Rework much of the logic related to reading from event sources and
queuing commands. The two biggest architecture changes are:
- The code buffering keycodes in mp_fifo.c is gone. Instead key input
is now immediately fed to input.c and interpreted as commands, and
then the commands are buffered instead.
- mp_input_get_cmd() now always tries to read every available event
from every event source and convert them to (buffered) commands.
Before it would only process new events until one new command became
available.
Some relevant behavior changes:
- Before commands could be lost when stream code called
mp_input_check_interrupt() which read commands (to see if they were
of types that triggered aborts during slow IO tasks) and then threw
them away. This was especially an issue if cache was enabled and slow
to read. Fixed - now it's possible to check whether there are queued
commands which will abort playback of the current file without
throwing other commands away.
- mp_input_check_interrupt() now prints a message if it returns
true. This is especially useful because the failures caused by
aborted stream reads can trigger error messages from other code that
was doing the read; the new message makes it more obvious what the
cause of the subsequent error messages is.
- It's now possible to again avoid making stdin non-blocking (which
caused some issues) without reintroducing extra latency. The change
will be done in a subsequent commit.
- Event sources that do not support select() should now have somewhat
lower latency in certain situations as they will be checked both
before and after select()/sleep in input reading; before the sleep
always happened first even if such sources already had queued
input. Before the key fifo was also handled in this manner (first
key triggered select, but if multiple were read then rest could be
delayed; however in most cases this didn't add latency in practice
as after central code started doing command handling it queried for
further commands with a max sleep time of 0).
- Key fifo limiting is more accurate now: it now counts actual
commands intead of keycodes, and all queued keys are read
immediately from input devices so they can be counted correctly.
- Since keypresses are now interpreted immediately, commands which
change keybindings will no longer affect following keypresses that
have already been read before the command is executed. This should
not be an issue in practice with current keybinding behavior.
Remove some unnecessary typedefs and remove pointless mp_ prefix from
some internal struct names.
Change the type of the "close_func" pointers from "void f(int fd)" to
"int f(int fd)" so that using standard close() there is valid.
Delete some useless assert() statements.
Move internal MP_MAX_KEY_DOWN define from input.h to input.c.
Instead of strictly limiting the number of total entries in the
internal fifo, make the overall buffer bigger and try to limit entries
based on how many bound commands they're expected to generate. Now
doubleclick and button down events aren't counted for that limit.
Normally the sequence down-doubleclick-up generates at most one
command, so this better matches the quantity we actually want to
limit. Also add a mechanism to clear the button combination state kept
by input.c when the fifo is full; this avoids "stuck button" problems
due to button release events being dropped.
The key combination state clearing is partially based on MPlayer 1
changes by Reimar Döffinger (though overall the effects of this commit
are quite different). It still doesn't make "stuck button" problems
completely impossible; at least if the VO gets closed while a button
was down then nothing will send a button up event or reset state.
Move the definitions of all special key codes (those not passed by
ASCII value) to input/keycodes.h. Before they were spread between
osdep/keycodes.h, input/joystick.h, input/mouse.h and input/ar.h, plus
some special values in input.h. This was especially inconvenient as
the codes had to be coordinated to not conflict between the files.
The change requires a bit of ugliness as appleir.c includes
<linux/input.h> which contains various conflicting KEY_* definitions.
Work around this by adding a special preprocessor variable which can
be used to avoid defining these in keycodes.h.
If a specified key is pressed during playback, the current stream is
captured to a file, similar to what -dumpstream achieves.
original patch by Pásztor Szilárd, don tricon hu
Taken from the following svn commits, but with several fixes and
modifications (one obvious user-visible difference is that the default
key binding is 'C', not 'c'):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32524 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32529 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32530 b3059339-0415-0410-9bf9-f77b7e298cf2
The GUI is badly designed and too closely coupled to the internal
details of other code. The GUI code is in bad shape and unmaintained
for years. There is no indication that anyone would maintain it in the
future either. Even if someone did volunteer to implement a better
integrated GUI having the current code in the tree probably wouldn't
help much. So get rid of it.
Parameters now use a string much more intuitive than previous int value.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27100 b3059339-0415-0410-9bf9-f77b7e298cf2
Mostly useful when used with -idle mode.
Patch by Mathieu Schroeter ( mathieu dot schroeter at gamesover dot ch )
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26909 b3059339-0415-0410-9bf9-f77b7e298cf2
Start moving static variables to a context struct. Only autorepeat
state is moved to the struct in this commit.
mp_input_check_interrupt now requires the context variable. Change
stream functions to pass it. It's still stored in a static variable in
stream/.
Use the same mp_input_add_key_fd for all uses and add a context
argument to its callback that was before only in the event fd
callbacks. Instead of checking in input.c whether keys were inserted
to the keypress FIFO during the callback do the check in the callback
before returning and set return value accordingly.
be called from a signal handler.
Instead only make the input system generate quit commands for the first
CTRL+C and otherwise do getch2_disable and exit.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25651 b3059339-0415-0410-9bf9-f77b7e298cf2
1. sub_source for current sub source (sub file, vobsub, or from demuxer).
2. sub_file for all subtitles from files.
3. sub_vobsub for all subtitles from vobsub.
4. sub_demux for all subtitles from demuxer.
Now mplayer can supply a stable and clear interface to external programs
using mplayer in slave mode to select a subtitle by its source and
its unique id for that source printed by mplayer using -identify parameter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25157 b3059339-0415-0410-9bf9-f77b7e298cf2
Add an input/input.c fd type whose read function takes no arguments and
returns no value. If such a function reads key or command events it'll
add them to the queues itself. Use this type for terminal input which
was special-cased before. The event function for X11-based VOs will use
the same type later.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24152 b3059339-0415-0410-9bf9-f77b7e298cf2
Code is based on patch from Otvos Attila oattila at chello dot hu
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24125 b3059339-0415-0410-9bf9-f77b7e298cf2
