With the internal change from stringlist to keyvaluelist, these
sub-options stop working. I don't really care enough to bring them
back. (Order doesn't matter, -del always seemed annoying.)
We are currently using primary / overlay planes drm objects, assuming that primary plane is osd and overlay plane is video.
This commit is doing two things :
- replace the primary / overlay planes members with osd and video planes member without the assumption
- Add two more options to determine which one of the primary / overlay is associated to osd / video.
- It will default osd to overlay and video to primary if unspecified
That new API was introduced and allows to have several native resources.
Thisuses that mechanisma for drm resources rather than the deprecated
opengl-cb structs.
This patch therefore add two structs that can be used with the drm atomic interop.
- mpv_opengl_drm_params : which will hold all the drm handles
- mpv_opengl_drm_osd_size : which will hold osd layer size
This commit adds a drm-osd-size=WxH parameter to commandline which
allows to define the OSD plane dimension. OSD can be upscaled to
screen resolution when having OSD at video resolution is too heavy.
This is especially useful for UHD modes on embedded devices where
the GPU cannot handle UHD modes at a decent framerate.
Instead of using an internal counter to keep track of the value that was
set last, attempt to find the current value of the property/option in
the value list, and then set the next value in the list.
There are some potential problems. If a property refuses to accept a
specific value, the cycle-values command will fail, and start from the
same position again. It can't know that it's supposed to skip the next
value. The same can happen to properties which behave "strangely", such
as the "aspect" property, which will return the current aspect if you
write "-1" to it. As a consequence, cycle-values can appear to get
"stuck".
I still think the new behavior is what users expect more, and which is
generally more useful. We won't restore the ability to get the old
behavior, unless we decide to revert this commit entirely.
Fixes#5772, and hopefully other complaints.
The main change is that we wait with opening the muxer ("writing
headers") until we have data from all streams. This fixes race
conditions at init due to broken assumptions in the old code.
This also changes a lot of other stuff. I found and fixed a few API
violations (often things for which better mechanisms were invented, and
the old ones are not valid anymore). I try to get away from the public
mutex and shared fields in encode_lavc_context. For now it's still
needed for some timestamp-related fields, but most are gone. It also
removes some bad code duplication between audio and video paths.
Attempts to enable the following things:
- let a render API user do "proper" audio-sync video timing itself
- make it possible to not re-render repeated frames if the API user has
better mechanisms available (e.g. waiting for a DisplayLink cycle
instead)
- allow the user to delay or skip redraws if it makes sense
Basically this information will be needed by API users who want to be
"clever" about optimizing timing and rendering.
DR (letting the decoder allocate texture memory) requires running the
allocation on the render thread. This is rather hard with the render
API, because the user controls this thread and when it's entered. It was
not possible until now.
This commit adds a bunch of infrastructure to make this possible. We add
a new optional mode (MPV_RENDER_PARAM_ADVANCED_CONTROL) which basically
lets the user's render thread and libmpv agree how this should be done.
Misuse would lead to deadlocks. To make this less likely, strictly
document thread safety/locking issues. In particular, document which
libmpv functions can be called without issues. (The rest has to be
assumed unsafe.)
The worst issue is destruction of the render context while video is
still active. To avoid certain unintended recursive locks (i.e.
deadlocks, unless we'd make the locks recursive), make the update
callback lock separate. Make "killing" the video chain asynchronous, so
we can do extra work while video is being destroyed.
Because losing wakeups is a big deal, setting the update callback now
triggers a wakeup. (It would have been better if the wakeup callback
were a parameter to mpv_render_context_create(), but too late.)
This commit does not add DR yet; the following commit does this.
Fundamentally, scripts are loaded asynchronously, but as a feature,
there was code to wait until a script is loaded (for a certain arbitrary
definition of "loaded"). This was done in scripting.c with the
wait_loaded() function.
