Seems like most code dealing with this was for setting it in redundant
cases. Now SEEK_BACKWARD is redundant, and SEEK_FORWARD is the odd one
out.
Also fix that SEEK_FORWARD was not correctly unset in try_seek_cache().
In demux_mkv_seek(), make the arbitrary decision that a video stream is
not required for the subtitle prefetch logic to be active. We might want
subtitles with long duration even with audio only playback, or if the
file is used as external subtitle.
This improves upon the previous commit, and partially rewrites it (and
other code). It does:
- disable the seeking within cache by default, and add an option to
control it
- mess with the buffer estimation reporting code, which will most likely
lead to funny regressions even if the new features are not enabled
- add a back buffer to the packet cache
- enhance the seek code so you can seek into the back buffer
- unnecessarily change a bunch of other stuff for no reason
- fuck up everything and vomit ponies and rainbows
This should actually be pretty usable. One thing we should add are some
properties to report the proper buffer state. Then the OSC could show a
nice buffer range. Also configuration of the buffers could be made
simpler. Once this has been tested enough, it can be enabled by default,
and might replace the stream cache's byte ringbuffer.
In addition it may or may not be possible to keep other buffer ranges
when seeking outside of the current range, but that would be much more
complex.
More the ignore_eof field to the internal demux_stream struct. This is
relatively messy, because the internal struct exists only once the
stream is created, and after that setting the ignore_eof flag is a race
condition. We could bother with adding demux_add_sh_stream() parameters
for this, but let's not. So in theory a tiny race condition is
introduced, which can never be triggered since all demux API functions
are called by the playback thread only anyway.
Fix that ts_offset is accessed without log (this was introduced much
earlier by myself).
Introduce an alternative way of avoiding the annoying EOF reached
messages by not resetting the EOF flags for CC streams when a CC packet
is added. This makes the second commit in the PR which added the
original fix unnecessary.
As another cosmetic change merge the check in cached_demux_control()
into a single if().
In the future, the CC pseudo-stream should probably be replaced with an
entire pseudo-demuxer or such, which would avoid some of the messiness
(or maybe not, we don't know yet).
As usual, the history of these files is a bit murky. It starts with the
initial commit. (At which some development had already been done,
according to the AUTHORS and ChangeLog files at the time, we should be
but covered with relicensing agreements, though.) then it goes on with
complete lack of modularization, which was cleaned up later (cd68e161).
As usual, we don't consider the copyright of the stuff that has been
moved out cleanly.
There were also contributions to generic code by people who could not be
reached or who did not agree to the relicensing, but this was all
removed.
The only patches that we could not relicense and which were still in the
current code in some form are from Dénes Balatoni: 422b0d2a, 32937181.
We could not reach him, so commits f34e1a0d and 18905298 remove his
additions. It still leaves the demux_control() declaration itself, but
we don't consider it copyrightable. It's basically an idiom that existed
in MPlayer before that change, applied to the demuxer struct. (We even
went as far as making sure to remove all DEMUXER_CTRLs the original
author added.)
Commit be54f481 might be a bit of a corner case, but this was rewritten,
and we consider the old copyright removed long ago.
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
This is more uniform, and potentially gets rid of some past copyrights.
It might be that this subtly changes caching behavior (it seems before
this, it synced to the demuxer if the length was unknown, which is not
what we want.)
It's all explained in the DOCS changes. Although this option was always
kind of obscure and pointless. Until it is removed, the only reason for
setting it would be to raise the static default limit, so change its
default to INT_MAX so that it does nothing by default.
Instead of enabling it only when a stream-cache is enabled, also try to
enable it independently from that if the demuxer is marked as
is_network.
Also add some code to the EDL code, so EDLs containing network streams
are automatically cached this way.
Extend the OSD info line so that it shows the demuxer cache in this case
(more or less).
I didn't find where or whether options.rst describes how the demuxer
cache is enabled, so no changes there.
