Move the definitions of all special key codes (those not passed by
ASCII value) to input/keycodes.h. Before they were spread between
osdep/keycodes.h, input/joystick.h, input/mouse.h and input/ar.h, plus
some special values in input.h. This was especially inconvenient as
the codes had to be coordinated to not conflict between the files.
The change requires a bit of ugliness as appleir.c includes
<linux/input.h> which contains various conflicting KEY_* definitions.
Work around this by adding a special preprocessor variable which can
be used to avoid defining these in keycodes.h.
Setup default speex modes, allows decoding of speex in flv which does
not contain a header packet.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33327 b3059339-0415-0410-9bf9-f77b7e298cf2
Simplify by using FFMAX3.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33300 b3059339-0415-0410-9bf9-f77b7e298cf2
Simplify colormap generation code, avoid some mallocs and add frees
for one error case.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33302 b3059339-0415-0410-9bf9-f77b7e298cf2
Use memcpy_pic instead of reimplementing it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33303 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow DR to work with reget_buffer when no buffer_hints are set.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33287 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow reget_buffer to somewhat work after direct rendering failure.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33286 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not try to set up the FS segment when using quicktime to decode,
it makes no sense to do that.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33259 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix artefacts at right border of scaled bitmap subtitles by clearing
the destination to 0 first if the width is not a multiple of 8.
This is necessary because some of the optimized sub drawing functions
always draw pixels in multiples of 8, so we cannot rely on any "dirt"
in the "unused" borders being ignored.
Note that due to the way rendering works, both alpha and the image need
to be cleared.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33230 b3059339-0415-0410-9bf9-f77b7e298cf2
Add dummy -shuffle and -noshuffle options so they appear in
-list-options output. These features are not implemented as options;
rather they're features of the command line parser.
Also add the CONF_NOCFG flag to the existing playlist option, which is
a similar placeholder for a command line parser feature.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33147 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33148 b3059339-0415-0410-9bf9-f77b7e298cf2
Ensure we always pass a buffer of at least sector size to the read
function. This is never an issue with streams that have actual
sectors, as the reads will always return a multiple of sector size and
the cache is always used in blocks of sector size. However the rtp
protocol misuses this so it can just assume it always has a
sufficiently large buffer available and thus fails without this extra
hack.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33120 b3059339-0415-0410-9bf9-f77b7e298cf2
The input code read at most one event per input or command fd. If this
event was not bound to any recognized command then no command was
returned, and higher-level code could not distinguish this case from
there being no pending events left. As a result unbound events would
cause extra latency in event processing. Change the input code to
continue reading events until it either finds one that maps to a
command or hits EOF/error.
getch2.c did not make stdin non-blocking, and relied on only being
called after select() had shown readability. Stop relying on that
assumption and set stdin to non-blocking mode. Hopefully no relevant
platform has problems with this...
Commit a2d28010cc ("cleanup: find_subfiles.c: simplify (mainly using
bstr)") was missing a bstrdup() in subtitle search code, and thus the
code erroneously modified the original filename string passed in. As a
result anything which printed or otherwise used the filename after
that would use a lowercase-converted version instead of the actual
file name. Fix by adding the bstrdup() to operate on a local copy of
the name instead.
Many video filters failed to calculate or even just pass through pts
values for their output frames. Fix this, and also make the two
remaining filters that called vf_next_put_image() twice for the same
input frame (vf_softpulldown, vf_telecine) use vf_queue_frame() so
that e.g. framestepping properly sees both frames.
Changed filters: vf_bmovl, vf_detc, vf_divtc, vf_filmdint, vf_ivtc,
vf_lavc, vf_phase, vf_pullup, vf_softpulldown, vf_telecine, vf_tile,
vf_tinterlace.
Change BSTR() from a macro producing a compound literal to an inline
function returning the same value. This works for all existing uses,
and avoids a warning from BSTR(NULL) (the macro expansion contained
strlen(NULL); this was valid code because the strlen call was never
evaluated, but still triggered a GCC warning).
The input loop select() call was only run if there was at least one
input file descriptor. However other code uses the input loop to wait;
this could result in the wait becoming a busy loop when running with
-noconsolecontrols (without that there is at least one input fd for
terminal input). Make the input loop call select() to sleep even if
there are no input file descriptors.
Commit cbeed30ae8 ("core: wake up a bit less often for audio-only
files") increased the sleep time between audio buffer fills. This
turned out to cause problems on some machines where available audio
buffer sizes are extremely limited (example cases included 85 ms for
stereo and less for multichannel audio). Change the code to check
the amount of buffered audio and shorten sleep times accordingly if
needed.
Such short buffers violate some assumptions made by video timing code,
so they may still cause visible problems in some cases. At least on
some machines using ALSA the problem seems to be caused by bad
configuration defaults (small buffer memory limit which can be
increased).
Change the behavior of the iconv, freetype, fontconfig and libass
tests when autodetection fails. They now abort instead of silently
creating a crippled build. Users who really want to build without
those features can use explicit --disable flags.
If --enable-3dfx is specified but dga is not available then 3dfx is
disabled nonetheless. However, this disabling is not done properly,
and libvo/vo_3dfx.c is still compiled (but cannot be used). Fix.
The behavior of automatically disabling vo_3dfx despite --enable-3dfx
is itself questionable, but I'm not changing that now.
Update various code to use newer alternatives instead of deprecated
functions/fields that are being dropped at libav API bump. An
exception is avcodec_thread_init() which is being dropped even though
it's still _necessary_ with fairly recent libav versions, so there's
no good alternative which would work with both those recent versions
and latest libavcodec. I think there are grounds to consider the drop
premature and revert it for now; if that doesn't happen I'll add a
version-test #if check around it later.
For some reason the -lavfdopts option was documented under MEncoder
options (despite not being MEncoder-specific), and was removed
together with MEncoder documentation in commit d76ad5f227. Restore the
documentation and convert it from its own section to normal option
documentation form. Also fix the example to actually work with current
lavf.
A file with the ambiguous extension .sub could be either VOBsub or
MicroDVD. If there's a corresponding .idx file it's certainly VOBsub,
so don't add it to the list of potential text subtitles. This will
avoid the annoying warning "SUB: Could not determine file format".
Allow specifying a custom separator character for options of string
list type, and use that to define OPT_PATHLIST which takes a list of
strings separated by ':' (or ';' on Windows).
Analogously to the previous commit, move path handling logic for
loading external vobsub files from mplayer.c to find_subfiles.c.
Based on a commit from Clément Bœsch but fixed and simplified.
Move path handling for loading external subtitle files from mplayer.c
to find_subfiles.c. Now the remaining code in mplayer.c only gets a
list of potential filenames and tries opening those.
Move sub_filenames() and related code from subreader.c to new file
find_subfiles.c. This function is used to find subtitle files that
should be loaded for the current video; this functionality is not
specific to the particular kind of text subtitle handling implemented
in subreader.c.
Also reindent and prettify the moved code a bit.
