since there are different views on what ontop is, we make the ontop
window level modifiable. at the moment only support for macOS was added.
the default for macOS was changed from 'system' to 'window' since this
fixes an unwanted behaviour in fullscreen and in general causes less
issues with expected behaviour.
Fixes#2376#3974
To make it easier for the eyes, multi line subtitles should
be left justified (for most languages).
This adds an option to define how subtitles are to be justified
inpendently of how they are aligned.
Also add option to enable --sub-justify to be applied on ASS subtitles.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
vo_opengl used to have it as sub-option, which made it very hard to pass
down option values to backends in a generic way (even if these options
were completely backend-specific). For --opengl-dcomposition we used a
VOFLAG to deal with this. Fortunately, sub-options are gone, and we can
just add it as global option.
Move the option to context_angle.c and add it as global option. I
thought about adding a mechanism to let backends declare options, which
would get magically picked up my m_config instead of having to add them
to the global option list manually (similar to VO vo_driver.options),
but decided against this complexity just for 1 or 2 backends. Likewise,
it could have been added as a single option to avoid the boilerplate of
an option struct, but then again there are probably going to be more
angle suboptions, and it's cleaner.
Since for mpv CLI, the player state is a singleton, full prefetching is
a bit tricky. We do it only on the demuxer layer.
The implementation reuses the old "open thread". This means there is
significant potential for regressions even if the new option is not
used. This is made worse by the fact that I barely tested this code.
The generic mpctx_run_reentrant() wrapper is also removed - this was its
only user, and its remains become part of the new implementation.
Introduce the --opengl-hwdec-interop option, which replaces
--hwdec-preload. The new option allows explicit selection of the interop
backend.
This is relatively complex, and I would have preferred not to add this,
but it's probably useful to debug certain problems. In exchange, the
"new" option documents that pretty much any but the simplest use of it
will not be forward compatible.
Remove ad_spdif from the normal codec list, and select it explicitly.
One goal was to decouple this from the normal codec selection, so
they're less entangled and the decoder selection code can be simplified
in the far future. This means spdif codec selection is now done
explicitly via select_spdif_codec(). We can also remove the weird
requirements on "dts" and "dts-hd" for the --audio-spdif option, and it
can just do the right thing.
Now both video and audio codecs consist of a single codec family each,
vd_lavc and ad_lavc.
this replaces the old fullscreen with the native
macOS fullscreen. additional the
--fs-black-out-screens was removed since the new
API doesn't support it in a way the old one did.
it can possibly be re-added if done manually.
Fixes#2857#3272#1352#2062#3864
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
Deactivating this options makes it possible to
circumvent the default OS X behavior of using
points. Windows on HiDPI resolutions won't open
in double the size anymore and videos are display
in their native resolution when windowed.
Fixes#3716
Just that actually changing it at runtime won't do anything.
This deals with a nasty initialization order issue with encoding.
Encoding is initialized after options have initialized, but before
--load-scripts is checked and executed. Encoding initialization accesses
FFmpeg API, thus it has to run after FFmpeg is initialized (which also
implies it's initialized after options/logging init). On the other hand,
it sets the encoding builtin profile, which possibly sets --load-scripts
to "no". That failed at this point because --load-scripts was marked as
fixed.
Just marking it as not fixed gets rid of the headache, even if it's not
perfectly orthodox.
At this point, all other hwaccels provide -copy modes, and vdpau is the
exception with not having one. Although there is vf_vdpaurb, it's less
convenient in certain situations, and exposes some issues with the
filter chain code as well.
- Change connector selection to accept human readable names (such as
eDP-1, HDMI-A-2) rather than arbitrary numbers.
- Change GPU selection to accept GPU number rather than device paths.
- Merge connector and GPU selection into one --drm-connector.
- Add support for --drm-connector=help.
- Add support for --drm-* in EGL backend.
- Refactor KMS; reduce state sharing across drm_common.
Don't require special property code for handling updates, and simply use
the UPDATE_AUDIO flag instead. Also make runtime changes to
--audio-client-name take effect.
Rename the text subtitle options from --sub-text- to --sub-
and --ass- options to --sub-ass-.
The intention is to common sub options to prefixed --sub-
and special ASS option be seen as a special version of sub options.
The OSD options that work like the --sub- options are still named
--osd-.
Man page updated including a short note about renamed --sub-text-*
and --ass-* options to --sub-* and --sub-ass-*.
Move the screensaver enable/disable determination to a central place,
and call it if the stop-screensaver property is changed.
Also, do not stop the screensaver when in idle mode (i.e. no file is
loaded).