"uncached_stream" is a pretty bad name. It could be mistaken for a
boolean, and then its meaning would be inverted. Rename it.
Also add a "caching" field, which signals that the stream is a cache or
reads from a cache. This is easier to understand and more flexible.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
Disabling cache readahead by default until at least 1 track is selected
is mainly for external files and such, where you don't want them to use
up resources until they're actually used.
It doesn't make sense to disable the cache for the demuxer opened for
prefetch. Also, it's fine to let it do that for the main file too (doing
or not doing it is of little consequence). That saves us from having to
distinguish them.
Cover art handling is a disgusting hack that causes a mess in all
components. And this will stay this way. This is the Xth time I've
changed cover art handling, and that will probably also continue.
But change the code such that cover art is injected into the demux
packet stream, instead of having an explicit special case it in the
decoder glue code. (This is somewhat more similar to the cover art hack
in libavformat.)
To avoid that the over art picture is decoded again on each seek, we
need some additional "caching" in player/video.c. Decoding it after each
seek would work as well, but since cover art pictures can be pretty
huge, it's probably ok to invest some lines of code into caching it.
One weird thing is that the cover art packet will remain queued after
seeks, but that is probably not an issue.
In exchange, we can drop the dec_video.c code, which is pretty
convenient for one of the following commits. This code duplicates a
bunch of lower-level decode calls and does icky messing with this weird
state stuff, so I'm glad it goes away.
It has only 1 caller, and is too far appart within the file. I think it
used to have multiple callers, but now it just doesn't make any sense to
keep it separate anymore.
This deals with the estimation of buffered packets, which is used mostly
for display, but also things like pausing on low buffer levels.
If a stream is fully EOF (no more packets), we don't want to include it
in the total buffer amount. This also means we should make ds->eof less
flaky and more stable, so don't reset it in ds_get_packets() (this
function reset ds->eof just to retrigger a packet read attempt - we can
have this slightly simpler). This somewhat fixes buffering display when
e.g. issuing a refresh seek after re-enabling audio/video when playing
with subtitles only.
When switching a subtitle track, the subtitle wasn't necessarily
updated, especially when playback was paused.
Some awfully subtle and complex interactions here.
First off (and not so subtle), the subtitle decoder will read packets
only on explicit update_subtitles() calls, which, if video is active, is
called only when a new video frame is shown. (A simply video frame
redraw doesn't trigger this.) So call it explicitly. But only if
playback is "initialized", i.e. not when it does initial track selection
and decoder init, during which no packets should be read.
The second issue is that the demuxer thread simply will not read new
packets just because a track was switched, especially if playback is
paused. That's fine, but if a refresh seek is to be done, it really
should do this. So if there's either 1. a refresh seek requested, or 2.
a refresh seek ongoing, then read more packets.
Note that it's entirely possible that we overflow the packet queue with
this in unpredicated weird corner cases, but the queue limit will still
be enforced, so this shouldn't make the situation worse.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
This is for text subtitles. libavformat currently always reads text
subtitles completely on init. This means the underlying stream is
useless and will consume resources for various reasons (network
connection, file handles, cache memory).
Take care of this by closing the underlying stream if we think the
demuxer has read everything. Since libavformat doesn't export whether it
did (or whether it may access the stream again in the future), we rely
on a whitelist. Also, instead of setting the stream to NULL or so, set
it to an empty dummy stream. This way we don't have to litter the code
with NULL checks.
demux_lavf.c needs extra changes, because it tries to do clever things
for the sake of subtitle charset conversion.
The main reason we keep the demuxer etc. open is because we fell for
libavformat being so generic, and we tried to remove corresponding
special-cases in the higher-level player code. Some of this is forced
due to ass/srt mkv/mp4 demuxing being very similar to external text
files. In the future it might be better to do this in a more
straight-forward way, such as reading text subtitles into libass and
then discarding the demuxer entirely, but for aforementioned reasons
this could be more of a mess than the solution introduced by this
commit.
