This is the first of a series of commits that will change the Cocoa way in a
way that is easily embeddable inside parent views. To reach that point common
code must avoid referencing the parent NSWindow since that could be the host
application's window.
--x11-netwm=yes now forces NetWM fullscreen, while --x11-netwm=auto
(detect whether NetWM fullsctreen support is available) is the old
behavior and still the default.
See #888.
Apparently this is what users want. When playing with normal speed,
nothing is done. When playing slower than normal, resampling is used
instead, because scaletempo (which does the pitch correction) adds
too many artifacts.
This would play some silence in case video was slower than audio. If
framedropping is already enabled, there's no other way to keep A/V
sync, short of changing audio playback speed (which would give worse
results). The --audiodrop option inserted silence if there was more
than 500ms desync.
This worked somewhat, but I think it was a silly idea after all. Whether
the playback experience is really bad or slightly worse doesn't really
matter. There also was a subtle bug with PTS handling, that apparently
caused A/V desync anyway at ridiculous playback speeds.
Just remove this feature; nobody is going to use it anyway.
E.g. --loop-file=2 will play the file 3 times (one time normally, and 2
repeats).
Minor syntax issue: "--loop-file 5" won't work, you have to use
"--loop-file=5". This is because "--loop-file" still has to work for
compatibility, so the "old" syntax with a space between option name and
value can't work.
It's just confusing; users are encouraged to edit input.conf instead
(changing the argument to the "add" command).
Update input.conf to keep the old behavior.
Until now, you could override only level 3 with --osd-status-msg. Extend
this, add add --osd-msg1 to --osd-msg3 (one for each OSD level). OSD
level 0 always means disable OSD, so that isn't included.
--osd-msg3 corresponds to --osd-status-msg, but they're not exactly the
same. To allow more customization, --osd-msgN do not include the OSD
symbol. The symbol can be manually added with "${osd-sym-cc}". We keep
the "old" option for some short-term compatibility.
--osd-msg1 should be particularly useful; for example you could do:
--osd-msg1='${?pause==yes:${osd-sym-cc}}'
to display a "paused" symbol when paused, and nothing during normal
playback. (Although admittedly, the syntax is quite a bit of work.)
With default settings, this allows you to hit the 100% mark (with
default --softvol-max in the middle) even if you've reached min or max
volume before. This is because 50 is not divisible by 3 (old default)
but by 2 (new default).
Not really sure why there still can be issues with higher --softvol-max
and --volstep=1, but this is where I stop caring.
The memcpy() is actually not enough: the types are incompatible, and no
memcpy, union, etc. will change that. (Although no real compiler will
ever break this.) Attempt to make this theoretically correct by actually
using a struct pointer. It's not the same struct type, but supposedly
it's ok, because all struct pointers always have the same size and
representation in standard C.
Don't worry, your ~/.config/... paths are safe. This merely removes
handling of $XDG_CONFIG_DIRS for global paths.
Maybe there is a better solution for this, like still including the
"traditional" config dir. But I will leave the fine reading of this
(crappy) spec and fixing the code accordingly to someone else. So, if
anyone has interest in getting this behavior back, you will have to
write a patch. This patch should _also_ not break expected behavior.
Fixes#1060.
--hls-bitrate=min/max lets you select the min or max bitrate. That's it.
Something more sophisticated might be possible, but is probably not even
worth the effort.
This catches a few cases which basically call:
m_property_strdup_ro(..., ..., NULL)
which would return NULL strings. This should generally be avoided
(although it's allowed due to reasons), and it seems most callers
actually intend this to mean M_PROPERTY_UNAVAILABLE.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
A (hopefully) temporary hack to make stream switching delays tolerable.
It's not clear how this should be handled (either executing a precise
seek on track switching, or always enabling all streams), so get this
issue out of the way for now by picking a rather low value.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Add the --cache-secs option, which literally overrides the value of
--demuxer-readahead-secs if the stream cache is active. The default
value is very high (10 seconds), which means it can act as network
cache.
Remove the old behavior of trying to pause once the byte cache runs
low. Instead, do something similar wit the demuxer cache. The nice
thing is that we can guess how many seconds of video it has cached,
and we can make better decisions. But for now, apply a relatively
naive heuristic: if the cache is below 0.5 secs, pause, and wait
until at least 2 secs are available.
Note that due to timestamp reordering, the estimated cached duration
of video might be inaccurate, depending on the file format. If the
file format has DTS, it's easy, otherwise the duration will seemingly
jump back and forth.