Fixes#3615.
I'm not sure if this option affects anything or if it's a placebo,
especially since the VO thread is now registered with MMCSS. Still, I
think --priority=high may have helped back when I used mplayer2 on a
netbook. It's also possible that encoding-mode users would want to set
--priority=idle.
Anyway, it was one of the last M_OPT_FIXED options, so fix that.
The intention of M_OPT_FIXED is to make options not runtime-changeable,
so trying to set them at runtime will always error. This is not wanted
for --profile and --include, for which there is no reason to block them
at runtime.
Fixes#3581.
Seems like this confused users quite often.
Instead of --profile=pseudo-gui, --player-operation-mode=pseudo-gui now
has to be used to invoke pseudo GUI mode. The old way still works, and
still behaves in the old way.
If one of the audio output format options is set, brually reinit the
audio chain.
Since the audio-channels property is still mapped to the deprecated
read-only property, "options/audio-channels" currently has to be used,
e.g. "cycle-values options/audio-channels 2 7.1".
With the merging of options and properties, the mpv_set_option()
function is close to being useless, and mpv_set_property() can be used
for everything instead. There are certain conflicts remaining, which are
explained in depth in the docs. For now, none of this should affect
existing code using the client API.
Make mpv_set_property() redirect to mpv_set_option() before
initialization.
Remove some options marked as M_OPT_FIXED. The "pause" and "speed"
options cannot be written anymore without the playloop being notified by
it, so the M_OPT_FIXED does nothing. For "vo-mmcss-profile", the problem
was lack of synchronization, which has been added. I'm not sure what the
problem was with "frames" - I think it was only marked as M_OPT_FIXED
because changing it during playback will have no effect. Except for
pause/speed, these changes are needed to make them writable as
properties after mpv_initialize().
Also replace all remaining uses of CONF_GLOBAL with M_OPT_FIXED.
Use the new mechanism, instead of wrapped properties. As usual, extend
the update handling to some options that were forgotten/neglected
before. Rename video_reset_aspect() to video_reset_params() to make it
more "general" (and we can amazingly include write access to
video-aspect as well in this).
A recent change merged the window-scaler option and property, but forgot
that the option is float for some reason, while the property uses
double. This led to undefined behavior. Fix it by changing the option
to double too.
Setting the osc or ytdl properties will now load/unload the associated
scripts. (For ytdl this does not mean the currently played URL will be
reloaded.)
Also add a changelog entry for this, which also covers the preceding
work for --terminal.
Remove wrapper properties for OSD and video position updates, use the
new mechanism for them. We can mark the options directly. Update
behavior will work for more options (since I've casually marked more
affected options than the old less direct mechanism covered).
So client API users don't have to care about whether to set this before
or after mpv_initialize().
We still don't enable terminal at any point before mpv_initialize(),
because reasons.
This also subtly changes some behavior how terminal options are applied
while parsing. This essentially reverts the behavior as it was reported
in issue #2588. Originally, I was hoping to get rid of the pre-parse
option pass, but it seems this is absolutely not possible due to the way
config and command line parsing are entangled. Command line options take
priority over configfile options, so they have to be applied later - but
we also want to apply logging and terminal options as specified on the
command-line, but _before_ parsing the config files. It has to be this
way to see config file error messages on the terminal, or to hide them
if --no-terminal is used. libmpv considerations also factor into this.
Extend the flag-based notification mechanism that was used via
M_OPT_TERM. Make the vo_opengl update mechanism use this (which, btw.,
also fixes compilation with OpenGL renderers forcibly disabled).
While this adds a 3rd mechanism and just seems to further the chaos, I'd
rather have a very simple mechanism now, than actually furthering the
mess by mixing old and new update mechanisms. In particular, we'll be
able to remove quite some property implementations, and replace them
with much simpler update handling. The new update mechanism can also
more easily refactored once we have a final mechanism that handles
everything in an uniform way.
--quiet can be always set - the playloop checks it whenever rendering
the status line. Nothing special about it.
The ytdl- options are simply refetched by the Lua script every time a
stream is opened, so it makes sense to be able to change them at runtime
as well.
The VO options don't have a real reason to be marked with it anymore.
Some properties had a different type from their equivalent options (such
as mute, volume, deinterlace, edition). This wasn't really sane, as raw
option values should be always within their bounds. On the other hand,
these properties use a different type to reflect runtime limits (such as
range of available editions), or simply to improve the "UI" (you don't
want to cycle throuhg the completely useless "auto" value when cycling
the "mute" property).