Probably fixes#3456.
Cleaner and makes it easier to change the underlying stream.
mp_property_stream_capture() still directly accesses it directly via
demux_run_on_thread(). This is evil, but still somewhat sane and is not
getting into the way here.
Not sure if I got all field accesses.
It doesn't necessarily have to mean anything bad.
We're still too lazy to provide any more detailed information (e.g.
whether this happened to likely bad interleaving, excessive amount of
packets like with some ASS subs, or that the readahead user option is
limitted by the packet queue size).
When an ogg track upodates metadata, we have to perform a complicated
runtime update due to the demux.c architecture. A detail was broken and
an array was allocated with the previous number of streams, which
usually led to invalid memory write accesses at least on the first
update.
See github commit comment on commit b9ba9a89.
If the PEAK tag is invalid, return an error.
Make the error signalling conventions more uniform by strictly returning
a negative value on error, and treating >=0 as success.
The demuxer layer usually doesn't log per-stream information, and even
the replaygain information was logged only if it came from tags.
So log it in af_volume instead.
...and ignore it. The main purpose is for retrieving per-track
replaygain tags. Other than that per-track tags are not used or accessed
by the playback core yet.
The demuxer infrastructure is still not really good with that whole
synchronization thing (at least in part due to being inherited from
mplayer's single-threaded architecture). A convoluted mechanism is
needed to transport the tags from demuxer thread to user thread. Two
factors contribute to the complexity: tags can change during playback,
and tracks (i.e. struct sh_stream) are not duplicated per thread.
In particular, we update the way replaygain tags are retrieved. We first
try to use per-track tags (common in Matroska) and global tags
(effectively formats like mp3). This part fixes#3405.
Remove the explicit whitelisting of formats for refresh seeks. Instead,
check whether the packet position is somewhat reliable during demuxing.
If there are packets without position, or the packet position is not
monotonically increasing, then do not use them for refresh seeks.
This does not make sure of some requirements, such as deterministic
seeks. If that happens, mpv will mess up a bit on stream switching.
Also, add another method that uses DTS to identify packets, and prefer
it to the packet position method. Even if there's a demuxer which
randomizes packet positions, it hardly can do that with DTS. The DTS
method is not always available either, though. Some formats do not have
a DTS, and others are not always strictly monotonic (possibly due to
libavformat codec parsing and timestamp determination issues).
If the packet read function returns, and EOF was detected, and a seek
was issued in the meantime, then don't use the EOF result. The seek will
be processed later, and reset the EOF state anyway.
The main effect is probably that we don't return EOF to the decoders
(which the playback core resets before issuing the seek), and that we
won't log an EOF message.
Not important, but slightly more correct.
When switching tracks, we normally have the problem that data gets lost
due to readahead buffering. (Which in turn is because we're stubborn and
instruct the demuxers to discard data on unselected streams.) The
demuxer layer has a hack that re-reads discarded buffered data if a
stream is enabled mid-stream, so track switching will seem instant.
A somewhat similar problem is when all tracks of an external files were
disabled - when enabling the first track, we have to seek to the target
position.
Handle these with the same mechanism. Pass the "current time" to the
demuxer's stream switch function, and let the demuxer figure out what to
do. The demuxer will issue a refresh seek (if possible) to update the
new stream, or will issue a "normal" seek if there was no active stream
yet.
One case that changes is when a video/audio stream is enabled on an
external file with only a subtitle stream active, and the demuxer does
not support rrefresh seeks. This is a fuzzy case, because subtitles are
sparse, and the demuxer might have skipped large amounts of data. We
used to seek (and send the subtitle decoder some subtitle packets
twice). This case is sort of obscure and insane, and the fix would be
questionable, so we simply don't care.
Should mostly fix#3392.