--demuxer-readahead-secs now controls how much the demuxer should
readahead by an amount of seconds. This is based on the raw packet
timestamps. It's not always very exact. For example, h264 in Matroska
does not store any linear timestamps (only PTS values which are going
to be reordered by the decoder), so this heuristic is usually off by
several hundred milliseconds.
The decision whether to readahead is basically OR-ed with the other
--demuxer-readahead-packets options. Change the manpage descriptions
to subtly convey these semantics.
Since the display FPS is currently detected on X11 only (and even there
it's known to be wrong on certain setups), it seems like a good idea to
make this user-configurable.
This mostly uses the same idea as with vo_vdpau.c, but much simplified.
On X11, it tries to get the display framerate with XF86VM, and limits
the frequency of new video frames against it. Note that this is an old
extension, and is confirmed not to work correctly with multi-monitor
setups. But we're using it because it was already around (it is also
used by vo_vdpau).
This attempts to predict the next vsync event by using the time of the
last frame and the display FPS. Even if that goes completely wrong,
the results are still relatively good.
On other systems, or if the X11 code doesn't return a display FPS, a
framerate of 1000 is assumed. This is infinite for all practical
purposes, and means that only frames which are definitely too late are
dropped. This probably has worse results, but is still useful.
"--framedrop=yes" is basically replaced with "--framedrop=decoder". The
old framedropping mode is kept around, and should perhaps be improved.
Dropping on the decoder level is still useful if decoding itself is too
slow.
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
Completely useless, and could accidentally be enabled by cycling
framedrop modes. Just get rid of it.
But still allow triggering the old code with --vd-lavc-framedrop, in
case someone asks for it. If nobody does, this new option will be
removed eventually.
The parser can be called with dst (the target) set to NULL if the option
should be verified only. The code didn't respect this, and could result
in crashes when used in config profiles or filter sub-options.
Fixes#981.
Almost nothing was left of it.
The only thing this commit actually removes is support for reading
input commands from stdin. But you can emulate this via:
--input-file=/dev/stdin --input-terminal=no
However, this won't work on Windows. Just use a named pipe.
Useful for Windows stuff. Actually, ENCA support should catch this, but,
well, whatever, everyone seems to hate ENCA.
Detection with BOM is trivial, although it needs some hackery to
integrate it with the existing autodetection support. For one, change
the default value of --sub-codepage to make this easier.
Probably fixes issue #937 (the second part).
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
Something like "char *s = ...; isdigit(s[0]);" triggers undefined
behavior, because char can be signed, and thus s[0] can be a negative
value. The is*() functions require unsigned char _or_ EOF. EOF is a
special value outside of unsigned char range, thus the argument to the
is*() functions can't be a char.
This undefined behavior can actually trigger crashes if the
implementation of these functions e.g. uses lookup tables, which are
then indexed with out-of-range values.
Replace all <ctype.h> uses with our own custom mp_is*() functions added
with misc/ctype.h. As a bonus, these functions are locale-independent.
(Although currently, we _require_ C locale for other reasons.)
Until now, the config functions added various allocations to the user-
provided talloc context. Make it so that they're all under the returned
allocation instead. This allows avoiding having to create an extra
temporary context for some callers, and also avoids adding random memory
leaks by accidentally passing a NULL context.
mp_find_all_config_files() has to be changed not to return a pointer
into the middle array for this to work. Make it add paths in order
(instead of reverse), and then reverse the array entries after that.
Also remove the declarations for the win-specific private functions.
Remove STRNULL(); it's barely needed anymore and the functions are
not called with NULL filenames anymore.
This means normally the XDG config dir will be used. But if the old
config dir (~/.mpv) exists and the XDG config dir does not, then don't
create it.
To simplify the code, also make mp_path_exists() accept NULL paths. In
that case it's considered as not existing. (Funnily, on Linux this
already worked, because the string is passed directly to the kernel,
and the kernel will just return EFAULT on invalid memory.)
Search $XDG_CONFIG_HOME and $XDG_CONFIG_DIRS for config files.
This also negates the need to have separate user and global variants of
mp_find_config_file()
Closes#864, #109.
Signed-off-by: wm4 <wm4@nowhere>
For remarks, pretty much see the manpage additions. Could help with
network streams that require too much seeking (maybe), or might be
extended to help with the use case of watching and downloading a file
at the same time.
In general, it might be a useless feature and could be removed again.
The "classic" sub-option stuff is not really needed anymore. The only
remaining use can be emulated in a simpler way. But note that this
breaks the --screenshot option (instead of the "flat" options like
--screenshot-...). This was undocumented and discouraged, so it
shouldn't affect anyone.
