mpv has a very weak and very annoying policy that determines whether a
playlist should be used or not. For example, if you play a remote
playlist, you usually don't want it to be able to read local filesystem
entries. (Although for a media player the impact is small I guess.)
It's weak and annoying as in that it does not prevent certain cases
which could be interpreted as bad in some cases, such as allowing
playlists on the local filesystem to reference remote URLs. It probably
barely makes sense, but we just want to exclude some other "definitely
not a good idea" things, all while playlists generally just work, so
whatever.
The policy is:
- from the command line anything is played
- local playlists can reference anything except "unsafe" streams
("unsafe" means special stream inputs like libavfilter graphs)
- remote playlists can reference only remote URLs
- things like "memory://" and archives are "transparent" to this
This commit does... something. It replaces the weird stream flags with a
slightly clearer "origin" value, which is now consequently passed down
and used everywhere. It fixes some deviations from the described policy.
I wanted to force archives to reference only content within them, but
this would probably have been more complicated (or required different
abstractions), and I'm too lazy to figure it out, so archives are now
"transparent" (playlists within archives behave the same outside).
There may be a lot of bugs in this.
This is unfortunately a very noisy commit because:
- every stream open call now needs to pass the origin
- so does every demuxer open call (=> params param. gets mandatory)
- most stream were changed to provide the "origin" value
- the origin value needed to be passed along in a lot of places
- I was too lazy to split the commit
Fixes: #7274
In some corner cases (see #6802), it can be beneficial to use a larger
stream buffer size. Use this as argument to rewrite everything for no
reason.
Turn stream.c itself into a ring buffer, with configurable size. The
latter would have been easily achievable with minimal changes, and the
ring buffer is the hard part. There is no reason to have a ring buffer
at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and
some subtle issues with demux_mkv.c wanting to seek back by small
offsets (the latter was handled with small stream_peek() calls, which
are unneeded now).
In addition, this turns small forward seeks into reads (where data is
simply skipped). Before this commit, only stream_skip() did this (which
also mean that stream_skip() simply calls stream_seek() now).
Replace all stream_peek() calls with something else (usually
stream_read_peek()). The function was a problem, because it returned a
pointer to the internal buffer, which is now a ring buffer with
wrapping. The new function just copies the data into a buffer, and in
some cases requires callers to dynamically allocate memory. (The most
common case, demux_lavf.c, required a separate buffer allocation anyway
due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_*
changes.
I'm not happy with this. There still isn't a good reason why there
should be a ring buffer, that is complex, and most of the time just
wastes half of the available memory. Maybe another rewrite soon.
It also contains bugs; you're an alpha tester now.
This partially reverts commit a9d83eac40
("Remove optical disc fancification layers").
Mostly due to the timestamp crap, this was never really going to work.
The playback layer is sensitive to timestamps, and derives the playback
time directly from the low level packet timestamps. DVD/BD works
differently, and libdvdnav/libbluray do not make it easy at all to
compensate for this. Which is why it never worked well, but not doing it
at all is even more awful.
demux_disc.c tried this and rewrote packet timestamps from low level TS
to playback time. So restore demux_disc.c, which should bring behavior
back to the old often non-working but slightly better state.
I did not revert anything that affects components above the demuxer
layer. For example, the properties for switching DVD angles or listing
disc titles are still gone. (Disc titles could be reimplemented as
editions. But not by me.)
This commit modifies the reverted code a bit; this can't be avoided,
because the internal API changed quite a bit. The old seek resync in
demux_lavf.c (which was a hack) is replaced with a hack. SEEK_FORCE and
demux_params.external_stream are new additions.
Some of this could/should be further cleaned up. If you don't want
"proper" DVD/BD support to disappear, you should probably volunteer.
Now why am I wasting my time for this? Just because some idiot users are
too lazy to rip their ever-wearing out shitty physical discs? Then why
should I not be lazy and drop support completely? They won't even be
thankful for me maintaining this horrible garbage for no compensation.
This removes anything related to DVD/BD/CD that negatively affected the
core code. It includes trying to rewrite timestamps (since DVDs and
Blurays do not set packet stream timestamps to playback time, and can
even have resets mid-stream), export of chapters, stream languages,
export of title/track lists, and all that.
