A file with the ambiguous extension .sub could be either VOBsub or
MicroDVD. If there's a corresponding .idx file it's certainly VOBsub,
so don't add it to the list of potential text subtitles. This will
avoid the annoying warning "SUB: Could not determine file format".
Allow specifying a custom separator character for options of string
list type, and use that to define OPT_PATHLIST which takes a list of
strings separated by ':' (or ';' on Windows).
Analogously to the previous commit, move path handling logic for
loading external vobsub files from mplayer.c to find_subfiles.c.
Based on a commit from Clément Bœsch but fixed and simplified.
Move path handling for loading external subtitle files from mplayer.c
to find_subfiles.c. Now the remaining code in mplayer.c only gets a
list of potential filenames and tries opening those.
Move sub_filenames() and related code from subreader.c to new file
find_subfiles.c. This function is used to find subtitle files that
should be loaded for the current video; this functionality is not
specific to the particular kind of text subtitle handling implemented
in subreader.c.
Also reindent and prettify the moved code a bit.
There is no reason to use manual language list splitting when an
automatic split function is already available.
Some types change from "unsigned char" to "char", but this shouldn't
cause issues since [as]lang settings are unlikely to have characters
above 127.
Change MP_IMGFLAG_ACCEPT_STRIDE to MP_IMGFLAG_ACCEPT_ALIGNED_STRIDE in
get_buffer() as various FFmpeg assembly routines assume aligned input.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33097 b3059339-0415-0410-9bf9-f77b7e298cf2
VDPAU hardware decoding does not support colorspaces other than 4:2:0.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33096 b3059339-0415-0410-9bf9-f77b7e298cf2
Add the various decoders to codecs.conf and increase the maximum
number of buffered pts in stheader.h (apparently CrystalHD can have
very high decoder lag).
Patch by Philip Langdale, philipl overt org
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33095 b3059339-0415-0410-9bf9-f77b7e298cf2
Support 'lpcm' in mov files, has audible (clipping?) artefacts on some
systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33075 b3059339-0415-0410-9bf9-f77b7e298cf2
Support 32bit big endian float pcm in aiff.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33076 b3059339-0415-0410-9bf9-f77b7e298cf2
Audio with all codec tags other than 0x2000 was byte-swapped, while
only "dnet" should be.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33028 b3059339-0415-0410-9bf9-f77b7e298cf2
Libavcodec has no parser that would work on byte-swapped AC3, but at
least don't run the normal AC-3 one which would only break things.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33026 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33027 b3059339-0415-0410-9bf9-f77b7e298cf2
Support audio in Leitch/Harris' VR native stream format (LXF).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32990 b3059339-0415-0410-9bf9-f77b7e298cf2
Support dvvideo in Leitch/Harris' VR native stream format (LXF).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32991 b3059339-0415-0410-9bf9-f77b7e298cf2
Add ID_DVD_TITLE_x_CHAPTERS and ID_DVD_CURRENT_TITLE to the output of
dvdnav:// -identify.
Patch by Mike Castle, dalgoda+mplayer A gmail
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32982 b3059339-0415-0410-9bf9-f77b7e298cf2
When reading from a stream fails, try one more time after a reset.
This should re-establish for example timed-out network connections.
Fixes bug #1841.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32954 b3059339-0415-0410-9bf9-f77b7e298cf2
100l, fix incorrect len when retrying read.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32957 b3059339-0415-0410-9bf9-f77b7e298cf2
Improve stream reset on read error, should now fix bug #1841 in more
cases, e.g. also with -cache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32977 b3059339-0415-0410-9bf9-f77b7e298cf2
Add ugly hack to compensate DVDNAV's ugly hacks and fix seeking.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33122 b3059339-0415-0410-9bf9-f77b7e298cf2
The "gamma" setting only changed red gamma. Fix it to change all of
red, green and blue gamma.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32895 b3059339-0415-0410-9bf9-f77b7e298cf2
At least for Wing Commander 4 files, -demuxer lavf is needed to
play XAN DPCM audio (while Wing Commander 3 avi plays fine with
-demuxer avi, although it also contains the video codec we call "XAN
wc4").
