Prevents the status line from being printed. Otherwise, the status line
is always printed due to --frames=1, and it's visible on the terminal
because it's printed to stderr.
This way it's possible to retrieve correct information about video, like
actual width/height, which in general are available only after at least
one frame has been sent to the video output, such as dwidth/dheight.
mpv_identify.sh becomes a bit slower, because we let it decode enough
audio and video to fill the audio buffers and to send one frame to the
video output. Also, --playing-msg isn't shown anymore with --frames=0
(could be fixed by special-casing it, should this break any use cases).
Note that in some corner cases, like when the demuxer for some reason
returns lots of audio packets but no video packets at the start, but
video actually starts later, the --playing-msg will still be output
before video starts.
Add new properties "dwidth" and "dheight", which contain the video
size as known by the VO (not necessarily what the VO makes out of them,
i.e. without window scaling and panscan).
Looks like unicode support was broken with this simple `fonts.conf`. Copy more
(all) of fontconfig's default `fonts.conf`.
Fixes#13
Signed-off-by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
If one of the bundled libraries is pointing to a missing dylib stop the
bundling and exit with an error. This can happen if the user uninstalled a
dependency after he built the binary/libraries.
The osxbundle target creates a bundle that is supposed to be distributable
to third parties. As they may not have fontconfig installed they miss a
fonts.conf pointing to the usual fonts directories in OSX.
For people installing from source and using from the terminal this commit
changes nothing. You just have to make sure that your fontconfig is installed
with a sane configuration (XQuartz does). If you are installing fontconfig from
source you can force a sane OSX default using `--with-add-fonts`. For example:
`./configure --with-add-fonts=/Library/Fonts,~/Library/Fonts`
Homebrew already addressed this with mxcl/homebrew@b242883
file2string.pl and vdpau_functions.pl are direct ports.
matroska.py was reimplemented as the Parse::Matroska module in CPAN,
and matroska.pl was made a client of Parse::Matroska.
A copy of Parse::Matroska is included in TOOLS/lib, and matroska.pl
looks there first when trying to load the module.
osxbundle.py was not ported since I have no means to verify it.
Python is always available on OSX though, so there is no harm in
removing the check for it on configure.
It looks like that only `install_name_tool -change` must be applied
recursively. This allows to bundle up all our stuff without thinkering with
the Mach-O headerpad size (which could even be impossible for libraries we
don't compile and link ourselves).
Add a make task and python script to create a Mac OS X Application Bundle
to be used when compiling with the --enable-macosx-finder and
--enable-macosx-bundle configure flags.
The main svg icon was created by me and heavily inspired by Apple's iTunes
and AppStore icon designs. We are still looking for something better.
For the audio, movie and subtitles icons I added the main logo to MPlayer OSX
Extended icons.
Use with `make osxbundle` after running configure and make.
This changes the name of this project to mpv. Most user-visible mentions
of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the
default config file location are changed as well.
The new default config file location is: ~/.mpv/
Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI,
which has been removed from mplayer2 ages ago.
We don't have a logo, and the MS Windows resource files sort-of require
one, so leave etc/mplayer.ico/.xpm as-is.
Remove the debian and rpm packaging scripts. These contained outdated
dependencies and likely were more harmful than useful. (Patches which
add working and well-tested packaging are welcome.)
And it never was. This property is write-only and exists only for
setting the program. Making it readable is possible, but would require
demuxer changes.
Use "-" instead of "_" in property names. The intent is that property
names and options names should be the same (if they refer to the same
thing), and options use "-" as word separator.
Rename some other properties too, e.g. "switch_audio" -> "audio".
Add a way to translate the old property names to the new ones, similar
to the input command legacy bridge.
Update input.conf. Use the new property names, and don't use legacy
commands.
When the first frame of a telecine pattern did not generate an output
frame (because it is a 0 or a 1), this could lead to the first two
output frames getting equal pts values.
When the first frame of a telecine pattern generates exactly one output
frame (i.e. when the telecine pattern starts with 2 or 3), then the
output was correct before this comment, and still is unchanged.
When the first frame of a telecine pattern generates more than one
output frame (i.e. when it starts with 4 to 9), then output pts are
still broken. This is not really solvable without knowing the frame
duration, or delaying output by one frame.
This is done by requesting a buffer from the next filter in the chain, instead
of always allocating our own. This allows the next filter to e.g. ensure its
own preferred memory layout.
There is lots of badly and inconsistently formatted code left, which
leaves us with the frequent need for cleaning up. This uncrustify
profile can be used for automatic reformatting. The author of this file
is (perhaps) uau.