Only basic seeking is supported. It is very much possible that seeking
completely fails on some discs (on some parts of the timeline), because
timestamp rewriting was removed.
Note that I don't give a shit about optical media. If you want to watch
them, rip them. Keeping some bare support for DVD/BD is the most I'm
going to do to appease the type of lazy, obnoxious users who will care.
There are other players which are better at optical discs.
The demuxer cache is the only cache now. Might need another change to
combat seeking failures in mp4 etc. The only bad thing is the loss of
cache-speed, which was sort of nice to have.
Them being separate is just dumb. Replace them with a single
demux_free() function, and free its stream by default. Not freeing the
stream is only needed in 1 special case (demux_disc.c), use a special
flag to not free the stream in this case.
The properties/commands touched in this commit are all for obscure
special inputs (BD/DVD/DVB/TV), and they all block on the demuxer/stream
layer. For network streams, this blocking is very unwelcome. They will
affect playback and probably introduce pauses and frame drops. The
player can even freeze fully, and the logic that tries to make playback
abortable even if frozen complicates the player.
Since the mentioned accesses are not needed for network streams, but
they will block on network streams even though they're going to fail,
add a flag that coarsely enables/disables these accesses. Essentially it
establishes a whitelist of demuxers/streams which support them.
In theory you could to access BD/DVD images over network (or add such
support, I don't think it's a thing in mpv). In these cases these
controls still can block and could even "freeze" the player completely.
Writing to the "program" and "cache-size" properties still can block
even for network streams. Just don't use them if you don't want freezes.
It seems like adjusting the raw stream ID should be done only for DVD.
Otherwise, getting the subtitle language for Bluray breaks.
Untested. Regression since fb9a32977d.
Fixes#4611 (probably).
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
This is more uniform, and potentially gets rid of some past copyrights.
It might be that this subtly changes caching behavior (it seems before
this, it synced to the demuxer if the length was unknown, which is not
what we want.)
Because it's kind of dumb. (But not sure if it was worth the trouble.)
For stream_file.c, we add new explicit fields. The rest are rather
special uses and can be killed by comparing the stream impl. name.
The changes to DVD/BD/CD/TV are entirely untested.
When switching tracks, we normally have the problem that data gets lost
due to readahead buffering. (Which in turn is because we're stubborn and
instruct the demuxers to discard data on unselected streams.) The
demuxer layer has a hack that re-reads discarded buffered data if a
stream is enabled mid-stream, so track switching will seem instant.
A somewhat similar problem is when all tracks of an external files were
disabled - when enabling the first track, we have to seek to the target
position.
Handle these with the same mechanism. Pass the "current time" to the
demuxer's stream switch function, and let the demuxer figure out what to
do. The demuxer will issue a refresh seek (if possible) to update the
new stream, or will issue a "normal" seek if there was no active stream
yet.
One case that changes is when a video/audio stream is enabled on an
external file with only a subtitle stream active, and the demuxer does
not support rrefresh seeks. This is a fuzzy case, because subtitles are
sparse, and the demuxer might have skipped large amounts of data. We
used to seek (and send the subtitle decoder some subtitle packets
twice). This case is sort of obscure and insane, and the fix would be
questionable, so we simply don't care.
Should mostly fix#3392.
Ever since a change in mplayer2 or so, relative seeks were translated to
absolute seeks before sending them to the demuxer in most cases. The
only exception in current mpv is DVD seeking.
Remove the SEEK_ABSOLUTE flag; it's not the implied default. SEEK_FACTOR
is kept, because it's sometimes slightly useful for seeking in things
like transport streams. (And maybe mkv files without duration set?)
DVD seeking is terrible because DVD and libdvdnav are terrible, but
mostly because libdvdnav is terrible. libdvdnav does not expose seeking
with seek tables. (Although I know xbmc/kodi use an undocumented API
that is not declared in the headers by dladdr()ing it - I think the
function is dvdnav_jump_to_sector_by_time().) With the current mpv
policy if not giving a shit about DVD, just revert our half-working seek
hacks and always use dvdnav_time_search(). Relative seeking might get
stuck sometimes; in this case --hr-seek=always is recommended.
