Useless garbage.
This was once added to test whether vdpau presentation feedback could be
used. Results were always unsatisfactory, and now vdpau is dead.
Semantics a bit questionable. This is done for the OSC (next commit),
and a comment added the manpage explicitly states this. Meaning this is
probably garbage and needs to revisit when the OSC changes and/or
someone wants to use this margin feature for something else.
Not sure about the subtitle thing. It's imaginable that someone uses
these options to create empty borders for subtitles on the bottom, so
subtitles should be located there. On the other hand, this gives a
rather unpolished user experience when using the (later added) OSC
feature to not overlap with the video. There's not much of a point if
the OSC still overlaps the video. However, I'm too lazy to think about
this, so it stays like it is.
--video-margin-ratio-left=0.2 --video-margin-ratio-right=0.9 (added in
the the next commit) will set f_w to inf, resulting in some garbage
being propagated. Later, the OSD margins are computed from values before
various sanity clamping is applied, which makes libass suffer from
bullshit values.
I'm very sure it's OK and more correct to compute the OSD margins using
the later values, but I'm not sure about that.
This one is probably not terribly obvious from just the valgrind log,
but a wayland dev explained it to me just a second ago. Whenever mpv
sends events to the screen with wl_display_dispatch, wayland internally
allocates memory to a struct wl_proxy object if a new id is found. Quite
a few more things happen to that proxy object, but eventually mpv stores
the data on the client-side in a wrapper type of struct (struct
wl_data_offer). mpv's data_device_listener keeps track of those proxies
and frees the memory when appropriate. Of course, mpv is constantly
sending events to the screen and does so until the user quits the
player. What happens here is that one final wl_display_dispatch is called
right before the user quits the player and before mpv's
data_device_listener can handle that object. So the result is that you
always have one extra dangling proxy that doesn't get properly freed.
The solution is to just simply call wl_data_offer_destroy before closing
the wl_display to free that final dangling wl_proxy.
Extending the client-allocated mpv_opengl_drm_params struct
constituted a break of ABI that could cause UB.
Create a clean break by deprecating "drm_params" and related structs
and enum values, and replacing it with "drm_params_v2".
Also fix some comments and code that wrongly assumed that open could
return any other negative number than -1 for failure.
This commit updates the libmpv version to 1.104
Like hwdec_cuda, you get a big #ifdef mess if you try and keep the
OpenGL and Vulkan interops in the same file. So, I've refactored
them into separate files in a similar way.
Originally, vo_gpu/vo_opengl considered the case of Nvidia proprietary
drivers, which required vdpau/GLX, and Intel open source drivers, which
require vaapi/EGL. Since window creation and GPU context creation are
inseparable in mpv's internal API, it had to pick the correct API very
early, or hardware decoding wouldn't work. "x11probe" was introduced for
this reason. It created a GLX context (without showing the window yet),
and checked whether vdpau was available. If yes, it used GLX, if not, it
continued probing x11/EGL. (Obviously it couldn't always fail on GLX
without vdpau, which is why it was a separate "probe" backend.)
Years passed, and now the situation is different. Vdpau is dead. Nvidia
drivers and libavcodec now provide CUDA interop, which requires EGL, and
fixes some of the vdpau problems. AMD drivers now provide vaapi, which
generally works better than vdpau. Intel didn't change.
In particular, vaapi provides working HEVC Main10 support. In theory, it
should work on vdpau too, with quality reduction (no 10 bit surfaces),
but I couldn't get it to work.
So always prefer EGL. And suddenly hardware decoding works. This is
actually rather important, because HEVC is unfortunately on the rise,
despite shitty encoders and unoptimized decoders. The latter may mean
that hardware decoding works better than libavcodec.
This should have been done a long, long time ago.
In some cases, src.sig_peak remains undefined as 0, which was definitely
the case when using the OSD, since it never got passed through the usual
color space normalization process. Most robust work-around is to simply
force the normalization at the site where it's needed. This ensures this
value is always valid and defined, to make the peak-dependent logic in
these two functions always work.
Fixes 4b25ec3a9dFixes#6917Fixes#6918
Mesa supports the EGL_CHROMIUM_sync_control extension, and it's
available out of the box with AMD drivers. In practice, this is exactly
the same as GLX_OML_sync_control, but for EGL. The extension
specification is separate from the GLX one though, and buried somewhere
in the Chromium code.
This appears to work, although I don't know if it really works.
