So, I'll describe how this stuff works. The main modules: 1. streamer.c: this is the input layer, this reads the file or the VCD or stdin. what it has to know: appropriate buffering by sector, seek, skip functions, reading by bytes, or blocks with any size. The stream_t structure describes the input stream, file/device. 2. demuxer.c: this does the demultiplexing of the input to audio and video channels, and their reading by buffered packages. The demuxer.c is basically a framework, which is the same for all the input formats, and there are parsers for each of them (mpeg-es, mpeg-ps, avi, avi-ni, asf), these are in the demux_*.c files. The structure is the demuxer_t. There is only one demuxer. 2.a. demux_packet_t, that is DP. Contains one chunk (avi) or packet (asf,mpg). They are stored in memory as in chained list, cause of their different size. 2.b. demuxer stream, that is DS. Struct: demux_stream_t Every channel (a/v) has one. This contains the packets for the stream (see 2.a). For now, there can be 3 for each demuxer : - audio (d_audio) - video (d_video) - DVD subtitle (d_dvdsub) 2.c. stream header. There are 2 types (for now): sh_audio_t and sh_video_t This contains every parameter essential for decoding, such as input/output buffers, chosen codec, fps, etc. There are each for every stream in the file. At least one for video, if sound is present then another, but if there are more, then there'll be one structure for each. These are filled according to the header (avi/asf), or demux_mpg.c does it (mpg) if it founds a new stream. If a new stream is found, the ====> Found audio/video stream: messages is displayed. The chosen stream header and its demuxer are connected together (ds->sh and sh->ds) to simplify the usage. So it's enough to pass the ds or the sh, depending on the function. For example: we have an asf file, 6 streams inside it, 1 audio, 5 video. During the reading of the header, 6 sh structs are created, 1 audio and 5 video. When it starts reading the packet, it chooses the stream for the first found audio & video packet, and sets the sh pointers of d_audio and d_video according to them. So later it reads only these streams. Of course the user can force choosing a specific stream with -vid and -aid switches. A good example for this is the DVD, where the english stream is not always the first, so every VOB has different language :) That's when we have to use for example the -aid 128 switch. Now, how this reading works? - demuxer.c/demux_read_data() is called, it gets how many bytes, and where (memory address), would we like to read, and from which DS. The codecs call this. - this checks if the given DS's buffer contains something, if so, it reads from there as much as needed. If there isn't enough, it calls ds_fill_buffer(), which: - checks if the given DS has buffered packages (DP's), if so, it moves the oldest to the buffer, and reads on. If the list is empty, it calls demux_fill_buffer() : - this calls the parser for the input format, which reads the file onward, and moves the found packages to their buffers. Well it we'd like an audio package, but only a bunch of video packages are available, then sooner or later the: DEMUXER: Too many (%d in %d bytes) audio packets in the buffer error shows up. So everything is ok 'till now, I want to move them to a separate lib. Now, go on: 3. mplayer.c - ooh, he's the boss :) Its main purpose is connecting the other modules, and maintaining A/V sync. The given stream's actual position is in the 'timer' field of the corresponding stream header (sh_audio / sh_video). The structure of the playing loop : while(not EOF) { fill audio buffer (read & decode audio) + increase a_frame read & decode a single video frame + increase v_frame sleep (wait until a_frame>=v_frame) display the frame apply A-V PTS correction to a_frame check for keys -> pause,seek,... } When playing (a/v), it increases the variables by the duration of the played a/v. - with audio this is played bytes / sh_audio->o_bps Note: i_bps = number of compressed bytes for one second of audio o_bps = number of uncompressed bytes for one second of audio (this is = bps*samplerate*channels) - with video this is usually == 1.0/fps, but I have to note that fps doesn't really matters at video, for example asf doesn't have that, instead there is "duration" and it can change per frame. MPEG2 has "repeat_count" which delays the frame by 1-2.5 ... Maybe only AVI and MPEG1 has fixed fps. So everything works right until the audio and video are in perfect synchronity, since the audio goes, it gives the timing, and if the time of a frame passed, the next frame is displayed. But what if these two aren't synchronized in the input file? PTS correction kicks in. The input demuxers read the PTS (presentation timestamp) of the packages, and with it we can see if the streams are synchronized. Then MPlayer can correct the a_frame, within a given maximal bounder (see -mc option). The summary of the corrections can be found in c_total . Of course this is not everything, several things suck. For