Apparently, for bit streaming DTS-HD MA is specified to be handled as an
eight channel (7.1) bit stream, while DTS-HD HRA is specified to be
handled as a stereo bit stream.
Define a variable for this, and utilize it to set the correct values
for both the DTS-HD bit streaming rate, as well as the channel count
for the SPDIF encoder.
Fixes#6148
This was always a legacy thing. Remove it by applying an orgy of
mp_get_config_group() calls, and sometimes m_config_cache_alloc() or
mp_read_option_raw().
win32 changes untested.
MPlayer used this to distinguish multiple decoder wrappers (such as
libavcodec vs. binary codec loader vs. builtin decoders). It lost
meaning in mpv as non-libavcodec things were dropped. Now it doesn't
serve any purpose anymore.
Parsing was removed quite a while ago, and the recent filter change
removed any use of the internal family field. Get rid of it.
Use the decoder wrapper that was introduced for video. This removes all
code duplication the old audio decoder wrapper had with the video code.
(The audio wrapper was copy pasted from the video one over a decade ago,
and has been kept in sync ever since by the power of copy&paste. Since
the original copy&paste was possibly done by someone who did not answer
to the LGPL relicensing, this should also remove all doubts about
whether any of this code is left, since we now completely remove any
code that could possibly have been based on it.)
There is some complication with spdif handling, and a minor behavior
change (it will restrict the list of codecs to spdif if spdif is to be
used), but there should not be any difference in practice.
If feed_packet() ended with DATA_WAIT, the player should have gone to
sleep, until the demuxer wakes it up again when there is new data. But
the call to read_frame() unconditionally overwrote this status code, so
it never waited. The consequence was that the core burned CPU by
effectively polling the demuxer status, which was noticeable especially
when seeking in network streams (since seeking is async, decoders will
start out with having to wait for network).
Regression since commit 33e5755c.
The old code tried to make sure at all times to try to read a new
packet. Only once that was read, it tried to retrieve new video or audio
frames the decoder might already have decoded.
Change this to strictly read frames from the decoder until it signals
that it wants a new packet, and only then read and feed a new packet.
This is in theory nicer, follows the libavcodec recommended data flow,
and and reduces the minimum latency by 1 frame.
This merely requires switching the order in which those calls are done.
Normally, the decoder will return only 1 frame until a new packet is
required. If we would just feed it 1 packet, return DATA_AGAIN, and wait
until the next frame is decoded, we would run the playloop 1 time too
often for no reason (which is fine but might have some overhead). To
avoid this, try to read a frame again after possibly feeding a packet.
For this reason, move the feed/read code to its own functions each,
instead of merely moving the code.
The audio and video code for this particular thing is basically
duplicated. The idea is to unify them one day, so make the change to
both. (Doing this for video is the real motivation for this change, see
below.)
The video code change is slightly more complicated, because we have to
care about the framedrop counting (which is just a heuristic, but for
now considered better than nothing, and possibly considered required to
warn the user of framedrops happening - maybe).
Apparently this change helps with stalling streams on Android with the
mediacodec wrapper and mpeg2 decoder implementations which deinterlace on
decoding (and return 2 frames per packet).
Based on an idea and observations by tmm1.
A release has been made, so drop options deprecated for that release.
Also drop some options which have been deprecated a much longer time
before.
Also fix a typo in client-api-changes.rst.
The new_segment field was used to track the decoder data flow handler of
timeline boundaries, which are used for ordered chapters etc. (anything
that sets demuxer_desc.load_timeline). This broke seeking with the
demuxer cache enabled. The demuxer is expected to set the new_segment
field after every seek or segment boundary switch, so the cached packets
basically contained incorrect values for this, and the decoders were not
initialized correctly.
Fix this by getting rid of the flag completely. Let the decoders instead
compare the segment information by content, which is hopefully enough.
(In theory, two segments with same information could perhaps appear in
broken-ish corner cases, or in an attempt to simulate looping, and such.
I preferred the simple solution over others, such as generating unique
and stable segment IDs.)
We still add a "segmented" field to make it explicit whether segments
are used, instead of doing something silly like testing arbitrary other
segment fields for validity.
Cached seeking with timeline stuff is still slightly broken even with
this commit: the seek logic is not aware of the overlap that segments
can have, and the timestamp clamping that needs to be performed in
theory to account for the fact that a packet might contain a frame that
is always clipped off by segment handling. This can be fixed later.
This code could not be relicensed. The intention was to write new filter
code (which could handle both audio and video), but that's a bit of
work. Write some code that can do audio conversion (resampling,
downmixing, etc.) without the old audio filter chain code in order to
speed up the LGPL relicensing.
If you build with --disable-libaf, nothing in audio/filter/* is compiled
in. It breaks a few features, such as --volume, --af, pitch correction
on speed changes, replaygain.
