Add dummy -shuffle and -noshuffle options so they appear in
-list-options output. These features are not implemented as options;
rather they're features of the command line parser.
Also add the CONF_NOCFG flag to the existing playlist option, which is
a similar placeholder for a command line parser feature.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33147 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33148 b3059339-0415-0410-9bf9-f77b7e298cf2
Add option -osd-fractions which enables display of fractional seconds
when showing the current playback time on OSD.
Based on a patch from Christian <herr.mitterlehner@gsmpaaiml.com> but
with several modifications.
The resulting semantics of this flag are weird enough that they're
unlikely to be what is wanted in any situation. Remove the flag and
convert the two options using it, -screenw and -screenh, to use
CONF_NOSAVE instead. I'm not sure why those specific options had the
flag and if any flag is really needed, but I don't want to check in
detail now and using CONF_NOSAVE should keep about the same behavior
in practice.
A bit more detail about the weird behavior this flag had:
When not using file groups, the flag had the same behavior as
CONF_NOSAVE, namely that when switching files the option would not be
reset to the global value (only possible file-specific settings were
applied). When using file groups, group-specific options would apply
to the _first two_ files in the group, but for the rest after the
first two, settings would not be reset when changing files (wtf?).
This was a result of the following sequence:
1) push higher-level settings, enter group
2) apply group-specific settings
3) push settings before applying ones specific to file 1 in group
4) apply file 1 settings, play file 1
5) pop settings to return to group settings
6) push settings before applying ones specific to file 2
7) apply file 2 settings
8) pop settings
Here the option was set at 2). 3) saved it because it had been set
after last push, so 5) restored the setting and it was used for file 2
too. However 6) no longer saved it because there had been pushes after
the original setting in 2), thus 8) no longer restored the setting and
the option was no longer forced to any particular value when playing
further files after that.
Most of the time users want to keep current fullscreen state when
switching to another file, rather than always resetting to the global
default that was determined when the command line was parsed. Add the
CONF_NOSAVE flag to the -fs option to achieve this. The change means
that the fullscreen state from the previous file is kept unless there
is an explicit file-specific -fs or -nofs setting for the new file
(or in case file groups are used, moving to the new file enters a
group with explicitly specified state).
vo_zr was the last user of the "func_full" option type. I think it's
better if future features are implemented using more straightforward
option functionality. Delete the func_full implementation.
There were multiple files specific to Zoran support, and they also
depended on internal FFmpeg headers (so it would probably have been
hard to get them to compile now even if you tried). It's obsolete now,
so just drop the whole mess.
dxr2 support had been broken quite a while and nobody noticed. There
were finally commits to fix it in the svn repo, but rather than apply
those I'll just drop dxr2 support.
By now VIDIX is too obscure to justify the amount of code and
complexity it requires in the sources. Although there is no pressing
need to drop it just now from a code point of view, I'll rather remove
it before release than release with VIDIX support and then drop it
later.
Some of the manpage mentions of VIDIX were in "this option supported
for these VOs" lists that looked outdated and failed to mention vdpau
for example. Replace such incorrect lists with a generic "not
supported for all VOs" mention.
* sub:
sub/OSD: move some related files to sub/
subtitles: options: enable -ass by default
subtitles: change default libass rendering style
demux_mkv, chapters: change millisecond arithmetic to ns
cleanup: rename ass_* functions to mp_ass_*
subs: use correct font aspect ratio for libass + converted subs
cleanup: some random minor code simplification and cleanup
vf_vo: fix EOSD change detection bug
sd_ass: remove subreader use, support plaintext markup
subtitles: style support for common SubRip tags and MicroDVD
core: ordered chapters: fix bad subtitle parameter
subs/demux: don't try to enable sub track when creating it
subtitles/demux: store duration instead of endpts in demux packets
subtitles: add framework for subtitle decoders
options: add special -leak-report option
subtitles: remove code trying to handle text subs with libavcodec
cleanup: move MP_NOPTS_VALUE definition to mpcommon.h
subtitles: move global ass_track to struct osd_state
core: move most mpcommon.c contents to mplayer.c
core: move global "subdata" and "vo_sub_last" to mpctx
subtitles: remove sub_last_pts hack
options: move -noconfig to option struct, simplify
Add a special option "-leak-report" that enables talloc leak
reporting. It only works if it's given as the first argument.