example the soundcards delay, which has to be corrected by MPlayer! The audio delay is the sum of all these: - bytes read since the last timestamp: t1 = d_audio->pts_bytes/sh_audio->i_bps - if Win32/ACM then the bytes stored in audio input buffer t2 = a_in_buffer_len/sh_audio->i_bps - uncompressed bytes in audio out buffer t3 = a_buffer_len/sh_audio->o_bps - not yet played bytes stored in the soundcard's (or DMA's) buffer t4 = get_audio_delay()/sh_audio->o_bps From this we can calculate what PTS we need for the just played audio, then after we compare this with the video's PTS, we have the difference! Life didn't get simpler with AVI. There's the "official" timing method, the BPS-based, so the header contains how many compressed audio bytes or chunks belong to one second of frames. In the AVI stream header there are 2 important fields, the dwSampleSize, and dwRate/dwScale pairs: - If the dwSampleSize is 0, then it's VBR stream, so its bitrate isn't constant. It means that 1 chunk stores 1 sample, and dwRate/dwScale gives the chunks/sec value. - If the dwSampleSize is >0, then it's constant bitrate, and the time can be measured this way: time = (bytepos/dwSampleSize) / (dwRate/dwScale) (so the sample's number is divided with the samplerate). Now the audio can be handled as a stream, which can be cut to chunks, but can be one chunk also. The other method can be used only for interleaved files: from the order of the chunks, a timestamp (PTS) value can be calculated. The PTS of the video chunks are simple: chunk number * fps The audio is the same as the previous video chunk was. We have to pay attention to the so called "audio preload", that is, there is a delay between the audio and video streams. This is usually 0.5-1.0 sec, but can be totally different. The exact value was measured until now, but now the demux_avi.c handles it: at the audio chunk after the first video, it calculates the A/V difference, and take this as a measure for audio preload. 3.a. audio playback: Some words on audio playback: Not the playing is hard, but: 1. knowing when to write into the buffer, without blocking 2. knowing how much was played of what we wrote into The first is needed for audio decoding, and to keep the buffer full (so the audio will never skip). And the second is needed for correct timing, because some soundcards delay even 3-7 seconds, which can't be forgotten about. To solve this, the OSS gives several possibilities: - ioctl(SNDCTL_DSP_GETODELAY): tells how many unplayed bytes are in the soundcard's buffer -> perfect for timing, but not all drivers support it :( - ioctl(SNDCTL_DSP_GETOSPACE): tells how much can we write into the soundcard's buffer, without blocking. If the driver doesn't support GETODELAY, we can use this to know how much the delay is. - select(): should tell if we can write into the buffer without blocking. Unfortunately it doesn't say how much we could :(( Also, doesn't/badly works with some drivers. Only used if none of the above works. 4. Codecs. They are separate libs. For example libac3, libmpeg2, xa/*, alaw.c, opendivx/*, loader, mp3lib. mplayer.c doesn't call the directly, but through the dec_audio.c and dec_video.c files, so the mplayer.c doesn't have to know anything about the codec. 5. libvo: this displays the frame. The constants for different pixelformats are defined in img_format.h, their usage is mandatory. Each vo driver _has_ to implement these: IMPORTANT: it's mandatorial that every vo driver support the YV12 format, and one (or both) of BGR15 and BGR24, with conversion, if needed. If these aren't supported, not every codec will work! The mpeg codecs can output only YV12, and the older win32 DLLs only 15 and 24bpp. There is a fast MMX-optimized 15->16bpp converter, so it's not a significant speed-decrease! The BPP table, if the driver can't change bpp: current bpp has to accept these 15 15 16 15,16 24 24 24,32 24,32 If it can change bpp (for example DGA 2, fbdev, svgalib), then if possible we have to change to the desired bpp. If the hardware doesn't support, we have to change to the one closest to it, and do conversion! control() - sends control requests to the device VOCTRL_QUERY_VAA - this is used by the vidix extension this is used by the vidix extension to fill a vo_vaa_t struct, I do not know how this works since I'm not the author of this VOCTRL_QUERY_FORMAT - queries if a given pixelformat is supported. return value: flags: 0x1 - supported (by hardware or conversion) 0x2 - supported (by hardware, without conversion) 0x4 - sub/osd supported (has draw_alpha) 0x8 - hardware handles subpics 0x100 - driver/hardware handles timing (blocking) VOCTRL_RESET - reset the video device This is sent on seeking and similar and is useful if you are using a device which prebuffers frames that need to flush them before refilling audio/video buffers. init() - this is called before displaying of the first frame - initializing buffers, etc. draw_slice(): this displays YV12 pictures (3 planes, one full sized that contains brightness (Y), and 2 quarter-sized which the