Instead, add a hacky OPT_ASPECT option type, which only exists to accept
a "no" parameter, which in combination with the "--no-..." handling code
makes --no-video-aspect work again.
We can also remove the code in m_config.c, which only existed to make
"--no-aspect" (a deprecated alias) to work.
OPT_ALIAS redirects the options at a higher level, instead of
introducing "duplicate" options with different name but same backing
storage. This uses the OPT_REPLACED mechanisms - only the deprecation
warning had to be made conditional. Note that e.g. --no-video still
works, because the "--no-..." redirection and OPT_ALIAS are orthogonal.
The deprecated --sub -> --sub-file alias had to be dropped, because it
essentially conflicts with --no-sub. If anyone complains, this could
probably still be undone by letting m_config_find_negation_opt do a
special mapping for --no-sub. (Which would be dumb, but simple and
effective.)
This is basically dead code, and even the commit that added this code 4
years ago said that this should be for debugging only.
(Though it is possible that the clamp callback was used for something
else, and then unused again. Also, some of the clamping code remains and
is used for internal checking, e.g. clamp_double().)
It's actually redundant with whether m_option_type.free is set. Some
option types were flagged inconsistently. Its only use was for running
an additional sanity check without any real functionality.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
We have a warning mechanism for removed and for replaced options, but
none yet for options which have been simply deprecated.
For the following commit.
(Fun fact: just adding the m_option field increases binary size by
14KB.)
If a mpv_node wrapped a string, the behavior was different from calling
mpv_set_property() with MPV_FORMAT_STRING directly. Change this.
The original intention was to be strict about types if MPV_FORMAT_NODE
is used. But I think the result was less than ideal, and the same change
towards less strict behavior was made to mpv_set_option() ages ago.
Update msg.c state immediately if a terminal or logging setting is set.
Until now, this was delayed until mp[v]_initialize() was called. When
using the client API, you could easily miss logged error messages, even
when logging was initialized early on by calling
mpv_request_log_messages().
(Properties can't be used for this either, because properties do not
work before mpv_initialize().)
Use OPT_CHOICE_C() instead of the custom parser. The functionality is
pretty much equivalent.
(On a side note, it seems --video-stereo-mode can't be removed, because
it controls whether to "reduce" stereo video to mono, which is also the
default. In fact I'm not sure how this should be handled at all.)
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
In the past it happened quite often that flag options (yes/no) were
changed to choice options (yes/no/some more). The problem with this was
that while flag options don't need a parameter, this wasn't the case
with choice options. A hack was introduced to compensate for this:
setting M_OPT_OPTIONAL_PARAM on the option, and an empty string ("") was
added as choice, so that the choice could be used like a flag. So, for
example, "--mute" would set the choice "".
Fix this by 1. not requiring a parameter if there's a "yes" choice, and
2. redirect an empty parameter to "yes". The effect is that a choice
option with the choices ["yes", "no"] is pretty much equivalent to a
flag option.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
The "classic" sub-option stuff is not really needed anymore. The only
remaining use can be emulated in a simpler way. But note that this
breaks the --screenshot option (instead of the "flat" options like
--screenshot-...). This was undocumented and discouraged, so it
shouldn't affect anyone.
This means use of the min/max fields can be dropped for the flag option
type, which makes some things slightly easier. I'm also not sure if the
client API handled the case of flag not being 0 or 1 correctly, and this
change gets rid of this concern.
--sub-file is actually a string list, so you can add multipel external
subtitle files. But to be able to set a list, the option value was split
on ",". This made it impossible to add filenames.
One possible solution would be adding escaping. That's probably a good
idea (and some other options already do this), but it's also complicated
both to implement and for the user.
The simpler solution is making --sub-file appending, and make it take
only a single entry.
I'm not quite sure about this yet. It breaks the invariant that if a
value is printed and parsed, you get the same value back. So for now,
just go with the simple solution.
Fixes#840.
m_option is basically the mechanism to handle C data types in a dynamic
way. Add functions to convert values to and from mpv_node. For example,
string lists are turned into mpv_node using MPV_FORMAT_NODE_ARRAY, and
so on.
M_OPT_PARSE_ESCAPES was pretty stupid, and broke the (useful) assumption
that string variables contain exactly the same value as set by the
option. Simplify it, and move escape handling to the place where it's
used.
Escape handling itself is not terribly useful, but still allows useful
things like multiline custom OSD with "\n".
Always pass around mp_log contexts in the option parser code. This of
course affects all users of this API as well.
In stream.c, pass a mp_null_log, because we can't do it properly yet.
This will be fixed later.
Basically, reimplement --msglevel. Instead of making the new msg code
use the legacy code, make the legacy code use the reimplemented
functionality.
The handling of the deprecated --identify switch changes. It temporarily
stops working; this will be fixed in later commits.
The actual sub-options syntax (like --msglevel-vo=...) goes away, but I
bet nobody knew about this or used this anyway.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
wm4
stepshal
Marcin Kurczewski
Alessandro Ghedini
Tsukasa OMOTO