Most likely this adds some bugs, even if --disable-libaf is not used.
(How the fuck does EOF notification work again anyway?)
This is pretty pointless, but I believe it allows us to claim that the
new code is not affected by the copyright of the old code. This is
needed, because the original mp_audio struct was written by someone who
has disagreed with LGPL relicensing (it was called af_data at the time,
and was defined in af.h).
The "GPL'ed" struct contents that surive are pretty trivial: just the
data pointer, and some metadata like the format, samplerate, etc. - but
at least in this case, any new code would be extremely similar anyway,
and I'm not really sure whether it's OK to claim different copyright. So
what we do is we just use AVFrame (which of course is LGPL with 100%
certainty), and add some accessors around it to adapt it to mpv
conventions.
Also, this gets rid of some annoying conventions of mp_audio, like the
struct fields that require using an accessor to write to them anyway.
For the most part, this change is only dumb replacements of mp_audio
related functions and fields. One minor actual change is that you can't
allocate the new type on the stack anymore.
Some code still uses mp_audio. All audio filter code will be deleted, so
it makes no sense to convert this code. (Audio filters which are LGPL
and which we keep will have to be ported to a new filter infrastructure
anyway.) player/audio.c uses it because it interacts with the old filter
code. push.c has some complex use of mp_audio and mp_audio_buffer, but
this and pull.c will most likely be rewritten to do something else.
This API isn't deprecated (yet?), but it's still inferior and harder to
use than avcodec_free_context().
Leave the call only in 1 case in af_lavcac3enc.c, where we apparently
seriously close and reopen the encoder for whatever reason.
Use avcodec_free_context() unstead of random other calls. Actually it
was already used in the second case, but calling avcodec_close() is
redundant.
Don't crash if allocating a codec context fails.
All relevant authors of the current code have agreed.
As always, there are the usual historical artifacts that could be
mentioned. For example, there used to be a large number of decoders
by various authors who were not asked, but whose code was all 100%
removed. (Mostly due to FFmpeg providing all codecs.)
One point of contention is that Nick Kurshev might have refactored the
old audio decoder code in 2001. Basically, there are hints that it might
have been done by him, such as Arpi's commit message stating that the
code was imported from MPlayerXP (Nick's fork), or all the files having
his name in the "maintainer" field. On the other hand, the murky history
of ad.h weakens this - it could be that Arpi started this work, and Nick
took it (and possibly finished it).
In any case, Nick could not be reached, so there is no agreement for
LGPL relicensing from him. We're changing the license anyway, and assume
that his change in itself is not copyrightable. He only moved code, and
in addition used the equivalent video decoder framework (done by Arpi,
who agreed) as template. For example, ad_functions_s was basically
vd_functions_s, which the signature of the decode callback changed to
the same as audio_decode(). ad_functions_s also had a comment that said
it interfaces with "video decoder drivers" (I'm fixing this comment in
this commit).
I verified that no additional code was added that is copyright-relevant,
still in today's code, and not copied from the existing code at the time
(either from the previous audio decoder code or the video framework
code). What apparently matters here is that none of the old code was not
written by Nick, and the authors of the old code have given his
agreement, and (probably) that Nick didn't add actual new code (none
that would have survived), that was not trivially based on the old one
(i.e. no new copyrightable "work").
A copyright expert told me that this kind of change can be considered
not relevant for copyright, so here we go.
Rewriting this would end with the same code anyway, and the naming
conventions can't be copyrighted.
All authors have agreed.
Commit 94d3170bd0 is a bit murky: Nick could not be reached, and arpi's
changes were obviously inspired or copied from Nick's. However, the
changed symbols were removed and do not exist anymore.
This can be useful in other contexts.
Note that we end up setting AVCodecContext.width/height instead of
coded_width/coded_height now. AVCodecParameters can't set coded_width,
but this is probably more correct anyway.
The FFmpeg versions we support all have the APIs we were checking for.
Only Libav missed them. Simplify this by explicitly checking for FFmpeg
in the code, instead of trying to detect the presence of the API.
Since we set "skip_manual", we can actually get frames with this set.
Currently, only AV_PKT_FLAG_DISCARD will trigger this flag, and only
mov.c sets the latter flags, so this is related to FFmpeg's half-broken
mp4 edit list support.
Apparently you set the native sample rate when passing through AC3.
This fixes passthrough with 44100 Hz AC3.
Avoid opening a decoder for this and only open the parser. (Hopefully
DTS will also support this some time in the future or so - having to
open a decoder just to get the profile is dumb.)
Same deal as with video. Including the EOF handling.
(It would be nice if this code were not duplicated, but right now we're
not even close to unifying the audio and video code paths.)
Remove ad_spdif from the normal codec list, and select it explicitly.