This called mp_idle(), and since there are commands to load/unload
scripts, it meant the player core loop could be entered recursively. I
think this is a major complication and has some problems. For example,
if you had a script that does 'os.execute("sleep inf")', then every time
you ran a command to load an instance of the script would add a new
stack frame of mp_idle(). This would lead to some sort of reentrancy
horror that is hard to debug. Also misc/dispatch.c contains a somewhat
tricky mess to support such recursive invocations. There were also some
bugs due to this and due to unforeseen interactions with other messes.
This scripting stuff was the only thing making use of that reentrancy,
and future commands that have "logical" waiting for something should be
implemented differently. So get rid of it.
Change the code to wait only in the player initialization phase: the
only place where it really has to wait is before playback is started,
because scripts might want to set options or hooks that interact with
playback initialization. Unloading of builtin scripts (can happen with
e.g. "set osc no") is left asynchronous; the unloading wasn't too robust
anyway, and this change won't make a difference if someone is trying to
break it intentionally. Note that this is not in mp_initialize(),
because mpv_initialize() uses this by locking the core, which would have
the same problem.
In the future, commands which logically wait should use different
mechanisms. Originally I thought the current approach (that is removed
with this commit) should be used, but it's too much of a mess and can't
even be used in some cases. Examples are:
- "loadfile" should be made blocking (needs to run the normal player
code and manually unblock the thread issuing the command)
- "add-sub" should not freeze the player until the URL is opened (needs
to run opening on a separate thread)
Possibly the current scripting behavior could be restored once new
mechanisms exist, and if it turns out that anyone needs it.
With this commit there should be no further instances of recursive
playloop invocations (other than the case in the following commit),
since all mp_idle()/mp_wait_events() calls are done strictly from the
main thread (and not commands/properties or libmpv client API that
"lock" the main thread).
The first change is about spdif - I mostly ignore spdif issues these
days, but it seems like the recent changes made handling of it slightly
better (but I didn't really test).
The second change is about broken libavfilter filters. We won't restore
the old behavior, because people were complaining about the old behavior
in the past. Possibly we could make libavfilter export this was metadata
and use the old behavior if we know they're broken - but it doesn't
exist yet.
Until recently, the AO was reinitialized strictly only on decoder format
changes. But the commit for simplifying audio format negotiation removed
this. Now the AO is recreated for any format change.
This is sort of annoying if you change playback speed. The
insertion/removal of af_scaletempo can change the sample format. For
example, the acompressor filter will convert output to double, so
toggling scaletempo will force the format back to float. This recreates
the AO under the --gapless-audio=weak default. This likely affects a lot
of other filters too.
Work this around by allowing sample format changes, and keeping the
current AO format in these cases. This is probably not a big problem.
Most audio APIs force the output format to float anyway.
This means you actually have to worry about what the default gapless
mode does to your audio. If you start with a file that uses 8 bit per
sample, and then continue playing a 24 bit FLAC, it will be converted
down to 8 bit per sample. (Assuming they are played in a way that uses
the gapless logic.)
One can now set the number of buffers and the buffer size.
This can reduce the CPU usage and the total latency stays mostly the same.
As there are sync mechanisms the A/V sync continue intact and working.
It also modifies 6.1 channel order, as per OpenAL spec
and add AOPLAY_FINAL_CHUNK support
Uses OpenAL Soft's AL_DIRECT_CHANNELS_SOFT extension and can be controlled through
a new CLI option, --openal-direct-channels.
This allows one to send the audio data direrctly to the desired channel without
effects applied.
Due to earlier misinterpretation of the Lua docs as if mp.register_idle
registers a one-shot callback, the JS docs suggested to use setTimeout.
But the behavior and Lua docs are such that it's a repeating callback
which fires just before the script thread goes to sleep.
Implement it for JS too.
As it turns out, there are multiple libmpv users who saw a need to
use the hook API. The API is kind of shitty and was never meant to be
actually public (it was mostly a hack for the ytdl script).
Introduce a proper API and deprecate the old one. The old one will
probably continue to work for a few releases, but will be removed
eventually.