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32894 b3059339-0415-0410-9bf9-f77b7e298cf2
None of the calling sites to stream_write_buffer were checking the
return value to see if all bytes got written (nothing in current code
actually calls it any more after MEncoder was removed).
This was causing (very occasionally) problems with mencoder when using
output pipes AND running under a sandbox or when being straced (ptrace
is the culprit). Theoretically this problem can happen without pipes
or ptrace.
Only stream_file, stream_smb and stream_ffmpeg implement
write_buffer and ffmpeg already handles this internally.
Original patch by Sang-Uok Kum.
Signed-off-by: Tobias Diedrich <ranma@google.com>
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32881 b3059339-0415-0410-9bf9-f77b7e298cf2
Add option -osd-fractions which enables display of fractional seconds
when showing the current playback time on OSD.
Based on a patch from Christian <herr.mitterlehner@gsmpaaiml.com> but
with several modifications.
Make the outside interface of audio output handling similar to the
video output one. An AO object is first created, and then methods
called with ao_[methodname](ao, args...). However internally libao2/
still holds all data in globals, and trying to create multiple
simultaneous AO instances won't work.
* edl:
core: support timeline with audio-only files
core: wake up a bit less often for audio-only files
core: audio: cut audio writes at end of timeline part
EDL: add support for new EDL file format
stream.[ch], ass_mp: new stream function for whole-file reads
tl_matroska.c: move the find_files() function here
bstr.[ch], path.[ch]: add string and path handling functions
core: ordered chapters: move timeline creation to timeline/
options: drop support for numeric -demuxer values
cleanup: demuxer.[ch]: remove unused code, make functions static
cleanup: reindent demuxer.h, use struct names for types
libavformat returns nonsense per-stream bitrate values for some MPEG
files (0 or many times higher than the overall bitrate of the file),
which triggered the heuristic to enable byte-based seeking in
demux_lavf and then made the byte-based seeks wildly inaccurate.
Disable the support for byte-based seeks. This will avoid problems
with files that have consistent timestamps, but on the other hand will
completely break seeking in MPEG files that have timestamp resets.
I'll probably add at least an option to manually enable byte-based
seeking later.
After creating a video window the common X code waited for a MapNotify
event before proceeding. This meant that if the window was opened on
another workspace the player would be stuck until the user switched to
that workspace and the window could become actually visible. Remove
this waiting code. I don't know why it was there or if it was actually
beneficial/needed for some setup (at least common uses seem to work
fine without it); it comes from the earliest MPlayer versions visible
in VCS history.
Cut audio data written to AO at the point where current timeline part
ends (before, AO buffers were always completely filled, but playback
of the "extra" audio was then cut short by resetting the AO when
switching timeline parts). This doesn't make much difference for
current playback behavior, but will be used by timeline support for
audio-only files and is necessary for future encoding support where
"playback" of written audio cannot be aborted later.
The timeline code previously added to support Matroska ordered
chapters allows constructing a playback timeline from segments picked
from multiple source files. Add support for a new EDL format to make
this machinery available for use with file formats other than Matroska
and in a manner easier to use than creating files with ordered
chapters.
Unlike the old -edl option which specifies an additional file with
edits to apply to the video file given as the main argument, the new
EDL format is used by giving only the EDL file as the file to play;
that file then contains the filename(s) to use as source files where
actual video segments come from. Filename paths in the EDL file are
ignored. Currently the source files are only searched for in the
directory of the EDL file; support for a search path option will
likely be added in the future.
Format of the EDL files
The first line in the file must be "mplayer EDL file, version 2".
The rest of the lines belong to one of these classes:
1) lines specifying source files
2) empty lines
3) lines specifying timeline segments.
Lines beginning with '<' specify source files. These lines first
contain an identifier used to refer to the source file later, then the
filename separated by whitespace. The identifier must start with a
letter. Filenames that start or end with whitespace or contain
newlines are not supported.
