Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
This was accidentally completely destroyed with commit 24f1878e. I
didn't notice it when testing, because forward seeking still worked
mostly.
The issue was that dvd_seek_to_time() actually called stream_seek(),
which was supposed to call the byte-level seek function dvd_seek(). So
we have to restore this function, and replace all generic stream calls
with stream_dvd.c internal ones. This also affects stream->pos (now a
random number as far as stream_dvd.c is concerned) and stream_skip().
I hate tabs.
This replaces all tabs in all source files with spaces. The only
exception is old-makefile. The replacement was made by running the
GNU coreutils "expand" command on every file. Since the replacement was
automatic, it's possible that some formatting was destroyed (but perhaps
only if it was assuming that the end of a tab does not correspond to
aligning the end to multiples of 8 spaces).
This was broken at some unknown point (even before the recent cache
changes). There are several problems:
- stream_dvd returning a random stream position, confusing the cache
layer (cached data and stream data lost their 1:1 corrospondence by
position)
- this also confused the mechanism added with commit a9671524, which
basically triggered random seeking (although this was not the only
problem)
- demux_lavf requesting seeks in the stream layer, which resulted in
seeks in the cache or the real stream
Fix this by completely removing byte-based seeking from stream_dvd. This
already works fine for stream_dvdnav and stream_bluray. Now all these
streams do time-based seeks, and pretend to be infinite streams of data,
and the rest of the player simply doesn't care about the stream byte
positions.
Stream-level chapters (like DVD etc.) did potentially not have
timestamps for each chapter, so STREAM_CTRL_SEEK_TO_CHAPTER and
STREAM_CTRL_GET_CURRENT_CHAPTER were needed to navigate chapters. We've
switched everything to use timestamps and that seems to work, so we can
simplify the code and remove this old mechanism.
This commit makes 'disc-title' properties for DVDs start from 0.
There was an inconsistency around 'disc-title' property between
DVDs (from 1) and Blu-rays (from 0). This fixes#648.
Signed-off-by: wm4 <wm4@nowhere>
In my opinion, config.h inclusions should be kept to a minimum. MPlayer
code really liked including config.h everywhere, though, even in often
used header files. Try to reduce this.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
I have a sample where some final chapters are missing. This was causing a
segmentation fault when trying to fetch chapter times for them.
This makes the code ignore those chapters.
The way the url_options field was handled was not entirely sane: it's
actually a flexible array member, so it points to garbage for streams
which do not initialize this member (it just points to the data right
after the struct, which is garbage in theory and practice). This was
not actually a problem, since the field is only used if priv_size is
set (due to how this stuff is used). But it doesn't allow setting
priv_size only, which might be useful in some cases.
Also, make the protocols array not a fixed size array. Most stream
implementations have only 1 protocol prefix, but stream_lavf.c has
over 10 (whitelists ffmpeg protocols). The high size of the fixed
size protocol array wastes space, and it is _still_ annoying to
add new prefixes to stream_lavf (have to bump the maximum length),
so make it arbitrary length.
The two changes (plus some more cosmetic changes) arte conflated into
one, because it was annoying going over all the stream implementations.
So for example "file:///file%20name.mkv" will open "file name.mkv".
I'm not sure whether we want/need this. The old code didn't do it.
Also, it's not really clear whether this is handled correctly. It
seems the corresponding freedesktop.org "standard" allows a (useless)
hostname part, which we should skip in theory. The number of slashes
is not really clear either. We can open relative filenames (by removing
one of the slashes from the example above), which is perhaps an
unneeded feature. How does this even work with Windows paths?
This issues can probably be corrected later.
The URL unescape code is based on code from m_option.c removed with
a recent commit.