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
This is mainly a refactor. I'm hoping it will make some things easier
in the future due to cleanly separating codec metadata and stream
metadata.
Also, declare that the "codec" field can not be NULL anymore. demux.c
will set it to "" if it's NULL when added. This gets rid of a corner
case everything had to handle, but which rarely happened.
The demuxer infrastructure was originally single-threaded. To make it
suitable for multithreading (specifically, demuxing and decoding on
separate threads), some sort of tripple-buffering was introduced. There
are separate "struct demuxer" allocations. The demuxer thread sets the
state on d_thread. If anything changes, the state is copied to d_buffer
(the copy is protected by a lock), and the decoder thread is notified.
Then the decoder thread copies the state from d_buffer to d_user (again
while holding a lock). This avoids the need for locking in the
demuxer/decoder code itself (only demux.c needs an internal, "invisible"
lock.)
Remove the streams/num_streams fields from this tripple-buffering
schema. Move them to the internal struct, and protect them with the
internal lock. Use accessors for read access outside of demux.c.
Other than replacing all field accesses with accessors, this separates
allocating and adding sh_streams. This is needed to avoid race
conditions. Before this change, this was awkwardly handled by first
initializing the sh_stream, and then sending a stream change event. Now
the stream is allocated, then initialized, and then declared as
immutable and added (at which point it becomes visible to the decoder
thread immediately).
This change is useful for PR #2626. And eventually, we should probably
get entirely of the tripple buffering, and this makes a nice first step.
Commit 127da161 was not properly tested either - it did nothing, and
just made it use the video bitstream aspect ratio determined by
libavformat (which isn't always the correct one).
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
This has no reason to be there. Put the functionality into another
function instead. While we're at it, also adjust for possible accuracy
issues with high bit depth YUV (matters for rendering subtitles into
screenshots only).
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
MPlayer traditionally had completely separate sh_ structs for
audio/video/subs, without a good way to share fields. This meant that
fields shared across all these headers had to be duplicated. This commit
deduplicates essentially the last remaining duplicated fields.
The only reason why cdda:// goes through this wrapper-demuxer is so that
we add chapters to it. Most things related to seeking apply only to
DVD/BD, and in fact broke CDDA sekkability.
Fixes#1555.
Pass through the seek flags to the stream layer. The STREAM_CTRL
semantics become a bit awkward, but that's still the least awkward
part about optical disc media.
Make demux_disc.c request relative seeks. Now the player will use
relative seeks if the user sends relative seek commands, and the
demuxer announces it wants these by setting rel_seeks to true. This
change probably changes seek behavior for dvd, dvdnav, bluray, cdda,
and possibly makes seeking useless if the demuxer-cache is set to
a high value.
Will be used in the next commit. (Split to make reverting the next
commit easier.)
This was completely breaking any low-level caching. Change it so that at
least demuxer caching will work.
Do this by using the metadata cache mechanism to funnel through the menu
commands.
For some incomprehensible reason, I had to reorder the events (which
affects their delivery priority), or they would be ignored. Probably
some crap about the event state being cleared before it could be
delivered. I don't give a shit.
All this code sucks. It would probably be better to let discnav.c access
the menu event "queue" directly, and to synchronize access with a mutex,
instead of going through all the caching layers, making things
complicated and slow.
Instead of defining a separate data structure in the core.
For some odd reason, demux_chapter exported the chapter time in
nano-seconds. Change that to the usual timestamps (rename the field
to make any code relying on this to fail compilation), and also remove
the unused chapter end time.
Commit 50e131b43e happened to make it work for DVD (because the higher
bits of the ID are masked in the DVD case), but failed for Bluray. This
probably fixes it, although I don't have a sample to multiple streams to
confirm it really does it right.
CC: @mpv-player/stable
When flushing the AVIOContext, make sure it can't seek back to discarded
data. buf_ptr is just the current read position, while buf_end - buffer
is the actual buffer size. Since mpegts.c is littered with seek calls,
it might be that the ability to seek could read
Mark the stream (which the demuxer uses) as not seekable. The cache can
enable seeking again (this behavior is sometimes useful for other
things). I think this should have had no bad influence in theory, since
seeking BD/DVD first does the "real" seek, then flushes libavformat and
reads new packets.
