Do a minimal check on data read with stream_peek(). This could help with
probing from unseekable streams in some situations. (We could check the
entire EBML and Matroska headers, but probably not worth the trouble. We
could also seek back to the start, which demux.c doesn't do, but which
would work usually - also not worth the trouble.)
Make the changes started in commit c827ae5f more eloborate, and provide
an option to control the amount of data read before the seek-target. To
achieve this, rewrite the loop that finds the lowest still acceptable
target cluster. It is now searched by time instead of file position. The
behavior (both with and without preroll option) may be different from
before this change, although it shouldn't be worse.
The change demux_mkv_read_cues() fixes a bug: when seeking after playing
normally, the code would erroneously assume that durations are set. This
doesn't happen if the first operation after loading was a seek instead
of playback.
Revert commit 24e52f66; even though the old beheavior doesn't make sense
(as the commit message assured), it turns out that this works better:
typically, it means preroll will start from the previous video key frame
(the video CUE index will contain clusters with video key frames only),
which often coincides with subtitle changes. Thus the old behavior is
actually better.
Change the code that uses CueDuration elements. Instead of merely
checking whether preroll should be done, find the first cluster that
needs to be read to get all subtitle packets. (The intention is to
compensate for the enlarged preroll cluster-range due to reverting
commit 24e52f66.)
This considered only index entries that were for the same track ID as
the track used for seeking. This doesn't make much sense for preroll;
it'll just possibly skip clusters, and select an earlier cluster.
One possible negative side-effect is that the preroll might be too tight
now, and miss subtitle packets more often.
The demuxer has a hack to seek to the cluster before the target cluster
in order to "catch" subtitle lines that start before the seek target,
but overlap with the video after the seek target.
Avoid this hack if the cue index indicates that there are no overlapping
subtitle packets that can be caught by seeking to the previous cluster.
Nothing is done with them yet. This is preparation for the following
commit.
CueRelativePosition isn't even saved anywhere, because I don't intend to
use it. (Too messy for no gain.)
Instead of indexing only 1 packet per cluster (which is enough for
working seeking), add every packet to the index.
Since on seek, we go through every single index entry, this probably
makes seeking slower. On the other hand, this code is used for files
without index only (e.g. incomplete files), so it probably doesn't
matter much.
Preparation for the following commits.
This mechanism was introduced for Opus, and allows correct skipping of
"preroll" data, as well as discarding trailing audio if the file's
length isn't a multiple of the audio frame size.
Not sure how to handle seeking. I don't understand the purpose of the
SeekPreRoll element.
This was tested with correctness_trimming_nobeeps.opus, remuxed to mka
with mkvmerge v7.2.0. It seems to be correct, although the reported file
duration is incorrect (maybe a mkvmerge issue).
Instead of defining a separate data structure in the core.
For some odd reason, demux_chapter exported the chapter time in
nano-seconds. Change that to the usual timestamps (rename the field
to make any code relying on this to fail compilation), and also remove
the unused chapter end time.
Makes it behave slightly better for VP9. This is also the behavior
libavformat has.
Also while we're at it, don't set duration except for the first packet.
Normally we don't use the duration except for subtitles (which are never
parsed or "laced"), so this should make no observable difference.
See previous commits. This finally replaces directly reading the file
data into a struct with reading them manually. In theory this is more
portable (no alignment issues and other things). For the most part,
it's nice seeing this gone.
MPlayer traditionally did this because it made sense: the most important
formats (avi, asf/wmv) used Microsoft formats, and many important
decoders (win32 binary codecs) also did. But the world has changed, and
I've always wanted to get rid of this thing from the codebase.
demux_mkv.c internally still uses it, because, guess what, Matroska has
a VfW muxing mode, which uses these data structures natively.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
In the else branch pict_type is always 3, so pict_type != 3 is always
false. (Note that I have no idea of what it was supposed to do and it is
just an equivalent of the old behaviour.)
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Something like "char *s = ...; isdigit(s[0]);" triggers undefined
behavior, because char can be signed, and thus s[0] can be a negative
value. The is*() functions require unsigned char _or_ EOF. EOF is a
special value outside of unsigned char range, thus the argument to the
is*() functions can't be a char.
This undefined behavior can actually trigger crashes if the
implementation of these functions e.g. uses lookup tables, which are
then indexed with out-of-range values.
Replace all <ctype.h> uses with our own custom mp_is*() functions added
with misc/ctype.h. As a bonus, these functions are locale-independent.
(Although currently, we _require_ C locale for other reasons.)
