Commits ba70b150fb and 8a4f812b76 should have mentioned this. These
things should be quite useful for client API users, and thus should be
mentioned in a prominent place.
Although I'm not sure if anyone will understand from this gibberish what
this really means.
When the current file changes (or rather, when starting/finishing
playback of a playlist entry), clients tend to have the problem that
it's hard to tell whether a property change notification (via
mpv_observe_property() and mechanisms layered on top of it) is from the
previous or new playlist entry. The previous commit probably helps, but
all the asynchronity is still a bit unhelpful.
Try to make this better by adding new hooks, that are run before/after
playback init/deinit. This is similar to the existing hooks, except
they're outside of "initialized" playback, which excludes that you might
accidentally get an overlap between the current and the previous/next
playlist entry.
That still doesn't seem quite enough, since normally, property change
notifications come after the hook event. So basically a client would
have to explicitly "drain" the event queue within the hook, and make the
hook continue only after that is done. Knowing when property
notifications are done is another asynchronous nightmare (how exactly it
works keeps changing within client.c, and an API user probably can't
tell anymore when all pending properties are truly done). So introduce
another guarantee: properties that were changed before the hook happens
will be returned before the hook event is returned. That means the
client will have received all pending property notifications from the
previous playlist entry (or whatever) before the hook is entered.
As another minor complication, we shouldn't just keep the hook pending
until _all_ property notifications are done, since the client's hook
could produce new ones. (Or just consider things like the demuxer thread
hammering the client with cache update events, while the "on_preloaded"
hook is run.) So there is some extra untested, fragile logic in client.c
to handle this (the waiting_for_hook flag).
This probably works, but was barely tested. Not sure if this helps
anyone, but I think it's fine for my own purposes. (I really hated this
aspect of the API whenever I used it myself.)
No replacement. Qt or C++ code has no business in this repository, and
new code (even if it uses Qt) should not use it. Get rid of it.
We consider the libmpv API itself as stable. Symbols can be deprecated,
but not be removed. However, qthelper.hpp was never considered part of
the libmpv API. There no ABI implications either, since it's a header-
only implementation that uses C API symbols only. It's just a header
provided for convenience for Qt/C++ programs (i.e. extremely limited
usefulness).
This is more or less a minimal hack to make _some_ text measurement
functionality available to scripts. Since libass does not support such a
thing, this simply uses the bounding box of the rendered text.
This is far from ideal. Problems include:
- using a bitmap bounding box
- additional memory waste and/or flushing caches
- dependency on window size
- odd small deviations with different window sizes (run osd-test.lua and
resize the window after each timer update; the bounding boxes aren't
adjusted in an overly useful way)
- inability to query the size _after_ actual rendering
But I guess it's a start. Since I'm aware that it's crap, add a threat
to the manpage that this may be changed/removed again. For now, I'm
interested whether anyone will have use for it in its current form, as
it's an often requested feature.
The mp_filter_run() invocation blocks as long as the demuxer provides
packets and the queue can be filled. That means it may block quite a
long time of the decoder queue size is large (since we use libavcodec in
a blocking manner; it regrettably does not have an async. API).
This made the main thread freeze in certain situations, because it has
to wait on the decoder thread.
Other than I suspected (I wrote that code, but that doesn't mean I know
how the hell it works), this did not freeze during seeking: seek resets
flushed the queue, which also prevented the decoder thread from adding
more frames to it, thus stopping decoding and responding to the main
thread in time. But it does fix the issue that exiting the player waited
for the decoder to finish filling the queue when stopping playback.
(This happened because it called mp_decoder_wrapper_set_play_dir()
before any resets. Related to the somewhat messy way play_dir is
generally set. But it affects all "synchronous" decoder wrapper API
calls.)
This uses pretty weird mechanisms in filter.h and dispatch.h. The
resulting durr hurr interactions are probably hard to follow, and this
whole thing is a sin. On the other hand, this is a _very_ user visible
issue, and I'm happy that it can be fixed in such an unintrusive way.
I don't know what should happen when the same value is written to the
property. It seems that it would be more natural if it were ignored
(since that's also what is done with options now), but you could argue
the other way around as well. In any case, changing it silently could
leads to user scripts etc. breaking, so don't change it now.
Instead, add blabla to the manpage to put the responsibility on the
user, so when we suddenly change it one day, we can blame any breakages
on someone else.
See: #7501
Let's see how much everyone hates this. Leaving it enabled seems
problematic, because libavcodec returns an unspecific error if it
doesn't like it.