Move the URL parsing code from m_option.c to stream.c, and simplify it
dramatically. This code originates from times when http code used this,
but now it's just relict from other stream implementations reusing this
code. Remove the unused bits and simplify the rest.
stream_vcd is insane, and the priv struct is different on every
platform, so drop the URL parsing. This means you can't specify a track
anymore, only the device. (Does anyone use stream_vcd? Not like this
couldn't be fixed, but it doesn't seem worth the effort, especially
because it'd require potentially touching platform specific code.)
These were printed only with -v. Most streams had them set to useless
or redundant values, so it's just badly maintained bloat.
Since we remove the "author" field too, and since this may have
copyright implications, we add the contents of the author fields to
the file headers, except if the name is already part of the file header.
This removes the dependency on DEMUXER_TYPE_* and the file_format
parameter from the stream open functions.
Remove some of the playlist handling code. It looks like this was
needed only for loading linked mov files with demux_mov (which was
removed long ago).
Delete a minor bit of dead network-related code from stream.c as well.
This was an old leftover from an earlier cleanup (which happened in
2003), and which used "special" stuff for streams that could be only
forward-seeked.
Also, don't add mode flags to s->flags; they're supposed to be in
s->mode instead.
Of course all of stream_dvd.c (as well as libdvdread) is completely
insane, but at least this hack for ancient broken compilers on really
obscure platforms should be safe to remove.
Some code in mplayer.c did stuff like accessing (dvd_priv_t *)st->priv.
Do this indirectly by introducing STREAM_CTRL_GET_DVD_INFO. This is
extremely specific to DVD, so it's not worth abstracting this further.
This is a preparation for turning the cache into an actual stream, which
simply wraps the cached stream. There are other streams which are
accessed in the way DVD was, at least TV/radio/DVB. We assume these
can't be used with the cache. The code doesn't look thread-safe or fork
aware.
Internally, stream_dvd.c returned DEMUXER_TYPE_MPEG_PS, and the same
value was hardcoded to enforced usage of demux_lavf in demux.c. But
"-demuxer mpegps" basically did the same, so that switch was broken
for this format. Undo this and don't request a demuxer in stream_dvd.c.
demux_lavf.c is (probably) good enough to probe correctly with DVD.
Otherwise, we'd actually have to do something completely different to
force the libavformat demuxer.
Allow the stream layer to report chapter times. Extend stream_dvd to do
this. I'm not 100% sure whether the re-used code is bug-free (because it
was used for slave-mode and/or debugging only).
MAke the frontend do time-based seeks when switching DVD chapters. I'm
not sure if there's a real reason STREAM_CTRL_SEEK_TO_CHAPTER exists
(maybe/hopefully not), but we will see.
Note that querying chapter times in demuxer_chapter_time() with the new
STREAM_CTRL_GET_CHAPTER_TIME could be excessively slow, especially with
the cache enabled. The frontend likes to query chapter times very often.
Additionally, stream_dvd uses some sort of quadratic algorithm to list
times for all chapters. For this reason, we try to query all chapters on
start (after the demuxer is opened), and add the chapters to the demuxer
chapter list. demuxer_chapter_time() will get the time from that list,
instead of asking the stream layer over and over again.
This assumes stream_dvd knows the list of chapters at the start, and
also that the list of chapters never changes during playback. This
seems to be true, and the only exception, switching DVD titles, is not
supported at runtime (and doesn't need to be supported).
Will be needed to override the demuxer's start time reporting. We could
be lazy and special-case it since the result is always 0 for the streams
that care, but doing it properly is better.
DVD playback uses a demuxer that signals to the frontend that timestamp
resets are possible. This made the frontend calculate the OSD playback
position based on the byte position and the total size of the stream.
This actually broke DVD playback position display. Since DVD reports a
a linear playback position, we don't have to rely on the demuxer
reported position, so disable this functionality in case of DVD
playback. This reverts the OSD behavior with DVD to the old behavior.
The language string was dynamically allocated, which completely fails
if the cache is forked (which it usually is). Change it back to a fixed
length string, like the original code had it.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Add new stream control command STREAM_CTRL_GET_CURRENT_TITLE for DVDs.
