Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
We handle picking out font attachments by mime type ourselves in a
higher level, so we really just want to use the mimetype. Also, Matroska
is currently the only code in libavformat which uses the fonts at all,
and we can drop use of the codec IDs completely.
Trying to handle such video is almost worthless, but it was requested by
at least 2 users.
If there are no timestamps, enable byte seeking by setting
ts_resets_possible. Use the video FPS (wherever it comes from) and the
audio samplerate for timing. The latter was already done by making the
first packet emit DTS=0; remove this again and do it "properly" in a
higher level.
This reverts commit c8f49be919.
Not needed anymore; fixed in all supported FFmpeg releases. Though I
could not test again, because all sample files are gone (oops).
Use the (relatively new) libavformat image format probing functionality,
instead of letting demux_mf guess by file extension and MIME type.
The libavformat support is weird, though. Traditionally, it uses an
absolutely terrible hack to detect images by extension, _and_ (which is
the horrible part) will randomly interpret parts of the filename as
specifiers for matching by number. So something like '%03d' will be
interpreted as placeholder for a frame number. The worst part is that
such character sequences can be perfectly valid and common in http URLs.
This is known as "image2" demuxer. The newer support, which probes by
examining the file header, is split into several format-specific
demuxers with names ending in "_pipe". So we check for such a name
suffix. (At this point we're doing fine-grained hacking around ffmpeg
weirdness, so a clean solution is impossible anyway until upstream
changes.)
Some of the hacks were not applied if the file format was forced. Commit
37a0c914 moved them to a table, which is checked with normal probing
only.
Fixes#1612 (DVD forces mpeg, which in turn has to export native stream
IDs specifically).
Do some code restructuring on the way. For example, the probescore can
simply be set to the correct initial value, instead of checking whether
it was set at all.
Whatever the hell that is. FFmpeg tries to open any files with .bin file
extension with this demuxer (unless it finds a better demuxer), and then
reads the whole damn file, along with spamming dumb crap.
Includes some logic for not starting the demuxer thread for fully read
subtitles. (Well, the cache will still waste _lots_ of resources, and
the cache always has to be created, because we don't know whether it'll
be needed _before_ opening the file.)
See #1597.
An attempt to make format-specifics more declarative. (In my opinion,
all of this should be either provided by libavformat, or should not be
needed.)
I'm still leaving many checks with matches_avinputformat_name(), because
they're so specific.
Also useful for the following commit.
The HLs protocol consists of a "playlist" main file, which mpv downloads
and passes to the HLS demuxer. The HLS demuxer actually requests segment
files containing media data on its own. The packets read from the
demuxer have a source file position set, but it's not from the main
file. This leads to a strange effect: as a last fallback, the player
will calculate the approximate playback position from the file
position/size ratio, and since the main file is tiny, this will always
show 100%. Fix this by resetting the packet file position.
This doesn't affect the case when HLS actually reports a duration.
This removes the delay when switching audio tracks in mkv or mp4 files.
Other formats are not enabled, because it's not clear whether the
demuxers fulfill the requirements listed in demux.h. (Many formats
definitely do not with libavformat.)
Background:
The demuxer packet cache buffers a certain amount of packets. This
includes only packets from selected streams. We discard packets from
other streams for various reasons. This introduces a problem: switching
to a different audio track introduces a delay. The delay is as big as
the demuxer packet cache buffer, because while the file was read ahead
to fill the packet buffer, the process of reading packets also discarded
all packets from the previously not selected audio stream. Once the
remaining packet buffer has been played, new audio packets are available
and you hear audio again.
We could probably just not discard packets from unselected streams. But
this would require additional memory and CPU resources, and also it's
hard to tell when packets from unused streams should be discarded (we
don't want to keep them forever; it'd be a memory leak).
We could also issue a player hr-seek to the current playback position,
which would solve the problem in 1 line of code or so. But this can be
rather slow.
So what we do in this commit instead is: we just seek back to the
position where our current packet buffer starts, and start demuxing from
this position again. This way we can get the "past" packets for the
newly selected stream. For streams which were already selected the
packets are simply discarded until the previous position is reached
again.
That latter part is the hard part. We really want to skip packets
exactly until the position where we left off previously, or we will skip
packets or feed packets to the decoder twice. If we assume that the
demuxer is deterministic (returns exactly the same packets after a seek
to a previous position), then we can try to check whether it's the same
packet as the one at the end of the packet buffer. If it is, we know
that the packet after it is where we left off last time.
Unfortunately, this is not very robust, and maybe it can't be made
robust. Currently we use the demux_packet.pos field as unique packet
ID - which works fine in some scenarios, but will break in arbitrary
ways if the basic requirement to the demuxer (as listed in the demux.h
additions) are broken. Thus, this is enabled only for the internal mkv
demuxer and the libavformat mp4 demuxer.
(libavformat mkv does not work, because the packet positions are not
unique. Probably could be fixed upstream, but it's not clear whether
it's a bug or a feature.)
Repurpose demuxer->filetype for this. It used to be used to print a
human readable format description; change it to a symbolic format name
and export it as property.
Unfortunately, libavformat has its own weird conventions, which are
reflected through the new property, e.g. the .mp4 case mentioned in the
manpage.
Fixes#1504.
Instead of defining a separate data structure in the core.
