We will need the full ra_ctx to be able to look up all the state
required to initialise an ffmpeg vulkan hwcontext, so pass let's
pass the ra_ctx instead of just the ra.
This adds cache as a possible path for mpv to internally pick
(~/.cache/mpv for non-darwin unix-like systems, the usual config
directory for everyone else). For gpu shader cache and icc cache,
controlling whether or not to write such files is done with the new
--gpu-shader-cache and --icc-cache options respectively. Additionally,
--cache-on-disk no longer requires explicitly setting the --cache-dir
option. The old options, --cache-dir, --gpu-shader-cache-dir, and
--icc-cache-dir simply set an override for the directory to save cache
files. If unset, then the cache is saved in XDG_CACHE_HOME.
c784820454 introduced a bool option type
as a replacement for the flag type, but didn't actually transition and
remove the flag type because it would have been too much mundane work.
This is a very simple but easy way of doing it. Ideally, it would be
nice if we could also add some sort of introspection about shader
parameters at runtime, ideally exposing the entire list of parameters as
a custom property dict. But that is a lot of effort for dubious gain.
It's worth noting that, as currently implemented, re-setting
`glsl-shader-opts` to a new value doesn't reset back previously mutated
values to their defaults.
When I introduced the concept of lazy loading of hwdecs by img format,
I did not propagate the probing flag correctly, leading to the new
normal loading path not runnng with probing set, meaning that any
errors would show up, creating unnecessary noise.
This change fixes this regression.
So I can reuse it in vo_gpu_next without having to reinvent the wheel.
In theory, a lot of the stuff could be made more private inside the
hwdec code itself, but for the time being I don't care about refactoring
this code, merely sharing it.
Historically, we have treated hwdec interop loading as a completely
separate step from loading the hwdecs themselves. Some hwdecs need an
interop, and some don't, and users generally configure the exact
hwdec they want, so interops that aren't relevant for that hwdec
shouldn't be loaded to save time and avoid warning/error spam.
The basic approach here is to recognise that interops are tied to
hwdecs by imgfmt. The hwdec outputs some format, and an interop is
needed to get that format to the vo without read back.
So, when we try to load an hwdec, instead of just blindly loading all
interops as we do today, let's pass the imgfmt in and only load
interops that work for that format. If more than one interop is
available for the format, the existing logic (whatever it is) will
continue to be used to pick one.
We also have one callsite in filters where we seem to pre-emptively
load all the interops. It's probably possible to trace down a specific
format but for now I'm just letting it keep loading all of them; it's
no worse than before.
You may notice there is no documentation update - and that's because
the current docs say that when the interop mode is `auto`, the interop
is loaded on demand. So reality now reflects the docs. How nice.
This merges the old desaturation control options into a single
enumeration, with the goal of both simplifying how these options work
and also making this list more extensible (including, notably, new
options only supported by vo_gpu_next).
For the hybrid option, I decided to port the (slightly tweaked) values
from libplacebo's pre-refactor defaults, rather than the old values we
had in mpv, to more visually match the look of the vo_gpu_next hybrid.
Merge --gamut-clipping and --gamut-warning into a single option,
--gamut-mapping-mode, better corresponding to the new vo_gpu_next APIs
and allowing us to easily extend this option as new modes are added in
the future.
Implementation copy/pasted from:
https://code.videolan.org/videolan/libplacebo/-/commit/f793fc0480f
This brings mpv's tone mapping more in line with industry standard
practices, for a hopefully more consistent result across the board.
Note that we ignore the black point adjustment of the tone mapping
entirely. In theory we could revisit this, if we ever make black point
compensation part of the mpv rendering pipeline.
Pretty annoying affair. The vo_gpu code could of course not trigger
rendering from filters yet, so it needed to be extended. Also, this uses
some icky stuff made for vf_sub (and this was the reason I marked vf_sub
as deprecated), so everything is terrible.
This is a straightforward parallel implementation of error diffusion
algorithms in compute shader. Basically we use single work group with
maximal possible size to process the whole image. After a shift
mapping we are able to process all pixels column by column.
A large ring buffer are allocated in shared memory to speed things up.
However the size of required shared memory depends linearly on the
height of video window (or screen height in fullscreen mode). In case
there is no enough shared memory, it will fallback to `--dither=fruit`.
The maximal allowed work group size is hardcoded as 1024. Ideally we
could query `GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS`. But for whatever
reason, it seems most high end card from nvidia and amd support only
the minimal required value, so I guess we can stick to it for now.
Rather than the linear cd/m^2 units, these (relative) logarithmic units
lend themselves much better to actually detecting scene changes,
especially since the scene averaging was changed to also work
logarithmically.
In theory our "eye adaptation" algorithm works in both ways, both
darkening bright scenes and brightening dark scenes. But I've always
just prevented the latter with a hard clamp, since I wanted to avoid
blowing up dark scenes into looking funny (and full of noise).