This provides the current title (aka track) number of a DVD.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35263 b3059339-0415-0410-9bf9-f77b7e298cf2
This changes the name of this project to mpv. Most user-visible mentions
of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the
default config file location are changed as well.
The new default config file location is: ~/.mpv/
Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI,
which has been removed from mplayer2 ages ago.
We don't have a logo, and the MS Windows resource files sort-of require
one, so leave etc/mplayer.ico/.xpm as-is.
Remove the debian and rpm packaging scripts. These contained outdated
dependencies and likely were more harmful than useful. (Patches which
add working and well-tested packaging are welcome.)
Add all subtitle tracks as reported by libdvdread at playback start.
Display language for subtitle and audio tracks. This commit restores
these features to the state when demux_mpg was default for DVD playback,
and makes them work with demux_lavf and the recent changes to subtitle
selection in the frontend.
demux_mpg, which was the default demuxer for DVD playback, reordered
the subtitle streams according to the "logical" subtitle track number,
which conforms to the track layout reported by libdvdread, and is what
stream_dvd expects for the STREAM_CTRL_GET_LANG call. demux_lavf, on
the other hand, adds the streams in the order it encounters them in
the MPEG stream. It seems this order is essentially random, and can't
be mapped easily to what stream_dvd expects.
Solve this by making demux_lavf hand out the MPEG stream IDs (using the
demuxer_id field). The MPEG IDs are mapped by mplayer.c by special
casing DVD playback (map_id_from/to_demuxer() functions). This mapping
is essentially the same what demux_mpg did. Making demux_lavf reorder
the streams is out of the question, because its stream handling is
already messy enough.
(Note that demux_lavf doesn't export stream IDs for other formats,
because most time libavformat demuxers do not set AVStream.id, and we
don't know which demuxers do. But we know that MPEG is safe.)
Another major complication is that subtitle tracks are added lazily, as
soon as the demuxer encounters the first subtitle packet for a given
subtitle stream. Add the streams in advance. If a yet non-existent
stream is selected, demux_lavf must be made to auto-select that subtitle
stream as soon as it is added. Otherwise, the first subtitle packet
would be lost. This is done by DEMUXER_CTRL_PRESELECT_SUBTITLE.
demux_mpg didn't need this: the frontend code could just set ds->id to
the desired stream number. But demux_lavf's stream IDs don't map
directly to the stream number as used by libdvdread, which is why this
hack is needed.
Code cleanup: Use a stream_control instead of global functions to
get the language associate with a audio or subtitle stream from
the streaming layer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34736 b3059339-0415-0410-9bf9-f77b7e298cf2
Support showing the stream language with br:// playback.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34737 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix DVDs showing the subtitle language as "unknown"
for a long time.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34777 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Note: heavily modified by wm4 for this fork of mplayer.
This provides the total number of titles (aka tracks) of CDs / VCDs / DVDs.
Additionally, add a titles property to the get_property slave command.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34474 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: ib
Fix dvd_get_current_time so the cell argument actually has a purpose.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33603 b3059339-0415-0410-9bf9-f77b7e298cf2
There is no reason to use manual language list splitting when an
automatic split function is already available.
Some types change from "unsigned char" to "char", but this shouldn't
cause issues since [as]lang settings are unlikely to have characters
above 127.
Fix dvd:// fill_buffer function to actually write into the specified
buffer and check that the buffer is sufficiently large.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32591 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32592 b3059339-0415-0410-9bf9-f77b7e298cf2
The current code takes the angle into account. This is a mistake since
the position is independent of the angle.
patch by Olivier Rolland, billl users.sourceforge net
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31895 b3059339-0415-0410-9bf9-f77b7e298cf2
Martin Herkt
wm4
xylosper
Stefano Pigozzi
Rudolf Polzer
ib
mplayer-svn
reimar
Clément Bœsch
cigaes
diego