Fixes: #6300
See manpage additions. This has been a topic in MPlayer/mplayer2/mpv
since forever. But since libavcodec multi-threaded decoding was added,
I've always considered this pointless. libavcodec requires you to
"preload" it with packets, and then you can pretty much avoid blocking
on it, if decoding is fast enough.
But in some cases, a decoupled decoder thread _might_ help. Users have
for example come up with cases where decoding video in a separate
process and piping it as raw video to mpv helped. (Or my memory is
false, and it was about vapoursynth filtering, who knows.) So let's just
see whether this helps with anything.
Note that this would have been _much_ easier if libavcodec had an
asynchronous (or rather, non-blocking) API. It could probably have
easily gained that with a small change to its multi-threading code and a
small extension to its API, but I guess not.
Unfortunately, this uglifies f_decoder_wrapper quite a lot. Part of this
is due to annoying corner cases like legacy frame dropping and hardware
decoder state. These could probably be prettified later on.
There is also a change in playloop.c: this is because there is a need to
coordinate playback resets between demuxer thread, decoder thread, and
playback logic. I think this SEEK_BLOCK idea worked out reasonably well.
There are still a number of problems. For example, if the demuxer cache
is full, the decoder thread will simply block hard until the output
queue is full, which interferes with seeking. Could also be improved
later. Hardware decoding will probably die in a fire, because it will
run out of surfaces quickly. We could reduce the queue to size 1...
maybe later. We could update the queue options at runtime easily, but
currently I'm not going to bother.
I could only have put the lavc wrapper itself on a separate thread. But
there is some annoying interaction with EDL and backward playback shit,
and also you would have had to loop demuxer packets through the
playloop, so this sounded less annoying.
The food my mother made for us today was delicious.
Because audio uses the same code, also for audio (even if completely
pointless).
Fixes: #6926
The "seekbarkeyframes" option is now interpreted such if it's true, the
player default is used. Too lazy to make this a choice option or
whatever; the Lua option parser doesn't have support for that anyway.
Someone who cares can adjust this.
Try to deal with various corner cases. But when I fix one thing, another
thing breaks. (And it's 50/50 whether I find the breakage immediately or
a few months later.) So results may vary.
The default for--hr-seek is changed to "default" (not creative enough to
find a better name). In this mode, audio seeking is exact if there is no
video, or if the video has only a single frame. This change is actually
pretty dumb, since audio frames are usually small enough that exact
seeking does not really add much. But it gets rid of some weird special
cases.
Internally, the most important change is that is_coverart and is_sparse
handling is merged. is_sparse was originally just a special case for
weird .ts streams that have the corresponding low-level flag set. The
idea is that they're pretty similar anyway, so this would reduce the
number of corner cases. But I'm not sure if this doesn't break the
original intended use case for it (I don't have a sample anyway).
This changes last-frame handling, and respects the duration of the last
frame only if audio is disabled. This is mostly "coincidental" due to
the need to make seeking past EOF trigger player exit, and is caused by
setting STATUS_EOF early. On the other hand, this might have been this
way before (see removed chunk close to it).
This is useful with live streams, and it's not much worse than the h264
first packet hack, which reads some data anyway.
For some reason, the option wasn't even documented, so do that.
In addition, print the start time even if it's negative. That should not
be possible, but for some reason, the field is an int64_t copied from an
uint64_t so... whatever. Keeping the logging slightly more straight
forward is better anyway.
Remove some redundant fields that controlled or indicated whether the
demuxer was/could/should prefetch. Redefine how the eof/reading fields
work.
The in->eof field is now always valid, instead of weirdly being reset to
false in random situations. The in->reading field now corresponds to
whether the demuxer thread is working at all, and is reset if it stops
doing anything.
Also, I always found it stupid that dequeue_packet() forced the demuxer
thread to retry reading if it was EOF. This makes little sense, but was
probably added for files that are being appended to (running downloads).
It makes no sense, because if the cache really tried to read until file
EOF, it would encounter partial packets and throw errors, so all is lost
anyway. Plus stream_file now handles this better. So stop this behavior,
but add a temporary option that enables the old behavior.
I think checking for ds->eager when enabling prefetching never really
made sense (could be debated, but no, not really). On the other hand,
the change above exposed a missing wakeup in the backward demuxing code.
Some chances of regressions that could make it stuck in certain states
or so, or incorrect demuxer cache state reporting to the player
frontend.
This has been part of the libmpv for a while, so the implementation in
the IPC code is quite simple: just pass the mpv_node representing the
value of the "command" field without further checks to
mpv_command_node().
