This fixes the -subfps option (which unfortunately is still useful),
and fixes minor annoying timing errors (which unfortunately still
happen).
Note that none of these affect ASS or image subtitles. ASS is specially
handled: libass loads subtitles as ASS_Track. There are no actual
packets passed around, and sd_ass just uses the ASS_Track.
Disable the --sub-no-text-pp option. It's misleading now and always was
completely useless.
Basically rewrite all the code supporting the cache (i.e. anything other
than the ringbuffer logic). The underlying design is untouched.
Note that the old cache2.c (on which this code is based) already had a
threading implementation. This was mostly unused on Linux, and had some
problems, such as using shared volatile variables for communication and
uninterruptible timeouts, instead of using locks for synchronization.
This commit does use proper locking, while still retaining the way the
old cache worked. It's basically a big refactor.
Simplify the code too. Since we don't need to copy stream ctrl args
anymore (we're always guaranteed a shared address space now), lots of
annoying code just goes away. Likewise, we don't need to care about
sector sizes. The cache uses the high-level stream API to read from
other streams, and sector sizes are handled transparently.
The core didn't use these fields, and use of them was inconsistent
accross AOs. Some didn't use them at all. Some only set them; the values
were completely unused by the core. Some made full use of them.
Remove these fields. In places where they are still needed, make them
private AO state.
Remove the --abs option. It set the buffer size for ao_oss and ao_dsound
(being ignored by all other AOs), and was already marked as obsolete. If
it turns out that it's still needed for ao_oss or ao_dsound, their
default buffer sizes could be adjusted, and if even that doesn't help,
AO suboptions could be added in these cases.
This allows having properties like time-pos in the window title update
properly. There is a danger of this causing significant CPU usage,
depending on the properties used and the window manager.
The use of filters prior to PNG compression can greatly improve
compression ratio, with "mixed" (ImageMagick calls it "adaptive")
typically achieving the best results.
Use the recently introduced screensaver VOCTRLs to control the
screensaver in the X11 backend. This means the behavior when paused
changes: the old code always kept the screensaver disabled, but now the
screensaver is reenabled on pausing.
Rename the --stop-xscreensaver option to --stop-screensaver and make it
more generic. Now it affects all backends that respond to the
screensaver VOCTRLs.
Whatever this was supposed to be originally, it doesn't have much value
anymore. It just forced ad_mpg123 to upmix mono to stereo by default
(the audio chain can do that). As an option, it was mostly useless and
misleading, so get rid of it.
The additional flags are needed to get the muxer to write the source
video frame rate (instead of a fallback) for 100% equivalence to the
replaced MPlayer/mplayer2 y4m writer.
show_chapters, show_tracks, and show_playlist are killed and replaced
with the properties chapter-list, track-list, and playlist. The code
and the output of these stays the same, this is just moving a lot of
code around and reducing the number of properties.
The "old" commands will still be supported for a while (to avoid making
everyone angry), so handle them with the legacy layer. Add something to
suppress printing the legacy warnings for these commands.
This commit addresses some issues with the users had with the previous
implementation in commit c39efb9. Here's the changes:
* Use Quartz Event Taps to remove Media Key events mpv handles from
the global OS X queue. This prevents conflicts with iTunes. I did this on
the main thread since it is mostly idling. It's the playloop thread that
actually does all the work so there is no danger of blocking the event tap
callback.
* Introduce `--no-media-keys` switch so that users can disable all of mpv's
media key handling at runtime (some prefer iTunes for example).
* Use mpv's bindings so that users can customize what the media keys do via
input.conf. Current bindings are:
MK_PLAY cycle pause
MK_PREV playlist_prev
MK_NEXT playlist_next
An additional benefit of this implementation is that it is completly handled
by the `macosx_events` file instead of `macosx_application` making the
project organization more straightforward.
This branch heavily refactors the subtitle code (both loading and
rendering), and adds support for a few new formats through FFmpeg.
We don't remove any of the old code yet. There are still some subtleties
related to subreader.c to be resolved: code page detection & conversion,
timing post-processing, UTF-16 subtitle support, support for the -subfps
option. Also, SRT reading and loading ASS via libass should be turned
into proper demuxers. (SRT is needed because Libav's is gravely broken,
and we want ASS loading via libass to cover full libass format support.
Both should be demuxers which are probed _before_ libavformat, so that
all subtitles can be loaded through the demuxer infrastructure, and
libavformat subtitles don't need to be treated in a special way.)
The -no-ass option used to disable all use of libass completely. This
doesn't work this way anymore, and the text subtitle path has an
inherent dependency on libass. Currently -no-ass does 3 things:
1. Strip tags and formatting on display, and use a separate renderer for
the result. (Which might be the terminal, or libass via OSD code.)
2. Not loading attached fonts from Matroska files.
3. Use subreader.c instead of libass for reading .ass files.
1. and 2. are ok and what the user (probably wants), but 3. doesn't
really make sense anymore. subreader.c reads .ass files just fine, but
then does some strange things to them (something about coalescing and
re-adding newlines?), leading to even more broken display with -no-ass.
Instead of fighting with subreader.c, just use libass as loader.
After killing the non functional AR support in c8fd9e5 I got much complaints so
this adds AR support back in (and it works). I am using the HIDRemote class by
Felix Schwarz and that part of the code is under the BSD license. I slightly
modified it replacing [NSApplication sharedApplication] with NSApp. The code
of the class is quite complex (probably because it had to deal with all the
edge cases with IOKit) but it works nicely as a black box.
