Move them into per-instance structs. This should get rid of all global
variables in mplayer.c (not counting those referenced by cfg-mplayer.h).
In core/input/ar.c, just remove checking the slave_mode variable. I'm
not sure what this code was supposed to achieve, but slave mode is
broken, slave mode is actually infeasible on OSX (ar.c is completely OSX
specific), and the correct way of doing this would be to disable this
input device per command line switch.
Separate the video output options from the big MPOpts structure and also only
pass the new mp_vo_opts structure to the vo backend.
Move video_driver_list into mp_vo_opts
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
When paused, --cursor-autohide worked with a precision of 500ms, which
is the main loop's default sleep time when paused. Cursor hiding is
polled in x11_common, and the main loop never called the X11 code at
the right time. Fix this by allowing the VO to set a time when it
should be called next.
Emulate percentage-seeks (SEEK_FACTOR) as normal time-seeks if possible.
This fixes some issues with (let's call it) low quality implementations
of SEEK_FACTOR (e.g. demux_mkv basically interprets this as byte-seek,
and also seeking to 99.9% makes it seek back to the start).
For weird MPEG formats the demuxer level SEEK_FACTOR is still used.
These formats, which can have timestamp resets, are identified by
setting demuxer->ts_resets_possible to true.
Also, have get_current_pos_ratio() follow the same rules, and calculate
the percentage position with the file position if timestamp resets are
possible.
This actually fixes percentage-seeks in .ts files with demux_lavf.c.
This kind of seek is not really used now, but it will be more important
when we add a progress bar.
Note: seeking in chained ogg files is still completely broken. The main
issue is that ffmpeg doesn't provide a sane API for dealing with
timestamp resets, and trying to do byte seeks with ogg confuses demuxer
and decoder (or something like this) and just does random things.
(Tested with two concatenated flac-in-ogg files).
VFCAP_OSD was used to determine at runtime whether the VO supports OSD
rendering. This was mostly unused. vo_direct3d had an option to disable
OSD (was supposed to allow to force auto-insertion of vf_ass, but we
removed that anyway). vo_opengl_old could disable OSD rendering when a
very old OpenGL version was detected, and had an option to explicitly
disable it as well.
Remove VFCAP_OSD from everything (and some associated logic). Now the
vo_driver.draw_osd callback can be set to NULL to indicate missing OSD
support (important so that vo_null etc. don't single-step on OSD
redraw), and if OSD support depends on runtime support, the VO's
draw_osd should just do nothing if OSD is not available.
Also, do not access vo->want_redraw directly. Change the want_redraw
reset logic for this purpose, too. (Probably unneeded, vo_flip_page
resets it already.)
Use floats instead of integers in the range 0-100. Currently, the OSD
is currently made up of 46 elements so no change should be visible, but
rendering of the bar will be changed later to use vector drawings (using
pixel coordinates) instead of glyphs. This commit is for preparation.
The percent position is used for the OSD, the status line, and for the
OSD bar (shown on seeks). By default, the PTS of the last demuxed packet
was used to calculate it. This led to a "jumpy" display when the
percentage value (casted to int) was changing. The reasons for this were
the presence of video frame reordering (packet PTS is not monotonic), or
getting PTS values from different streams (like audio/subs).
Since these rely on PTS values and correct file durations anyway,
simplify it by calculating it with the current playback position in
mplayer.c instead.
"End of file" was printed to the terminal instead of "Quit" when exiting
with the "quit" slave command (closing the window and such). Note that
it will still print EOF when it exists because the end of the playlist
is reached.
Do some other (not strictly related) simplifications.
This was supposed to be fixed in f897138, but there's another corner
case. Basically, set_osd_function() reset the OSD time, which is not
nice at all and breaks the logic of letting OSD elements disappear when
they're not wanted anymore. Fix this by adding a separate timer for
this.
Additionally, make sure the OSD bar is _really_ always updated when
visible. Also, redraw the OSD only if the OSD bar actually changes to
prevent redrawing too often (every vo_osd_changed() will flag that the
OSD should be redrawn, even if nothing changes).
Increase robustness against out of bound chapter numbers. Normally
these functions expect that the callers sanitize the chapter number.
This went wrong at least in add_seek_osd_messages() (which displayed
a chapter "-1" when chapters were not available). Make these functions
a bit friendler and add some reasonable checks and fallbacks, which
fixes the mentioned chapter seeking case as well.
This affects the "show_progress" command, by defualt on the 'P' key.
If there are complaints, I'll probably remove it again. (It looks
relatively annoying, but it also valueable information... sort of.)
Seeks can be performed with OSD bar invisible (e.g. "osd-msg seek ..."
command), and then an already visible bar won't be updated. But the bar
will stick around until the OSD text is hidden. This is confusing, so
change it that the bar is updated. (Making the bar disappear on such
seeks would require much more changes, so we're lazy and go with this
commit.)
The seek bar appeared to be "stuck" to the start of the current chapter.
This is a regression from 630a2b1. This commit assumed that hrseek_pts
would always contain the hrseek target time (when hrseek_active==true).