The only problem are the IPC-specific commands, which essentially have
their own dispatch mechanism. They expect an array. I'm not going to
rewrite the dispatch mechanism, so these still work only with an array.
I decided make the other case explicit with cmd==NULL. (I could also
have set cmd=="", which would have avoided changing each if condition
since "" matches no existing command, but that felt dirty.)
I decided to make this explicit. The alternative would have been making
all commands asynchronous always, like a small note in the manpage
threatened. I think that could have caused compatibility issues.
As a design decision, this does not send a reply if an async command
started. This could be a good or bad idea, but in any case, it will make
async command look almost like synchronous ones, except they don't block
the IPC protocol.
In all_formats mode, we've ignored what --ytdl-format did so far, since
we've converted the full format list, instead of just the formats
selected by youtube-dl.
But we can easily restore --ytdl-format behavior: just mark the selected
tracks as default tracks.
I don't think the skip_muxed option was overlay useful. While it was
nice to filter out the low quality muxed versions (as it happens on the
alphabetic site, I suspect it's compatibility stuff), it's not really
necessary, and just makes for another tricky and rarely used
configuration option. (This was different before muxed tracks were also
delay-loaded, and including the muxed versions slowed down loading.)
Add the force_all_formats option instead, which handles the HLS case.
Set it to true because they are also delay-loaded now, and don't slow
down startup as much.
Until now, delay-loading was for files with single tracks only
(basically what DASH and HLS like to expose, so adaptive streaming and
codec selection becomes easier - for sites, not for us). But they also
provide some interleaved versions, probably for compatibility. Until
now, we were forced to eagerly load it (making startup slightly slower).
But there is not much missing. We just need a way to provide multiple
metadata entries, and use them to represent each track.
A side effect is now that the "track_meta" header can be used for normal
EDL files too.
See manpage additions. We would have to extend delay_open to support
multiple sub-tracks (for audio and video), and we'd still don't know (?)
whether it might contain more than one stream each (thinking of HLS
master streams). And if it's a true interleaved file (such as a "normal"
mp4 file provided as fallback for more primitive players), we'd either
have to signal such "bundled" tracks, or waste bandwidth.
This restructures a lot. The if/else tree in add_single_video for format
selection was a bit annoying, so it's split into separate if blocks,
where it checks each time whether a URL was determined yet.
This is just a more convenient way to start IPC client scripts per mpv
instance.
Does not work on Windows, although it could if the subprocess and IPC
parts are implemented (and I guess .exe/.bat suffixes are required).
Also untested whether it builds on Windows. A lot of other things are
untested too, so don't complain.
Pretty worthless I guess. I only tested one site (and 2 videos), it's
somewhat likely that it will break with other sites. Even if you leave
the option disabled (the default).
Slightly related to #3548. This will allows you to use the bitrate
stream selection mechanism, that was added for HLS, with normal videos.
Works as ad-filter. I had some more plans, for example replacing
matching text with different text, but for now it's dropping matches
only. There's a big warning in the manpage that I might change
semantics. For example, I might turn it into a primitive sed.
In a sane world, you'd probably write a simple script that processes
downloaded subtitles before giving them to mpv, and avoid all this
complexity. But we don't live in a sane world, and the sooner you learn
this, the happier you will be. (But I also want to run this on muxed
subtitles.)
This is pretty straightforward. We use POSIX regexes, which are readily
available without additional pain or dependencies. This also means it's
(apparently) not available on win32 (MinGW). The regex list is because I
hate big monolithic regexes, and this makes it slightly better.
Very superficially tested.
This renders incorrectly in the html output. I suspect you need one more
level here. Increase the indentation level. No other changes, other than
re-breaking some lines.
Add something that will access an URL embedded in EDL only when the
track it corresponds to is actually selected. This is meant to help with
ytdl_hook.lua and to improve loading speeds.
In theory, all this stuff is available to any mpv user, but discourage
using it, as it's so specialized towards ytdl_hook.lua, that there's
danger we'll just break this once ytdl_hook.lua stops using it, or
similar.
Mostly untested.
Normally, the first sub-stream is implicitly created. This change lets
the user use more orthogonal syntax, and use a new_stream header for
every sub-stream, instead of having to skip the header for the first
one.
Add a mp_log context to the parse_edl() function, and report some
errors. Previously, this just told you that something was wrong. Add
some error reporting to make it slightly less evil.
Put all parameters in a list before processing them. This makes adding
parameters for special headers easier, and we can report parameters that
were not understood. (For "compatibility", which probably doesn't matter
at all, still don't count them as errors; as before.)
wm4
mg
xPMo