Instead of printing lines like:
Demuxer info GENRE changed to Alternative Rock
Just output all tags once they change. The assumption is that individual
tags rarely change, while all tags change in the common case.
This changes tag updates to use polling. This could be fixed later,
although the ICY stuff makes it a bit painful, so maybe it will remain
this way.
Also remove DEMUXER_CTRL_UPDATE_INFO. This was intended to check for tag
updates, but now we use a different approach.
Use an arbitrary constant instead, which is as good as PATH_MAX.
This helps us to avoid having to think about pull request #523.
Also fix a case where a potentially signed char was passed to isspace().
This used to work; I'm not sure when or why it regressed. When setting
AVProbeData.filename to NULL, libavformat will crash in rtp_probe() by
unconditionally accessing the string.
We used to set the filename to NULL to prevent probing by file extension
when we don't deem it as necessary. Using an empty string also works for
this purpose.
This generally affects mp3 files that don't have any (or many) mp3
frames in the first 2 MB. 2 MB is the maximum probe size, and
libavformat returns a low probescore even if we give it the full 2 MB.
Trying to probe a larger buffer (or even the full file) doesn't work for
mysterious reasons.
The workaround consists in accepting a very weak probescore if the
format is detected as mp3 and we probed already 2 MB.
Restructure it a bit, so we can use the format hack list even if no mime
type applies. Shouldn't change anything functionally yet. Preparation
for the next commit.
If there's more than one edition, print the list of editions, including
the edition name, whether the edition is selected, whether the edition
is default, and the command line option to select the edition. (Similar
to stream list.)
Move reading the tags to a separate function process_tags(), which is
called when all other state is parsed. Otherwise, that tags will be lost
if chapters are read after the tags.
Pretty worthless. This is called from the seek code, which will
reinitialize these anyway. Even if seeking somehow decides to fail, the
new values are still valid.
One could say a failed seek (if that happens) should jump back to the
original position, and thus it would be better to make sure the state
is restored. But then demux_mkv_seek needs to do this correctly,
including not setting up skipping to the target timestamp. But not
bothering with this.
Extremely obscure corner case with concatenated segments, in which EOF
wasn't recognized correctly, and it tried to demux clusters from the
next segment.
See [MKV]_Editions,_Linked_Segments,_&_Tracksets.mkv from the CCCP test
file collection.
This basically used to be part of the user interface, before mpv moved
printing the track list to the frontend, and this code was raised to
verbose output level.
For some reason, if an error happened when reading headers, it merely
stopped reading the headers, and then continued normally. (It looks like
the case to exit hard (-2) was mainly used for skipping unwanted ordered
chapter segments.)
I can't comprehend this. Always exit on error when reading headers.
(Maybe some more error tolerance would be good, but I have no test case,
and there's some danger of entering endless loops.)
This makes everything more robust, and also somewhat simpler (even if
the diffstat isn't very impressive).
Instead of recursively following SeekHeads while reading headers, just
read the headers until the first cluster, and then possibly use
SeekHeads to read the remaining missing headers.
As of this commit, stream_read_line() can't actually error (except in
the case the passed in buffer is 0, which never happens here). This
commit is preparation for the following commit, which checks harder
whether the read data is actually text. Before this commit, an error
was treated as end-of-file, but the data read so far was considered
valid.
Many ebml_read_* functions have a length int pointer parameter, which
returns the number of bytes skipped. Nothing actually needed this
(anymore), and code using it was rather hard to understand, so get rid
of them.
Matroska makes it pretty hard to resync correctly on broken files:
random data returns "valid" EBML IDs with a high probability, and when
trying to skip them it's likely that you skip a random amount of data
(instead of considering the element length invalid).
Improve upon this by skipping known level 1 elements only. Consider
everything else invalid and call the resync code. This might result in
annoying behavior when Matroska adds new level 1 elements, although it
won't be particularly harmful. Matroska doesn't really allow us to do
better (even mkvtoolnix explicitly checks for known level 1 elements).
Since we now don't always want to combine EBML element skipping and
resyncing, remove ebml_read_skip_or_resync_cluster(), and make
ebml_read_skip() more tolerant against skipping broken elements.
Also, don't resync when reading sub-elements, and instead do resyncing
when reading them results in an error.
Until now, corrupted files were detected if the size of an element (that
should be skipped) was larger than the remaining file. This still could
skip larger regions of the file itself if the broken size happened to be
within the file.
Change it so that it's never allowed to skip outside the parent's
element.
MicroDVD files _can_ contain real timestamps instead of frame timestamps
if they declare a FPS. But this seems to be rare, so ignore that if the
FPS happens to match with the libavformat microdvd parser's default FPS.
This might actually break files that declare 23.976 FPS, but the video
file is not 23.976 FPS, but the chance that this happens is probably
very low, and the commit fixes the more common breakage with 25 FPS
video.
demux_subreader.c contains the old MPlayer subtitle parser, and I have
absolutely no confidence in this (very crappy) code. There might be
one or two security risks associated with running that code on
arbitrary input.
Apparently, Matroska packs TrueHD packets in a way lavc doesn't expect.
This broke decoding of some files [1] completely. A short look at the
libavcodec parser shows that parsing this ourselves would probably be
too much work, so make use of the libavcodec parser API.