For some odd reason, demux_chapter exported the chapter time in
nano-seconds. Change that to the usual timestamps (rename the field
to make any code relying on this to fail compilation), and also remove
the unused chapter end time.
Basically, this will mark the demuxer as seekable with rtmp* and mmsh
protocols. These protocols have network-level time seeking, and whether
you can seek on the byte level does not matter.
Until now, seeking was typically only enabled because of the cache, and
a (nonsensical) warning was shown accordingly.
It still could happen that the server doesn't actually support thse
requests (or simply rejects them), so this is somewhat imperfect.
Apparently using the stream index is the best way to refer to the same
streams across multiple FFmpeg-using programs, even if the stream index
itself is rarely meaningful in any way.
For Matroska, there are some possible problems, depending how FFmpeg
actually adds streams. Normally they seem to match though.
Normally, we pass libavformat demuxers a wrapped mpv stream. But in some
cases, such as HLS and RTSP, we let libavformat open the stream itself.
In these cases, set typical network properties like useragent according
to the mpv options.
(We still don't set it for the cases where libavformat opens other
streams on its own, e.g. when opening the companion .sub file for .idx
files - not sure if we maybe should always set these options.)
Fixes opening some streams.
This means the HLS playlist will be opened twice, but that's not much of
a problem, considering it's pretty small, and HLS will make many other
http accesses anyway.
This code meant to flush demuxer internal buffers by doing a byte seek
to the current position. In theory this shouldn't drop any stream data.
However, if the stream positions mismatch, then avio_seek() (called by
av_seek_frame()) stops being a no-op, and might for example read some
data to skip to the seek target. (This can happen if the distance is
less than SHORT_SEEK_THRESHOLD.)
The positions get out of sync because we drop data at one point (which
is what we _want_ to do). Strictly speaking, the AVIOContext flushing is
done incorrectly, becuase pb->pos points to the start of the buffer, not
the current position. So we have to increment pb->pos by the buffered
amount.
Since there are other weird reasons why the positions might go out of
sync (such as stream_dvd.c dropping buffers itself), and they don't
necessarily need to be in sync in the first place unless AVIOContext has
nothing buffered internally, just use the sledgehammer approach and
correct the position manually.
Also run av_seek_frame() after this. Currently, it shouldn't read
anything, but who knows how that might change with future libavformat
development.
This whole change didn't have any observable effect for me, but I'm
hoping it fixes a reported problem.
When flushing the AVIOContext, make sure it can't seek back to discarded
data. buf_ptr is just the current read position, while buf_end - buffer
is the actual buffer size. Since mpegts.c is littered with seek calls,
it might be that the ability to seek could read
Mark the stream (which the demuxer uses) as not seekable. The cache can
enable seeking again (this behavior is sometimes useful for other
things). I think this should have had no bad influence in theory, since
seeking BD/DVD first does the "real" seek, then flushes libavformat and
reads new packets.
HLS streams as demuxed by libavformat have no track title metadata. So
show the HLS bitrate if no title is set. Could be useless or annoying,
so it's a bit controversial, I guess.
--hls-bitrate=min/max lets you select the min or max bitrate. That's it.
Something more sophisticated might be possible, but is probably not even
worth the effort.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
This is a simplification, because it lets us use the AVPacket
functions, instead of handling the details manually.
It also allows the libavcodec rawvideo decoder to use reference
counting, so it doesn't have to memcpy() the full image data. The change
in av_common.c enables this.
This change is somewhat risky, because we rely on the following AVPacket
implementation details and assumptions:
- av_packet_ref() doesn't access the input padding, and just copies the
data. By the API, AVPacket is always padded, and we violate this. The
lavc implementation would have to go out of its way to make this a
real problem, though.
- We hope that the way we make the AVPacket refcountable in av_common.c
is actually supported API-usage. It's hard to tell whether it is.
Of course we still use our own "old" demux_packet struct, just so that
libav* API usage is somewhat isolated.
Use OPT_KEYVALUELIST() for all places where AVOptions are directly set
from mpv command line options. This allows escaping values, better
diagnostics (also no more "pal"), and somehow reduces code size.
Remove the old crappy option parser (av_opts.c).
This happens apparently randomly with rtmp:// and after seeks. This
eventually leads to audio decoding returning an EOF status, which
basically disables audio sync. This will lead to audio desync, even if
audio decoding later "recovers" when the demuxer actually returns audio
packets.
Hack-fix this by special-casing EAGAIN.
This didn't work, because the timebase was wrong. According to the
ffmpeg doxygen, if the stream index is -1 (which is what we used), the
timebase is AV_TIME_BASE. But this didn't work, and it really expected
the stream's timebase. Quite "surprising", since this feature
(avio_seek_time) is used by rtmp only.
Fixing this properly is too hard, so hack-fix our way around it.
STREAM_CTRL_SEEK_TO_TIME is also used by DVD/BD, so a new
STREAM_CTRL_AVSEEK is added. We simply pass-through the request
verbatim.
The old FFmpeg API and the new Libav API disagree about mp4 display
rotation direction. Well, whatever, fix it trial-and-error-style.
CC: @mpv-player/stable: add
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
For OGG audio files, we usually merge the per-stream metadata back to
the file-global metadata. Don't do that for OGM, because with OGM most
metadata is actually per-stream.