Some of these might be security relevant.
The RealAudio code was especially bad. I'm not sure if all RealAudio
stuff still plays correctly; I didn't have that many samples for
testing. Some checks might be unnecessary or overcomplicated compared
to the (obfuscated) nature of the code.
CC: @mpv-player/stable
Also clarify the semantics.
It seems --idx didn't do anything. Possibly it used to change how the
now removed legacy demuxers like demux_avi used to behave. Or maybe
it was accidental.
--forceidx basically becomes --index=force. It's possible that new
index modes will be added in the future, so I'm keeping it
extensible, instead of e.g. creating --force-index.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
VP9 packets can contain 2 frames in some video packets (from which 1
frame is invisible). Due to a design mismatch between libvpx and the
libavcodec vp9 decoder, libvpx can take the "full" packets, but lavc vp9
can not. The consequence is that we have to split the packets if we want
to feed them to the lavc codec.
This is not entirely correct yet: timestamp handling is missing.
--demuxer=lavf and ffmpeg native utilities have the same problem. We can
fix this only once the ffmpeg VP9 parser is fixed.
For some reason, some files appear to have broken mp3 packets, or at
least in a form that libavcodec can't deal with. The audio in the sample
file in question could not be decoded using libavcodec.
The problematic file had variable packet sizes, and the libavcodec
decoder kept printing "mp3: Header missing" for each packet it was fed.
Remuxing with mkvmerge fixes the problem. The mp3 data is probably not
VBR, and remuxing resulted in fixed-size mp3 frames. So I don't know why
the sample file was muxed this way - it might just be incorrect.
The sample file had "libmkv 0.6.4" as MuxingApp (although I could not
get mkvinfo to print this element, maybe the file uses an incorrect
element ID), and "HandBrake 0.9.4" as WritingApp.
Note that the libmpg123 decoder does not have any issues with it. It's
probably more robust, because libmpg123 was made to decode whole mp3
files, not just single frames.
Fixes issue #742.
This skipped all audio packets before the first video key frame was
found. I'm not really sure why this would be needed; most likely it
isn't. So get rid of it. Even if audio packets are returned to the
player too soon, the player will sync the audio start to the video
start by decoding and discarding audio data.
Note that although the removed code was just added in the previous
commit, it merely kept the old keeping semantics which demux_mkv
always followed. This commit removes these special semantics.
v_skip_to_keyframe is set to true while non-keyframe video packets are
skipped. Until now, audio packets were also skipped when doing this. I
can't see any good reason why this would be done, but for now I want to
keep the old logic when audio+video seeks are done.
However, for audio-only mode, do proper seeking, which also fixes
behavior when trying to seek past the end of the file: playback is
terminated properly, instead of starting playback on the start of the
last cluster.
Note that a_no_timecode_check is used only for audio+video seek. I'm
not sure what this is needed for, but it might influence A/V sync after
seeking.
If there's more than one edition, print the list of editions, including
the edition name, whether the edition is selected, whether the edition
is default, and the command line option to select the edition. (Similar
to stream list.)
Move reading the tags to a separate function process_tags(), which is
called when all other state is parsed. Otherwise, that tags will be lost
if chapters are read after the tags.
Pretty worthless. This is called from the seek code, which will
reinitialize these anyway. Even if seeking somehow decides to fail, the
new values are still valid.
One could say a failed seek (if that happens) should jump back to the
original position, and thus it would be better to make sure the state
is restored. But then demux_mkv_seek needs to do this correctly,
including not setting up skipping to the target timestamp. But not
bothering with this.
Extremely obscure corner case with concatenated segments, in which EOF
wasn't recognized correctly, and it tried to demux clusters from the
next segment.
See [MKV]_Editions,_Linked_Segments,_&_Tracksets.mkv from the CCCP test
file collection.
This basically used to be part of the user interface, before mpv moved
printing the track list to the frontend, and this code was raised to
verbose output level.
For some reason, if an error happened when reading headers, it merely
stopped reading the headers, and then continued normally. (It looks like
the case to exit hard (-2) was mainly used for skipping unwanted ordered
chapter segments.)
I can't comprehend this. Always exit on error when reading headers.
(Maybe some more error tolerance would be good, but I have no test case,
and there's some danger of entering endless loops.)
This makes everything more robust, and also somewhat simpler (even if
the diffstat isn't very impressive).
Instead of recursively following SeekHeads while reading headers, just
read the headers until the first cluster, and then possibly use
SeekHeads to read the remaining missing headers.