There are some slight changes to the old API, but if a user followed
the manual properly, it won't break.
Mostly untested. Appears to work with ytdl_hook.
Hardware decoding things often need access to additional handles from
the windowing system, such as the X11 or Wayland display when using
vaapi. The opengl-cb had nothing dedicated for this, and used the weird
GL_MP_MPGetNativeDisplay GL extension (which was mpv specific and not
officially registered with OpenGL).
This was awkward, and a pain due to having to emulate GL context
behavior (like needing a TLS variable to store context for the pseudo GL
extension function). In addition (and not inherently due to this), we
could pass only one resource from mpv builtin context backends to
hwdecs. It was also all GL specific.
Replace this with a newer mechanism. It works for all RA backends, not
just GL. the API user can explicitly pass the objects at init time via
mpv_render_context_create(). Multiple resources are naturally possible.
The API uses MPV_RENDER_PARAM_* defines, but internally we use strings.
This is done for 2 reasons: 1. trying to leave libmpv and internal
mechanisms decoupled, 2. not having to add public API for some of the
internal resource types (especially D3D/GL interop stuff).
To remain sane, drop support for obscure half-working opengl-cb things,
like the DRM interop (was missing necessary things), the RPI window
thing (nobody used it), and obscure D3D interop things (not needed with
ANGLE, others were undocumented). In order not to break ABI and the C
API, we don't remove the associated structs from opengl_cb.h.
The parts which are still needed (in particular DRM interop) needs to be
ported to the render API.
It's a WTF that we have something as specific in the API. It could be
argued that we should provide helpers for other language and GUI toolkit
combinations. Obviously that's not going to scale, and it's somewhat
likely that it will bitrot. The rest is said in the API changelog.
Before this change, mpv_wait_event() could inconsistently return
multiple MPV_EVENT_SHUTDOWN events to a single mpv_handle, up to the
point of spamming the event queue under certain circumstances. Change
this and just send it exactly once to each mpv_handle.
Some client API users might have weird requirements about destroying
their state asynchronously (and not reacting immediately to the SHUTDOWN
event). This change will help a bit to make this less weird and
surprising.
This changes how mpv_terminate_destroy() and mpv_detach_destroy()
behave. The doxygen in client.h tries to point out the differences. The
goal is to make this more useful to the API user (making it behave like
refcounting).
This will be refined in follow up commits.
Initialization is unfortunately closely tied to termination, so that
changes as well. This also removes earlier hacks that make sure that
some parts of FFmpeg initialization are run in the playback thread
(instead of the user's thread). This does not matter with standard
FFmpeg, and I have no reason to care about this anymore.
This adds key bindings for some semi-popular features. It also tries to
cleanup some old bindings. For example w/e for panscan is now changed to
w/W. In all cases, the old bindings are still kept and work, though.
Part of an ongoing attempt to cleanup the default key bindings.
See #973 for some context.
The playback start logic explicitly waits until the first frame has been
displayed. Usually this will introduce a wait of 1 vsync. For normal
playback this doesn't matter, but with respect to low latency needs,
this only leads to additional data getting queued up in the demuxer or
network buffers.
Another thing is that the timing logic decodes 1 frame ahead (= 1 frame
extra latency) to determine the exact duration of a frame.
To be fair, there doesn't really seem to be a hard reason why this is
needed. With the current code, enabling the option does lead to A/V
desync sometimes (if the demuxer FPS is too inaccurate), and also frame
drops at playback start in some situations. But this all seems to be
avoidable, if the timing logic were to be rewritten completely, which
should probably happen in the future. Thus the new option comes with the
warning that it can be removed any time. This is also why the option has
"hack" in the name.
Well I guess it doesn't help that much.
Also add some stuff that might help to the manpage.
The fundamental problem with some "live" sources (e.g. x11grab) is
actually that the player gets behind initially, and never thinks it has
to catch up. This is also why --untimed can help.
