Semantics a bit questionable. This is done for the OSC (next commit),
and a comment added the manpage explicitly states this. Meaning this is
probably garbage and needs to revisit when the OSC changes and/or
someone wants to use this margin feature for something else.
Not sure about the subtitle thing. It's imaginable that someone uses
these options to create empty borders for subtitles on the bottom, so
subtitles should be located there. On the other hand, this gives a
rather unpolished user experience when using the (later added) OSC
feature to not overlap with the video. There's not much of a point if
the OSC still overlaps the video. However, I'm too lazy to think about
this, so it stays like it is.
--video-margin-ratio-left=0.2 --video-margin-ratio-right=0.9 (added in
the the next commit) will set f_w to inf, resulting in some garbage
being propagated. Later, the OSD margins are computed from values before
various sanity clamping is applied, which makes libass suffer from
bullshit values.
I'm very sure it's OK and more correct to compute the OSD margins using
the later values, but I'm not sure about that.
Quite chaotic history, which code being moved, refactored, duplicated,
unified a bunch of times. But I think everything is covered by LGPL
agreements.
In one case, cehoyos (who didn't agree) applied a patch by someone who
agreed, but didn't change anything (except weirdly adding German
translations). In another case, cehoyos moved code covered by LGPL
agreements (without changing it), which was later used for some other
code. We consider both cases not relevant for copyright.
win_state.c/.h is similar, but pending for reply by the author of
2ab259e68 (I guess).
The documentation claims that --video-unscaled will still perform
anamorphic adjustments, and it rightfully should. The current reality is
that it does not, because the video-unscaled size was based on the wrong
set of variables. (encoded width/height instead of nominal display
width/height)
In the past, --video-unscaled also disabled zooming and aspect ratio
corrections. But this didn't make much sense in terms of being a useful
option. The new behavior just sets the initial video size to be
unscaled, but it's still affected by zoom commands and aspect ratio
corrections.
To get the old behavior back, --video-aspect=0 --video-zoom=0 need to be
added as well (in the general case). Most of the time it should not make
a difference though.
Also, there seems to have been some additional dst_rect clamping code
inside src_dst_split_scaling that didn't seem to either be necessary nor
ever get triggered. (The code immediately above it already makes sure to
crop the video if it's larger than the dst_rect)
No idea why it was there, but I just removed it.
The past behavior was a bit weird, especially when zooming out. There
was no simple way to zoom in or out in consistent increments using
keybindings alone.
The new behavior preserves most of the old behavior's semantics but
scales out to infinity better. It coincidentally also makes it
really easy to get clean power of 2 ratios (e.g. 2x, 4x, 8x and their
inverses).
Fixes#3004.
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
For rotation, we assume that the source image will be rotated within the
VO, so the aspect/panscan code needs to calculate its param using
rotated coordinates. VOs which support rotation natively can use this.
Rename vo_get_src_dst_rects() to mp_get_src_dst_rects() and make it
independent from the VO (it takes a comical amount of parameters now to
pass all required state). Add a convenience wrapper with the name
vo_get_src_dst_rects() to vo.c. Replace all aspdat and vo usages with
immediate parameters.
Functionally, nothing should change, except that the window size is
clamped to a minimum of size 1 much earlier, and some log messages
change the prefix (don't bother with vo.vo_log stuff).
The plan is to make all the code in aspect.c independent from vo.c,
which should make the code easier to understand, will allow removal of
vo->aspdat, and reduces the amount of code that accesses weird mutable
struct vo fields.
For some reason, this made all VO backends both set the screen
resolution in opts->screenwidth/height, and call
aspect_save_screenres(). Remove the latter. Move the code to calculate
the PAR-corrected window size from aspect.c to vo.c, and make it so that
the monitor PAR is recalculated when it makes sense.
When using --monitoraspect, but either the screen width or height or
both are unknown, a fallback is applied. This is a completely useless
obscure corner case that's going to help nobody, so get it out of the
way.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
This option allowed you to extend the range of the panscan controls, so
that you could essentially use it to scale the video. This will be
replaced by a separate option to set the zoom factor directly.
This was bad, because it was the only aspdat member updated by
vo_get_src_dst_rects() instead of vo_reconfig(). Now it isn't
accessed anymore, so remove it.
This was probably enabled to guarantee that panscan is always reset in
windowed mode. However, the window size should be exactly the video size
in windowed mode, unless in cases where the user forcibly changed the
window size (e.g. --geometry). In the former case, panscan will have no
influence at all, and in the latter case we want it to have influence.
The code that is changed is responsible for scaling the video size to
display size, so that the resulting video rectangle is letter-boxed
inside the display window. This is before panscan calculations, which
can actually enlarge the video and make it larger than the display size
again. (src_dst_split_scaling() in vo.c takes cares of clipping the
video size to window size.)
I'm not sure why this rounding is done, as using panscan controls can
introduce odd sizes again. The rounding has been part of the code since
the initial commit. On the other hand, this rounding can slightly
influence the aspect ratio of the displayed image to the worse. It
forces the image to be scaled by an additional pixel, without actually
correcting the display size into the other direction.
Although video sizes are usually at least aligned on 2 (and often more),
odd sizes can still happen when playing e.g. anamorphic DVDs.
Remove the additional rounding.
(Note that we still round the _source_ image position and size when the
displayed image is larger than the screen, e.g. when panscan is used.
This is needed by some VOs so that the image source rectangle starts on
full chroma pixels. Maybe this rounding should be moved to the
respective VOs, which includes at least vo_direct3d.)
Remove lots of weird logic and dead code.
The only difference is that when specifying a monitor aspect ratio, it
will always upscale and never downscale.
Separate the video output options from the big MPOpts structure and also only
pass the new mp_vo_opts structure to the vo backend.
Move video_driver_list into mp_vo_opts
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
This also means the option is verified on program start, not when the VO
is created. The actual code becomes a bit more complex, because the
screen width/height is not available at program start.
The actual parsing code is still the same, with its unusual sscanf()
usage.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
wm4
Niklas Haas
rr-
Niklas Haas
Marcin Kurczewski
Stefano Pigozzi
Alexander Preisinger