But allowing a tiny bit of over-exposure might be a good thing. I won't
change the default just yet (better let users test), but a moderate
value of 1.2 might be better than the current 1.0 limit. Needs testing
especially on dark scenes.
The previous approach of using an FIR with tunable hard threshold for
scene changes had several problems:
- the FIR involved annoying hard-coded buffer sizes, high VRAM usage,
and the FIR sum was prone to numerical overflow which limited the
number of frames we could average over. We also totally redesign the
scene change detection.
- the hard scene change detection was prone to both false positives and
false negatives, each with their own (annoying) issues.
Scrap this entirely and switch to a dual approach of using a simple
single-pole IIR low pass filter to smooth out noise, while using a
softer scene change curve (with tunable low and high thresholds), based
on `smoothstep`. The IIR filter is extremely simple in its
implementation and has an arbitrarily user-tunable cutoff frequency,
while the smoothstep-based scene change curve provides a good, tunable
tradeoff between adaptation speed and stability - without exhibiting
either of the traditional issues associated with the hard cutoff.
Another way to think about the new options is that the "low threshold"
provides a margin of error within which we don't care about small
fluctuations in the scene (which will therefore be smoothed out by the
IIR filter).
Instead of desaturating towards luma, we desaturate towards the
per-channel tone mapped version. This essentially proves a smooth
roll-off towards the "hollywood"-style (non-chromatic) tone mapping
algorithm, which works better for bright content, while continuing to
use the "linear" style (chromatic) tone mapping algorithm for primarily
in-gamut content.
We also split up the desaturation algorithm into strength and exponent,
which allows users to use less aggressive desaturation settings without
affecting the overall curve.
Since linear downscaling makes sense to handle independently from
linear/sigmoid upscaling, we split this option up. Now,
linear-downscaling is its own option that only controls linearization
when downscaling and nothing more. Likewise, linear-upscaling /
sigmoid-upscaling are two mutually exclusive options (the latter
overriding the former) that apply only to upscaling and no longer
implicitly enable linear light downscaling as well.
The old behavior was very confusing, as evidenced by issues such
as #6213. The current behavior should make much more sense, and only
minimally breaks backwards compatibility (since using linear-scaling
directly was very uncommon - most users got this for free as part of
gpu-hq and relied only on that).
Closes#6213.
This solves a number of problems simultaneously:
1. When outputting HLG, this allows tuning the OOTF based on the display
characteristics.
2. When outputting PQ or other HDR curves, this allows soft-limiting the
output brightness using the tone mapping algorithm.
3. When outputting SDR, this allows HDR-in-SDR style output, by
controlling the output brightness directly.
Closes#5521
Using the GL renderer for color conversion will make sure screenshots
will use the same conversion as normal video rendering. It can do this
for all types of screenshots.
The logic when to write 16 bit PNGs changes. To approximate the old
behavior, we decide by looking whether the source video format has more
than 8 bits per component. We apply this logic even for window
screenshots. Also, 16 bit PNGs now always include an unused alpha
channel. The reason is that FFmpeg has RGB48 and RGBA64 formats, but no
RGB064. RGB48 is 3 bytes and usually not supported by GPUs for
rendering, so we have to use RGBA64, which forces an alpha channel.
Will break for users who use --target-trc and similar options.
I considered creating a new gl_video context, but it could double GPU
memory use, so I didn't.
This uses FBOs instead of glGetTexImage(), because that increases the
chance it could work on GLES (e.g. ANGLE). Untested. No support for the
Vulkan and D3D11 backends yet.
Fixes#5498. Also fixes#5240, because the code for reading back is not
used with the new code path.
The major changes are as follows:
1. Use `uint32_t` instead of `unsigned int` for the SSBO size
calculation. This doesn't really matter, since a too-big buffer will
still work just fine, but since `uint` is a 32-bit integer by
definition this is the correct way to do it.
2. Pre-divide the frame_sum by the num_wg immediately at the end of a
frame. This change was made to prevent overflow. At 4K screen size,
this code is currently already very at risk of overflow, especially
once I started playing with longer averaging sizes. Pre-dividing this
out makes it just about fit into 32-bit even for worst-case PQ
content. (It's technically also faster and easier this way, so I
should have done it to begin with). Rename `frame_sum` to `frame_avg`
to clearly signal the change in semantics.
3. Implement a scene transition detection algorithm. This basically
compares the current frame's average brightness against the
(averaged) value of the past frames. If it exceeds a threshold, which
I experimentally configured, we reset the peak detection SSBO's state
immediately - so that it just contains the current frame. This
prevents annoying "eye adaptation"-like effects on scene transitions.