Handle this by making them always return the option type, but also
allowing them to provide a "constricted" type, which is used for UI
purposes. All M_PROPERTY_GET_CONSTRICTED_TYPE changes are related to
this.
One consequence is that you can set the volume property to arbitrary
high values just like with the --volume option, but using the "add"
command it still restricts it to the --volume-max range.
Also deprecate --chapter, as it is grossly incompatible to the chapter
property. We pondered renaming it to --chapters, or introducing a more
powerful --range option, but concluded that --start --end is actually
enough.
These changes appear to take care of the last gross property/option
incompatibilities, although there might still be a few lurking.
Conflicts with the "playlist-pos" property. They're really a bit too
different, and since the --playlist-pos option is relatively new and
obscure, just rename it to get this out of the way.
This meant "cannot be used as per-file option" (wrt. playlist items).
Doesn't make too much sense anymore, especially given how obscure
per-file options are.
This also lets you just do "mpv --hwdec file.mkv", with the minor caveat
that the legacy syntax "--hwdec val" or "-hwdec val" (without "=") does
not work as expected anymore.
Move the embedded string with the builtin profiles to a separate
builtin.conf file. This makes it easier to read and edit, and you can
also check it for errors with --include=etc/builtin.conf. (Normally
errors are hidden intentionally, because there's no way to output error
messages this early, and because some options might not be present on
all platforms or with all configurations.)
The cuvid decoder already knows how to copy back to system memory
if NV12 frames are requested, and this will happen if the decoder
is used without the hwdec.
For convenience, let's add a wrapper hwdec so people don't have
to explicitly pick the cuvid decoder if they want this behaviour.
Nvidia's "NvDecode" API (up until recently called "cuvid" is a cross
platform, but nvidia proprietary API that exposes their hardware
video decoding capabilities. It is analogous to their DXVA or VDPAU
support on Windows or Linux but without using platform specific API
calls.
As a rule, you'd rather use DXVA or VDPAU as these are more mature
and well supported APIs, but on Linux, VDPAU is falling behind the
hardware capabilities, and there's no sign that nvidia are making
the investments to update it.
Most concretely, this means that there is no VP8/9 or HEVC Main10
support in VDPAU. On the other hand, NvDecode does export vp8/9 and
partial support for HEVC Main10 (more on that below).
ffmpeg already has support in the form of the "cuvid" family of
decoders. Due to the design of the API, it is best exposed as a full
decoder rather than an hwaccel. As such, there are decoders like
h264_cuvid, hevc_cuvid, etc.
These decoders support two output paths today - in both cases, NV12
frames are returned, either in CUDA device memory or regular system
memory.
In the case of the system memory path, the decoders can be used
as-is in mpv today with a command line like:
mpv --vd=lavc:h264_cuvid foobar.mp4
Doing this will take advantage of hardware decoding, but the cost
of the memcpy to system memory adds up, especially for high
resolution video (4K etc).
To avoid that, we need an hwdec that takes advantage of CUDA's
OpenGL interop to copy from device memory into OpenGL textures.
That is what this change implements.
The process is relatively simple as only basic device context
aquisition needs to be done by us - the CUDA buffer pool is managed
by the decoder - thankfully.
The hwdec looks a bit like the vdpau interop one - the hwdec
maintains a single set of plane textures and each output frame
is repeatedly mapped into these textures to pass on.
The frames are always in NV12 format, at least until 10bit output
supports emerges.
The only slightly interesting part of the copying process is that
CUDA works by associating PBOs, so we need to define these for
each of the textures.
TODO Items:
* I need to add a download_image function for screenshots. This
would do the same copy to system memory that the decoder's
system memory output does.
* There are items to investigate on the ffmpeg side. There appears
to be a problem with timestamps for some content.
Final note: I mentioned HEVC Main10. While there is no 10bit output
support, NvDecode can return dithered 8bit NV12 so you can take
advantage of the hardware acceleration.
This particular mode requires compiling ffmpeg with a modified
header (or possibly the CUDA 8 RC) and is not upstream in ffmpeg
yet.
Usage:
You will need to specify vo=opengl and hwdec=cuda.
Note that hwdec=auto will probably not work as it will try to use
vdpau first.
mpv --hwdec=cuda --vo=opengl foobar.mp4
If you want to use filters that require frames in system memory,
just use the decoder directly without the hwdec, as documented
above.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
And introduce a global option which does this. Or more precisely, this
deprecates the global wasapi and coreaudio options, and adds a new one
that merges their functionality. (Due to the way the sub-option
deprecation mechanism works, this is simpler.)