It's different from mplayer-svn's TOOLS/mp-uncrustify-style.cfg. The
differences and origins of these files are unclear, but the file added
with this commit is probably more consistent with the heavily cleaned
up areas of mplayer2 and this fork.
The script was written to be able to deal with binary files, but it had
a bug corrupting some data: e.g. a byte sequence 0x1 0x37 was printed as
"\17" (0x1 = escaped as "\1", and 0x37 = kept as literal "7"), which
would be interpreted as single character 0xF.
Always pad octal literals to length 3, which makes the escape sequences
unambiguous.
Most of the scripts in TOOLS seem entirely useless. Remove them.
There were about 3 types of scripts:
- apparent developer tools (like file format dumpers, benchmarks)
=> I doubt any mplayer developer still alive even uses these
- helpers for encoding or ripping stuff
=> mencoder is gone, at least from this version of mplayer
- helpers meant for users (launching mplayer in weird ways, etc.)
=> just no, it will cause you more pain than gain
So no, there is nothing useful.
Under the scripts not deleted, these are needed for building mplayer:
file2string.py
matroska.py
vdpau_functions.py
These might have _some_ use (but still questionable):
binary_codecs.sh
checktree.sh
I have no idea what these are about, but it's probably useless outdated
crap. According to TOOLS/README, they are wrappers around
some Real binary codecs. They were added in 2003, and never touched
again (except for cosmetic changes).
The player can read codec mapping (codecs.conf) from an external file
or use embedded defaults. Before, the defaults were stored in the
player binary in the form of final already-parsed data structures.
Simplify things by storing the text of the codecs.conf file instead,
and parse that at runtime the same way an external file would be
parsed.
To create the previous parsed form, the build system first compiled a
separate binary named "codec-cfg", which parsed etc/codecs.conf and
then wrote the results as a C data structure that could be compiled
into the program. The new simple conversion of codecs.conf into a C
string is handled by the new script TOOLS/file2string.py.
After removing the codec-cfg binary, HOST_CC is no longer used for
anything. Remove the --host-cc configure option and associated logic.
Also remove the codec2html and codec-cfg-test functionality. Building
those was already broken and nobody cared.
There was a broken 3-character-long "fourcc" entry in etc/codecs.conf.
This happened to be accepted before but triggered a parse error after
the changes. Remove the broken entry and make the parsing functions
explicitly test for this error.
Some files used during build are generated with Python scripts in
TOOLS/. Before, the generated files were included in the git tree.
Start creating them at build time. This introduces a build-dependency
on python3.
The files in question are:
libvo/vdpau_template.c
libmpdemux/ebml_types.h
libmpdemux/ebml_defs.c
Fix printf format string warning
fixes this warning:
asfinfo.c: In function 'print_video_header':
asfinfo.c:158: warning: format '%.4s' expects type 'char *', but argument 3 has type 'long int *'
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32774 b3059339-0415-0410-9bf9-f77b7e298cf2
add missing fclose
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32775 b3059339-0415-0410-9bf9-f77b7e298cf2
add missing fclose()
found by cppcheck:
[avisubdump.c:199]: (error) Resource leak: f
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32776 b3059339-0415-0410-9bf9-f77b7e298cf2
* sub:
sub/OSD: move some related files to sub/
subtitles: options: enable -ass by default
subtitles: change default libass rendering style
demux_mkv, chapters: change millisecond arithmetic to ns
cleanup: rename ass_* functions to mp_ass_*
subs: use correct font aspect ratio for libass + converted subs
cleanup: some random minor code simplification and cleanup
vf_vo: fix EOSD change detection bug
sd_ass: remove subreader use, support plaintext markup
subtitles: style support for common SubRip tags and MicroDVD
core: ordered chapters: fix bad subtitle parameter
subs/demux: don't try to enable sub track when creating it
subtitles/demux: store duration instead of endpts in demux packets
subtitles: add framework for subtitle decoders
options: add special -leak-report option
subtitles: remove code trying to handle text subs with libavcodec
cleanup: move MP_NOPTS_VALUE definition to mpcommon.h
subtitles: move global ass_track to struct osd_state
core: move most mpcommon.c contents to mplayer.c
core: move global "subdata" and "vo_sub_last" to mpctx
subtitles: remove sub_last_pts hack
options: move -noconfig to option struct, simplify
Add definitions for DisplayUnit, OutputSamplingFrequency and
FileDescription in matroska.py. Regenerate the C template files to
allow using all current definitions in code.