But this is not always the case: when playing timeline stuff (e.g.
ordered chapters), hrseek framedropping is abused to handle an obscure
corner case, and then hrseek_pts contains something completely unrelated
to the current playback time. See the added comment in mplayer.c and
commit c1232c9.
Fix this by trying something else to get a correct time "during"
hr-seeks. mpctx->restart_playback looks ideal, because it's set while
audio is being synced / audio buffers being filled, so we know that the
audio time is probably bogus while it is set. Let's hope this is
correct.
Also move the lang field into the general stream header. (SH_COMMON is
an old hack to "share" code between audio/video/sub headers.)
There should be no functional changes, other than not printing stream
info in verbose mode or with slave mode. (The frontend already prints
stream info, and this is just a leftover when individual demuxers did
this, and slave mode remains broken.)
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
Simplify --no-config and make it a normal flag option, and doesn't take
an argument anymore. You can get the same behavior by using --no-config
and then --include to explicitly load a certain config file.
Make --no-config work for input.conf as well. Make it so that
--input:conf=file still works in this case. As a technically unrelated
change, the file argument now works as one would expect, instead of
making it relatively to "~/.mpv/". This makes for simpler code and
easier to understand option semantics. We can also print better error
messages.
Doesn't have much of a purpose for normal playback. You can get
milliseconds display with --osd-fractions. It's also possible to build
a custom status line with --status-msg.
This gives more space on the status line and, in my opinion, is a bit
less annoying.
This could write .edl files in MPlayer's format. Support for playing
these files has been removed from mplayer2 quite a while ago. (mplayer2
can play its own, "new" .edl format, but does not support writing it.)
Since this is a rather obscure functionality, and it's not really clear
how it should behave (e.g. what should it do if a new file is played),
and wasn't all that great to begin with (what if you made a mistake?
the "edl_mark" command sucks for editing), get rid of it.
Suggestions how to reimplement this in a nicer way are welcome. If it's
just about retrieving timecodes, this in input.conf will do:
KEY print_text "position: ${=time-pos}"
This fixes a problem that happened with syncplay.pl [1] when ad_mpg123
was in use, and get_current_time() returning a bogus time position.
This only happens during seeking; the reported time is correct after the
seek is done.
The audio PTS as returned by playing_audio_pts() is simply bogus during
hr-seek. With ad_ffmpeg, it was actually set to MP_NOPTS_VALUE during
seeking, so get_current_time() did a fallback to the video PTS. However,
ad_mpg123 is different and explicitly decodes some audio when resetting
on seek (reasons why it does this unknown and uninvestigated; apparently
it's to reinit libmpg123). As a result, the audio PTS was set to the
start position of the seek (or something similar), which could be very
different from the seek target time.
This confused syncplay. It got the bogus time because it spams the
player with read commands to the "time-pos" property, so this corner
case was hit.
Fix this by making get_current_time() return the seek target time if
hr-seek is active. This should make behavior the same as before commit
3f949cf "mplayer: prefer audio PTS over video PTS for status line".
[1] http://syncplay.pl
When doing a framestep while there is no more video, nothing happened,
and audio continued to play. When advancing to the next file, the player
was paused. Fix it so that it always pauses (except on very low frame
rate video, which is yet another corner case).
We also change the meaning of framestepping a bit: in audio only mode,
framstepping unpauses for a single playloop iteration. This is probably
not useful at all, but makes the code a bit more simpler/uniform.
Just like the previous commit, this matters most for audio files with
cover art, for which this special case is the normal case.
mpctx->delay is used to control audio/video sync. If more audio than
video has been played, it grows larger, meaning A/V desync is happening.
This logic is a bit broken when video has ended, and audio is still
playing. In that case, it tries to read additional video frames from the
video decoder (because even if you don't feed new packets to the
decoder, it could still return delayed frames). For that, the code to
determine whether frames should be dropped is invoked
(check_framedrop()). This function detects that video is behind audio (mpctx-
>delay growing big),
and attempts to issue a framedrop.
Reset mpctx->delay if there's no more video.
This fixes the the frame drop display "counting up" on each playloop
iteration when playing audio files with cover art. These files are
basically audio+video files with a single video frame. When playing
these files the the corner case of having run out of video while audio
is still playing is the normal case.
Also reset mpctx->last_av_difference. This is not updated anymore if
video ends (since update_avsync() sets it, but it's not called if
video_left is false). This removes the "stuck" A/V sync value when video
ends. With audio files containing cover art we would display a
meaningless value over the duration of the whole file otherwise.
Explicitly advancing the playlist with input commands ("playlist_next")
didn't jump back to the first file, if the current file was the last on
the playlist and looping was enabled.
Fix this and make the behavior with explicit input and playback EOF the
same.
Also add a minor feature: if looping is enabled, and the current file is
the first on the playlist, going back one entry jumps to the last
playlist entry (without changing loop count).
Fixes#22.
Should be dead code. Stream selection is handled either during
demuxer initialization, or via DEMUXER_CTRL_SWITCH_*.
(If there were actually situations where this code did something, it
was probably broken anyway.)