One goal was to decouple this from the normal codec selection, so
they're less entangled and the decoder selection code can be simplified
in the far future. This means spdif codec selection is now done
explicitly via select_spdif_codec(). We can also remove the weird
requirements on "dts" and "dts-hd" for the --audio-spdif option, and it
can just do the right thing.
Now both video and audio codecs consist of a single codec family each,
vd_lavc and ad_lavc.
Currently, if init_filter fails after lavf_ctx is allocated, uninit is called
which frees lavf_ctx, but doesn't clear the pointer in spdif_ctx. So, on the
next call of decode_packet, it thinks it is already initialized and uses it,
resulting in a crash on my system.
Both AVFrame.pts and AVFrame.pkt_pts have existed for a long time. Until
now, decoders always returned the pts via the pkt_pts field, while the
pts field was used for encoding and libavfilter only. Recently, pkt_pts
was deprecated, and pts was switched to always carry the pts.
This means we have to be careful not to accidentally use the wrong
field, depending on the libavcodec version. We have to explicitly check
the version numbers. Of course the version numbers are completely
idiotic, because idiotically the pkg-config and library names are the
same for FFmpeg and Libav, so we have to deal with this explicitly as
well.
These are different AVCodecContext fields. pkt_timebase is the correct
one for identifying the unit of packet/frame timestamps when decoding,
while time_base is for encoding. Some decoders also overwrite the
time_base field with some unrelated codec metadata.
pkt_timebase does not exist in Libav, so an #if is required.
Instead of passing through double float timestamps opaquely, pass real
timestamps. Do so by always setting a valid timebase on the
AVCodecContext for audio and video decoding.
Specifically try not to round timestamps to a too coarse timebase, which
could round off small adjustments to timestamps (such as for start time
rebasing or demux_timeline). If the timebase is considered too coarse,
make it finer.
This gets rid of the need to do this specifically for some hardware
decoding wrapper. The old method of passing through double timestamps
was also a bit questionable. While libavcodec is not supposed to
interpret timestamps at all if no timebase is provided, it was
needlessly tricky. Also, it actually does compare them with
AV_NOPTS_VALUE. This change will probably also reduce confusion in the
future.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
The libavcodec wmapro decoder will skip some bytes at the start of the
first packet and return each time. It will not return any audio data in
this state.
Our own code as well as libavcodec's new API handling
(avcodec_send_packet() etc.) discard the PTS on the first return, which
means the PTS is never known for the first packet. This results in a
"Failed audio resync." message.
Fixy it by remember the PTS in next_pts. This field is used only if the
decoder outputs no PTS, and is updated after each frame - and thus
should be safe to set.
(Possibly this should be fixed in libavcodec new API handling by not
setting the PTS to NOPTS as long as no real data has been output. It
could even interpolate the PTS if the timebase is known.)
Fixes the failure message seen in #3297.
Some bugs in this code are exposed by e.g. playing lossless audio files
with --ad-lavc-threads=16. (libavcodec doesn't really support threaded
audio decoding, except for lossless files.) In these cases, a major
amount of audio can be buffered, which makes incorrect handling of this
buffering obvious.
For one, draining the decoder can take a while, so if there's a new
segment, we shouldn't read audio.
The segment end check was completely wrong, and used the start value.
Workaround for an awful corner-case. The new decode API "locks" the
decoder into the EOF state once a drain packet has been sent. The
problem starts with a file containing a 0-sized packet, which is
interpreted as drain packet.
This should probably be changed in libavcodec (not treating 0-sized
packets as drain packets with the new API) or in libavformat (discard
0-sized packets as invalid), but efforts to do so have been fruitless.
Note that vd_lavc.c already does something similar, but originally for
other reasons.
Fixes#3106.
AVFormatContext.codec is deprecated now, and you're supposed to use
AVFormatContext.codecpar instead.
Handle this for all of the normal playback code.
Encoding mode isn't touched.
Fixes correctness_trimming_nobeeps.opus. One nasty thing is that this
mechanism interferes with the container-signalled mechanism with
AV_FRAME_DATA_SKIP_SAMPLES. So apply it only if that is apparently not
present. It's a mess, and it's still broken in FFmpeg CLI, so I'm sure
this will get fucked up later again.
I'm not quite sure what the FFmpeg AV_FRAME_DATA_SKIP_SAMPLES API
demands here. The code so far assumed that skipping can be more than a
frame, but not trimming. Extend it to trimming too.
This is actually already done by dec_audio.c. But if
AV_FRAME_DATA_SKIP_SAMPLES is applied, this happens too late here. The
problem is that this will slice off samples, and make it impossible for
later code to reconstruct the timestamp properly.
Missing timestamps can still happen with some demuxers, e.g. demux_mkv.c
with Opus tracks. (Although libavformat interpolates these itself.)
Anton Kindestam
Jan Ekström
wm4
Michael Forney