On other lines '#' characters delimit comments. Lines that contain
only whitespace after comments have been removed are ignored.
Timeline segments must appear in the file in chronological order. Each
segment has the following information associated with it:
- duration
- output start time
- output end time (= output start time + duration)
- source id (specifies the file the content of the segment comes from)
- source start time (timestamp in the source file)
- source end time (= source start time + duration)
The output timestamps must form a continuous timeline from 0 to the
end of the last segment, such that each new segment starts from the
time the previous one ends at. Source files and times may change
arbitrarily between segments.
The general format for lines specifying timeline segments is
[output time info] source_id [source time info]
source_id must be an identifier defined on a '<' line. Both the time
info parts consists of zero or more of the following elements:
1) timestamp
2) -timestamp
3) +duration
4) *
5) -*
, where "timestamp" and "duration" are decimal numbers (computations
are done with nanosecond precision). Whitespace around "+" and "-" is
optional. 1) and 2) specify start and end time of the segment on
output or source side. 3) specifies duration; the semantics are the
same whether this appears on output or source side. 4) and 5) are
ignored on the output side (they're always implicitly assumed). On the
source side 4) specifies that the segment starts where the previous
segment _using this source_ ended; if there was no previous segment
time 0 is used. 5) specifies that the segment ends where the next
segment using this source starts.
Redundant information may be omitted. It will be filled in using the
following rules:
- output start for first segment is 0
- two of [output start, output end, duration] imply third
- two of [source start, source end, duration] imply third
- output start = output end of previous segment
- output end = output start of next segment
- if "*", source start = source end of earlier segment
- if "-*", source end = source start of a later segment
As a special rule, a last zero-duration segment without a source
specification may appear. This will produce no corresponding segment
in the resulting timeline, but can be used as syntax to specify the
end time of the timeline (with effect equal to adding -time on the
previous line).
Examples:
----- begin -----
mplayer EDL file, version 2
< id1 filename
0 id1 123
100 id1 456
200 id1 789
300
----- end -----
All segments come from the source file "filename". First segment
(output time 0-100) comes from time 123-223, second 456-556, third
789-889.
----- begin -----
mplayer EDL file, version 2
< f filename
f 60-120
f 600-660
f 30- 90
----- end -----
Play first seconds 60-120 from the file, then 600-660, then 30-90.
----- begin -----
mplayer EDL file, version 2
< id1 filename1
< id2 filename2
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
+10 id1 *
+10 id2 *
----- end -----
This plays time 0-10 from filename1, then 0-10 from filename1, then
10-20 from filename1, then 10-20 from filename2, then 20-30 from
filename1, then 20-30 from filename2.
----- begin -----
mplayer EDL file, version 2
< t1 filename1
< t2 filename2
t1 * +2 # segment 1
+2 t2 100 # segment 2
t1 * # segment 3
t2 *-* # segment 4
t1 3 -* # segment 5
+0.111111 t2 102.5 # segment 6
7.37 t1 5 +1 # segment 7
----- end -----
This rather pathological example illustrates the rules for filling in
implied data. All the values can be determined by recursively applying
the rules given above, and the full end result is this:
+2 0-2 t1 0-2 # segment 1
+2 2-4 t2 100-102 # segment 2
+0.758889 4-4.758889 t1 2-2.758889 # segment 3
+0.5 4.4758889-5.258889 t2 102-102.5 # segment 4
+2 5.258889-7.258889 t1 3-5 # segment 5
+0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6
+1 7.37-8.37 t1 5-6 # segment 7
Remove code that tries to select audio track during demuxer
initialization from demux_mkv and demux_lavf. Just leave audio
disabled at that point; the higher-level select_audio() function will
call the demuxer to switch track later anyway.
Removing this unneeded code also fixes use of these demuxers as the
main demuxer with -audiofile. Before the automatic track selection
would have enabled an audio track (if the file had any); as the main
demuxer was not used for audio the unused packets from this enabled
track would accumulate until they reached queue size limits.