Move things that are used by vo_xv only into vo_xv, same for vo_x11.
Rename some functions exported by x11_common, like vo_init to
vo_x11_common. Make functions not used outsode of x11_common.c private
to that file. Eliminate all global variables defined by x11_common
(except error handler and colormap stuff).
There shouldn't be any functional changes, and only code is moved
around. There are some minor simplifications in the X11 init code, as
we completely remove the ability to initialize X11 and X11+VO
separately (see commit b4d9647 "mplayer: do not create X11 state in player frontend"),
and the respective functions are conflated into vo_x11_init() and
vo_x11_uninit().
If we detect Libav, always use the old builtin vobsub decoder (in
spudec.c). Note that we do not want to use it for newer ffmpeg, as
spudec.c can't handle the vobsub packets as generated by the .idx
demuxer, and we want to get rid of spudec.c in general anyway.
Drop queued frames on seek. Reset the internal state of some filters
that seem to need it as well: at least vf_divtc still produced some
frames using the previous PTS.
This fixes weird behavior with some filters on seeking. In particular,
this could lead to A/V desync or apparent lockups due to the PTS of
filtered frames being too far away from audio PTS.
This commit does only the minimally required work to fix these PTS
related issues. Some filters have state dependent on previously filtered
frames, and these are not automatically reset with this commit (even
vf_divtc and vf_softpulldown reset the PTS info only). Filters that
actually require a full reset can implement VFCTRL_SEEK_RESET.
Format changes within a file can e.g. happen in MPEG-TS streams. This
fix also fixes encoding of such files, because ao_lavc is not capable of
reconfiguring the audio stream.
VFCAP_TIMER disables any additional waiting done by mpv in the
playloop. Remove VFCAP_TIMER, but re-use the idea for vo_image and
vo_lavc.
This means --untimed doesn't have to be passed when using --vo=image.
Change the entire filter API to use reference counted images instead
of vf_get_image().
Remove filter "direct rendering". This was useful for vf_expand and (in
rare cases) vf_sub: DR allowed these filters to pass a cropped image to
the filters before them. Then, on filtering, the image was "uncropped",
so that black bars could be added around the image without copying. This
means that in some cases, vf_expand will be slower (-vf gradfun,expand
for example).
Note that another form of DR used for in-place filters has been replaced
by simpler logic. Instead of trying to do DR, filters can check if the
image is writeable (with mp_image_is_writeable()), and do true in-place
if that's the case. This affects filters like vf_gradfun and vf_sub.
Everything has to support strides now. If something doesn't, making a
copy of the image data is required.
Ensure that even if a seek is inaccurate it will not show video from
outside the defined timeline. Previously, seeking to the beginning of
a segment could show frames from before the start of the segment if
the seek was done in inaccurate mode and the demuxer seeked to an
earlier position. Now hr-seek machinery is used to skip at least the
frames that should not be part of playback timeline at all.
Now external subtitles essentially use the playback time, instead of
the segment time.
This is more useful when using external subtitles with mkv ordered
chapters. The previous behavior is not necessarily incorrect, and e.g.
makes it easier to use subtitles directly extracted from ordered
chapters segments. But we consider the new behavior more useful.
Also see commit 06e3dc8.
This is simpler and more useful. We could add a new switch for the old
functionality, but that would probably be more confusing than helpful.
When passing only a single file to the command line, this commit
shouldn't change behavior.
(Classic mplayer provided both features by duplicating the loop
functionality in the "playtree".)
When the last frame is displayed, and a frame step command is issued,
playback ands and advances to the next file. But before this commit,
the next file was played unpause. Fix this, and make sure pause is
kept.
This is better than having just the operating system type decide the
wakeup period, as e.g. when compiling for Win32/cygwin, a wakeup period
of 0.5 would work perfectly fine.
Instead, the default wakeup period is now only decided by availability
of a working select() system call (which is the case on cygwin but not
mingw and MSVC) AND a vo that can provide an event file descriptor or a
similar hack (vo_corevideo). vos that cannot do either need polling for
event handling and now can set the wakeup period to 0.02 in the vo code.
Add `mp_find_config_file` to search different known paths and use that in
ass_mp to look for the fontconfig configuration file.
Some incidental changes spawned by this feature where:
* Buffer allocation for the strings containing the paths is now performed
with talloc. All of the allocations are done on a NULL context, but it still
improves readability of the code.
* Move the OSX function for lookup inside of a bundle: this code path was
currently not used by the bundle generated with `make osxbundle`. The plan
is to use it again in a future commit to get a fontconfig config file.
Keep the currently displayed subtitles even when the user cycles through
subtitle tracks, and the subtitle is decoded by libavcodec (such as
vobsubs). Do this by not clearing the subtitles on reset(). reset() is
also called on seek, so check the start PTS whether the subtitle should
really be displayed (there's already an end PTS). Note that sd_ass does
essentially something similar.
The existing code has checks for whether the PTS reported by the demuxer
is invalid (MP_NOPTS_VALUE). I don't know under what circumstances this
can happens, so fall back to the old behavior if the PTS is invalid.
