the following entries:
|
|
|
|
``key``
|
|
The key name. This is normalized and may look slightly different from
|
|
how it was specified in the source (e.g. in input.conf).
|
|
|
|
``cmd``
|
|
The command mapped to the key. (Currently, this is exactly the same
|
|
string as specified in the source, other than stripping whitespace and
|
|
comments. It's possible that it will be normalized in the future.)
|
|
|
|
``is_weak``
|
|
If set to true, any existing and active user bindings will take priority.
|
|
|
|
``owner``
|
|
If this entry exists, the name of the script (or similar) which added
|
|
this binding.
|
|
|
|
``section``
|
|
Name of the section this binding is part of. This is a rarely used
|
|
mechanism. This entry may be removed or change meaning in the future.
|
|
|
|
``priority``
|
|
A number. Bindings with a higher value are preferred over bindings
|
|
with a lower value. If the value is negative, this binding is inactive
|
|
and will not be triggered by input. Note that mpv does not use this
|
|
value internally, and matching of bindings may work slightly differently
|
|
in some cases. In addition, this value is dynamic and can change around
|
|
at runtime.
|
|
|
|
``comment``
|
|
If available, the comment following the command on the same line. (For
|
|
example, the input.conf entry ``f cycle bla # toggle bla`` would
|
|
result in an entry with ``comment = "toggle bla", cmd = "cycle bla"``.)
|
|
|
|
This property is read-only, and change notification is not supported.
|
|
Currently, there is no mechanism to change key bindings at runtime, other
|
|
than scripts adding or removing their own bindings.
|
|
|
|
Inconsistencies between options and properties
|
|
----------------------------------------------
|
|
|
|
You can access (almost) all options as properties, though there are some
|
|
caveats with some properties (due to historical reasons):
|
|
|
|
``vid``, ``aid``, ``sid``
|
|
While playback is active, these result the actually active tracks. For
|
|
example, if you set ``aid=5``, and the currently played file contains no
|
|
audio track with ID 5, the ``aid`` property will return ``no``.
|
|
|
|
Before mpv 0.31.0, you could set existing tracks at runtime only.
|
|
|
|
``display-fps``
|
|
This inconsistent behavior is deprecated. Post-deprecation, the reported
|
|
value and the option value are cleanly separated (``override-display-fps``
|
|
for the option value).
|
|
|
|
``vf``, ``af``
|
|
If you set the properties during playback, and the filter chain fails to
|
|
reinitialize, the option will be set, but the runtime filter chain does not
|
|
change. On the other hand, the next video to be played will fail, because
|
|
the initial filter chain cannot be created.
|
|
|
|
This behavior changed in mpv 0.31.0. Before this, the new value was rejected
|
|
*iff* video (for ``vf``) or audio (for ``af``) was active. If playback was
|
|
not active, the behavior was the same as the current behavior.
|
|
|
|
``playlist``
|
|
The property is read-only and returns the current internal playlist. The
|
|
option is for loading playlist during command line parsing. For client API
|
|
uses, you should use the ``loadlist`` command instead.
|
|
|
|
``profile``, ``include``
|
|
These are write-only, and will perform actions as they are written to,
|
|
exactly as if they were used on the mpv CLI commandline. Their only use is
|
|
when using libmpv before ``mpv_initialize()``, which in turn is probably
|
|
only useful in encoding mode. Normal libmpv users should use other
|
|
mechanisms, such as the ``apply-profile`` command, and the
|
|
``mpv_load_config_file`` API function. Avoid these properties.
|
|
|
|
Property Expansion
|
|
------------------
|
|
|
|
All string arguments to input commands as well as certain options (like
|
|
``--term-playing-msg``) are subject to property expansion. Note that property
|
|
expansion does not work in places where e.g. numeric parameters are expected.
|
|
(For example, the ``add`` command does not do property expansion. The ``set``
|
|
command is an exception and not a general rule.)
|
|
|
|
.. admonition:: Example for input.conf
|
|
|
|
``i show-text "Filename: ${filename}"``
|
|
shows the filename of the current file when pressing the ``i`` key
|
|
|
|
Within ``input.conf``, property expansion can be inhibited by putting the
|
|
``raw`` prefix in front of commands.
|
|
|
|
The following expansions are supported:
|
|
|
|
``${NAME}``
|
|
Expands to the value of the property ``NAME``. If retrieving the property
|
|
fails, expand to an error string. (Use ``${NAME:}`` with a trailing
|
|
``:`` to expand to an empty string instead.)
|
|
If ``NAME`` is prefixed with ``=``, expand to the raw value of the property
|
|
(see section below).
|
|
``${NAME:STR}``
|
|
Expands to the value of the property ``NAME``, or ``STR`` if the
|
|
property cannot be retrieved. ``STR`` is expanded recursively.
|
|
``${?NAME:STR}``
|
|
Expands to ``STR`` (recursively) if the property ``NAME`` is available.
|
|
``${!NAME:STR}``
|
|
Expands to ``STR`` (recursively) if the property ``NAME`` cannot be
|
|
retrieved.
|
|
``${?NAME==VALUE:STR}``
|
|
Expands to ``STR`` (recursively) if the property ``NAME`` expands to a
|
|
string equal to ``VALUE``. You can prefix ``NAME`` with ``=`` in order to
|
|
compare the raw value of a property (see section below). If the property
|
|
is unavailable, or other errors happen when retrieving it, the value is
|
|
never considered equal.
|
|
Note that ``VALUE`` can't contain any of the characters ``:`` or ``}``.
|
|
Also, it is possible that escaping with ``"`` or ``%`` might be added in
|
|
the future, should the need arise.
|
|
``${!NAME==VALUE:STR}``
|
|
Same as with the ``?`` variant, but ``STR`` is expanded if the value is
|
|
not equal. (Using the same semantics as with ``?``.)
|
|
``$$``
|
|
Expands to ``$``.
|
|
``$}``
|
|
Expands to ``}``. (To produce this character inside recursive
|
|
expansion.)
|
|
``$>``
|
|
Disable property expansion and special handling of ``$`` for the rest
|
|
of the string.
|
|
|
|
In places where property expansion is allowed, C-style escapes are often
|
|
accepted as well. Example:
|
|
|
|
- ``\n`` becomes a newline character
|
|
- ``\\`` expands to ``\``
|
|
|
|
Raw and Formatted Properties
|
|
----------------------------
|
|
|
|
Normally, properties are formatted as human-readable text, meant to be
|
|
displayed on OSD or on the terminal. It is possible to retrieve an unformatted
|
|
(raw) value from a property by prefixing its name with ``=``. These raw values
|
|
can be parsed by other programs and follow the same conventions as the options
|
|
associated with the properties.
|
|
|
|
.. admonition:: Examples
|
|
|
|
- ``${time-pos}`` expands to ``00:14:23`` (if playback position is at 14
|
|
minutes 23 seconds)
|
|
- ``${=time-pos}`` expands to ``863.4`` (same time, plus 400 milliseconds -
|
|
milliseconds are normally not shown in the formatted case)
|
|
|
|
Sometimes, the difference in amount of information carried by raw and formatted
|
|
property values can be rather big. In some cases, raw values have more
|
|
information, like higher precision than seconds with ``time-pos``. Sometimes
|
|
it is the other way around, e.g. ``aid`` shows track title and language in the
|
|
formatted case, but only the track number if it is raw.
|