[1] http://www.cccp-project.net/beta/test_files/mzero_truehd_sample.mkv
The TV code pretends to be part of stream/, but it's actually demuxer
code too. The audio_in code is shared between the TV code and
stream_radio.c, so stream_radio.c needs a small hack until stream.c is
converted.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
The end of the current segment will be the end of the file if there is
no next segment. Normally, this didn't matter much, since UNIX files
allow seeking past the end of the file. But when opening files from
HTTP, this would print confusing error messages. So explicitly check for
EOF before trying to read a segment.
This readds a more or less completely new dvdnav implementation, though
it's based on the code from before commit 41fbcee. Note that this is
rather basic, and might be broken or not quite usable in many cases.
Most importantly, navigation highlights are not correctly implemented.
This would require changes in the FFmpeg dvdsub decoder (to apply a
different internal CLUT), so supporting it is not really possible right
now. And in fact, I don't think I ever want to support it, because it's
a very small gain for a lot of work. Instead, mpv will display fake
highlights, which are an approximate bounding box around the real
highlights.
Some things like mouse input or switching audio/subtitles stream using
the dvdnav VM are not supported.
Might be quite fragile on transitions: if dvdnav initiates a transition,
and doesn't give us enough mpeg data to initialize video playback, the
player will just quit.
This is added only because some users seem to want it. I don't intend to
make mpv a good DVD player, so the very basic minimum will have to do.
How about you just convert your DVD to proper video files?
There are 3 users of the image format option type: demux_raw,
vf_format, vf_noformat. Allow the hwaccel formats (like vdpau etc.)
in general, so that the filters can use it. This won't work for
demux_raw, so explicitly reject these formats there.
So, FFmpeg/Libav requires us to figure out video timestamps ourselves
(see last 10 commits or so), but the methods it provides for this aren't
even sufficient. In particular, everything that uses AVI-style DTS (avi,
vfw-muxed mkv, possibly mpeg4-in-ogm) with a codec that has an internal
frame delay is broken. In this case, libavcodec will shift the packet-
to-image correspondence by the codec delay, meaning that with a delay=1,
the first AVFrame.pkt_dts is not 0, but that of the second packet. All
timestamps will appear shifted. The start time (e.g. the time displayed
when doing "mpv file.avi --pause") will not be exactly 0.
(According to Libav developers, this is how it's supposed to work; just
that the first DTS values are normally negative with formats that use
DTS "properly". Who cares if it doesn't work at all with very common
video formats? There's no indication that they'll fix this soon,
either. An elegant workaround is missing too.)
Add a hack to re-enable the old PTS code for AVI and vfw-muxed MKV.
Since these timestamps are not reorderd, we wouldn't need to sort them,
but it's less code this way (and possibly more robust, should a demuxer
unexpectedly output PTS).
The original intention of all the timestamp changes recently was
actually to get rid of demuxer-specific hacks and the old timestamp
sorting code, but it looks like this didn't work out. Yet another case
where trying to replace native MPlayer functionality with FFmpeg/Libav
led to disadvantages and bugs. (Note that the old PTS sorting code
doesn't and can't handle frame dropping correctly, though.)
Bug reports:
https://trac.ffmpeg.org/ticket/3178https://bugzilla.libav.org/show_bug.cgi?id=600
This was broken by the recent commits. Apparently realvideo timestamps
are severely mangled, and Matroska _of course_ doesn't have the sane,
umangled timestamps, but something unusable. The existing unmangling
code in demux_mkv.c didn't output proper timestamps either. Instead,
it was something weird that triggered sorting. Without sorting (it was
disabled by default recently), you'd get decreasing PTS warnings
In order to fix this, steal some code from libavcodec. Basically copy
the contents of rv34_parser.c (with some changes), which makes
everything magically work. (Maybe it would be better to use the
libavcodec parser API, but I don't want to do that just for this. An
alternative idea would be refusing to read files that have realvideo
tracks, and delegate this to demux_lavf.c, but maybe that's too redical
too.)
I wish I hadn't notice this...
These packets have to be explicitly dropped, because usually libavcodec
uses 0-sized packets to flush delayed frames, meaning just passing
through these packets would have bad consequences.
Normally, libavformat doesn't output 0-sized packets anyway. But I don't
want to take any chances, so don't delete it, and just move it out of
the way to demux.c.
It appears PTS sorting was useful only for avi files (and VfW-muxed
mkv). Maybe it was historically also important for decoders with broken
or non-existent PTS reordering (win32 codecs?). But now that we handle
demuxers which outputs DTS only correctly, it just seems dead weight.
Disable it by default. The --pts-association-mode option is now forced
to always use the decoder's PTS value. You can still enable the old
default (auto) or force sorting. But we will probably remove this option
entirely at some point.
Make demux_mkv export timestamps at DTS when it's in VfW mode. This is
needed to get correct timestamps with the new default mode. demux_lavf
already does that.
This was needed to determine PTS from DTS, but the previous commits
make it unnecessary.
The builtin genpts hack was used for DVD, because libavformat's genpts
essentially went amok on DVD timestamp resets. See commit 65d87091 for
details.
Having the DTS directly can be useful for restoring PTS values.
The avi file format doesn't actually store PTS values, just DTS. An
older hack explicitly exported the DTS as PTS (ignoring the [I assume]
genpts generated non-sense PTS), which is not necessary anymore due to
this change.