In theory, this could be useful for other EGL targets. Support code for
it could have been added to egl_helpers.c to avoid some minor duplicated
glue code if another EGL target were to provide this extension. I didn't
bother with that. ANGLE on Windows can't support it, because the
extension spec. explicitly requires POSIX timers. ANGLE on Linux/OSX is
actively harmful for mpv and hopefully won't ever use it. Wayland uses
EGL, but has its own fancy presentation feedback stuff (and besides, I
don't think basic video player functionality works on Wayland at all).
context_drm_egl maybe? But I think DRM has its own stuff.
So the next commit can make EGL use it. EGL has a quite similar
function, that practically works the same. Although it's relatively
trivial, it's still tricky, and probably shouldn't end up as duplicated
code.
There are no functional changes, except initialization, and how failure
of the glXGetSyncValues call is handled. Also, some comments mention the
EGL extension.
Note that there's no intention for this code to handle anything else
than the very specific OML sync extension (and its EGL equivalent). This
is just too weirdly specific to the weird idiosyncrasies of the
extension, and it makes no sense to extend it to handle anything else.
(Such as Wayland or DXGI presentation feedback.)
In the past, src peak was always equal to or higher than dst peak. But
since `--target-peak` got introduced, this could no longer be the case.
This leads to an incorrect result (scaling for peak mismatch in gamma
light) unless some other option (CMS, --linear-scaling, etc.) forces the
linearization.
Fixes#6533
We collect a 'vulkan-device' option today but then don't actually
pass it on, so it's useless. Once that's fixed, it can be used
to select a specific vulkan device by name.
Tested with the new nvidia offload feature to select between the
nvidia and intel GPUs.
Somehow I got the idea that compound literals had function-scoped
lifetime. Instead, like all other objects with automatic storage
duration, compound literals are block-scoped, so they become invalid
after exiting the block they were declared in. It seems like a recent
change to GCC actually reuses the memory that the compound literals
used to occupy, which was causing a few bugs.
The pattern of conditionally assigning a pointer to a compound literal
was used in a few places in ra_d3d11 where the Direct3D API expects
either a pointer to an initialised struct or NULL. Change these to
ensure the lifetime of the struct includes the API call.
Should fix#6775.
This is documented as required (although we did not do it in
the old GL codepath, with no visible problems) and I have seen
transient artifacts after seeking which _appear_ to have gone
away after introducing this.
this migrates our current swift code to version 5 and 4. building is
support from 10.12.6 and xcode 9.1 onwards.
dynamic linking is the new default, since Apple removed static libs
from their new toolchains and it's the recommended way.
additionally the found macOS SDK version is printed since it's an
important information for finding possible errors now.
Fixes#6470
We saw a segfault when trying to use the intel-media-driver (iHD)
rather than the normal intel va driver. This happened because the
iHD driver reports P010 (and maybe other formats) with multiple
layers to represent the interleaved UV plane. The normal va driver
reports one UV layer to match the plane.
This threw off my logic which assumed that the number of layers
could not exceed the number of planes.
There's a way one could fix this in a fully generalised form, but
I'm just going to do what the EGL path does and assume that:
* Layer 'n' is on Plane 'n' for n < total number of planes
* These layers always start at offset 0 on the plane
You can imagine ways that these assumptions are violated, but at
least the failure will look the same for both EGL and Vulkan
paths.
Today, we normally see a format error when probing because yuyv422
cannot be used, but it's in the normal set of probed formats.
This error is distracting and confusing, so only log probing errors
at the VERBOSE level.
Fixes#6411
This change introduces a vulkan interop path for the vaapi hwdec.
The basic principles are mostly the same as for EGL, with the
exported dma_buf being imported by Vukan. The biggest difference
is that we cannot reuse the texture as we do with OpenGL - there's
no way to rebind a VkImage to a different piece of memory, as far
as I can see. So, a new texture is created on each map call.
I did not bother implementing a code path for the old libva API as
I think it's safe to assume any system with a working vulkan driver
will have access to a newer libva.
Note that we are using separate layers for the vaapi surface, just
as is done for EGL. This is because libplacebo doesn't support
multiplane images.
This change does not include format negotiation because no driver
implements the vk_ext_image_drm_format_modifier extension that
would be required to do that. In practice, the two formats we care
about (nv12, p010) work correctly, so we are not blocked. A separate
change had to be made in libplacebo to filter out non-fatal validation
errors related to surface sizes due to the lack of format negotiation.
New releases of VDPAU support decoding 4:4:4 content, and that comes
back as NV24 when using 'direct mode' in OpenGL Interop. That means we
need to be a little bit smarter about how we set up the OpenGL
textures.