In a later commit I'll remove the deprecation warnings caused by HIDRemote's
usage of Gestalt.
Check out `etc/input.conf` for the default bindings.
Apple Remote functionality is automatically compiled in when cocoa is enabled.
It can be disabled at runtime with the `--no-ar` option.
Most of these are rather questionable, the rest you rarely need to set
manually. You still can set all of them with -lavdopts-o (because
libavcodec has AVOptions for them).
This can control whether demux_lavf should use the HTTP mime type to
determine the format, instead of probing the data with the libavformat
API. Do this to allow easier debugging in case the mimetype is
incorrect. (This is done only for AAC streams right now.)
This is basically a "do not use" label. We don't remove them yet,
because we still support FFmpeg releases where we can not use
libavfilter for various reasons. Also, Libav causes pain as usual
due to the lack of ported mplayer filters in its codebase, so not
all filters will be available there.
Use a different algorithm to generate the dithering matrix. This
looks much better than the previous ordered dither matrix with its
cross-hatch artifacts.
The matrix generation algorithm as well as its implementation was
contributed by Wessel Dankers aka Fruit. The code in dither.c is
his implementation, reformatted and with static global variables
removed by me.
The new matrix is uploaded as float texture - before this commit, it
was a normal integer fixed point matrix. This means dithering will
be disabled on systems without float textures.
The size of the dithering matrix can be configured, as the matrix is
generated at runtime. The generation of the matrix can take rather
long, and is already unacceptable with size 8. The default is at 6,
which takes about 100 ms on a Core2 Duo system with dither.c compiled
at -O2, which I consider just about acceptable.
The old ordered dithering is still available and can be selected by
putting the dither=ordered sub-option. The ordered dither matrix
generation code was moved to dither.c. This function was originally
written by Uoti Urpala.
Mostly copied from vf_lavfi. The parts that could be shared are minor,
because most code is about setting up audio and video, which are too
different.
This won't work with Libav. I used ffplay.c as guide, and noticed too
late that their setup methods are incompatible with Libav's. Trying to
make it work with both would be too much effort. The configure test for
av_opt_set_int_list() should disable af_lavfi gracefully when compiling
with Libav.
Due to option parser chaos, you currently can't have a "," as part of
the filter graph string - not even with quoting or escaping. This will
probably be fixed later.
The audio filter chain is not PTS aware. So we have to do some hacks
to make up a fake PTS, and we have to map the output PTS back to the
filter chain's method of tracking PTS changes and buffering, by
adjusting af->delay.
Can be used to refer to filters by name. Intended to be used when the
filter chain is changed at runtime.
A label can be assigned to a filter by prefixing it with '@name:', where
'name' is an user-chosen identifier. For example, a filter added with
'-vf-add @label1:gradfun=123' can be removed with '-vf-del @label1'.
If a filter with an already existing label is added, the existing filter
is replaced with the new filter (this happens for both -vf-add and
-vf-pre). If a filter is replaced, the new filter takes the position of
the old filter, instead of being appended/prepended to the filter chain
as usual. For -vf-toggle, labels are compared if at least one of the
filters has a label; otherwise they are compared by filter name and
arguments (like before). This means two filters are never considered
equal if one has a label and the other one does not.
Also add a "raw" prefix for commands, which prevents property expansion.
The idea is that if the commands are generated by a program, it doesn't
have to know whether the command expands properties or not.
Add the "vf" command, which allows changing the video filter chain at
runtime. For example, the 'y' key could be bound to toggle deinterlacing
by adding 'y vf toggle yadif' to the input.conf.
Reconfiguring the video filter chain normally resets the VO, so that it
will be "stuck" until a new video frame is rendered. To mitigate this, a
seek to the current position is issued when the filter chain is changed.
This is done only if playback is paused, because normal playback will
show an actual new frame quickly enough.
If vdpau hardware decoding is used, filter insertion (whether it fails
or not) will break the video for a while. This is because vo_vdpau
resets decoding related things on vo_config().
Apparently useful for dumping DVD. Could also be used to rip streams
with libquvi and such, but for that there are better tools. Actually
I doubt there aren't better tools to dump DVDs, but whatever, this was
a feature request, so I don't need a good reason.
This adds Mission Control fullscreen functionality to mpv. Since this doesn't
play well with many of mpv's features disable it by default. Users can activate
this feature by using `--native-fs` when starting mpv.
Fixes#34
A "watch later" command is now mapped to Shift+Q. This quits the player
and stores the playback state in a config file in ~/.mpv/watch_later/.
When calling the player with the same file again, playback is resumed
at that time position.
It's also possible to make mpv save playback state always on quit with
the --save-position-on-quit option. Likewise, resuming can be disabled
with the --no-resume-playback option.
This also attempts to save some playback parameters, like fullscreen
state or track selection. This will unconditionally override config
settings and command line options (which is probably not what you would
expect, but in general nobody will really care about this). Some things
are not backed up, because that would cause various problems. Additional
subtitle files, video filters, etc. are not stored because that would be
too hard and fragile. Volume/mute state are not stored because it would
mess up if the system mixer is used, or if the system mixer was
readjusted in the meantime.
Basically, the tradeoff between perfect state restoration and
complexity/fragility makes it not worth to attempt to implement
it perfectly, even if the result is a little bit inconsistent.