Instead of requiring each VO or AO to manually add members to MPOpts and
the global option table, make it possible to register them automatically
via vo_driver/ao_driver.global_opts members. This avoids modifying
options.c/options.h every time, including having to duplicate the exact
ifdeffery used to enable a driver.
Whitelisting supported codecs is (probably) still better than just
allowing everything, given the weird FFmpeg API. I'm also assuming
Libav doesn't even have the codec ID, but I didn't check.
Also add a --teletext-page option, since otherwise it decodes every
teletext page and shows them in succession.
And yes, we can't use av_opt_set_int() - instead we have to set it as
string. Because FFmpeg's option system is terrible.
With the conversion from sub-options to global options, this becomes
useless. This change also comes slightly too soon, because not all VOs
have been changed yet.
vo_opengl sub-option were always rather annoying to handle. It seems
better to make them global options instead. This is simpler and easier
to use. The only disadvantage we are aware of is that it's not clear
that many/all of these new global options work with vo_opengl only.
--vo=opengl-hq is also deprecated.
There is extensive compatibility with the old behavior. One exception is
that --vo-defaults will not apply to opengl-hq (though with opengl it
still works). vo-cmdline is also dysfunctional and will be removed in a
following commit.
These changes also affect opengl-cb.
The update mechanism is still rather inefficient: it requires syncing
with the VO after each option change, rather than batching updates.
There's also no granularity (video.c just updates "everything", and if
auto-ICC profiles are enabled, vo_opengl.c will fetch them on each
update).
Most of the manpage changes were done by Niklas Haas <git@haasn.xyz>.
This is still rather basic.
run_reconfig() and run_control() update the options because it's needed
for panscan (and other video scaling options), and fullscreen, border,
ontop updates. In the old model, these options could be accessed only
while both playback thread and VO threads were locked (i.e. during
synchronous calls like vo_control()), so this should be sufficient in
order not to miss any updates. In the future, a more fine-grained update
mechanism could be added to handle these updates "exactly".
x11_common.c contains an evil hack, as I see no reasonable way to handle
this properly. The VO thread can't "lock" the main thread, so this is
not simple.
Make some existing properties behave more like options. This mostly
means they don't deny access if the associated component is not active,
but redirects to the option.
One kind of fishy change is that we apply --brightness etc. only if
they're not set to the default value. This won't necessarily work with
--vo=xv, but affects only cases where 1. the Xv adapter has been changed
to non-defaults, and 2. the user tries to reset them with mpv by passing
e.g. --brightness=0. We don't care about Xv, and the noted use-case is
dumb, so this change is acceptable.
Now options are accessible through the property list as well, which
unifies them to a degree.
Not all options support runtime changes (meaning affected components
need to be restarted for the options to take effects). Remove from the
manpage those properties which are cleanly mapped to options anyway.
From the user-perspective they're just options available through the
property interface.
Instead, add a hacky OPT_ASPECT option type, which only exists to accept
a "no" parameter, which in combination with the "--no-..." handling code
makes --no-video-aspect work again.
We can also remove the code in m_config.c, which only existed to make
"--no-aspect" (a deprecated alias) to work.
OPT_ALIAS redirects the options at a higher level, instead of
introducing "duplicate" options with different name but same backing
storage. This uses the OPT_REPLACED mechanisms - only the deprecation
warning had to be made conditional. Note that e.g. --no-video still
works, because the "--no-..." redirection and OPT_ALIAS are orthogonal.
The deprecated --sub -> --sub-file alias had to be dropped, because it
essentially conflicts with --no-sub. If anyone complains, this could
probably still be undone by letting m_config_find_negation_opt do a
special mapping for --no-sub. (Which would be dumb, but simple and
effective.)
Just a minor refactor along the planned option change. This commit will
make it easier to update (i.e. copy) the VO options without copying
_all_ options. For now, behavior should be equivalent, though.
(The VO options were put into a separate struct quite early - when all
global variables were removed from the source code. It wasn't clear
whether the separate struct would have any actual purpose, but it seems
it will now. Awesome, huh.)
Normally, OSD can be disabled with --osd-level=0. But this also disables
terminal OSD, and some users want _only_ the terminal OSD. Add
--video-osd=no, which essentially disables the video OSD.
Ideally, it should probably be possible to control terminal and video
OSD levels independently, but that would require separate OSD timers
(and other state) for both components, so don't do it. But because the
current situation isn't too ideal, add a threat to the manpage that
might be changed in the future.
Fixes#3387.