Instead of having a separate for each, which also requires separate
additional caching in the demuxer. (The demuxer adds an indirection,
since STREAM_CTRLs are not thread-safe.)
Since this includes the cache speed, this should fix#3003.
This is simpler, because it doesn't have to wait from both threads for
synchronization.
Apart from being simpler/cleaner, this serves vague plans to stop/start
the demuxer thread itself automatically on demand (for the purpose of
reducing unneeded resource usage).
This pause stuff is bothersome and is needed only for a few corner-
cases. This commit removes it from the demuxer public API and replaces
it with a demux_run_on_thread() function and refactors the code which
needed demux_pause(). The next commit will change the implementation.
Commit 503c6f7f essentially removed timestamps from "laces" (Block sub-
divisions), which means many audio packets will have no timestamp.
There's no reason why bitrate calculation can't just delayed to a point
when the next timestamp is known.
Fixes#2903 (no audio bitrate with mkv files).
Ever since a change in mplayer2 or so, relative seeks were translated to
absolute seeks before sending them to the demuxer in most cases. The
only exception in current mpv is DVD seeking.
Remove the SEEK_ABSOLUTE flag; it's not the implied default. SEEK_FACTOR
is kept, because it's sometimes slightly useful for seeking in things
like transport streams. (And maybe mkv files without duration set?)
DVD seeking is terrible because DVD and libdvdnav are terrible, but
mostly because libdvdnav is terrible. libdvdnav does not expose seeking
with seek tables. (Although I know xbmc/kodi use an undocumented API
that is not declared in the headers by dladdr()ing it - I think the
function is dvdnav_jump_to_sector_by_time().) With the current mpv
policy if not giving a shit about DVD, just revert our half-working seek
hacks and always use dvdnav_time_search(). Relative seeking might get
stuck sometimes; in this case --hr-seek=always is recommended.
If a stream is marked as EOF (due to no packets found in reach), then we
need to wakeup the decoder. This is important especially if no packets
are found at the start of the file, so the A/V sync logic actually
starts playback, instead of waiting for packets that will never come.
(It would randomly start playback when running the playback loop due to
arbitrary external events like user input.)
This uses a different method to piece segments together. The old
approach basically changes to a new file (with a new start offset) any
time a segment ends. This meant waiting for audio/video end on segment
end, and then changing to the new segment all at once. It had a very
weird impact on the playback core, and some things (like truly gapless
segment transitions, or frame backstepping) just didn't work.
The new approach adds the demux_timeline pseudo-demuxer, which presents
an uniform packet stream from the many segments. This is pretty similar
to how ordered chapters are implemented everywhere else. It also reminds
of the FFmpeg concat pseudo-demuxer.
The "pure" version of this approach doesn't work though. Segments can
actually have different codec configurations (different extradata), and
subtitles are most likely broken too. (Subtitles have multiple corner
cases which break the pure stream-concatenation approach completely.)
To counter this, we do two things:
- Reinit the decoder with each segment. We go as far as allowing
concatenating files with completely different codecs for the sake
of EDL (which also uses the timeline infrastructure). A "lighter"
approach would try to make use of decoder mechanism to update e.g.
the extradata, but that seems fragile.
- Clip decoded data to segment boundaries. This is equivalent to
normal playback core mechanisms like hr-seek, but now the playback
core doesn't need to care about these things.
These two mechanisms are equivalent to what happened in the old
implementation, except they don't happen in the playback core anymore.
In other words, the playback core is completely relieved from timeline
implementation details. (Which honestly is exactly what I'm trying to
do here. I don't think ordered chapter behavior deserves improvement,
even if it's bad - but I want to get it out from the playback core.)
There is code duplication between audio and video decoder common code.
This is awful and could be shareable - but this will happen later.
Note that the audio path has some code to clip audio frames for the
purpose of codec preroll/gapless handling, but it's not shared as
sharing it would cause more pain than it would help.