Instead of absuing m_option to store the property list, introduce a
separate type for properties. m_option is still used to handle data
types. The property declaration itself now never contains the option
type, and instead it's always queried with M_PROPERTY_GET_TYPE. (This
was already done with some properties, now all properties use it.)
This also fixes that the function signatures did not match the function
type with which these functions were called. They were called as:
int (*)(const m_option_t*, int, void*, void*)
but the actual function signatures were:
int (*)(m_option_t*, int, void*, MPContext *)
Two arguments were mismatched.
This adds one line per property implementation. With additional the
reordering of the parameters, this makes most of the changes in this
commit.
This means use of the min/max fields can be dropped for the flag option
type, which makes some things slightly easier. I'm also not sure if the
client API handled the case of flag not being 0 or 1 correctly, and this
change gets rid of this concern.
Also clarify the semantics.
It seems --idx didn't do anything. Possibly it used to change how the
now removed legacy demuxers like demux_avi used to behave. Or maybe
it was accidental.
--forceidx basically becomes --index=force. It's possible that new
index modes will be added in the future, so I'm keeping it
extensible, instead of e.g. creating --force-index.
Does anyone actually use this?
For now, update it, because it's the only case left where an option
points to a global variable (and not a struct offset).
Similar to previous commits.
This also renames --doubleclick-time to --input-doubleclick-time, and
--key-fifo-size to --input-key-fifo-size. We could keep the old names,
but these options are very obscure, and renaming them seems better for
consistency.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Additionally to removing the global variables, this makes the options
more uniform. --ssf-... becomes --sws-..., and --sws becomes --sws-
scaler. For --sws-scaler, use choices instead of magic integer values.
Pretty much nothing changes, but using -tv-scan with suboptions doesn't
work anymore (instead of "-tv-scan x" it's "-tv scan-x" now). Flat
options ("-tv-scan-x") stay compatible.
Basically, this allows gapless playback with similar files (including
the ordered chapter case), while still being robust in general.
The implementation is quite simplistic on purpose, in order to avoid
all the weird corner cases that can occur when creating the filter
chain. The consequence is that it might do not-gapless playback in
more cases when needed, but if that bothers you, you still can use
the normal gapless mode.
Just using "--gapless-audio" or "--gapless-audio=yes" selects the old
mode.
--sub-file is actually a string list, so you can add multipel external
subtitle files. But to be able to set a list, the option value was split
on ",". This made it impossible to add filenames.
One possible solution would be adding escaping. That's probably a good
idea (and some other options already do this), but it's also complicated
both to implement and for the user.
The simpler solution is making --sub-file appending, and make it take
only a single entry.
I'm not quite sure about this yet. It breaks the invariant that if a
value is printed and parsed, you get the same value back. So for now,
just go with the simple solution.
Fixes#840.
(The old "force" choice of that option is renamed to "force-default".)
This allows overriding native ASS script subtitle styles with the style
provided by the --sub-text-* options (like --sub-text-font etc.). This
is disabled by default, and needs to be explicitly enabled with the
--ass-style-override=force option and input property.
This uses in fact exactly the same options (--sub-text-*) and semantics
as the ones used to configure unstyled text subtitles.
It's recommended to combine this with this in the mpv config file:
ass-force-style="ScaledBorderAndShadow=1" # work around dumb libass behavior
Also, adding a key binding to toggle this behavior should be added,
because overriding can easily break:
L cycle ass-style-override
This would cycle override behavior on Shift+L and allows quickly
disabling/enabling style overrides.
Note: ASS should be considered a vector format rather than a subtitle
format. There is no easy or reliable way to determine whether the style
of a given subtitle event can be changed without destroying visuals or
not. This patch relies on a simple heuristic, which often works and
often breaks.
This simply writes the file name as a comment to the top of the watch later
config file.
It can be useful to the user for determining whether a watch later config file
can be manually removed (e.g. in case the corresponding media file has been
deleted) or not.
This accidentally rejected d==0. We can actually deal with sub-normals
fine, we just want to exclude nan and infinity (although infinity is
already accounted for, but anyway).
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
Some options change from percentages to number of kilobytes; there are
no cache options using percentages anymore.
Raise the default values. The cache is now 25000 kilobytes, although if
your connection is slow enough, the maximum is probably never reached.
(Although all the memory will still be used as seekback-cache.)
Remove the separate --audio-file-cache option, and use the cache default
settings for it.