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
libdvdnav can actually jump into the middle of the DVD (e.g. scene
selection menus do that). Then time display is incorrect: we start from
0, even though playback time is somewhere else. This really matters when
seeking. If the display time mismatches, a small relative seek will
apparently jump to the beginning of the movie.
Fix this by initializing the PTS stuff on opening. We have to do this
after some small amount of data has been read from the stream (because
libdvdnav is crap and doesn't always update the time between seeks and
the first read; also see STREAM_CTRL_GET_CURRENT_TIME remarks in
cache.c; although this was not observed when testing with scene
selection menus). On the other hand, we want to do it before opening the
demuxer, because that will read large amounts of data and likely will
change the stream position.
Also see commit 49813670.
Technically needed, but not strictly. It seems it works without in
practice, because demux_lavf.c reads exactly one packet for fill_buffer
call, so there are never packets queued.
We used a complicated and approximate method to cache the stream
timestamp, which is basically per-byte. (To reduce overhead, it was only
cached per 8KB-block, so it was approximate.)
Simplify this, and read/keep the timestamp only on discontinuities. This
is when demux_disc.c actually needs the timestamp.
Note that caching is currently disabled for dvdnav, but we still read
the timestamp only after some data is read. libdvdread behaves well, but
I don't know about libbluray, and the previous code also read the
timestamp only after reading data, so try to keep it safe.
Also drop the start_time offset. It wouldn't be correct anymore if used
with the cache, and the idea behind it wasn't very sane either (making
the player to offset the initial playback time to 0).
This should work now, at least kind of. Note that actual success depends
on the behavior of the underlying lib{dvd{nav,read},bluray}
implementation, which could go very wrong.
In the worst case, it could happen that the underlying implementation
seeks a long time before the seek target time. In this case, the player
will just decode video until the target time is reached, even if that
requires e.g. decoding 30 mintues of video before refreshing.
In the not-so-bad but still bad case, it would just miss the seek
target, and seek past it.
In my tests, it works mostly ok, though. Seeking backwards usually
fails, unless something like --hr-seek-demuxer-offset=1 is used (this
makes it seek to 1 second before the target, which may or may not be
enough to compensate for the DVD/BD imprecision).
This is a pretty big change. Instead of doing a half-hearted passthrough
of the playback timestamp, we attempt to rewrite the raw MPEG timestamps
such that they match with the playback time.
We add the offset between raw start timestamp and playback time to the
packet timestamps. This is the easy part; but the problem is with
timestamp resets. We simply detect timestamp discontinuities by checking
whether they are more than 500ms apart (large enough for all video
faster than 2 FPS and audio with reasonable framesizes/samplerates), and
adjust the timestamp offset accordingly.
This should work pretty well. There may be some problems with subtitles.
If the first packet after a timestamp reset is a subtitle instead of
video, it will fail. Also, selecting multiple audio or video streams
won't work (but mpv doesn't allow selecting several anyway). Trying to
demux subtitles with no video stream enabled will probably fail.
Untested with Bluray, because I have no Bluray sample.
Background:
libdvdnav/libdvdread/libbluray make this relatively hard. They return a
raw MPEG (PS/TS) byte stream, and additionally to that provide a
function to retrieve the current "playback" time. The playback time is
what should be displayed to the user, while the MPEG timestamps can be
completely different. Even worse, the MPEG timestamps can reset. Since
we use the libavformat demuxer (instead of parsing the MPEG packets in
the DVD/BD code), it's hard to associate between these timestamps. As a
result, the time display is special cased in the playloop, and of low
quality (updates only all 1 or 2 seconds, sometimes is incorrect). The
fact that the stream cache can be between demuxer and the stream source
makes things worse.
All the libs seem to provide an event that tells whether timestamps are
resetting. But since this signalling is byte based, it's hard to connect
it to the demuxed MPEG packets. It might be possible to create some sort
of table mapping file positions to discontinuities and new timestamps.
(For simplicity, this table could be 2 entries large, sufficient to
catch all discontinuities if the distance between them is larger than
the total buffering.)