4. As a result of the previous change, we can now use a much larger
buffer size by default, which results in a more stable and less
flickery result. I experimented with values between 20 and 256 and
settled on the new value of 64. (I also switched to a power-of-2
array size, because I like powers of two)
The current peak detection algorithm was very bugged (which contributed
to the excessive cross-frame flicker without long normalization) and
also didn't take into account the frame average brightness level.
The new algorithm both takes into account frame average brightness (in
addition to peak brightness), and also computes the values in a more
stable/correct way. (The old path was basically undefined behavior)
In addition to improving the algorithm, we also switch to hable tone
mapping by default, and try to enable peak computation automatically
whever possible (compute shaders + SSBOs supported). We also make the
desaturation milder, after extensive testing during libplacebo
development.
I also had to compensate a bit for the representational differences
between mpv and libplacebo (libplacebo treats 1.0 as the reference peak,
but mpv treats it as the nominal peak), but it shouldn't have caused any
problems.
This is still not quite the same as libplacebo, since libplacebo also
allows tagging the desired scene average brightness on the output, and
it also supports reading the scene average brightness from static
metadata (MaxFALL) where available. But those changes are a bit more
involved. It's possible we could also read this from metadata in the
future, but we have problems communicating with AVFrames as it is and I
don't want to touch the mpv colorimetry structs for the time being.
Make the VO<->decoder interface capable of supporting multiple hwdec
APIs at once. The main gain is that this simplifies autoprobing a lot.
Before this change, it could happen that the VO loaded the "wrong" hwdec
API, and the decoder was stuck with the choice (breaking hw decoding).
With the change applied, the VO simply loads all available APIs, so
autoprobing trickery is left entirely to the decoder.
In the past, we were quite careful about not accidentally loading the
wrong interop drivers. This was in part to make sure autoprobing works,
but also because libva had this obnoxious bug of dumping garbage to
stderr when using the API. libva was fixed, so this is not a problem
anymore.
The --opengl-hwdec-interop option is changed in various ways (again...),
and renamed to --gpu-hwdec-interop. It does not have much use anymore,
other than debugging. It's notable that the order in the hwdec interop
array ra_hwdec_drivers[] still matters if multiple drivers support the
same image formats, so the option can explicitly force one, if that
should ever be necessary, or more likely, for debugging. One example are
the ra_hwdec_d3d11egl and ra_hwdec_d3d11eglrgb drivers, which both
support d3d11 input.
vo_gpu now always loads the interop lazily by default, but when it does,
it loads them all. vo_opengl_cb now always loads them when the GL
context handle is initialized. I don't expect that this causes any
problems.
It's now possible to do things like changing between vdpau and nvdec
decoding at runtime.
This is also preparation for cleaning up vd_lavc.c hwdec autoprobing.
It's another reason why hwdec_devices_request_all() does not take a
hwdec type anymore.
With video paused, changing the brightness controls (or similar) would
sometimes not rerender the video frame. So the OSD would redraw, but the
video wouldn't change. This is caused by output caching, and a redraw
request is free to return the cached frame. Change it such to invalidate
the cached frame if any of the options or the equalizer change.
In theory, gl_video_reset_surfaces() could be called if the equalizer
changes - this would apparently force interpolatzion to redraw all
frames. But this looks kind of crappy when changing the equalizer during
playback. It'll "eventually" use the correct settings anyway, and when
paused interpolation is off.
This has several advantages:
1. no more redundant texcoords when we don't need them
2. no more arbitrary limit on how many textures we can bind
3. (that extends to user shaders as well)
4. no more arbitrary limits on tscale radius
To realize this, the VAO was moved from a hacky stateful approach
(gl_sc_set_vertex_attribs) - which always bothered me since it was
required for compute shaders as well even though they ignored it - to be
a proper parameter of gl_sc_dispatch_draw, and internally plumbed into
gl_sc_generate, which will make a (properly mangled) deep copy into
params.vertex_attribs.
Due to the plethora of historical baggage from different eras getting
confusing, I decided to simplify and unify the struct organization and
naming scheme.
Structs that got renamed:
1. fbodst -> ra_fbo (and moved to gpu/context.h)
2. fbotex -> removed (redundant after 2af2fa7a)
3. fbosurface -> surface
4. img_tex -> image
In addition to these structs being renamed, all of the names have been
made consistent. The new scheme is as follows:
struct image img;
struct ra_tex *tex;
struct ra_fbo fbo;
This also affects derived names, e.g. indirect_fbo -> indirect_tex.
Notably also, finish_pass_fbo -> finish_pass_tex and finish_pass_direct
-> finish_pass_fbo.
The new equivalent of fbotex_change() is called ra_tex_resize().
This commit (should) contain no logic changes, just renaming a bunch of
crap.
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
Philip Langdale
Niklas Haas
Dudemanguy
Christoph Heinrich
Niklas Haas
wm4
Bin Jin