ATSC is a mix of terrestrial and cable,
and depending on modulation is actually using
DVBC_ANNEX_B. Thus, we need to override the delivery
system depending on the modulation, channel by channel.
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Dump the complete raw tuning commands to allow for debugging
on low level.
Also, remove code duplication and some variable shadowing.
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Also, in case tuning fails with timeout even though the ioctl
was accepted by the device, fall back to DVBv3 tuning.
This may go wrong for multi-delivery-system cards,
so issue an error message in that case.
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Probably does much more:
+ add support DVB-T2
* DVB params set to AUTO by default
* MAX_CARDS: 4 -> 16
* DMX_SET_BUFFER_SIZE: 64kb -> 256kb
+ add DTV_CLEAR call before tune
+ add logic from https://github.com/olifre/mpv/commits/dvb-mixed-api-scan
* rename type to delsys
* single playlist per adapter
* card -> adapter
* fix channels order in playlist
* update internal api
* auto fallback to old DVB API on tune
* fix DELSYS_SUPP_MASK value
* remove tone - unused
* add channel mem zeroize in config parser
+ add code from libdvbv5 for detect delivery systems
* SYS_DVBC_ANNEX_AC replaced to SYS_DVBC_ANNEX_A + SYS_DVBC_ANNEX_C
Signed-off-by: wm4 <wm4@nowhere>
This reverts commit df91e492fd.
Multiple issues such as weird code with undefined behavior (like
(like conf_file*). The PR wasn't properly reviewed anyway (my error),
so this commit should be reviewed and then merged again.
Probably does much more:
+ add support DVB-T2
* DVB params set to AUTO by default
* MAX_CARDS: 4 -> 16
* DMX_SET_BUFFER_SIZE: 64kb -> 256kb
+ add DTV_CLEAR call before tune
+ add logic from https://github.com/olifre/mpv/commits/dvb-mixed-api-scan
* rename type to delsys
* single playlist per adapter
* card -> adapter
* fix channels order in playlist
* update internal api
* auto fallback to old DVB API on tune
* fix DELSYS_SUPP_MASK value
* remove tone - unused
* add channel mem zeroize in config parser
+ add code from libdvbv5 for detect delivery systems
* SYS_DVBC_ANNEX_AC replaced to SYS_DVBC_ANNEX_A + SYS_DVBC_ANNEX_C
Signed-off-by: wm4 <wm4@nowhere>
Using the new API is a necessity for multiple-delivery-system
devices, since the old API does not offer a way to switch
the delivery system of the card.
This should in principle also be done for DVB-T / ATSC,
especially since most DVB-T devices also support DVB-C,
but I can not test such an implementation due to lack of hardware
(currently) so it seems better to leave the existing, tested code-path
in place for now.
No need use use all capital letters, and don't warn
if DVB-S2 is supported in addition since we handle that
in DVB-S case already.
Also, print the delivery system number for still unhandled
delivery systems to simplify debugging.
Saves one unnecessary additional ioctl per tuning
by just reusing existing information.
Should also fix the case of multiple supported delivery types
since we now rely on the initial query from the chosen
configuration after channel list parsing
instead of requerying the device.
Most common case would be DVB-C / DVB-T combination cards.
Cards with multiple delivery systems are only supported
starting from DVBv5 API (Kernel 2.6.38).
In this case, we loop over all delivery systems and
just treat them as different cards would be treated:
They all get their own TUNER-type, channel-list parsing etc.
The state-struct now contains everything which can be kept after initial initialization.
This includes the channel-lists, configuration, device-fds and also information like
current channel and current card.
The dvb_priv_t is kept containing the mp-options, a pointer to the state and to the logger.
After this restructuring, the state-struct contains all information which can be persisted
across channel switching.
If VDR-channel-config is used, we know the service_id.
Using that, PMT can be extracted from PAT (code for that
inspired by szap-s2 again).
For this, we need to demux PAT with a special filter-setup,
and once PMT was found it can be added to the PID-list.
PMT is only resolved the first time one tunes to a channel,
then stored in the channel-list in memory.
With PMT available, ffmpeg can safely decode the teletext-pids.
Now also "stream ID" (for DVB-S2) and "inversion" are understood.
The parameter-string can also provide information on FEC, rolloff etc. For DVB-S, "auto" which mpv uses by default should be fine, I can also confirm it works. For non-DVB-S cards, it might be useful to also parse this information in case of a vdr-channel list.
As I have no such hardware and thus would have to do it blindly, I added a FIXME.
Mostly complete vdr-channels.conf format documentation is at http://www.vdr-wiki.de/wiki/index.php/Channels.conf (german only).
It contains now also a boolean which tells whether this is an DVB-S2 channel (not initialized yet - tbd in next commit).
We could also pass through the type of the delivery system (would be more flexible), but the delivery-system-enum is only available with S2API, so this is more backwards-compatible.
If someone has DVB-T2 / DVB-C2 hardware and extends the code to deal with it, this should be changed.
Also allows demuxers to buffer, and we explicitly discard stale QPSK events.
Inspiration taken from the szap-s2 implementation.
S2API is only used if available and for DVB-S cards - it might also be useful to have that for DVB-T2 / DVB-C2 tuning later, but I do not have the HW / no DVB-T2 broadcasting station nearby to test functionality.
This should do no functional changes, only usage of the different API. The S2API is more extensible and a requirement for all the HD-deliveries (e.g. DVB-S2) and since 2.6.28 is the successor of the old API.
Tuning to DVB-S2 channels actually already "works" like this if the delivery is hardcoded in - for a fully working implementation, the channels.conf.sat would need an additional field indicating the delivery type (VDR-type channels.conf have that).
This commit also:
- Cleans up some debug output.
- Moves an unneeded usleep(100000) (only needed for diseqc switching for SAT) into the DVB-S-only part of the implementation.
Something like "char *s = ...; isdigit(s[0]);" triggers undefined
behavior, because char can be signed, and thus s[0] can be a negative
value. The is*() functions require unsigned char _or_ EOF. EOF is a
special value outside of unsigned char range, thus the argument to the
is*() functions can't be a char.
This undefined behavior can actually trigger crashes if the
implementation of these functions e.g. uses lookup tables, which are
then indexed with out-of-range values.
Replace all <ctype.h> uses with our own custom mp_is*() functions added
with misc/ctype.h. As a bonus, these functions are locale-independent.
(Although currently, we _require_ C locale for other reasons.)
I hate tabs.
This replaces all tabs in all source files with spaces. The only
exception is old-makefile. The replacement was made by running the
GNU coreutils "expand" command on every file. Since the replacement was
automatic, it's possible that some formatting was destroyed (but perhaps
only if it was assuming that the end of a tab does not correspond to
aligning the end to multiples of 8 spaces).
This is needed so that new processes (created with fork+exec) don't
inherit open files, which can be important for a number of reasons.
Since O_CLOEXEC is relatively new (POSIX.1-2008, before that Linux
specific), we #define it to 0 in io.h to prevent compilation errors on
older/crappy systems. At least this is the plan.
input.c creates a pipe. For that, add a mp_set_cloexec() function (which
is based on Weston's code in vo_wayland.c, but more correct). We could
use pipe2() instead, but that is Linux specific. Technically, we have a
race condition, but it won't matter.
These were found by the cppcheck and scan-build static analyzers. Most
of these aren't interesting (the 2 previous commits fix some interesting
cases found by these analyzers), and they don't nearly fix all warnings.
(Most of the unfixed warnings are spam, things MPlayer never cared
about, or false positives.)
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