The --image-display-duration option controls how long an image is
displayed. It's also possible to display the image forever (until manual
user interaction stops playback).
With this, the core drops the old method to "drain" video (i.e. waiting
for the last frame duration on end of playback). Instead, we reuse
MPContext.time_frame. The old mechanism was disabled for non-images
anyway.
Fixes#3425.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
mixer.c didn't really deserve to be separate anymore, as half of its
contents were unnecessary glue code after recent changes. It also
created a weird split between audio.c and af.c due to the fact that
mixer.c could insert audio filters. With the code being in audio.c
directly, together with other code that unserts filters during runtime,
it will be possible to cleanup this code a bit and make it work like the
video filter code.
As part of this change, make the balance code work like the volume code,
and add an option to back the current balance value. Also, since the
balance semantics are unexpected for most users (panning between the
audio channels, instead of just changing the relative volume), and there
are some other volumes, formally deprecate both the old property and the
new option.
Drop the code for switching the volume options and properties between
af_volume and AO volume controls. interface-changes.rst mentions the
changes in detail.
Do this because this was exceedingly complex and had other problems as
well. It was also very hard to test. It's just not worth the trouble.
Some leftovers like AOCONTROL_HAS_PER_APP_VOLUME will be removed at a
later point.
Fixes#3322.
This uses the normal autoprobing rules like "auto", but rejects anything
that isn't flagged as copying data back to system memory.
The chunk in command.c was dead code, so remove it instead of updating
it.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
The "fs-only" choice sets the _NET_WM_BYPASS_COMPOSITOR to 1 if the
window is fullscreened, and 0 otherwise. (0 is specified to be the
implicit default - i.e. no change is requested in windowed mode.)
In particular, change the default to "fs-only".
Fixes#2582.
Flag that is set by default. Reseting it will result in mpv trying to fit
client area with video instead of the whole window with border and
decorations on the screen.
Marked as (Windows only) for now until it's implemented on other platforms.
--sub-ass=no / --ass=no still work, but --ass-style-override=strip is
preferred now. With this change, --ass-style-override can control all
the types of style overriding.
This uses ID3D11VideoProcessor to convert the video to a RGBA surface,
which is then bound to ANGLE. Currently ANGLE does not provide any way
to bind nv12 surfaces directly, so this will have to do.
ID3D11VideoContext1 would give us slightly more control about the
colorspace conversion, though it's still not good, and not available
in MinGW headers yet.
The video processor is created lazily, because we need to have the coded
frame size, of which AVFrame and mp_image have no concept of. Doing the
creation lazily is less of a pain than somehow hacking the coded frame
size into mp_image.
I'm not really sure how ID3D11VideoProcessorInputView is supposed to
work. We recreate it on every frame, which is simple and hopefully
doesn't affect performance.
It's pretty "unfriendly" and causes too many issues. (Probably. At least
they're more obvious to a user than e.g. broken frame timing.)
Potentially we could apply heuristics like applying this only on
fullscreen, but let's not. It's up to the user to configure this to
get best results.
Fixes#2997.
This commit adds the d3d11va-copy hwdec mode using the ffmpeg d3d11va
api. Functions in common with dxva2 are handled in a separate decode/d3d.c
file. A future commit will rewrite decode/dxva2.c to share this code.
JSON IPC works on Windows now, and although the transports for each
plaform have similar characteristics, they unfortunately have different
names (Unix domain sockets on Linux/Unix vs. named pipes on Windows.)
Hopefully this change better reflects the purpose of the option too,
since with --input-ipc-server, mpv acts as an IPC server that can
service many simultaneous clients (as opposed to --input-file, which can
only do one-to-one IPC.)
See --lavfi-complex option.
This is still quite rough. There's no support for dynamic configuration
of any kind. There are probably corner cases where playback might freeze
or burn 100% CPU (due to dataflow problems when interaction with
libavfilter).
Future possible plans might include:
- freely switch tracks by providing some sort of default track graph
label
- automatically enabling audio visualization
- automatically mix audio or stack video when multiple tracks are
selected at once (similar to how multiple sub tracks can be selected)
This is probably the 3rd time the user-visible behavior changes. This
time, switch back because not normalizing seems to be the more expected
behavior from users.
Too many problems. Well, actually it's just Linux audio systems which
cause problems, and exclusive audio access on other platforms.
In any case, it seems you have to do some manual configuration if you
want multichannel audio output.
This is labeled as "name of the service in broadcasting (channel name)"
and exported as a generic tag by avformat-demuxers, notably lavf
when handling mpegts-streams from DVB.