The code abuses the CONF_TYPE_PRINT option type to make main option
parsing ignore the option. The parser incorrectly consumed the
following commandline argument as a "parameter" for options of this
type when they had the flag to not exit after printing the message.
Fix this. It makes no difference for any previously existing option I
think.
Add support for seeking to an arbitrary non-keyframe position by
decoding video starting from the previous keyframe. Whether to use
this functionality when seeking is controlled by the new option
-hr-seek and a new third argument to the "seek" command. The default
is to use it for absolute seeks (like chapter seeks) but not for
relative ones. Because there's currently no support for cutting
encoded audio some desync is expected if encoded audio passthrough is
used. Currently precise seeks always go to the first frame with
timestamp equal to or greater than the target position; there's no
support for "matching or earlier" backwards seeks at frame level.
Add a "choice" option type. Options of this type take a string as
input and set an int option variable to the value corresponding to the
string. The string->int mapping is option-specific and is given in the
option definition. Strings not found in the mapping are rejected as
invalid option values.
Change the option -pts-association-mode to use this new option type
and accept values "auto, decoder, sort" instead of "0, 1, 2". The
change in accepted values shouldn't cause problems as this option is
not appropriate to use in normal user config files.
Some Matroska files have inaccurate ordered chapter endpoints, and so
parts where one chapter should end and the next begin at the same
timestamp were not merged. This resulted in an unnecessary seek over a
minimal distance. Add a heuristic to merge parts with a minimal gap or
overlap between them.
Based on patch by Hector Martin <hector@marcansoft.com>.
Add code to enforce matching pts with video when (re)starting the
audio stream, by either cutting away the first samples or inserting
silence at the beginning. New option -noinitial-audio-sync can be used
to disable this and return to old behavior.
If the option is enabled and all audio has been buffered to the AO,
then the player will move to the next file without waiting for the
buffered audio to drain, while leaving the AO initialized. If the
playback of the next file starts quickly enough (before the AO buffer
empties) then it should continue writing audio to the same AO with no
gap in between.
If a specified key is pressed during playback, the current stream is
captured to a file, similar to what -dumpstream achieves.
original patch by Pásztor Szilárd, don tricon hu
Taken from the following svn commits, but with several fixes and
modifications (one obvious user-visible difference is that the default
key binding is 'C', not 'c'):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32524 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32529 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32530 b3059339-0415-0410-9bf9-f77b7e298cf2
The DIRECTFBVERSION macro that it depends on has been removed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32281 b3059339-0415-0410-9bf9-f77b7e298cf2
This solution works just as well, but avoids a separate template file
that needs to be #included from multiple places. The end result is
simpler since common options and those of MPlayer and MEncoder are now
in only one file each.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31434 b3059339-0415-0410-9bf9-f77b7e298cf2
Add a mode where libavcodec's reordered_opaque feature is used to
associate container packet timestamps with decoded frames. This should
improve behavior at least for MPEG files with interlaced h264; the
previous code does not cope well with the libavformat demuxer
producing two field packets with separate timestamps but the
libavcodec h264 decoder only producing a single output frame for those
two packets (so half the timestamps have no associated output frame).
The current libavformat mpeg demuxer seems to finally work with
interlaced h264 files and produce valid timestamps which are useful
with a mode like this.
By default MPlayer now selects between this new mode and the old one
automatically based on the number of timestamp problems they cause; by
default the new mode is used if both seem to work. The new option
-pts-association-mode can be used to force a particular mode. If
correct-pts mode is disabled this has no effect on timing.
Also remove the "EXPERIMENTAL" marker from the manpage description of
-correct-pts.
The GUI is badly designed and too closely coupled to the internal
details of other code. The GUI code is in bad shape and unmaintained
for years. There is no indication that anyone would maintain it in the
future either. Even if someone did volunteer to implement a better
integrated GUI having the current code in the tree probably wouldn't
help much. So get rid of it.