If the compositor sends a configure event before the surface is initially
mapped, resize gets called before the egl_window gets created, resulting
in a crash in wl_egl_window_resize.
This was fixed back in 618361c697, but was reintroduced when the wayland
code was rewritten in 68f9ee7e0b.
While `ra` supports the concept of a texture as a storage
destination, it does not support the concept of a texture format
being usable for a storage texture. This can lead to us attempting
to create a texture from an incompatible format, with undefined
results.
So, let's introduce an explicit format flag for storage and use
it. In `ra_pl` we can simply reflect the `storable` flag. For
GL and D3D, we'll need to write some new code to do the compatibility
checks. I'm not going to do it here because it's not a regression;
we were already implicitly assuming all formats were storable.
Fixes#6657
This started as a desperate attempt to lower the memory requirement
of error diffusion, but later it turns out that this change also
improved the rendering performance a lot (by 40% as I tested).
Errors was stored in three uint before this change, each with 24bit
precision. This change encoded them into a single uint, each with 8bit
precision. This reduced the shared memory usage, as well as number of
atomic operations, all by three times.
Before this change, with the minimum required 32kb shared memory, only
the `simple` kernel can be used to render 1080p video, which is mostly
useless compare to `--dither=fruit`. After this change, 32kb can
handle `burkes` kernel for 1080p, or `sierra-lite` for 4K resolution.
error diffusion requires two texture rendering pass. The existing code
reuses `screen_tex` and creates another for such purpose. This works
generally well for opengl, but could potentially be problematic for
vulkan, due to its async natural.
This is a straightforward parallel implementation of error diffusion
algorithms in compute shader. Basically we use single work group with
maximal possible size to process the whole image. After a shift
mapping we are able to process all pixels column by column.
A large ring buffer are allocated in shared memory to speed things up.
However the size of required shared memory depends linearly on the
height of video window (or screen height in fullscreen mode). In case
there is no enough shared memory, it will fallback to `--dither=fruit`.
The maximal allowed work group size is hardcoded as 1024. Ideally we
could query `GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS`. But for whatever
reason, it seems most high end card from nvidia and amd support only
the minimal required value, so I guess we can stick to it for now.
When the D3D11 backend was first written, SPIRV-Cross only had a C++ API
and no guarantee of API or ABI stability, so instead of using
SPIRV-Cross directly, mpv used an unofficial C wrapper called crossc.
Now that KhronosGroup/SPIRV-Cross#611 is resolved, SPIRV-Cross has an
official C API that can be used instead, so remove crossc and use
SPIRV-Cross directly.
The calculation of scale factor involves 32-bit float, and a strict
equality test will effectively ignore `--scaler-resizes-only` option
for some non-integer scale factor.
Fix this by using non-strict equality check.
since the none native fs is a special legacy case it needs a special
quit routine. it indefinitely waited for an exit fs screen event to
shutdown properly, though that event only fires for the native fs.
now we check if we really are using a native fullscreen and if not
shutdown immediately.
Fixes#6704
These were unnecessary for a couple of reasons, but it seems like the
old code went through a lot of effort to avoid duplicating the code to
print a RECT, even though the windowrc gets printed anyway at the end of
the function.
Avoid printing the same windowrc twice by only printing it when it gets
changed (in the w32->current_fs branch.)
This allows to select the drm mode using a string specification. You
can either select the the preferred mode, the mode with the highest
resolution, by specifying WxH[@R] or by its index in the list of modes
as before.
This was implemented by using OPT_STRING_VALIDATE for drm-mode,
instead of OPT_INT. Using a string here also prepares for future
additions to drm-mode that aim to allow specifying a mode by its
resolution.
It is useful when debugging to be able to force atomic off, or as a
workaround if atomic breaks for some user. Legacy modesetting is less
likely to break by virtue of being a less complex API.
The amount of code now present that's specific to Vulkan or OpenGL
has reached the point where we really want to split it out to
avoid a mess of #ifdefs.
At the same time, I'm moving the code to an api neutral location.
the force unwrapping of optionals caused many unpredictable segfaults
instead of gracefully exiting or falling back. besides that, it is bad
practice and the code is a lot more stable now.
wm4
dudemanguy
Anton Kindestam
Philip Langdale
Niklas Haas
sfan5
Hui Jin
der richter
James Ross-Gowan
wnoun
Philip Langdale
Michael Forney
Bin Jin
Jan Ekström