colour-info (U,V). MPEG codecs (libmpeg2, opendivx) use this. This doesn't have to display the whole frame, only update small parts of it. draw_frame(): this is the older interface, this displays only complete frames, and can do only packed format (YUY2, RGB/BGR). Win32 codecs use this (DivX, Indeo, etc). draw_alpha(): this displays subtitles and OSD. It's a bit tricky to use it, since it's not a part of libvo API, but a callback-style stuff. The flip_page() has to call vo_draw_text(), so that it passes the size of the screen and the corresponding draw_alpha() implementation for the pixelformat (function pointer). The vo_draw_text() checks the characters to draw, and calls draw_alpha() for each. As a help, osd.c contains draw_alpha for each pixelformats, use this if possible! flip_page(): this is called after each frame, this diplays the buffer for real. This is 'swapbuffers' when double-buffering. 6. libao2: this control audio playing As in libvo (see 5.) also here are some drivers, based on the same API: static int control(int cmd, int arg); This is for reading/setting driver-specific and other special parameters. Not really used for now. static int init(int rate,int channels,int format,int flags); The init of driver, opens device, sets sample rate, channels, sample format parameters. Sample format: usually AFMT_S16_LE or AFMT_U8, for more definitions see dec_audio.c and linux/soundcards.h files! static void uninit(); Guess what. Ok I help: closes the device, not (yet) called when exit. static void reset(); Resets device. To be exact, it's for deleting buffers' contents, so after reset() the previously received stuff won't be output. (called if pause or seek) static int get_space(); Returns how many bytes can be written into the audio buffer without blocking (making caller process wait). If the buffer is (nearly) full, has to return 0! If it never gives 0, MPlayer won't work! static int play(void* data,int len,int flags); Plays a bit of audio, which is received throught the "data" memory area, with a size of "len". The "flags" isn't used yet. It has to copy the data, because they can be overwritten after the call is made. Doesn't really have to use all the bytes, it has to give back how many have been used (copied to buffer). static float get_delay(); Returns how long time it will take to play the data currently in the output buffer. Be exact, if possible, since the whole timing depends on this! In the worst case, return the maximum delay. !!! Because the video is synchronized to the audio (card), it's very important !!! that the get_space and get_delay functions are correctly implemented! 6.a audio plugins Audio plugins are used for processing the audio data before it reaches the soundcard driver. A plugin can change the following aspects of the audio data stream: 1. Sample format 2. Sample rate 3. Number of channels 4. The data itself (i.e. filtering and other sound effects) 5. The delay (almost all plugins does this) The plugin interface is implemented as a pseudo device driver with the catchy name "plugin". The plugins are executed sequentially ordered by the "-aop list=plugin1,plugin2,..." command line switch. To add plugins add an entry in audio_plugin.h the makefile and create a source file named "pl_whatever.c". Input parameters are added to audio_plugin.h and to cfg-mplayer.h. A good starting point for writing plugins is pl_delay.c. Below is a description of what the functions does: static int control(int cmd, int arg); This is for reading/setting plugin-specific and other special parameters and can be used for keyboard input for example. All plugins bust respond to cmd=AOCONTROL_PLUGIN_SET_LEN which is part of the initialization of the plugin. When this command is received the parameter pl_delay.len will contain the maximum size of data the plugin can produce. This can be used for calculating and allocating buffer space for the plugin. Before the function exits the parameter pl_delay.len must be set to the maximum data size the plugin can receive. Return CONTROL_OK for success and CONTROL_ERROR for fail, other control codes are found in audio_out.h. static int init(); This function is for initializing the plugin, it is called once before the playing is started. In this function the plugin can read AND write to the ao_plugin_data struct to determine and set input and output parameters. It is important to write to the ao_plugin_data.sz_mult and ao_plugin_data.delay_fix parameters if the plugin changes the data size or adds delay. Return 0 for fail and 1 for success. static void uninit() Called before mplayer exits. Used for deallocating dynamic buffers. static void reset() Called during reset can be used to empty buffers. Mplayer calls this function when pause is pressed. static int play() Called for every block of audio data sent through the plugin. This function should be optimized for speed. The incoming data is found in ao_plugin_data.data having length ao_plugin_data.len. These two parameters should be changed by the plugin. Return 1 for success and 0 for fail.